Error message using print set-up utility" server-error-service-unavailable"
while trying to use my printertoday, an error message came up" server-error-service-unavailable". i cannot add the printer in the printer set-up. it is showwing up, so i know that the usb connector is working. has anyone ever encountered this before?
Hi aychekay
Try following:
- Add a TimeStamp Datatype Column to the table on the SQL Server
- Rebind the tables into your database
- Try your code again
You never should run an Access Application against an SQL Server in readwrite mode without having TimeStamp datatype columns in your tables. Already for performance reasons this is a must and also, if you have datetime datatype fields on
the SQL Server that are not exclusively maintained by Access, as the SQL Server may add miliseconds when writing the data. Same for Single precision datatypes, that may be rounded until you get the result back from the server. If you have a Timestamp datatype
column in your table then Access is sure the record wasn't changed in the meantime and will not recheck the received record again against the database for changes in one of it's fields.
Henry
<aychekay> wrote in message
news:[email protected]...
This problem didn't go away yet. I'm having it too in Access 2007 (SP2 not installed yet) with a SQL Server 2008 Express backend. I'm sure my code is not reference any form controls or other object references. Access just complains if you try to run an Execute
with "DELETE" on a table that has an identity column. I've resorted to deleting using a DAO recordset and loop instead for now.
I actually started out using MySQL with MySQL's ODBC drivers and my statement worked fine. Only when I migrated to SQL Server did I start to have this problem.
Just sayin...
Similar Messages
-
Getting error message "cannot sign in due to server error"
Why am I getting error message "cannot sign in due to server error" when I try to sign in to iCloud?
A software fluke or hiccup perhaps. Try closing the mail app completely, reboot the iPad and see if the message goes away.
Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the Mail app and then swipe "up" on the app preview thumbnail to close it.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
Error Message Using DB.Execute on SQL Server - Must use dbSeeChanges
Uh, found a post indicating that dbFailOnError and dbSeeChanges are enumerated and that to designate them both, just add them together, but its not working and I'm still getting the ever popular 'You must use the dbSeeChanges option with OpenRecordset when
accessing a SQL Server table that has an IDENTITY column.'.
Public Function deleteTrailerActivityHeaderAndChildren(lngTrailerActivityHeaderId As Long)
On Error GoTo Err_deleteTrailerActivityHeaderAndChildren
Dim wrksp As DAO.Workspace
Dim db As DAO.Database
Dim strDeleteChild As String
Dim strDeleteParent As String
Dim strComment As String
Dim errLoop As Error
strDeleteChild = "DELETE * FROM tblTrailerUtilizationDetails WHERE lngTrailerActivityHeaderId = " & lngTrailerActivityHeaderId
strDeleteParent = "DELETE * FROM tblTrailerActivityHeaders WHERE lngTrailerActivityHeader = " & lngTrailerActivityHeaderId
Set wrksp = DBEngine.Workspaces(0)
Set db = CurrentDb
wrksp.BeginTrans
On Error GoTo Err_dbExecute
strComment = "Delete child records"
db.Execute strDeleteChild, dbFailOnError + dbSeeChanges
If DBEngine.Errors.Count = 0 Then
strComment = "Delete parent"
db.Execute strDeleteParent, dbFailOnError + dbSeeChanges
If DBEngine.Errors.Count = 0 Then
strComment = "Commit changes"
wrksp.CommitTrans
Else
strComment = "Rollback changes to tblTrailerActivityHeaders"
wrksp.Rollback
MsgBox "Record cannot be deleted. Unable to delete the Trailer Utilization Detail records.", vbCritical
End If
Else
strComment = "Rollback changes to tblTrailerUtilizationDetails"
wrksp.Rollback
MsgBox "Record cannot be deleted. Unable to delete the Trailer Utilization Detail records.", vbCritical
End If
Debug.Print DBEngine.Errors(0).Description
On Error GoTo Err_deleteTrailerActivityHeaderAndChildren
Set db = Nothing
Set wrksp = Nothing
Exit_deleteTrailerActivityHeaderAndChildren:
