Error message System Overload. (-10011)

Hi,
I just purchased Logic Express 9.
I have a macbook, which matched all the minimum or recommended specifications. E.g. 2GB RAM for large projects. And yet my computer fails to keep up with even playing the demos. It stops at random points and an error message comes up:
System Overload.
The audio engine was not able to process all required data in time.
(-10011)
I have installed the latest update.
I have no other programs running
and I am currently running the demo files off a fast external HD, however I have tried running them off my computer and the demo disc.
Does my computer simply not have the processing power?

Hi,
I have a 2006 Macbook with 2GB's myself.
Your problem is that every Hardware has it's limits when it comes to playing audio. Our little Macbooks haver their limits earlier, a Mac Pro with tons of CPU power & ram will have it later.
To avoid hitting this "CPU ceiling", you can do several things:
1st: Set the audio buffer to a higher value. Though i run my Macbook at 64 or 128, you should try 256 or higher to start with. Set this in Logic's preferences->audio
2nd: Depending on the number and load of the plugins in your channelstrips, CPU load will increase dramatically. Using less plugins or less CPU hungry plugins will certainly help.
3rd: If you have a software instrument track selected during playback, Logic reserves huge amount of CPU power for realtime processing for this single track, leaving all the other tracks with less CPU potential. So, if you just want to play back a project, select an (empty) audio track or the master track instead. This will free up lots of cpu power.
4th: If you have tracks that have been finished for so long, freeze them. This will take the load away from the cpu and put a rmixdown of this single track to your harddisk. However, if your HDD is very full and/or slow and busy with other tasks, you might get the same error, but usually, it helps a lot.
Fox
Fox

Similar Messages

MR11 error message system status CLSD is active

MR11 fails with error message system status CLSD is active . How to clear the PO line item which gives error message in MR11 system status CLSD is active .

If you are using an account assigned PO then possibly the order(PM order, internal order etc) to which your PO refers might have status as CLSD.
Check and reverse the status.

Product Instance Registration Error Message: "System Failure: Error while retrieving xml file from database"

Hi Planning installation Gurus,
Did u get any luck to resolve this problem as i am also facing same problem "Error creating instance" during install of Planning 9.3.1. i tried 30-50 times reconfiguration every time same problem..
OS: Vista Premium
SQL Server 2005
Essbase:9.3.1
Error Message: "System Failure: Error while retrieving xml file from database"
Details of error:::::::::::::::::::::::::
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
java.lang.NullPointerException
at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
wn Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
java.lang.NullPointerException
at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
wn Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
Pls provide Solution

Hi John,
though i am trying with SQl server authentication with different user but still status is same of planningSystemDB.properties
SYSTEM_DB_DRIVER=hyperion.jdbc.sqlserver.SQLServerDriver
SYSTEM_DB_URL=jdbc:hyperion:sqlserver://neeraj-PC:1433
SYSTEM_DB_USER=windowsAuthentication
SYSTEM_DB_PASSWORD=CAFBAEFNBGEAABHEDOADFKADACBGBIFHBLCDFBAFFH
SYSTEM_DB_CATALOG=plandb
SYSTEM_DB_TYPE=SQL
INSTANCE=
my steps:
Using SQL Server Management Studio
Changed Widows authentication to SQL server authentication mode
In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties.
On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
In the SQL Server Management Studio dialog box, click OK to acknowledge the requirement to restart SQL Server.
In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties.
On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
In the SQL Server Management Studio dialog box, click OK to acknowledge the requirement to restart SQL Server.
To restart SQL Server from SQL Server Management Studio
To enable the sa login by using Management Studio
In Object Explorer, expand Security, expand Logins, right-click sa, and then click Properties.
On the General page, you might have to create and confirm a password for the sa login.
On the Status page, in the Login section, click Enabled, and then click OK.
In Object Explorer, expand Security, expand Logins, right-click sa, and then click Properties.
On the General page, you might have to create and confirm a password for the sa login.
On the Status page, in the Login section, click Enabled, and then click OK.}}}
anything else should i change.................

Workflow Error Message: System Account - The Workflow could not set Content Approval Status

This is the first time I try an approval workflow. I am using a template in MS Word and assigned an approval workflow to it. The approval workflow is only going to one person in this case.
When I start the work flow the following 3 error messages show up:
Workflow Error Message: System Account - The Workflow could not set Content Approval Status. Enable content moderation for this list and run the workflow again.
Workflow Error Message: System Account - The e-mail message cannot be sent. Make sure the e-mail has a valid recipient.
Workflow Error Message: System Account - The e-mail message cannot be sent. Make sure the outgoing e-mail settings for the server are configured correctly.
Thank you for your kind guidance.

