Error message when posting invoice : Day-end closing not defined

Hi,
In our training environment we migrated from FAGLFLEXT to FMGLFLEXT and activated fund management.
Now when posting an invoice the system provides an error message: "FQ252 Day end closing not defined".
There is no configuration related to F845 but we are prevented from posting the document due to this error message.
Any idea of where this could come from and of what need to be done to prevent this from happening?
Rgds
Sophie

Hi Sophie,
Can you check if you have entries in either PSO43 or PSO43USER tables (can be accessed via F8O2 transaction)?
Regards,
Eli

Similar Messages

  • I am getting a 42404 error message when opening itunes and itunes will not let me connect my iphone to it trying to get me to restore. I need help?

    I am getting a 42404 error message when opening itunes and itunes will not let me connect my iphone to it trying to get me to restore. I need help? I am not that technically inclined and really simple terms  are appreciated.

    Try downloading the songs from a different device. If you are doing it from your iOS device, try form your computer.

  • Received this error message when starting iTunes and reinstalling does not resolve it:  The registry settings used by iTunes drivers for importing and burning CDs and DVDs is missing.

    Received this error message when starting iTunes and reinstalling does not resolve it:  The registry settings used by iTunes drivers for importing and burning CDs and DVDs is missing...
    Can I uninstall existing iTunes without losing my media library?  and then install fresh to fix this problem?

    Hi there kweitkamp,
    You may find the troubleshooting steps in the article below helpful.
    iTunes for Windows: "Registry settings" warning when opening iTunes
    http://support.apple.com/kb/TS3299
    -Griff W. 

  • Error message MH 175 "The listing end is not allowed to be in the past"

    Hi,
            While I try to execute listing in the new article creation using particular disctribution chain, i.e. with reference to a Sales Org and distribution channel, the error message MH 175, 'The listing end is not allowed to be in the past' popped up. Can you please help me on what could be the cause for this error to be displayed.
    thank you
    regards
    prahlad

    Hi,
       Go to mm42.. enter the article number and distribution chain and then select the Listing View.... Please check the "Listed to" and "for Sale till" date is in past. if so change the date to future and try agian.
    Regards
    GK

  • Error message - attributes of the user inconsistent or not defined

    Hi,
    We are in SRM 7.0 have created new plant and some users assigned to this plant.
    However when logged into portal page, it gives the error message ' Attributes of the user inconsistent or not defined' see PPOMA_BBP.
    When checked in the org structure the data entered are correct.
    What could be the reason for this error message.
    Rgds,
    Madhan

    Hi,
    Please check the following in the org structure in PPOMA_BBP for the users
    1. Check whether the attribute for the ITS --URL is given.
    2.Check the attribute for the company code is given.
    3.Check whether the Roles for the users is given
    in addition go to the check  tab and check if any Red mark are there.
    correct those attribute.
    The error is basically related to  the PPOMA_BBP only
    Regards
    G.Ganesh Kumar

  • Error message when updating Itunes...can not open Itunes program

    I am recieving error message when updating Itunes for my computer.  The error message reads "MSVCR80.dll is missing and the other error message reads Error 7  (Windows error 126)"  I can not open my Itunes.  I have reloaded the Itunes onto my computer but still have the same error messages.  Please help.

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99364)

  • Error message when posting revaluation "deprecation not posted completely"

    Hi Gurus
    When I am trying to post revaluation to an asset, using AR29, I get an error message APERB027 "deprecation not posted completely".
    I have run AFAB for period 01/2010 and the entry in TABA is correct.
    Can any one help me solve this?
    Thanks
    Gil

    Hi
    I am trying to post revaluation for 31.01.2010 (asset was capilized on 01.01.2010)
    I have ran AFAR, and it didn't have any effect

  • Error message when doing invoice verification.

    Hi Gurus,
    During doing invoice verificition with delivery notes.Im getting a error message that level F1 belong to cash postion,source symbol PSK.Plz any body can help me to solve it
    Thanx

    Hi
    Planning level  belongs to the cash position, which means you can only use it for G/L account line items.
    Levels are defined and allocated to a source symbol in view V_T036. The source symbol is allocated to the cash position or the liquidity forecast in view V_T039.
    Please check these Tables using Transaction SM30

  • Error message when posting a billing document.

    Dear Gurus,
    I want to release to accounting a billing document but the system shows following error message:
    *Reconciliation account 140030 or short key 00 is not permitted*
    Please can anybody help me with the error?
    Best regards,
    Juan

    HI,
    Have you done the Revenue Account Determination
    Goto Tcode: VKOA
    Goto - IMG - SD- BASIC FUNCTIONS - ACCOUNTASSIGNMENT/COSTING -
    1. REVENUE ACCOUNT DETERMINATION
    2. RECONCILIATION DETERMINATION
    Regards,

  • ?Error message when opening PE11. (online services could not be initialized. Please reinstall)

    When opening PE 11, error message : online services could not be initialized. Please reinstall appears. Reinstalls does not fix problem. What do I do next?

    You should be able to launch without ols. Can you try directly from the application in the following location:
    C:\Program Files(x86)\Adobe\Photoshop Elements 11
    Double click on:
    PhotoshopElementsEditor.exe
    Let us know if that works.
    If not, try downloading the missing file from the following link (it says PSE10 but should work) and unzip the folder to extract the file and drag it into the assets folder.
    http://helpx.adobe.com/photoshop-elements/kb/welcome-screen-keeps-running-auto.html
    If that doesn’t work I would suggest uninstalling via the control panel and installing from a fresh download. You can download the free trial from this link and then validate with your serial number.
    http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us&PID=2159997

  • Always get an error message when installing airport extreme. Can not figure out why.