Exit Function
Err_deleteTrailerActivityHeaderAndChildren:
MsgBox getDefaultErrorMessage("Module - Manage TrailerUtilization Details", "deleteTrailerActivityHeaderAndChildren", Err.Number, Err.Description), vbCritical
Resume Exit_deleteTrailerActivityHeaderAndChildren
Err_dbExecute:
If DBEngine.Errors.Count > 0 Then
For Each errLoop In DBEngine.Errors
Debug.Print getDefaultErrorMessage("Module - ManageTrailerUtilizationDetails", "deleteTrailerActivityHeaderAndChildren.Err_dbExecute", errLoop.Number, , "(" & strComment & ") " &
errLoop.Description)
Next errLoop
End If
Resume Next
End Function
David HHi aychekay
Try following:
- Add a TimeStamp Datatype Column to the table on the SQL Server
- Rebind the tables into your database
- Try your code again
You never should run an Access Application against an SQL Server in readwrite mode without having TimeStamp datatype columns in your tables. Already for performance reasons this is a must and also, if you have datetime datatype fields on
the SQL Server that are not exclusively maintained by Access, as the SQL Server may add miliseconds when writing the data. Same for Single precision datatypes, that may be rounded until you get the result back from the server. If you have a Timestamp datatype
column in your table then Access is sure the record wasn't changed in the meantime and will not recheck the received record again against the database for changes in one of it's fields.
Henry
<aychekay> wrote in message
news:[email protected]...
This problem didn't go away yet. I'm having it too in Access 2007 (SP2 not installed yet) with a SQL Server 2008 Express backend. I'm sure my code is not reference any form controls or other object references. Access just complains if you try to run an Execute
with "DELETE" on a table that has an identity column. I've resorted to deleting using a DAO recordset and loop instead for now.
I actually started out using MySQL with MySQL's ODBC drivers and my statement worked fine. Only when I migrated to SQL Server did I start to have this problem.
Just sayin... -
When opening iTunes, I get the following error message: "The registry setting used by the iTunes drivers for importing an burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes."
I have reinstalled iTunes twice and still get the message.
Any clues??
Thank you.I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
I have a WiFi system in the house that uses the Airport Extreme for a hub and an older Express for sending music from my Mac to my sound system. Everything worked great till yesterday. When I go to Networks I see the Extreme and I see the Express but the Express is no longer connected and I get an error message "this version of AirPort Utility doesn't support this base station". Any ideas?
This sounds as if you have an older AirPort Express that is no longer supported by the newer Mavericks operating system.
To check and see if that might be the case, locate the model number on the side of the AirPort Express. It will start with an "A" followed by four numbers. Hard to see in the faint print.....so you may need reading glasses or a magnifying class to see the model number clearly.
Model numbers A1084 and A1088 of the AirPort Express are no longer supported by AirPort Utility in Mavericks.
You will need to use a Mac running Leopard, Snow Leopard, or a PC to be able to administer the older AirPort Express. -
I am trying to hook up my Airport Express to my current network and AirPort Extreme but keep getting the same error message: "This version of AirPort Utility doesn’t support this base station. Go to AirPort Service and Support for more information." Any thoughts?
This sounds as if you have an older AirPort Express that is no longer supported by the newer Mavericks operating system.
To check and see if that might be the case, locate the model number on the side of the AirPort Express. It will start with an "A" followed by four numbers. Hard to see in the faint print.....so you may need reading glasses or a magnifying class to see the model number clearly.
Model numbers A1084 and A1088 of the AirPort Express are no longer supported by AirPort Utility in Mavericks.
