Error: "Message short text 26 107 does not exist"

Hi DS Expert,
We've upgraded our DS from 3.2 into 4.2.
But sometimes several jobs fail with error: "Message short text 26 107 does not exist".
This error does not occur in DS 3.2.
Please help...
Thank you.

Hi,
Such a message seems to be SAP/BI related.
check wether you had shortdumps in your connected SAP system.
In DS there are no "long/medium/short-" texts stored.

Similar Messages

Error message FI 759: Fund does not exist in FM area

Hill!
I have to make a distribution in CO-OM (tr KSV5) according to fund
But if I customize fund as sender, choose fund from the fund catalog and make a formal chek of cycle I see an error message FI 759: Fund does not exist in FM area. How can I make it go away?

Hi Irina,
As per the note 489315, you must choose a layout that contains the exact data for the active objects.
When planning for non-FM company codes you will have to change the profile/layout that only contain the elements that are active in the company code.
If you encounter error: KAFF002 while doing the above then please can you see if point 3 of note 555134 will help to by-pass the message.
Once you add the field Fund and set it to optional you should be able to use planning.
Note 555134:
3. The fields of the Funds Management are defined as 'Required entry
    fields' in the standard layouts, in other words depending on the
    permissibility of the initial value for a field an entry is always
    demanded. To prevent this there are two options:
    a) Copy the desired standard layout into an own (transaction KP65,
       KPG5, OPO1) and via "Extras -> Variables -> Variables definition'
       set the corresponding field to 'Optional". Then, add this layout
       to your planner profile with transaction KP34.
    b) Implement the attached program ZK555134 (correction instruction
       461025). After the entry of planning area and layout all fields
       of the Funds Management are set depending on your selection of
       'Optional' or 'Not optional' (standard system). Like this you can
       also change standard layouts. The check for the fields for which
       'initial' is not a valid value is still carried out.
If you want to use FUND Accounting, I suggest you to read note 518610 for your reference. This note contains information about FUND Accounting and its effect.
If you only want to use 'Fund' in Funds Management, you do not have to activate the 'Fund' account assignment element.
If you activated the FUND account assignment element, which is at CLIENT level activation, the fund would always have to be filled as a required entry field in CO, FI-AA and HR for all company codes in the client concern.
Please also refer to notes 625262 and 659086.
or re-import the standard planning layout from the client 000. In the note 320197 is descriped how to do this.
I believe this will resolve your issue.
Best Regards,
Vanessa.

8i Error Message: Shared Memory Realm does Not exist

After I installed Oracle 8i Server on my PC. I could not logged in. I get this error message: Shared Memory Realm does Not exist.
Does anyone have this same problem before? Please Help!!
Thanks

I have the same problem on Oracle 817 installed on a dual processor PC on W2K
Again ! Do anyone know the prob ? ... thank's
<BLOCKQUOTE>quote:<HR>Originally posted by [email protected]:
After I installed Oracle 8i Server on my PC. I could not logged in. I get this error message: Shared Memory Realm does Not exist.
Does anyone have this same problem before? Please Help!!
Thanks<HR></BLOCKQUOTE>
null

Error message: local root folder does not exist

Greetings,
I'm working on a MacPro 2x2.66Ghz, running DW from CS2 and
through a strange combination of keyboard keystrokes while cleaning
my keyboard yesterday I inadvertantly renamed my hard drive "-OX"
from it's default. I can't seem to remember what the default name
of my hard drive was, but i think it was simply "Macintosh". I've
renamed it that, but on launching DW for the first time today I got
an error message saying that "The local root folder, web_content,
does not exist" and it gave me the option to manage sites and set
my local root folder again. Is there a way to re-establish my local
root folder for every site that I currently manage in one swipe, or
do I have to go in and manually do this for each and every Site
within my Files panel?
Thanks for your ideas,
Pedro

Actually, it solved one issue but seems to have created
another! So, at least now my Sites are all working okay with
respect to a local root folder. But let's say I open an .html file
by double-clicking it in the Files panel. With that file active if
I choose Preview in Browser I get a "File Not Found" error message
from Firefox.... even though it looks like the path to that file is
correct.
One thing I notice about the path in the address bar of
Firefox is that there are 3 forward-slashes after the file: bit at
the beginning of the line.
For example, the page generating the error has this address:
file:///Macintosh%20HD/Users/peter/Sites/MySite/web_content/index_vertical.html
If you notice carefully there are 3 slashes at the beginning
of the line. If I go to "Manage Sites" I have the settings set to
"links relative to document" and my root folder and images folder
show the proper locations. What have I done?
The error message also says the following in the details
section: Firefox can't find the file at /Macintosh
HD/Users/peter/Sites/MySite/web_content/index_vertical.html.
so there's a forward-slash before the hard drive.... is that
okay?
Thanks for your ideas!
Pedro

