Error message trying to reproduce the demo songs on the pack. A message appears: The disk is too slow o there is an overloaded. My system is in Spanish so maybe the message is not exactly like this in English but I am sure you will get the idea. Thanks!

When I try to reproduce the demo songs that comes with the Logic Studio pack a message pop out : The disk is too slow or there is an overload.
Any help, please?

spheric, thanks a lot!!!
You are right, as soon I copied the songs to the HD all of them works perfect!
Thanks a lot!!!

Similar Messages

Using wall charger for first time I get error message "charging not supported by this accessory." Been using since December and not seen this before.

Using wall charger and am now getting error message "charging not supported by this accessory." Have been using since December and this is first time I have encountered this.

Did you look to see if there is debris or dust causing the problem? Get a flashlight and take a look to make sure.
Is there something in the USB end of the cord perhaps?
You didn't answer this question ....Are you using the charger and cord that came with your iPad?
You could try changing cords if you have another one available to see if it is the cord. Have you tried connecting to your computer to see if you get the same message?
You could try a hard reset by holding down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears, let go of the buttons and let the iPad restart. Then try the charger again.

LR 5 two installation. Dektop and Notebook. Notebook changed. LR 5 license deleted. New Notebook, new installation LR 5. Error Message, Key not valid at this status.

LR 5 two installation. Dektop and Notebook. Notebook changed. LR 5 license deleted. New Notebook, new installation LR 5. Error Message, Key not valid at this status. How can I do for the new installation.

Am 15.08.2014 14:03, schrieb dj_paige:
>
      LR 5 two installation. Dektop and Notebook. Notebook changed. LR
      5 license deleted. New Notebook, new installation LR 5. Error
      Message, Key not valid at this status.
created by dj_paige <https://forums.adobe.com/people/dj_paige> in
/Photoshop Lightroom/ - View the full discussion
<https://forums.adobe.com/message/6642924#6642924>

On my 3gs keep getting error message charging not supported with this accessory even when its not plugged in and i have done a restore anyone know how to fix

on my 3gs keep getting error message charging not supported with this accessory even when its not plugged in and i have done a restore anyone know how to fix

Clean the iPhone charging port with a clean dry toothbrush.

TS3297 I have rented a movie on iTunes and it won't download. I don't get an error message. It looks like it is downloading but doesn't progress

I have rented a movie on iTunes and it won't download. I don't get an error message. It looks like it is downloading but doesn't progress

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.

Itunes won't open after downloading last update. Error message says "not supported by this type of Mac"

Downloaded latest iTunes update. Now iTunes won't open, and the error message says "You can't open the application iTunes because it is not supported on this type of Mac." I have been using this MAc since 2008. Any suggestions appreciated.

Welcome to Apple Support Communities
It's a common problem that some users have after installing the most recent iTunes. Download and install again iTunes 11.0.3 to solve that problem > http://support.apple.com/kb/DL1614

Get Error message "Key not valid in this status" using Win 8 Pro.

Hello Community,
While I try to install the program i get the error message in the title.
I downloaded it with t-online Homepage-plan.
On both: Premiere Elements and Photoshop Elements 12.
I using a 64bit based PC.
Already tried:
Running in XP-Mode
Start as Administrator
Change installation destination
Thanks for your help, when you need further information just ask.
Greatings
Kelvin

For "Key not valid for use in specified state" errors try moving the folder RSA from
C:\Users\<User>\AppData\Roaming\Microsoft\Crypto\RSA to say C:\RSA (just in case there should be a need to restore it) then try installing again. This folder appears to act as a cache and should be rebuilt automatically as required.
tt2

MacOS10.5.8 error message Firefox not supported on this architecture????

Quit Firefox with 4 open web pages and then tried to open it about 20 minutes later. Error message "You cannot open the application Firefox.app because it is not supported on this architecture.