You will need to use a Mac running Leopard, Snow Leopard, or a PC to be able to administer the older AirPort Express. -
Just upgraded to Lion an am discovering that I cannot send email photos from within iPhoto. Error message says bad Internet connection or server not working, when that's not the case. Never happened in Snow Leopard! Help!!!
what email service - Yahoo mail have been acting up lately
you can try setting Mail as your email client - it resolves this pfoblem for some people
LN -
Cannot print anything from internet using Firefox as browser. Please advise. I have to use Firefox for internet college courses, cannot print my assignments. I do not have this problem on Mac or using Internet Explorer. Only happens when using Firefox. When I select print a message comes up to save information to desktop as .xps file. Select save, sometimes it is on the desktop but I cannot open the file or it simply does not save file and get an error message that print command failed. What is happening?
{Ctrl + P} and select your printer in the Printer - Name box near the top of that window.
http://kb.mozillazine.org/Problems_printing_web_pages -
We bought Premiere Elements 10/Photoshop Element 10 a while ago and it worked brilliantly on our Window XP machine, but since we moved to Windows 7 last year we can't get Premiere Elements 10 to work properly and always get the error message 'A reduced set of content (Instant Movie Themes, Title and Menu templates, etc) has been installed. You can install the full content by inserting your Content DVD or downloading it. Do you want to install now?'. So I've tried reinserting the DVDs and installing them. I've uninstalled all the software and started again, but each time I get the same message at the end of the process. I've spoken to the computer shop I bought the computer from and they say Windows 7 is incompatible, but that doesn't seem to be what the Adobe web site says. Please, any advice welcome as I've got a year's worth of videos I need to edit.
Thank you!
Adobe Premiere Elements 10.0
Windows
2 GHz or faster processor with SSE2 support; dual-core processor required for HDV or AVCHD editing and Blu-ray or AVCHD export.
Microsoft Windows XP with Service Pack 2, Windows Media Center, Windows Vista® (all applications run native on 32-bit operating systems and in 32-bit compatibility mode on 64-bit operating systems), or Windows 7 (Adobe® Premiere® Elements Editor runs native on 32-bit and 64-bit operating systems; all other applications run native on 32-bit operating systems and in 32-bit compatibility mode on 64-bit operating systems)cathyj
Are you working with Windows 7 32 bit or 64 bit? What video card/graphics card does your computer use? NVIDIA GeForce? And, are you doing your download and installing with antivirus and firewall(s) disabled?
Premiere Elements 12 is compatible with Windows 7, 8, or 8.1 64 bit.
If you have tried to obtain the Premiere Elements 10 Content from the installation disc labelled for Content for your version and operating system and that is not working, then can try downloading and installing the Content from the following Adobe link if you do not decide to click on the message to initiate the content download from within the program.
http://www.adobe.com/special/premiereel/downloads/
We will be watching for your progress.
ATR -
Error when using Oracle Migration WorkBench (Sql Server 2k to Oracle 8i)
I'm trying to migrate a Sql Server 2k database to an Oracle 8i schema using OMWB. After using BCP to collect metadata information on the source database, I tried to capture the source data model and got a "Capture aborted" message on the progress screen (even though then it appears a dialog window reporting "0 errors and 0 warnings", funny!). Down there is the error log OMWB generated. After reading some posts, I changed some columns of the OMWB dictionary that holds the source database name, but still got the same error. If someone can enlighten me on this toppic, I'd greatly appreciated it.
Here's the error log of OMWB:
** Oracle Migration Workbench
** Production
** ( Build 20050629 )
** OMWB_HOME: D:\Datos\Download\Oracle\Oracle Migration Workbench\omwb
** user language: es
** user region: null
** user timezone:
** file encoding: Cp1252
** java version: 1.4.2_04
** java vendor: Sun Microsystems Inc.
** o.s. arch: x86
** o.s. name: Windows 2000
** o.s. version: 5.0
** Classpath:
..\lib\boot.jar
** Started : Fri Feb 23 17:18:48 GMT-03:00 2007
** Workbench Repository : Oracle8i Enterprise Edition Release 8.1.6.0.0 - Production
With the Partitioning option
JServer Release 8.1.6.0.0 - Production
Repository Connection URL: jdbc:oracle:thin:@ServerCms:1521:sigcewbc
** The following plugins are installed:
** Microsoft Access 2.0/95/97/2000/2002/2003 Plugin, Production Release 10.1.0.4.0
** Microsoft SQLServer 2000 Plugin, Production Release 10.1.0.4.0
** Microsoft SQLServer 6.5 Plugin, Production Release 10.1.0.4.0
** Microsoft SQLServer 7.0 Plugin, Production Release 10.1.0.4.0
** Active Plugin : SQLServer2K
EXCEPTION :SQLServer2KDisconnSourceModelLoad.loadSourceModel(): oracle.mtg.migration.MigrationStopException: java.lang.IndexOutOfBoundsException: Index: 15, Size: 15
** Shutdown : Fri Feb 23 18:00:50 GMT-03:00 2007Duplicate thread
Error when using Oracle Migration WorkBench (Sql Server 2k to Oracle 8i) -
hi, I'm a newbie wrt to mac printer operation.
1.I installed a mg3220 using the wps button on my smc barricade router and can print wireless with a windows 7 printer.
2. my wife has a mac. The printer is on and connected direcly with the usb cable.
she gets the error message " the printer is not connected".
how can we override this error message and print via USB?
thanks and regards.
jmpaqHi, I have 10.6.8 and an HP printer so it may be slightly different but I'll give it my best shot:
Go to System Preferences.
Click on "Print & Fax"
Near the top of that page you should see "Print" and "Scan" options. Click "Scan"
A button appears that says "open scanner"
The settings are different between the different scanner models so I'm not sure what the next window will look like, but it should be pretty straightforward from there. It will scan to a JPEG image which you can attach to an email. I hope that helps! Let me know if there's anything ense I can help with. -
When trying to import music files I get an error message Thea says "importer reported a generic error". Also when editing video, screen views look great but when I transfer to PC or flash drive video quality is very poor. Any suggestions?
chansen232
Premiere Elements 13 on Windows 7 (presumed 64 bit).....
1. Music files and error message...are these music files from iTunes? If so, convert them to .wav in iTunes to convert them to wav version, and then import the .wav version into Premiere Elements 13 project using Premiere Elements 13 Expert workspace's Add Media/Files and Folders/Project Assets from where you drag the wav version to the Soundtrack.
The following are the instructions for the iTunes converting
http://support.apple.com/en-us/HT1550
If any problems with the instructions, please let me know, and I will go through them with you.
2. How you set up the project and the export settings that you select greatly influence your end product result.
a. What are the properties of the source media?
b. What project preset did you (manually) or the project (automatically) set to match the properties of the source media.
(If you do not know, please tell us what you see for the readings of Editing Mode, Timebase, Frame Size, Pixel Aspect Ratio - even
if the fields look grayed out.)
c. For your export...Publish+Share/Computer/and then what? And what preset? Did you use the default settings of the preset or did you
customize the export settings of the preset under the preset's Advanced Button/Video Tab and Audio Tab?
Let us start here and then decide what next.
Thanks.
ATR -
Getting Error Message using Formatted Search
Hi,
I am using formatted search for validating a particular field, and that happens fine. Kindly let me know if I can also display error messages using the same formatted search.
If yes, what am I to include in the formatted search, and if No, please let me know the alternative.
Thanks in advance.
Satish.Hi Satish,
if you validate the value of a field and intend to rise an error message on detection of invalid values in a separate window or in the status line there is no way to do it with Formatted Searches (as far as I know)!
You could use the following methods as simple workarounds if you don't want to program a solution with the SDK:
1. Solution
You can display the text of an error message in the field you validate; of course, the invalid data then is overwritten with your error message, but you could construct the message from fixed text parts concatenated with the data found in the field.
Be sure to save the original data of the field in your query before you do anything else. This way you sustain the field data in case the data is valid!
Example:
DECLARE @save AS ....
