Error Message: Waitng for Timecode
I logged a number of clips and when I tried to batch capture them the tape was rewound, the time code on the camera was blank and I got a message stating: Waiting for Timecode. When I pressed the play button on the video camera it started and the capture began. Then it stopped and I had to press play again. Is there some setting in the preferences I should be looking at? Thanks.
Amy
This also happened when I tried to capture now. Once I pressed the play button on the camera the capture started.
That's the way 'Capture Now' is supposed to work.
But if you've logged the clips and it won't batch capture, then it sounds as though the timecode on the tape may be broken or bad.
Try setting device control in FCP to "Non-Controllable Device" and use Capture Now.
-DH
Similar Messages
-
Hi all,
Apologies: I've just joined the community and didn't quite figure how to write a msg! Hope it works...
Anyway,
I read many posts on this annoying error message (Waiting for changes to be applied) in the last 2/3 days, but they all refer to the sync staying stuck on it.
Mine doesn't.
I read the message, then it quickly shuts down the sync and the iTunes progress bar only shows the apple...
As suggested by many, I removed voice msgs, turned off/on, tried to sync in individual stages (calendar only...) but nothing works.
I am up to date on iTunes (11.1.1.11) and have IOS 6.1.3 on my phone, to sync on a Win8 pc (all worked fine until recently).
I have had this phone for several years and it has never done this.
It worked absolutely fine, until I loaded the latest version of iTunes it seems...
Any suggestions?
Many thanksALSO, on the iPod under Settings>General>iTunes Sync, you may need to back out of the "iTunes Wi-fi Sync," and reopen it to get it to update.
(I use iTunes 11.1.5.5) -
On my HP printer Officejet4620 I get an error message "waiting for printer to become available". Help please?
Restart the computer and restart the printer. If you continue to have the problem the follow the steps Apple outlines in Reset Printing System feature article.
-
Attempting to upgarde itunes and I get an error message looking for "an alternate path to a folder containing 'iTunes.msi' location. I've searched my hard drive and the file doesn't exist. What to do?
This worked...found on a prior discussion:
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page)...
http://majorgeeks.com/download.php?det=4459
From the link above (near the top of the page)....Under 'download locations' click on 'download@majorgeeks'
To install the utility, doubleclick the msicuu2.exe file you just downloaded and ran.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Restart your computer.
Re-download Itunes (latest version form Itunes website) and install. It worked! -
I had to restore my iMac from Time Machine. After the restoration all programs are functioning except my Adobe Creative Suite 4 Design Premium. When I start any program in the suite the error message, "Licensing for this product has stopped working." I restarted the computer and tried again to run Photoshop and the same error message appeared. The message was followed by a message that stated that I needed to contact Adobe technical support and mention Error: 150.30. I need Adobe technical support to provide me a solution for my problem so I can continue using my Adobe products installed on my computer.
Unfortunately when Adobe products are restored from backup, especial CS4 and especially Mac, it breaks licensing.
There is a python script included in the license recovery kit that should work if you are familiar with Terminal.
If not, you must reinstall your CS4 suite. You don't need to delete your preferences, so it should be the same as before.
Error "Licensing has stopped working" | Mac OS
Gene -
trying to launch photoshop cs3 on a mac running OS10.6.8 i keep getting the error message: Licensing for this product has stopped working you cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contacting your IT adminstrator or Adobe customer support for help
I already Uninstalled and reinstalled the product and it still does not work.Hi,
Try to uninstall the software again and you have to manually
Delete the following folders:
[Startup Disk]/Library/Application Support/Adobe/Adobe PCD
[Startup Disk]/Library/Application Support/Adobe/caps
[Startup Disk]/Library/Application Support/Adobe/backup
[Startup Disk]/Library/Preferences/FLEXnet Publisher/
[Startup Disk]/Library/Application Support/FLEXnet Publisher/
Go to Applications-->Utilities-->Disk Utility, Open it and Select the MAC HD and then click on Repair permissions.
After that try to run the cleaner tool as mentioned by kglad.
Restart machine and then try to install again.