Firefox 4 and later versions aren't compatible with PPC, they are Intel only.<br />
http://www.mozilla.com/en-US/firefox/4.0/system-requirements/
For older Macs that aren't supported in Firefox 4.0 & 5.0, try TenFourFox for PowerPC's running Mac 10.4.11 & 10.5.8 . <br />
http://www.floodgap.com/software/tenfourfox/ <br />
http://code.google.com/p/tenfourfox/
Or stick with Firefox 3.6. <br />
http://www.mozilla.com/en-US/firefox/all-older.html

Error message "Solution not assigned to this user"

After creating the data source, I'm trying to create a report in SDK sandbox solution.
As I'm not a keyuser, it is going to the ByD center and asking for user id / password.
I even tried to assign WoC View also to a user.
When I tried with different user ids given to me by SAP, I'm getting the same error.
Let me know the steps to assign a solution in ByD center for report creation from ByD SDK
- Ravi ,

Hi Ravi,
as I already told Lynn, this will only be possible in a global solution.
The reason is the following:
You can create yourself multiple sandbox solution. So if you now to multiple changes with key user tools in the frontend for different sandbox solutions, in the end you won't know which change was made for which sandbox solution as these changes won't appear in your list of solution entitities in the ByDesign studio.
Therefore: Changes with the key user tools can only be made for the global solution.

3G. I keep getting an error message "Network not available".

3G. I keep getting an error message "Network not available". This is after turning data roaming ON, and even after turning phone off then back on, and having a 3G signal. Help!

I did ask my carrier - twice. I also went into the Apple Store (45 miiles away), who checked it and assured me no hardware issues.
I went back to the phone carrier - for the 3rd time. The assistant rolled her eyes and said this happens all the time. She changed the cellular data network settings on my phone from ideate to mobile. Problem solved!
Carrier has also now offered a refund for the time without coverage - but I had to ask about that, and resist their attempts to change me to a more expensive contract.
Hope this helps anyone else. Thanks razmmee209

When I attempt to purchase a song from itunes, I keep getting the following error message: Could not purchase "song name". An unknown error occurred (-42408). There was an error in the itunes store. Please try again later

When I attempt to purchase a song from itunes, I keep getting the following error message: Could not purchase "song name". An unknown error occurred (-42408). There was an error in the itunes store. Please try again later
Can anyone help solve this problem?

I've done a search on here and haven't found any solutions posted for it for windows computers. You could try posting in the iTunes For Windows forum and see if you get any suggestions in there (are you able to download other items from the store e.g. a free app ?) - I use a Mac, the only things that I could think of to suggest trying is see if you get the same error on a different iTunes library :
creating and/or opening a different iTunes library : http://support.apple.com/kb/HT1589
or using a different user account on your computer in case it's a problem with that user account.
But you may want to try the iTunes For Windows forum first, apart from anything else you are likely to get better help for the above

Error Message is not displayed on the pop screen for chain end chain

Hi,
I have called a screen in one of the standard program using enhancmenets,
and i had put validations using chain and end chain, but the error message is not displayed immediately on the screen
but it is displaying as log , i want the error should come on the same screen and it should not allow till the correct values are entered , how to handle it
regards
afzal

Hi,
have you tried option "LIKE" with instruction MESSAGE.
Example:MESSAGE ID '38' TYPE 'S' NUMBER 000 DISPLAY LIKE 'E' WITH 'My Message'.
And instead of using a MESSAGE instruction, why to not use a popup ?
Like using one of these function modules (for instance):
TMS_BCU_POPUP_TO_CONFIRM
POPUP_TO_CONFIRM_STEP
POPUP_TO_DECIDE
FC_POPUP_ERR_WARN_MESSAGE
etc...
If that does not work, perhaps it's your ehancement which is not the good one or perhaps you have use a second one.
Regards
Mickael

I have a targus 4.0 bluetooth usb adapter and so i can pair my iphone 4s and ipad air wirelessly, it seems to pair ok but when i try to connect i get a error message or not compatible. can some one tell me if it i can use this

i have a targus 4.0 bluetooth usb adapter and so i can pair my iphone 4s and ipad air wirelessly, it seems to pair ok but when i try to connect i get a error message or not compatible. can some one tell me if it i can use this bluetooth with my devices, thanks

sos1der wrote:
pairing the apple equipment is not a big deal just wanted to add songs from itunes wirelessly.
You can only add songs to your iOS device from iTunes via Wi-Fi sync or via your cable, not Bluetooth.
sos1der wrote:
but i tried paring my LG bluetooth so i can listen to music on my computer wirelessly buy it gives me the same error message
That's an entirely different issue, unrelated to your iOS devices.