SET @save = $[xxxxx]
IF $[xxxxx] test on invalid data
SELECT 'Error: Invalid data: ' + $[xxxxx] -- in case of error
ELSE
SELECT $[xxxxx] -- no error - sustain valid data
END
2. Solution:
You define a sepate User Defined Field (UDF) for potential error messages - that's the way I often programmed it for our own applications. Suppose that the Formatted Search is connected to this UDF and the field to validate is field 'xxxxx'. The Formatted Search is triggered (auto-refresh) on change of field 'xxxxx':
IF $[xxxxx] test on invalid data
SELECT 'Error: Invalid data: ' + $[xxxxx] -- in case of error
END
May be that there are minor syntactical errors or missing type conversions in the code above - but I hope it gives you an idea on how to solve your problem without SDK programming!
Good luck!
Frank Romeni -
"Communication Error" message when printer is the AirPort-connected
After two years of using (and hundreds of pages printed), the printing on the Epson Stylus Photo R340, connected to the AirPort Express ('n' edition) ends just after a few centimeters of printing (now it's in 100% cases), showing one of the error messages below:
- Printer paused (resuming/re-pausing leads to no further progress). In this case the printer is sometimes paused also un System Preferences > Print & Fax, but resuming in this level again leads to no progress
- Printer shows "Communucation Error"
- Printing dialog shows no error or pausing, but the result is the same as above
Removing the print task in printing dialog doesn't have any influence on the printer. In all these cases it's necessary to turn off the printer to start from the beginning.
When the printer is connected straight to the computer via USB cable, it prints as expected.
There were no software installations recently, except Apple system updates via Software Update.
Does it mean that Apple kisses the air printing goodbye or there's still hope to fix it?
Thanks for any ideasHello Syd,
thanks a lot for your suggestions. I appreciate Epson is monitoring forums like this! As I wrote above though, some of them I mentioned as performed (printer connected straight to USB port of the Mac). I also several times erased all the printers and added them again fresh, but unfortunately all still the same.
Just a few weeks ago, I printed a few dozens of pages and this happened after every about 20 pages and after printer restart, I was able to continue. Since I started this topic, the printer will not finish any single page over the AirPort Express, but prints fine when connected directly to the mac via USB.
I just don't want to bring it across the house (yes, I know I can share it on one computer for the others, but there's no room near the computer I work on and in addition, it worked before...).
So it looks like bad luck for me so far...
Message was edited by: Bjoehy -
Multipass F30 has error message "check printer" then "wrong cartridge".
Multipass F30 has error message "check printer" then "wrong cartridge". When I open the lid the printhead does not move to center. Manually moved and replaced cart with 2 new black carts. No change. removed power for 15 minutes. No change. What do I do next?
Hi DSCkeith,
It looks like you've already gone through the normal troubleshooting we would do to try and fix this issue. If what you have tried has not resolved the issue, service would be required. I recommend using the Contact Us link to get in touch with our support staff. They can provide any applicable service options.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
Maybe you are looking for
-
friends, need help once again. i have created one structre which is based on table pa0000 and pa0001. where pernr is primary key on both table. i have seen both table data and there is more then 5000 records for same key. my datasource ias based on t
-
Hi, After completing a scenario(eg:file to filr),how to test it...whether it is working fine or not.. Thanks in advance.
-
Page Created Under a Custom Scope
The create scope code copy from the guide: public String getScopeName() { String scopeName = "MyScope"; ServiceContext sContext = ServiceContext.getContext(); try { Scope scope = sContext.createScope(scopeName); // Creates a new scope this.scopeName
-
Third party integration property file DMSArgs Vs AuthorizationProxy.DmsArg
I'm trying to use AutoVue Web Services to convert files to pdf. Web services is deployed in application server. I need to know how the third party property file DMSArgs are defined and how it's retrieved from ISDK. Documentation example is as below.
-
My macbook pro mid 2012 will not start up. I was running bitdefender and when I went to see if it was done, I had the apple logo and the loading (winding circle) on the screen. I can not get out of this. I used my back up external drive and it did no