Error - Message: update61.map(0)_FILE_NOT_FOUND while mapping update61

Hello!
I tried to install the new patch (update) for my installed Designer 6i.
But the installation failed. I allway got that following ERROR-Message:
"Error - Message: update61.map(0)_FILE_NOT_FOUND while mapping update61"
Whats wrong? What should I do?
Thank you
Uwe

once i faced similiar problem i was installing typical installation then i used custom and installed only the necessary components i needed then it worked ok .

Similar Messages

Error message at the selection screen while processing screen logic

Hi All,
I need to show error message at the selection screen.
I am calling the screen inside the START-OF-SELECTION, and processing the calculation and putting the data into i_final internal table. If internal table I_FINAL is empty I have to show error message saying ' DATA is empty' , this error message should be shown at the SELECTION SCREEN (Report input screen 1000) and provide the user to enter the input values once again.
But whenever I am populating error message, I am getting a pop up to chose exit, and process is terminating.
Since I am in the middle of the screen processing whenever I am giving a error message.
Please let me know how can I populate error message without terminating the process while I was in the middle of the screen processing logic.
Regards,
Mahesh

hi
If u are trying to validate a field use
AT SELECTION_SCREEN ON <field>
if want to validate a block
AT SELECTION SCREEN ON <block>
If Universal Validation
AT SELECTION SCREEN
and display a 'E' Message inside the block.
You can Enter Correct Value and start processing Forward.
hope this will help.
Regards
Sumit Agarwal

Error Message External Mapping Not Complete Yet

Hi,
I have the following scenario.
Component A is Embedding Component B.
Component B has a Componenet Controller that makes a Service Call to a Function Module.
The Top Node in the Context of Component Controller of Component B (which is same as the name of the function module being called) is marked with :
Interface Node = 'X'
isInputElement = 'X'.
The IMPORTING Node gets the isInputElement = 'X' property.b The CHANGING node does not.
The Context of COmponent Controller of B looks like
 Context
 Name_of_Function_Module
 IMPORTING
 Attribute1
 CHANGING
 Attribute2
Now in Component A, in the Component Usage of B-> Interface Controller , I declare the Usage of Component Controller of Component A
I did the external mapping of the Top Node of Component B(throught the interface controller) to that of Component Controller of A.
I created a View in Component A, declared usage of Component Controller of A in this View, did context mapping from View Controller of A to Component Controller of A and binded the IMPORTING node attributes to the Inputfield.
I made sure I instantiate the Used COmponent B in the WDDOINIT() method of the COmponent Controller of A
WHen I run the application I get the error
External Mapping for COMPONENT A # Name_of_Function_Module.IMPORTING.Attribute1 Not Complete Yet
What am I missing here?
Thanks
Message was edited by:
 SAP User

Thanks Regina,
In my case, I have to have the IMPORTING Node and NAME_OF_FUNC_MODULE node as isInputElement = 'X' because the values for the Importing parameters comes from the outer component .
The CHANGING Node does not have isInputElement = 'X' because the data flow is from the Imterface Controller of Component B to the Component Controller of Component A.
The problem was that I had wrongly marked the Node for Component Controller of Component A, which is mapped to the View COntroller of A, as isInputElement = 'X'. I removed that and it worked fine..
In a nut shell, the followiing holds true for External Mapping
1) The SOURCE of data is ALWAYS from outer Component to Inner Component, that is for Eg: from the COmponent Controller of Component A to the Interface Controller of COmponent B, if A Embeds B
2) The Controller Usage of Component A has to be declarred withing that of the Interface Controller of B (and not the other way..THIS IS IMPORTANT, since the source of data is the Component Controller of A, so B has to Use A and not Vice-Versa)
3) The Source of data for Nodes with isInputElement = 'X' is always the COmponent Controller (or Custom COntroller) of the OUTER Component, while that with isInputElement NOT EQUAL 'X' is the Interface Controller of the INNER Component
Regina, Pls input ur comments

Custom error message in mapping-Alert

We are using XSLT mapping and We are raising custom error message based upon some conditions i.e if vendor number is invalid or blank.If it doesn't meet the requirement,mapping will fail and it will throw error message as" IDoc XXXXXXXXX is having invalid vendor number".
My question is,we would like to send this custom error message to email receipients through RWB-AFW.
How do we capture this custom error message is alert category or alert rule?