Error when trying to access the RBAC User editor and Message tracking

Hi,
I am getting an error when trying to access the RBAC User editor and Message tracking on the Web Mgmt interface. I verified that the admin account trying to access is in the Organization Management group and has the correct Role Assignment Policy applied.
I searched through this thread below and saw that matching the msExchRoleLink and msExchUserLink attributes fixed the issue.
https://social.technet.microsoft.com/Forums/exchange/en-US/fc568cc6-8691-4127-b70b-bcc82f9b1f7f/first-2010-cas-server-no-administrator-rights-emc-permissions-gone?forum=exchange2010
However I have another environment where this is not the case and works just fine; the msExchUserLink attribute has a value of CN=Organization Management,OU=Microsoft Exchange Security Groups,DC=Domain,DC=Local which is different as per the issue outlined in
the above thread so I am not convinced that this will work and also don’t want to blindly edit something in adsiedit without being sure.
I then checked the event logs on the server and saw the below error logged;
Current user: 'Domain/Server Services Accounts/administrator'
Request for URL 'https://server.domain.com/ecp/default.aspx?p=AdminDeliveryReports&exsvurl=1' failed with the following error:
System.Web.HttpUnhandledException: Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.Exchange.Management.ControlPanel.UrlNotFoundOrNoAccessException: The page may not be available or you might not have permission to open the
page. Please contact your administrator for the required credentials. For new credentials to take effect, you have to close this window and log on again.
at Microsoft.Exchange.Management.ControlPanel._Default.CreateNavTree()
at Microsoft.Exchange.Management.ControlPanel._Default.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
--- End of inner exception stack trace ---
at System.Web.UI.Page.HandleError(Exception e)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at ASP.default_aspx.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Microsoft.Exchange.Management.ControlPanel.UrlNotFoundOrNoAccessException: The page may not be available or you might not have permission to open the page. Please contact your administrator for the required credentials. For new credentials to take effect, you
have to close this window and log on again.
at Microsoft.Exchange.Management.ControlPanel._Default.CreateNavTree()
at Microsoft.Exchange.Management.ControlPanel._Default.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
I then had a look at the IIS permissions for ecp and owa. The account did not have permissions so I added them there but still got the same error. I’ve also tried all of the above with a newly-created account but still got the same issue.
Any ideas as to what the above event log is specifically referring to?

Hi,
From your description, I would like to clarify the following thing:
If you want to search message tracking logs, the account you use should be a member of the role groups below:
Organization Management role group, Records Management role group, Recipient Management role group.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

HT201328 after unlocking from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this . Any ideas?? TKS Sandro

after unlocking over the phone from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this .
Itunes displays a message saying "there is no SIM installed in the phone you're trying to activate" even if there is the same SIM that was working minutes before.
The SIM works on a different phone I tested it.
Any ideas?? TKS Sandro

“Could Not Activate EDGE” error message Update ...
Well it’s going on day 6 and still sporadic to no EDGE on my iPhone. At one time, it was thought to be a defective iPhone – since my partner’s iPhone works just fine.
After over three hours on the land line with AT&T and Apple, I was sent to the local Apple store for a replacement. Of course, as soon as I walked into the Apple store my iPhone worked just fine. ;-( The local store replaced my iPhone and suggested I go home and activate the phone as a NEW iPhone, that way if there was a bug in my data it would not carry over to the new phone. Did that and well… still sporadic to no EDGE. By the way, I have the Big White “E” to the right of the 5 bars and AT&T .
AT&T said last week they has “Software” issues in my area, but the CSR I talked to did not know what the issues were or if they were the cause of my problems. He did say they would call me back today to see how my iPhone was doing, but alas, no call back.
When I’m next to my partner, trying to access the same feature, his iPhone is just so fast. Mine hangs up, draws out and finally I get the error message, “Could Not Activate EDGE”. I am updated to version “1.1.4(4A102)”. New (refurbished) iPhone direct from Apple.
I remember reading a while back about some problems others had when they upgraded to from 1.1.3 to 1.1.4. I never had those problems, but it sure looks like they may have started. Does anyone remember what the problems with 1.1.4 were, what was done if anything to correct them, and best of all any suggestions?
By the way, this is Seattle, not some small – out of the way place where connection and signal strength is expected to be second rate. Also, I had full function of my iPhone from the day I bought it in June 2007, all the way up to Thursday March 20, at 2120.
Thanks
Joe

Error message trying to reproduce the demo songs on the pack. A message appears: The disk is too slow o there is an overloaded. My system is in Spanish so maybe the message is not exactly like this in English but I am sure you will get the idea. Thanks!

Similar Messages

Maybe you are looking for