Hi,
For the first error: Did you set Content Approval in the workflow? If so, see if you have it in the versioning settings of the list settings.
For the second error: double check your recipient is set up as being valid. Did you type in the email address or is it referring to a people picker field? also, make sure that in the workflow for the email that you actually populated it in the
To: field.
for the third error: I suspect that either your farm is not configured for email. Or, this error is a knock on from the second error. If you get the second error rectified it may clear this error. If not then double check the email settings
for your farm.
Johnathan Lightfoot

Help with this error message: System extenstion cannot be used:The system extension "/System/Library/Extensions/AppleACPIPlatform.kext" was installed improperly and cannot be used. Please try reinstalling it, or contact the product's vendor for an update.

I have this error message:
System extension cannot be used
The system extension “/System/Library/Extensions/AppleACPIPlatform.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update.
Please help. Is there a update or how do I reinstall?
Thanks,
John

I submitted the above question, later finding that it has been answered by Buller already. No one need reply as Buller's answer seems to solve the problem for others, and I'll try that.
Jim

System overload (-10011) error????

Okay, so I know VERY little about Logic. Last night I had my guitar plugged into the mic-in and was trying to record some stuff through guitar rig r whatever the plug-in is called. I kept getting some latency issues, so I played with the buffer sizes with mixed results. At any rate, my MBP is only 2 months old! I am definitely under the impression I shouldn't be getting these errors. Here are my basic specs:
Intel Core 2 Duo
2.2 GHz
Memory: 2 GB
HD 120GB
GeForce 8600M GT 128 MB
Resolution: 1440 x 900
Newest OS and current Logic updates
Any ideas/suggestions?

No it's a users forum...
But there are many things to consider regarding Latency and System Overload errors.
This doc may help...
http://docs.info.apple.com/article.html?artnum=304970
Also although an old post I noticed a couple of things in the OP's post. There is a distinction between mic, line and instrument level and the type of guitar one has.
The notebook employs a 'line' level input.
It's hard to ascertain without specific's, but a passive pick up equipped guitar ( your typical electric guitar) into a line-in is not ideal. Not only a level mismatch but an impedance mismatch also. Although active pick ups will have better luck and I don't know if Apple still employs combi converters with a small pre. Regardless, less then ideal.
AFAIK and in my experience, a FW interface with good drivers will have less latency then going directly through a Mac's line level input and converters.
And another thing in notebooks, a typical 5400 rpm internal HD can and usually will have a hard time keeping up with audio and video. And Guitar Rig itself places a load on the CPU also.
Now it's also possible something else is going on. But I would look at optimizing and considering the info in the link first before assuming Apple has fallen down.

System Overload (-10011) [URGENT]

This is something new that just started happening. I'm pretty sure I didn't change any core settings in Logic. But I now get overload errors with unsettling regularity.
Today's occurrence has taken it to the level in which I needed to post asking for help.
In Logic I only have three Midi tracks. 1 - Ultrabeat, 1 - CS80V, 1 - Jupiter8V [registered].
And two AUX sends enabled. 1 - Reverb, 1 - Tremolo. Thats it!
I hit play to get Ultrabeat and Jupiter8 playing, while trying to record the CS80. As soon as I hit 1 note I get the following error message....
Logic Pro:
System Overload.
The audio engine was not able to process *** required data in time.
(-10011)
I find this odd as I used to have WAY more going in a session than just three VSTIs.
Does ANYONE know what may be happening? This has basically blocked any production,
and I cant seem to sort out what is going on. Perhaps a setting I'm overlooking?
Thanks in advance

traddcliff wrote:
So I increased the buffer setting to 256 samples.
Seems to work, thanks!
I didn't think of changing that as it seems high, but its working.
Honestly I don't remember if that was the default setting or not.
But I'll keep going with this.
Ok, just to let you know what the trade-offs are. (you may know this, but it might help others)
The I/O buffer is just what the name implies, an Input/Output buffer. The larger the buffer the more time you're giving Logic to perform calculations for VI, Effects and Live input... plus, keep everything in sync. The smaller the buffer, the less time Logic has to work.
The trade-off is such that the buffer acts like an offset from real time.
For DAW users the two areas where this effect is most noticeable, both are a type of live input. 1. Playing a Virtual Instruments by MIDI. 2. Monitoring a live input through Logic's audio engine. (software monitoring).
To get an idea of of how this works, use a software instrument set to a patch or sample that has a sharp attack, a rimshot or snare, even a trumpet or staccato violins. Go to preferences/audio and set the "I/O Buffer Size" to 1024 and play the software instrument, the delay is due to the large sample buffer.
Your task is to find a balance that works for you, it can change from song to song depending on what vi and effects you have running.
On your project with the overloads, what reverb are you using?
pancenter-
p.s. The I/O buffer settings do not affect recording and playback sync, Logic makes internal adjustments for buffer size and delays all tracks accordingly.