SOLVED!!!!
UDF call to RFC-FM by passing payload dato in t it

How to XI error message will mapped to the SOAP faul message-SOAP(Axis)

Hi,
Receiver end I am using SOAP (Axis) adapter and I am getting the system error and I am not getting the payload in SXMB_MONI.
What ever the error message how do MAP as a SOAP Fault message in SXMB_MONI.
I found the Solution from OSS note 1039369 but did not explain where to set what parameter and what modules...
SOAP Fault code
If parameter Category is XIAdaptger, Area SOAP, Code FAULT
In this case, parameters P1 and P2 may be set to the fault namespace and fault name. If these parameters are set, the SOAP fault code is set to namespace P1 and name P2. Otherwise, it is set as in other cases.
For all other cases
In this case, the SOAP fault code is set to namespace "http://sap.com/xi/XI/Message/30" and name category.area.code, where category, area, code represent the XI error category, area, and code values, respectively.
SOAP detail
If parameter ApplicationFault is set
The SOAP detail child is set to the XI application payload. If, however, the payload extraction mode is set to Envelope, the application payload is taken as the SOAP envelope and the SOAP detail content is set to its body content. Similarly, if the extraction mode is set to Body, the application payload is taken as the SOAP body and the SOAP detail content is set to its content.
Otherwise
No SOAP detail content is set in this case.
Examples
XI error element
<sap:Error ...>
<sap:Category>XIAdapterFramework</sap:Category>
<sap:Code area="MESSAGE">GENERAL</sap:Code>
<sap:AdditionalText>Failed to determine a receiver agreement for the given message.</sap:AdditionalText>
</sap:Error>
SOAP fault element
<soapenv:Fault>
<faultcode xmlns:ns1="http://sap.com/xi/XI/Message/30">ns1:XIAdapterFramework.MESSAGE.GENERAL</faultcode>
<faultstring>Failed to determine a receiver agreement for the given message.</faultstring>
<detail/>
</soapenv:Fault>
Help appriciated
Regards,
Venu.
Edited by: Venugopalarao Immadisetty on Sep 24, 2009 3:39 PM

Using Receiver SOAP Axis adapter and I am getting the below exception
XI error element
<sap:Error ...>
<sap:Category>XIAdapterFramework</sap:Category>
<sap:Code area="MESSAGE">GENERAL</sap:Code>
<sap:AdditionalText>Failed to determine a receiver agreement for the given message.</sap:AdditionalText>
</sap:Error>
and above exception how do I convert as a SOAP Fault message..
SOAP fault element
<soapenv:Fault>
<faultcode xmlns:ns1="http://sap.com/xi/XI/Message/30">ns1:XIAdapterFramework.MESSAGE.GENERAL</faultcode>
<faultstring>Failed to determine a receiver agreement for the given message.</faultstring>
<detail/>
</soapenv:Fault>
Any idea what modules need to add in Receiver SOAP Axis adapter.

Error Message: Split mapping created no messages

Hi,
I just would like to ask you views on this type of error message.
Could anybody please explain to me as to how this error occurs? What are the factors that causes this error?
Thank you so much.
Grace

check this link, similar problem is discussed....
Re: Split mapping created no messages -Mluti Mapping
it might be your payload of the source is not what it actually exopecting to create the target strucutre...

Error message on Maps?

I just discovered that when I ask for directions on the Maps application since the upgrade, I get an error message that says "Directions could not be received".
All of the other functions on Maps work.
Anyone else getting this?
This is my first post.

Jason helped me too. After a recent sych, my contacts lost the US as the country for various addressed and that messed up google. Once I set the countries, it worked again. Good luck.
http://discussions.apple.com/thread.jspa?threadID=1364515&tstart=0

Getting Error Message "A task was canceled" while deploying solution in SharePoint 2013.

Hi All,
I am Getting below mentioned error message while trying to deploy the solution.
Error occurred in deployment step 'Recycle IIS Application Pool': A task was canceled.
Any help on this?
Thanks!!

Hi,
Would you mind provide more details on what solution you want to deploy to SharePoint?
Can you deploy a simple and clean solution such as visual web part to SharePoint?
Do you have the proper permission to deploy this solution to SharePoint?
In order to deploy a solution to SharePoint from Visual Studio, we need to be a member of farm administrators and the administrator of current machine.
Please ensure you use the farm administrator account and run the Visual Studio as Administrator, then try to deploy clean solution such as visual web part for a test.
Feel free to reply with the test result if the problem still exists.
Best regards
Patrick Liang
TechNet Community Support

Error message BP does not exist while creating service order in WEB UI

Hi Experts,
i have an issue while creating a service order in WEB UI the system is automatically taking the BP ""created By"" but while saving the document Error message showing "BP does not exist"
we have already completed set up integration with HR .created the user as BP Role "employee"
Kindly suggest what are the other configuration that need to be checked.
Regards,
D Panda

Hi,
Have you made the assignment of the user (defaulting in created by) to the employee (under the identification tab in employee)?
Regards,
Parul

PDF Generation Error Message:Couldn't open File while generating PDF from a Frame (7.2 Version) book

Hi,
I'm trying to convert a book into PDF and I get the error message Couldn't open a file (... <filename>.fm) and the unavailable Fonts dialog box also appears. The tricky thing is I've converted the same book into PDF just a couple of days ago. Now when I tried to do it again, I get the above mentioned error message. I tried unselecting the File > Prefrences > General > Remember Missing Fonts checkbox too. However, it didn't help in generating the PDF. I will be thankful if anyone suggests a suitable workaround for this issue. Thanks in advance.