CR XI Error message "package package name does not exist"

I am trying to use the Java API that is available for Crystal reports XI. I am using NetBeans v.5.5.1 for developing my Java code.
The application does not seem to find the Crystal reports Java libraries, I cannot compile it successfully. For instance, the statement
import com.crystaldecisions.reports.sdk;
shows an error message "package com.crystaldecisions.reports.sdk does not exist"
I have installed the Java SDK under the web/web-lib directory in my NetBeans project folder, i.e. I copied all the jar files from c:\Program Files\Common Files\Business Objects\3.0\java\lib into the web-lib directory because this is the directory where I have all the other library files that I am using in my NetBeans project.
I am creating instances of the classes ReportAppSession and ReportClientDocument in my java code.
Thanks in advance for any help on this.
Adriana

Hi Adriana
Do you have the jrcerom.jar file in your lib folder.
This is the jar file which includes the package com.crystaldecisions.reports.sdk .
Thanks
Soni

Workflow: Error Message: OL 826: Object does not exist.

Hi,
We are in 4.6C version and I'm using the business object DATESPECS. I have developed a custom object with supertype of the standard.
The error is coming when I test the businees object in transaction SWO1. I need to know how to assembly the object key for raise the event from a customer program with function module SWE_EVENT_CREATE.
I really need some help with this issue... thanks in advance.
Best regards,
Mayra.

Hi,
In your program take a variable say lv_key of type SWO_TYPEID.
Use concatenate statement and concatenate all the fields i.e.Personnel no,
Subtype, Object ID, lock indicator , to, from and record number values in this variable lv_key.
Then you can use this key in FM SWE_EVENT_CREATE.
Hope it helps.
Regards,
Akshay
Note : If FM SAP_WAPI_EVENT_CREATE is available in your system , pls use the same instead of SWE_EVENT_CREATE

Short dump 'Table does not exist in database'

Hello All,
When a report is executing it is going to short dump by saying 'Table does not exist in database'. As per the short dump analysis this issue is happening because of the following   Native SQL statement statement :
Program : %_T050N0 (This is a dynamic program generating by SAP )
Form Name : DYN_LIC_SEL_TOT
exec sql performing LOOP_MOVE_WRITE_ISAP.
select single_plate, itm_num, ctry_code, model_lot,
lic_hold_flg, qty into :dcat-lplate, :dcat-matnr,
:dcat-werks, :dcat-charg, :dcat-holdflag,
:dcat-qty from ZLICENSE_R2 where itm_num   = :p_matnr and
                model_lot = :p_charg
endexec.
As per the customer this issue occurring since they migrated the SAP back-end data base from Oralce to DB6. Here I felt that ZLICENSE_R2 is not migrated from the Oracle to DB6. But as per the BASIS Team, even this table was not maintained in Oracle also. If the table was not maintained in the Oracle, this issue should have been there even before migration also.
Following is the short dump details:
Short text
    Table does not exist in database.
What happened?
    The table or view name used does not
    exist in the database.
    The error occurred in the current database connection "DEFAULT".
What can you do?
    Check the spelling of the table names in your report.
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_NATIVE_SQL_ERROR', was not
     caught in
   procedure "DYN_LIC_SEL_TOT" "(FORM)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
Triggering SQL statement: "select single_plate, itm_num, ctry_code, model_lot,
lic_hold_flg, qty from ZLICENSE_R2 where itm_num = ? and model_lot = ? "
Database error code: "-204"
Could you please let me know what might be the reason for this issue.
Many Thanks in Advance.

Transaction SE11, input ZLICENSE_R2 for table name, and display the table. Did the table display? If not, that is the main problem.
If the table displays, go to menu item Utilities -> Database Object -> Database Utility
In the resulting screen, under the "Status" fields, you should see text "Exists in the database." If you don't, then the table exists in the dictionary, but doesn't exist in the database system. Click the "Create database table" button and then you should be able to run the program.
You may need basis team's help to carryout some of these actions.