Unable to copy mp3 file to slideshow in Photoshop Elements 6. Get error message system does not have required compresser/ decompresser codec installed. How do I fix this?

I run windows 7 on my PC and keep getting above error message when I try to copy an mp3 file to the slideshow I'm creating!
How do I fix this?

I tried to update and it keeps telling me to get the Application Manager. And this is what happens
Adobe Application Manager failed and it told me to download the Adobe Support Advisor.
Adobe Support Advisor told me that there was an issue:" cpsid_82829s1: "A restart is pending," bootstrapper error has occurred. "Token Number: 40-87772-063201122012
I followed the instructions it gave me to correct this issue:
If you receive the error "Installer has detected that a machine restart is pending. It is recommended that you quit the installer, restart try again," do the following:
#Restart the computer and try the installation again.
#If the installation fails, delete the InProgress registry key:
Disclaimer: This procedure involves editing the Windows registry. Adobe doesn't provide support for editing the registry, which contains critical system and application information. Make sure to back up the registry before editing it. For more information about the registry, see Windows registry information for advanced users on the Microsoft support site, or contact Microsoft.
Launch Windows Registry Editor.
(Windows XP) Choose Start > Run, type regedit in the Open text box and click OK.
(Windows Vista/ Windows 7) Choose Start, type regedit in the Search box, and press Enter.
Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager.
Delete the InProgress key.
I was not able to find the "InProgress" key.

After software updates - error message- system extensions are not valid

Every time now after installing SL, when apple update installs new software, an error message comes up - system extensions not valid, reinstall or ask the system administrator. it then goes through each extension that is wrong. it appears a lot of them are from oct 2007. What do I do about this?

here are the extensions: most of them that sya are installed incorrectly
AppleK2SATARoot.kext
AppleMPIC.kext
ATIRadeon8500GA.plugin
ATIRadeon9700GA.plugin
ATIRadeonGA.plugin
ATIRadeonGLDriver.bundle
ATIRadeon8500GLDriver.bundle
ATIRadeon9700GLDriver.bundle
GeForce2MXGLDriver.bundle
GeForce3GLDriver.bundle
GeForceFXGLDriver.bundle
ATIRadeonDVDDriver.bundle
AppleAltiVecDVDDriver.bundle
ATIRadeon8500DVDDriver.bundle
ATIRadeon9700DVDDriver.bundle
ATIRadeon8500VADriver.bundle
ATIRadeon9700VADriver.bundle
ATIRadeon.kext
ATIRadeon8500.kext
ATIRadeon9700.kext
NVDANV10Hal.kext
NVDANV20Hal.kext
NVDANV30Hal.kext
AppleNDRV
ATINDRV.kext
ATIRNDRV.kext
AudioDeviceTreeUpdater.kext
AppleDallasDriver.kext
IOI2CFamily.kext
IOI2CControllerPMU.kext
IOI2CControllerSMU.kext
IOI2CControllerPPC.kext
zfs.readonly.kext
IOPCCardFamily.kext
IOPlatformFunction.kext
AppleMacRISC2PE.kext
IOI2CPulsar.kext
IOI2CCPUVoltage.kext
IOI2CHWClock.kext
IOI2CSlewClock.kext
AppleHWClock.kext
AppleMaxim6690.kext
AppleMaxim1989.kext
AppleLM7x.kext
AppleLM8x.kext
AppleSMUMonitor.kext
IOI2CMaxim1989.kext
IOI2CMaxim6690.kext
IOI2CAD741x.kext
IOI2CLM6x.kext
IOI2CLM7x.kext
IOI2CLM8x.kext
IOI2CSMUSat.kext
IOI2CMaxim1631.kext
AppleI2S.kext
AppleMacRiscPCI.kext
IOI2CDeviceLMU.kext
AppleLMUController.kext
AppleMacRISC4PE.kext
AppleMediaBay.kext
seatbelt.kext
AppleSym8xx.kext
AppleThermal.kext
AppleCore99NVRAM.kext
AppleVSP.kext
ApplePCCard16ATA.kext
KeyLargoATA.kext
IOADBFamily.kext
ApplePCCardATA.kext
AppleLED.kext
AppleK2SATA.kext
AppleKiwiRoot.kext
AppleKiwiATA.kext
AppleI2SModemFamily.kext
AppleFlashNVRAM.kext
AppleVIA.kext
AppleFPButton.kext
PMUMotionSensor.kext
IOI2CMotionSensor.kext
IOI2CDeviceFCU.kext
AppleFCU.kext
AppleI2C.kext
AppleKauaiATA.kext
AppleKeyLargo.kext
AppleK2.kext
AppleK2Driver.kext
IOKeyLargo.kext
AppleSPU.kext
ApplePMU.kext
CMD646Root.kext
AppleSMU.kext
MacIOGPIO.kext
I2CGPIO.kext
IOI2CDriveBayGPIO.kext
AppleGPIO.kext
AppleK2Fan.kext
IOI2CADT746x.kext
AppleFan.kext
VirtualAudioDriver.kext
AppleLM87.kext