*** Make sure , you only delete these folders if there is no other adobe applications installed on the machine. As if you have any other Adobe application of the suite ( not free applications ) then it will be a problem. -
LIV - credit memo : error message shown for unit price variances
hi
In LIV for Credit Memo, there is no warning nor error message shown for unit price variances (price different from that in PO). Request not allow to have unit price variances for Credit Memo. pls advice how can i do it
thanksHi,
If you are posting a credit memo against a PO you cannot post it for MORE than the value of the PO, the system gives you the message that says something like, the value entered is higher than the PO value and so the PO value has been used.
Is this giving you a particular problem?
remember that youare generating the credit memo and so you can ask the vendor for whatever you want (although you may not actually get it). It is not like entering an invoice where the vendor is specifying the values.
Steve B -
Further error messages exist for this transaction
Hello all ,
i am getting en error message "Further error messages exist for this transaction" while creating an opportunity from external number ranges
please help me out how to solve this.
Regards
AhmadHi Mohammad,
There might be any error transaction so there suppose to be an error insystem status. If you are able to generate opportunity number after saving than please do check in GUI with transaction crmd_order and check the message detail and revert.message detail is needed in order to proceed further.
Thanks,
Prem -
Error message display for radiobuttongroup using report_attribute_error_msg
Hi,
We are displaying error message on the submit button of a form. We have different UI elements in the form
which are mandatory to enter by the user. So we are using 'CALL METHOD lo_message_manager->report_attribute_error_message' method to display error.
When user click on the error message control will go the UI field which is caused for error.
This works fine for INPUT,DROPDOWNBYKEY,TEXTEDIT,RADIOBUTTON UI elements. Where error link is not working for RADIOBUTTONGROUPBYKEY/RADIOBUTTONGROUPBYINDEX ui elements.
Is this problem is with WEB DYNPRO ABAP or am i missing any property settings.
Please help us to resolve the problem. Does SAP Web Dynpro ABAP provide this functionality for RADIOBUTTONGROUPBYKEY/RADIOBUTTONGROUPBYINDEX?
Below attached written code for reference.
CASE lo_action->name.
WHEN 'SUBMIT'.
IF lv_radio IS INITIAL.
REPORT message
call method lo_message_manager->report_attribute_error_message
exporting
message_text = 'Please select something from radio button grp by key.'
element = lo_el_radio_node
attribute_name = `RADIO`
params =
msg_user_data =
is_permanent = ABAP_FALSE
scope_permanent_msg = CO_MSG_SCOPE_CTXT_ELEMENT
msg_index =
cancel_navigation =
is_validation_independent = ABAP_FALSE
ENDIF.
IF lv_text IS INITIAL.
REPORT message
call method lo_message_manager->report_attribute_error_message
exporting
message_text = 'Please KEY IN SOMETHING THE TEXTEDIT BOX......'
element = lo_el_text_edit
attribute_name = `TEXT`
params =
msg_user_data =
is_permanent = ABAP_FALSE
scope_permanent_msg = CO_MSG_SCOPE_CTXT_ELEMENT
msg_index =
cancel_navigation =
is_validation_independent = ABAP_FALSE
ENDIF.
IF lv_radio_group IS INITIAL.
REPORT message
call method lo_message_manager->report_attribute_error_message
exporting
message_text = 'Please select something in second radio group.'
element = lo_el_radio
attribute_name = `RADIO_GROUP`
params =
msg_user_data =
is_permanent = ABAP_FALSE
scope_permanent_msg = CO_MSG_SCOPE_CTXT_ELEMENT
msg_index =
cancel_navigation =
is_validation_independent = ABAP_FALSE
ENDIF.
Thanks
VenkatHi,
Try to use the method ADD_MESSAGE
lr_msg_srv = cl_bsp_wd_message_service=>get_instance( ).
lr_msg_srv->ADD_MESSAGE( IV_MSG_TYPE = 'E'
IV_MSG_ID = 'ZCRM'
IV_MSG_NUMBER = '001'
IV_MSG_V1 = 'Message' ).
Best regards,
Caíque Escaler -
Error message control for invoice w/o PO in SRM
Hi,
Anyone know how to setup error message if invoice value limit is above e.g. 10000 USD? Invoice will be entered without PO.
There will be no PO but invoice will be created and user should get error message if total invoiced value is above 10000 USD.
We are in SRM_SERVER5.5 with SP 06.