    Hi.
    I purchased four months ago a new airport extreeme base station in apple store in Amsterdam.
    I connected the router to the airport extreeme And orange light flashed from it. I went to the wifi menu and chose from a list of available networks in airport extreeme. As soon as I select it the air port utility start automaticly and is begon to scan of my networks .at the end of it he did not recognize the product and giving me an error message every time. An unexpected error occurred please try again.
    what should i do ???

    Okay so I tried to connect it physically with a cable directly into the computer.
    I opened the window settings
    Here's a picture A
    After doing a configuration he asked me to give him a Password. I gave him a Password and then he started doing a scan. After which he again wrote me an unexpected problem occurred and to try again.

  • Error message when I email - the email is NOT sent -

    When I try to email, I get the following error message, UNLESS I'm emailing to myself -
    Cannot Send Mail
    A copy has been placed in your Outbox. The recipient "whoever I'm emailing.com" was rejected by the server because it does not allow Relaying.
    Help - thank you.

    I also am having the same problem on my iPhone3, although the recipients have only started being rejected on this basis after I upgraded to v.4.2.1. My smtp settings are correct and have not been changed and I can receive mail OK. The local Vodafone iPhone was unable to help.
    Any suggestions for a fix?

  • TS1538 Error message when connecting iPod Touch :iTunes could not connect to this iPod. An unknown error occured. 0xE

    This is the error message I get whenever I try to connect to itunes with my iPod touch or iPhone 4.

    I would try:
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • All of a sudden I get error message when using Mail " Sender address rejected: not owned by user dgill42041"

    I've been using Mail for years with no problems, accessing my AOL accounts.  Today I can receive mail but not send.  I get the above error message and it says that my mailboxes are "off line". 

    Mail troubleshooting - Yosemite
    What does Mail/Window/Connection Doctor Show? If the server is red, select it and look at the Show Details box.
    Troubleshooting sending and receiving email messages
    Troubleshooting sending email messages
    SMTP servers keep going offline

  • How to pop up error message when printing invoice / delivery note

    i have a problem that when I'm going to print the invoice (VF03), i have to check the field displayed e.g. port of loading, final destination should not be empty.If both are empty, when user is ready to print, then alert message is displayed (e.g. Please return to the invoice to fill in the port of loading / final destination) and is not allowed to print it out
    i'm using Zxxxxx program (including the subroutine)  and SAPScript form Zxxxxxx ,in the form, i use "PERFORM XXX IN PROGRAM ZXXXX" to call the parameter,so how can I do the alert message and stop the printing process and Do i write a checking subroutine in the program and perform that subroutine , so that when that required fields are empty, then show alert when printing?
    PLs advise

    Hi Sky,
    i wont suggest you to give a pop up as if you try and execute the invoice in background it would cause termination.
    Standard way of doing it is by updating nast entries. You can refer below mentioned pseudo code. You can also refer to any standard driver program & form attached to a output type for  more code.
    The below code would show your output condition in error status if your condition fails.
    **Do you validations in the print program and  check for return code.
      IF SY-SUBRC NE 0.
        PERFORM PROTOCOL_UPDATE.
        RETCODE = 1.
        EXIT.
      ENDIF.
          FORM PROTOCOL_UPDATE                                          *
          The messages are collected for the processing protocol.       *
    FORM PROTOCOL_UPDATE.
      CALL FUNCTION 'NAST_PROTOCOL_UPDATE'
           EXPORTING
                MSG_ARBGB = SYST-MSGID
                MSG_NR    = SYST-MSGNO
                MSG_TY    = SYST-MSGTY
                MSG_V1    = SYST-MSGV1
                MSG_V2    = SYST-MSGV2
                MSG_V3    = SYST-MSGV3
                MSG_V4    = SYST-MSGV4
           EXCEPTIONS
                OTHERS    = 1.
    ENDFORM.
    Hope this Helps you.
    Sumit

Maybe you are looking for

  • Online videos are no longer working, how do I fix this?

    I have just very recently downloaded a trail version of Adobe Flash CS5 onto my laptop. The version of windows is Windows XP, and the program itself is running as well as it should. I thought it would be helpful if I went to youtube to see if there w

  • Photo Gallery Template customisation

    I would like to look creating specialised template to use in the Adobe Bridge photo Gallery output module.  Problem is I cant find where the current templates are stored so I can have a look at what is required to change them so I can create the revi

  • Reading of accented characters in US-ASCII format in Exchange 2010

    I finished a migration from Exchange 2003 to Exchange 2010. I have one unsolved problem. An internal application generates and sends automatically reporting mails using the US-ASCII format through an anonymous Exchange 2010 Receive connector. This co

  • Archiving song gb 2 vs. 3

    Here's my problem. A friend and i are trying to record a song together. He's using gb 2 and i gb 3. He archived the file and zipped it, then sent it to me using yousendit. When i got it and unzipped it you could see it saying "unzipping track23.aiff"

  • I just need some drivers, READ

    I have an Audigy 2 ZS and I have a Athlon 64 3200+, so I got the BETA Microsoft XP x86 Professinal, which is 64 bit, Im sure you have heard this before. So blah blah blah blah..... I want a link to some drivers that will work with this system... and