Startup Error Message: System Extension Cannot Be Used

Every time I turn on my computer, this error message appears. I have searched my Library > Extension folders and I cannot find the AppleUSBEthernetHost. I have also searched for the Apple USBEthernet Host, and cannot find this. As far as I know, nothing is working improperly, save for my Sims 3, but I doubt that has any connection. I am running on a MacBook OS X 10.6.8, Build 10K549. Attached is a screen-capture of my error message. Any help would be greatly appreciated.

Open the Script Editor in the /Applications/AppleScript/ folder, copy and paste the entire following line into it, and press the Run button:
do shell script "chown -R root:wheel /System/Library/Extensions/AppleUSBEthernetHost.kext" with administrator privileges
If it doesn’t work, throw that item away and then reinstall iTunes.
(113835)

I get the error message:System extension cannot be used The system extension "/System/Library/Extensions/AppleUSBthernetHost.kext" was installed improperly and cannot be used. Please try reinstalling it, or contact the product's vendor for an update.

I get the error message after updating itunes:
System extension cannot be used
The system extension “/System/Library/Extensions/AppleUSBthernetHost.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update.
What or how do I fix this?

"I get the error message after updating itunes:
System extension cannot be used
The system extension “/System/Library/Extensions/AppleUSBthernetHost.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update.
What or how do I fix this?"
I have a MacBook Pro running Mas OS X Version 10.7.5
Is this a problem I need to fix? Is there a fix or update?

Error message: /System/Library/Extensions/CDSDAudioCaptureSupport.kext

All of a sudden I keep getting this error message:
The system extension "/System/Library/Extensions/CDSDAudioCaptureSupport.kext" was installed improperly and cannot be used. Please try reinstalling it, or contact the product's vendor for an update.

Try this:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger, and 4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

Error Message: System UIDs Inconsistent

I got this message after I turned on the phone: "UIDs on the system are inconsistent, you need to wipe your data partition or your device will be unstable." Can someone put this in plain English for me and tell me what exactly it is telling me and how do I do what it's asking?
Can this problem be related to why I lost my People (contacts) as well as why messages show phone numbers and not names, lost Google Play and apps I downloaded two weeks ago, and all call history?
Thanks in advance!

I can help with the translation, mijab. Your problems are most likely related this error message. The first thing you should do is clear the partition cache. Please follow the steps below:
1. Boot into recovery
• Press and hold Power, Choose "Restart" option
• When screen turns off, press and hold Volume Down and Power
2. When the white HBOOT screen appears, use the volume button to move down to “RECOVERY.”
3. Press the Power button to select “RECOVERY.”
4. When the triangle and exclamation appears, hold the Volume Up and Power button at the same time.
5. Using the volume button, scroll down to “Wipe cache partition” and select it.
6. Select "Reboot system now"
If this does not resolve your issue the master reset would be the next best step. Keep me posted.
ChaunceyM_VZW
Follow us on twitter @VZWSupport

HT1338 Error message: system/library/extensions/symDC.kext was installed improperly

Each time I update a new version of OS X an error message appears saying "The system extesion system/library/extensions/symDC.kext was installed improperly and cannot be used. Please try reinstalling it, or contact the product's vendor for an update."
Please provide help in order to fix it.

X423424X wrote:
No such thing as Library/Extensions.
Wrong.
X423424X wrote:
All kexts must reside in /System/Library/Extensions.
Right.

Got error message - //System/Library/Extensions/AppleUSBEthernetHost.kext" was installed improperly and cannot be used.

Was updating at the App Store - Safari, iTunes, iWorks 09 and prior to that had updated something at Adobe's website. Then this error message popped up:
“//System/Library/Extensions/AppleUSBEthernetHost.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update.
(I just received a refurbished computer with a new hard drive from a local Apple repair store...
Is this an easy fix. Thanks, Charlotte

What I ended up doing is a reinstall the OS.
There was an important component I forgot to mention...my hard drive had crashed and I had it replaced. When it was replaced - the old drive was copied to the new. Since the prior error messages I had gotten from MemTest and CheckMate kept saying Bad Blocks in the drive - it was suggested that the corrupt or missing data on these "bad blocks" had not copied or copied incorrectly.
So only time will tell if this fixed this error. (Don't have external hard drive so never had Time Machine set up to begin with.) Original computer was refurbished and believe some things weren't done right from the get go. Oh well... Hope I didn't lead anyone astray.

Error message System Overload. (-10011)

Similar Messages

Maybe you are looking for