Error: "Operation (Message) Mapping ... does not exist" during activation

Hello Colleagues,
I face following problem at our PI 7.1 System.
After import and activating Integration Builder (Directory) Objects I received the Error "Operation (Message) Mapping ... does not exist" but the object (s) exist at Enterprise Service Builder (Integration Repository) at respective Software Component Version.
The individual Product and respective Software Component Version was created at SLD and imported at Enterprise Service Builder (Integration Repository). Afterwards Namespaces with different objects was created incl. the missing Operation Mapping.
As Check:
When I try to import under menu Tools\Apply Model from ES Repository at Integration Builder (Integration Directory) i see onyl SAP (SAP BASIS 7.1) Software Components.
I am not able to find any object regarding the individual created Product\Software Component.
So, i asume objects from the Enterprise Service Builder (Integration Repository) aren't available at Integration Builder (Integration Directory).
SLD cache refresh and application restart already performed.
Any idea?
Many thanks in advance!
Regards,
Jochen

Hi Laxmi,
attached short steps that we performed.
In general in upfront:
This behavior happend after import objects from DEV to TEST for Enterprise Services Builder (IR) and Ingegration Builder (ID) in addition manual object creation at SLD for Technical Systems and Business Systems.
We don't have (currently) a central SLD for each environments DEV, TEST, PROD (not finished setup up to now). For each environments we have a local SLD at PI (XI).
Deployment steps:
- Product and respective Software Component Version created under Software Catalog
- objects creation at SLD for Technical Systems
- objects creation at SLD for Business Systems
- objects imported from DEV to TEST for Enterprise Services Builder (IR) incl. save and activation
- objects imported from DEV to TEST for Integration Builder (ID)
- manual configuration for communication channels performed
- after save and activation i received following error message: "Object Operation Mapping: ... does not exist.
Because of this error message I thing objects out of the Enterprise Services Builder (IR) aren't available at Integration Builder (ID) but i don't know the cause.
Could you help me to understand this behavior?
Many thanks in advance!
Regards,
Jochen

FTXP-error-Domain MWART fixed value does not exist- Message no. F4341

Hi,
I am trying to created a new record for a tax code, and i get this error
Domain MWART fixed value does not exist
Message no. F4341
I looked up OB40, and not sure how to fix this. Do you know how to check the tax codes? How to validate OB40?
Thanks.

Hello,
Please follow this procedure for the input tax codes which experience
the error F4341:
1) Go to SE16 and enter table T007A
2) Hit enter and in the next screen choose the following parameters
   and enter values that represent the tax code for input tax which are
   encountering the problem.
   KALSM (tax procedure)
   MWSKZ (tax code)
3) Click on the "execute" button.
4) Take special attention to column MWART which represents tax type.
   This should only have a value "V" to represent input tax (or "A" if
   output tax).
5) The cause of the error F4 341 is when this column does not contain
   any value or is blank. Which means that there is no defined tax type
   "A" or "V" maintained in customizing.
6) To correct this you should maintain the value again via FTXP for the
   corresponding tax codes and complete all the customizing settings
   relating to tax on sales and purchases thereunder. Afterwhich you
   should no longer experience the error message.
Regards,
REnan

SCCM 2012 R2 reporting error: "The DefaultValue expression for the report parameter 'UserTokenSIDs' contains an error: A specified logon session does not exist. It may already have been terminated. (rsRuntimeErrorInExpression)"

Hi,
I have two SCCM environments under same active directory domain and one service account have been used for SCCM configurations on both the environments (QA and PRODUCTION). I am facing similar error as mentioned above while trying to fetch reports on
PRODUCTION site, but the QA site is working fine, though same service account have been used for configuring both. While looking at the reportserverservice_<date> log on my Production DB server i see the following error
"processing!ReportServer_0-3!2124!01/02/2015-09:09:30:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: , Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during
report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot read the next data row for the dataset DataSet1. ---> System.Data.SqlClient.SqlException: Conversion failed when converting the nvarchar value 'Override
Default' to data type int."
My DB and SCCM primary site are different and the reorting services point is installed on remote DB server. Please help me resolving the issue.
Troubleshooting performed:
1.Disabled the registry key 'EnableRbacReporting' from HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\SRSRP to 0 and then restarted SSRS service and the reporting worked for some minutes after that the registry key reverted back to 1 automatically and
reporting started throwing errors again.
2. Checked with the permissions on DB whether or not 'sysadmin' role is assigned to the SCCM service account.
3. re-registered the SQL management Provider WMI class.
mofcomp.exe “C:\Program Files (x86)\Microsoft SQL Server\110\Shared\sqlmgmproviderxpsp2up.mof”

Hi All,
Finally found exact solution to the reporting error.
Error: while launching SCCM reports (both from Console and web based) an unexpected error occured with error message as "The DefaultValue expression for the report parameter ‘UserTokenSIDs’ contains an error: A specified logon session does not exist.
It may already have been terminated. (rsRuntimeErrorInExpression)"
Solution: This is password replication issue for the domain account used to configure reporting services point in SCCM. If your SQL SSRS reporting services instance and databse runs with local default account whereas the reporting services point on SCCM
primary site is configured with domain account, (As in My case) you need to perform the following in order to get rid of the error.
Launch 'Reporting Services Configuration Manager' from the SQL SSRS box(either Local or Remote), Connect to Report Server Instance->Go to 'Execution Account' tab->Specify the 'Execution Account' as domain account and password which is used to configure
Reporting Services Point in SCCM Primary Site, and then click apply.
Now Lauch the report either way (Web based or from Console), the error will disappear and all your default reports will execute perfectly as before.