Usually, deselecting Remember missing fonts works.
The missing fonts message displays when you or FrameMaker opens the file. The workaround is to open all the files in the book, or at least those with the "missing" font, clearing the message for each file. Now print the book to PDF, while keeping the files open. This usually works because you have already cleared any missing fonts messages.

Whenever I use a search engine, I keep getting the error message "The connection was reset while the page was loading".

I am able to access the internet, but none of the search engines like Google, Yahoo or Bing will work. the page will not load. I get the error message:
The connection to the server was reset while the page was loading.
* The site could be temporarily unavailable or too busy. Try again in a few moments.
* If you are unable to load any pages, check your computer's network connection.
* If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.

Your plugins list shows two Flash plugins and other outdated plugin(s) with known security and stability risks.
# Shockwave Flash 10.0 r45
# Shockwave Flash 10.1 r53
# Adobe Shockwave for Director Netscape plug-in, version 11.0
# Next Generation Java Plug-in 1.6.0_19 for Mozilla browsers
Flash Player uninstall: http://www.adobe.com/go/tn_14157 (this will remove the Firefox Flash plugin and the ActiveX control for IE)
Update the [[Flash]] and [[Shockwave|Shockwave for Director]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
*http://www.adobe.com/shockwave/welcome/
*http://www.adobe.com/downloads/
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)
Do a malware check with a few malware scan programs. 
You need to use all programs because each detects different malware. 
Make sure that you update each program to get the latest version of the database.
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
*http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]]

Error Message: Can't open Pages while it is updating

Getting an error message when I try to open Pages ~ Pages cannot be opened while it is updating.

force quit iphoto - Apple menu ==> force quit - restart your Mac and go to the App store and start the update again - updates are always free - Upgraded are paid but you only have to pay once to go to the upgraded version - after upgrading updates are free
What version of iPhoto were up updating from And what version were you updating to?
LN

Pages error Message! "Pages Unexpectedly Quit while trying to open...."

My wife just created a beautiful newsletter in Pages. She went to print it off last night and closed the document while it was printing and when she went to reopen it she got the error message. I've tried the suggestions in this fourm (p.list file trash, etc) however, to no avail!
Can someone out there give me some guidance as to my options?? We would love to get the text if nothing else out of this file. I'm sensing it is a corrupting file (Pic/font) I've tried deleting the jpg's and the png file but nothing is working.
thanks for any help,
macbook pro Mac OS X (10.4.9)

Mark,
I've been using Pages for two and a half years, and I've yet to have a corrupt file (knocking on wood, nervously fingering rosary beads, burning incense). You may have a bad font or a corrupt image. One thing's for sure: when you print a Pages document, it writes printing info to the file. It's possible that it was in the process of doing that when your wife closed the document. Do you, by any chance, have a set of handcuffs? A divorce lawyer? Strong sedative?
-Dennis

Error message " [RunQueryToServer] Job Not Found " while editing Schedules

Hi,
We are on BPC 7.5 NW. While trying to Edit Schedules in Datamanager , an error message is received " [RunQueryToServer] Job Not Found ". Could anyone suggest what could be the reason for the issue, is it admin rights of the user involved ?
Please do let me your suggestions.
Best Regards,
SAYAN

Message starting with Z is home made message. That means the message is designed by your organization only. You should consult with your ABAP team to check the root causes of the error message. If you know the debug process , then you can check it also by debugging. To get the details of the error message, go to SE91 and the enter class ZM and message no 303, then use the option 'where used list' to check the details used of the message.

Error Message on Web Premium Suite while opening Acrobat that Adobe Acrobat was installed as part of a Suite

Can not open Acrobat Pro 9 out of my adobe creative suite 4 web premium. Keeps giving an error message. Adobe Acrobat was installed as part of a suite. To enable Adobe Acrobat start another component of this suite. I am running Windows 7 64 and already have the CS6 Premium Production Suite loaded on my computer. I really don't need to load all of the Web Premium since I have upgraded to CS6 programs but still need the Acrobat. My hard drive crashed and I've had to start all over again. This is the only glitch and it's becoming very frustrating.
Can't find a link to actually speak to someone at Adobe.

you'll need to install and open some other 32 bit cs4 app.

Error - Message: update61.map(0)_FILE_NOT_FOUND while mapping update61

Similar Messages

Maybe you are looking for