If anyone came across during IMS setup, please help me on it.
Thanks in advance.
Regards,
Rahul MandaleHi Atul,
Thanks for your useful answer. I am getting error message while creation of invoice. But problem is that it is throwing message for all invocie, need to consider if condition of 'GROSS_AMOUNT >= 1000 USD. During creation of invoice, it should throw msg 001 (YIMS) which I have configured as my exception in IMS when fulfills the condition.
I am sending code for 'CHANGE' and "CHECK' BADI.
Can you check and suggest the correction? Where I need to put this conditon for pop up of error while gross_amount >= 1000 while creation and change of invoice??
Thanks in advance.
regards,
Rahul
<b>method IF_EX_BBP_DOC_CHANGE_BADI~BBP_IV_CHANGE.</b>
DATA: ls_header TYPE bbp_pds_inv_header_d,
lt_messages TYPE TABLE OF bbp_smessages_badi,
ls_message TYPE bbp_smessages_badi,
lf_dummy TYPE c,
lf_gross_amount TYPE BBP_IV_AMOUNT,
i_guid TYPE BBP_GUID .
get data of the invoice from guid
CALL FUNCTION 'BBP_PD_INV_GETDETAIL'
EXPORTING
i_guid = i_guid
IMPORTING
e_header = ls_header.
IF ls_header-GROSS_AMOUNT >= 1000.
CLEAR ls_message.
ls_message-msgty = 'E'.
ls_message-msgid = 'YIMS'.
ls_message-msgno = '001'.
APPEND ls_message to lt_messages.
EXIT.
ENDIF.
<b>method IF_EX_BBP_DOC_CHECK_BADI~BBP_DOC_CHECK.</b>
Data ls_message TYPE bbp_smessages_badi.
*To create custom message
clear ls_message.
ls_message-msgty = 'E'.
ls_message-msgid = 'YIMS'.
ls_message-msgno = '001'.
append ls_message to et_messages.
endmethod. -
Error message display for PO creation with reference to internal orders
Sir,
While creating PO with Tcode ME21N (item category I) with reference to ' Internal Order with Funds provided (Tcode KO12), system displaying error message when Budget is exceeded.
But when Funds provision is not mentioned (Funds value is initial in KO12) , error message is not being given by the system during Po creation with ME21N.
Where should I configure in img(Tcode SPRO) , so that system will throw error mesage while creating PO without Budget Provision (Funds not mentioned ) in Internal Orders.
Regards,
Srinivasa MurthyHi Anupam,
The error message display as follows. (when the PO Price exceeds the Planned Funds kept for internal order)
This error comes during PO creation Process and PO can not be saved. This error message display is correct.
Item 001 Order 600643 budget exceeded
Message no. BP604
Diagnosis
In document item 001 Order 600643, budget for fiscal year 2009 was exceeded by 99,960,000.00 INR.
But my question is 'when funds have not at all been mentioned for the internal order' then system has to throw the same error as mentioned above. But it is not happening. System is allowing the PO to save which is not correct.
Regards,
Srinivasa Murthy -
Installation error message 1603 for itunes 8.0.2.20
Need help. Installation keeps failing. Says that it cannot install. I'm on XP Professional. Removed all Itunes and QuickTime software using MS Uninstaller. I've disabled ant-virus and firewalls. Below is the text from the ItunesSetup.txt in the temp directory
=== Logging started: 2/6/2009 15:06:18 ===
Command Line:
Using single-platform PRODUCTCODE.