MBAM - SCCM 2012 Reports - Error: the 'MBAM Policy' view does not exist

Hi
I have installed MBAM with SCCM 2012 integration. A single server install with SQL server 2012. Mostly it has gone smoothly and laptops are being encrypted and pins stored and recoverable. The problem I have is reports are not showing. I get the following
error message.
"Error: the 'MBAM Policy' view does not exist"
Any ideas why this is? I get the same error message with all 4 reports.

Hi Slycy,
There is another thread that seems to be a similar issue
here that may help you. The last post in particular has a number of steps that you can use to speed up creation of the views:
Just for future reference, there are quite a few things that have to happen before the view is created. This is merely how CM works.
Make MBAM MOF changes
Select TPM spec version in hardware inventory
Install MBAM CM Integration feature
Perform a machine policy refresh cycle on a client to get the MOF changes that need to be inventoried
Perform hardware inventory
Update MBAM Supported Computers collection membership. The machine should appear if it meets the criteria
Run another machine policy refresh on the client so that the Configuration Baseline will come down
Make sure that the MBAM agent has woken up once
Evaluate the Configuration Baseline
The MBAM views should be created now.
You don't have to do this for every machine, but this is the process to speed it up. If you let CM do it, it could take over a week before the view is created the first time, depending on when Hardware inventory runs, etc.
Hope this helps,
David

Error: MDL1819: User Name OWB_OWNER does not exist in repository.

Hi All,
While doing OWB metadata export I got the following error.
Error: MDL1819: User Name < BCP_OWB_OWNER> does not exist in repository.
Actually daily I will take back up for metadata in OWB_OWNER project.
But last 3 days onwards I am getting this error.
Plese help me?
I have nearly 50 mapping in this repository.
Thanks in Advance.

Hi!
I know I'm late with this post, but I'll post it anyway for future reference!
I encountered the same problem and found out that I had a trailing space in my login name, so check for any traling spaces at login to OWB-designer!
(From the error message pasted in your question it seems you have a space in the beginning)
That solved the problem for me.
BR Par

Check Point VPN-1 Securemote service causes Error 1075: The dependency service does not exist or has been marked for deletion

Has anyone ever managed to solve this one?
We have a problem on Windows 7 SP1 32bit systems.
when we try to start the Check Point VPN-1 Securemote service we get this message:
Error 1075: The dependency service does not exist or has been marked for deletion
When we install a clean Windows 7 from an ISO the checkpoint client without any issues
when we use the same Windows Setup source and install it from SCCM TS - the CheckPoint client doesn't start
the client we're installing is : CP_SeucRemoteSecureClient_NGX_R30_HFA3
which is supported for Win7 x86
other than that there are no special prerequisites for the CheckPoint client. therefore we know the problem is local :/
we tried to isolate and minimize the cause of the issues by trying to see the differences between a clean installation from ISO and a clean installation from SCCM
We know for sure the problem is not from SCCM Client, Programs and Features, Updates, Group Policy
it seems like the configuration is the same but we can't seem to find any online solution about this issue
any suggestions?
thanks
Tamir Levy
Tamir Levy

Hi,
Please check if all the dependencies services are running, if not, please start them:
DNS Server
Remote Procedure Call (RPC)
Netlogon
Server
Workstation
Any error message, please post back.
You can also check solution in this article:
http://support.microsoft.com/kb/269375
Hope these could be helpful.
Kate Li
TechNet Community Support

Error 30502: The folder ID does not exist

When I use the Category and Perspective drop down select boxes on
the navigation bar, I receive an error message: "Error 30502: The
folder ID does not exist.
I have checked. I do not have any invalid packages.
Any ideas?

Pls try posting in Portal > Content Area forum.

Invoice created via SUS having error -The template item 1 does not exists

Hi All,
We are in SRM6.0 and in our PRD system, we have few invoices created through SUS showing error "The template item 1 does not exist.
These invoices went into "To be corrected" status and when I hit check it gives me above error message. The message itself don't make much sense to me. Please note we can create new invoice in SRM manually and everything works fine.
Appreciate any pointers.
Thanks, Sachin

We have analysed the issue and found we are getting this error because these invoices are missing with "BE_LOG_SYSTEM" field in table BBP_PDBEI and "BE_REFOBJ_TYPE" field is showing "BUS2201 instead of "BUS2012".
Any feedback why we have these difference as compare to good invoices (created directly in SRM).
Thanks, Sachin

Error: "Message short text 26 107 does not exist"

Similar Messages

Maybe you are looking for