Product to install: {F5C63795-2708-4D15-BF18-5ABBFF7DFFC8}
Information on cabinet file 'C:\Documents and Settings\TaranDiya\Desktop\iTunesSetup.exe'
Total length of cabinet file : 68878416
Number of folders in cabinet : 1
Number of files in cabinet : 7
Cabinet set ID : 0
Cabinet number in set : 0
RESERVE area in cabinet? : no
Chained to prev cabinet? : no
Chained to next cabinet? : no
fdintCABINET_INFO
next cabinet =
next disk =
cabinet path = C:\Documents and Settings\TaranDiya\Desktop\
cabinet set ID = 0
cabinet # in set = 0 (zero based)
fdintCOPY_FILE
file name in cabinet = iTunes.msi
uncompressed file size = 37101056
fdintCLOSEFILEINFO
file name in cabinet = iTunes.msi
fdintCOPY_FILE
file name in cabinet = QuickTime.msi
uncompressed file size = 27953664
fdintCLOSEFILEINFO
file name in cabinet = QuickTime.msi
fdintCOPY_FILE
file name in cabinet = AppleSoftwareUpdate.msi
uncompressed file size = 2083840
fdintCLOSEFILEINFO
file name in cabinet = AppleSoftwareUpdate.msi
fdintCOPY_FILE
file name in cabinet = AppleMobileDeviceSupport.msi
uncompressed file size = 13441536
FDICopy() failed: code 4 [Corrupt cabinet]
Executing: "C:\WINDOWS\system32\msiexec.exe" /i "C:\DOCUME~1\TARAND~1\LOCALS~1\Temp\IXP055.TMP\iTunes.msi"
Returning: 1603I am not sure about this particular error number. Looking it up in Windows Installer error messages, it says file in use, restart may be required. But I am not certain that it is a Windows installer error message.
It certainly is worth trying a restart.
I would also clear your temporary Internet files and re-download iTunes.
Also clear your temporary directory as that seems to be where the error occurred.
This article on trouble installing iTunes includes instructions for clearing the temp folder (towards the end of the page) and also other things to try.
http://support.apple.com/kb/HT1926 -
why cant this reset?
That old "Reset Utility" is ONLY for the 1st and 2nd gen iPod shuffle, which had some issues that prevented using the standard Restore in iTunes, so Apple release that utility. It was released when Windows XP was the latest version of Window; it does not work with Windows 7. But it would not help you if your shuffle is 4th gen.
When you say "reset," are you trying to do a Restore on the shuffle in iTunes, from the shuffle's Summary tab? When does that error message appear, exactly? -
I get an error message "waiting for activation" while trying to turn on imessage
I had to reset my Apple ID password. After doing this i now have to log back into everything that requires an Apple ID to operate on my 5C. I dont currently have cell coverage as im traveling in Italy for work and don't have international coverage. Is there a way for Imessage to verify my new AppleID password without recieving an SMS from Verizon. My phone is currently in Airplane mode with date and all roaming shut off to keep from getting an expensive charge. I have Wifi through a hot spot i carry with me but the Imessage gives an error message saying "waiting for activation" From everything i have found i guess it's waiting for network (Verizon) verification. Back to my question, is there a way to have Imessage verify my new Apple ID password over wifi using my email address instead of carrier verification? This seems to have worked for Facetime but i know facetime only uses Wifi.
Hey Andrew,
That is interesting issue. If you are still not activated with iMessage, then you will probably need to turn your cellular data on so it can be linked with your phone number. Go over the article below to walk you through some general troubleshooting to get it going.
If you get an error when trying to activate iMessage or FaceTime
http://support.apple.com/en-us/HT201422
Take care,
-Norm G. -
Error message. waiting for bridge cs6
can any one help me with the error message i keep getting? Waiting for bridge cs6.
Error: Waiting for Bridge | Mini Bridge panel
Maybe you are looking for
-
I have a large Itunes library of 16,000+ songs and when I am in my Itunes library, there are no duplicates. But, in my pc, there are duplicates of every song in different file folders. Does anyone have this issue?
-
ICal is doubling all entries past and future.
Each entry is on the date in duplicate. It started suddenly. I was traveling - that may be a factor, but it has not happened in the past. How do I revert to only one entry per event on my calendar? Thanks!
-
PS CS6 Won't open .prel (Premiere Elements) project files
Shouldn't I be able to move video files seamlessly back and forth between PS CS6 and Premiere Elements 11? (Hi Pierre! Great to see you are still here!) Paz
-
10.2.0.2 Upgrade Tips
Yesterday I tried to upgrade my 10.2.0.1 to 10.2.0.2 on my RHEL3 box,then I run into the problem with the "ORA-00821: current sga_target=210M , need at least 316M" during the postinstallation when I tried to startup upgrade. Luckily I found a solutio
-
Hi All, We have CUA configured for our whole landscape within our Solution Manager Server through which we are currently managing the user masters. However, if there is any crash on this server, we will end up waiting till this server is up and runni