Error Message When Saving a File

I'm running PSE 10 on a Mac OSX 10.6.8. When I tried to save a file recently I received the following message: "Could not save as FILENAME because you do not have necessary access privileges". It occurred when I attemped to save as a PSD and JPG.
Any ideas??
Thanks.
Ken

bc_aftersave.htm is a file that lies within Dreamweaver's Configuration Commands. Usually is required when working with Business Catalyst.
The error you see may be caused due to a faulty file.
I'm attaching the file at fault - 'bc_aftersave.htm' in this thread. Download and restore it to the following folder:
C:\Users\<username>\AppData\Roaming\Adobe\Dreamweaver CS6\<language>\Configuration\Commands
Locate the file bc_aftersave.htm, replace that file with the one I'm attaching here to see if it solves the issue.
-ST

Similar Messages

Error message when saving .fm file

I just upgraded my FrameMaker program to 7.2.
When I try to save my work, the following message appears on-screen:
An internal error occurred while writing imported graphics in this document. The file has been saved, but has lost some image data. Please report this error to Adobe Technical Support.
My file has NOT been saved, none of the changes I've made have been saved. I cannot save this file under a different name, either. And the automated files that are generated by the program as "back-up" files are useless.
HELP!!!

Upgraded to 7.2..... Good that you didn't rush into it. ;- )
Anyway, that's the standard error message when a file contains objects imported using an OLE link AND you are running XP SP3.
SP3 implemented security fixes that essentially broke OLE within Frame (and a number of other applications).
So if your document(s) contain OLE links, you're likely to have to convert them to imported-by-reference graphics if they're graphic files or do some other type of conversion if they're tables or PPT slides.
Art

Error message when saving a file in DW -CS6

When I go to save a file in Dreamweaver CS6, using Windows 7 -
I get this error message.
"While Executing onLoad in bc_afterSave.htm, the follwing javascript errors occured"
In File "bc_aftersave.htm";
onload is not defined
Everything was fine for years now I get this annoying error message. The file saves but the error message always pops up.
I am using the Adobe Application Manager and getting my software through the Adobe Cloud.
I tried deleting the configuration file with th expectation that DW would automatically create a new one but that did not work.
I'd hate to have to unintsall and reinstall DW because I have dozens of sites that I would need to resetup
Any help on this??

bc_aftersave.htm is a file that lies within Dreamweaver's Configuration Commands. Usually is required when working with Business Catalyst.
The error you see may be caused due to a faulty file.
I'm attaching the file at fault - 'bc_aftersave.htm' in this thread. Download and restore it to the following folder:
C:\Users\<username>\AppData\Roaming\Adobe\Dreamweaver CS6\<language>\Configuration\Commands
Locate the file bc_aftersave.htm, replace that file with the one I'm attaching here to see if it solves the issue.
-ST

How do I avoid error message when saving combined files?

I combined about 350 .pdf files into a single .pdf file using Acrobat 8 Pro. Total file size is about 3.5GB. I can assemble them in a correct order but saving them results in the following error message: "The document could not be saved. A file I/O error has occured."
I tried doing a "Save As" with no luck. However, I was able to save about half the files (1.6GB) with no problem as a separate combine process. I suspect it's a file size problem. Is there a file size limit? More important, is there a solution/work around?

Thank's tyr67. I'm using Vista. My work-around will probably require me to
break the file in two parts. Not a great solution, but on that will allow
me to move forward.
Thank you for responding.
C

Error message when saving a PDF to PNG: Error attempting to write file.

I get an error message when saving a PDF to PNG. JPG and TIFF works, but no PNG.
Disk space is sufficient! 100GB of 250
A few weeks ago it was no problem to save as PNG. But now! (Perhaps from last update?)
Messages:
When clicking "Ignore":
Adobe Acrobat XI Standard
Version 11.0.09

I have this issue too, but my colleagues do not have this issue(we have same Acrobat Pro 11.0.09). I am sure this issue happens only you updated to 11.0.09, because when you use Windows Restore back to 11.0.08, no issues.

Error message when compiling book "file is corrupt" referring to a photo. Or "cannot find original photo". Can you use photos that have been "edited" out of "Book Mode"?

Error message when compiling book "file is corrupt" referring to a photo. Or "cannot find original photo". Can you use photos that have been "edited" out of "Book Mode"?

I did copy it to my desktop, but it still won't let me open it. I think the file on the disc might be corrupt or something like that though the cd itself checks out fine as far as viruses go. I was able to verify the disc, but that's about it. My husband tried it on his iMac and we have the same issue. It's unzipping the folder, but won't let us open the folder on both the Mac Book Pro or the iMac by double clicking, going to file/open or right clicking. It just keeps saying the same message as I posted above. I think I'm just going to have the client put the pictures on either a memory card or a USB memory stick so she won't have to compress the files for zipping purposes. It's been too frustrating trying to open this folder on this cd she gave me. She said she created/zipped the cd on her Mac Book Pro but it sure won't open on mine.

"This file cannot be found" error message when saving document

Hello,
Strangely, every time I click "save" in CS6 it opens up a 'Save As' window, (which shouldn't happen), then I click save witht the existing file name (it then tells me the doc already exists), I click OK, (and then OK to the next popup window) then get the message that "This file cannot be found". I'm forced to click "ok" and the doument isn't saved. I've tried saving it differently in previous versions and it still doesn't work. I recorded a video of this behavior. You can see it here - http://screencast.com/t/W1GYK0zsrk
Why would it be trying to find a file? It seems like an error message when trying to Open a doc, not Save a doc.
Please HELP!! I can't shutdown my station until I get the document to save.

Yes, Mohit1233 - it happened with every file yesterday. Finally, I closed the doc (forcing me to lose my work), then restarted my computer and today the problem is gone. I'm working on a PC (HP);
Barblove - I tried doing that yesterday (copying and pasting into a new doc), and still nothing. I also tried copying the work into a CS3 doc (but got an error message).

"Unknown Error" Message when saving Illutrator CS3 file

I get this unknown error message when attempting to save an illustrator file.(CS3). I tried to open and then save several files with the same resulting error message. As a work around, I have reverted to working in CS2 until I can get this resolved.

Chris -
Thanks for your quick response.
Do I understand you correctly in saying that Photoshop CS3 has PostScript information that it routinely sends to a printer, and therefore I would need to have a PostScript compatible printer inorder to work with this information (and also for my ColorMunki calibration to work)?
Based upon what you said, I think my color problems are because the ColorMunki profile for my printer, paper, & ink combination are being ignored.
Tom

Error message when saving to a:\ drive when no disk present

I am using a Jfilechooser andsaving images using ImageIO, but I want add in the code necessary to display an error message when the user tries to save to the a:\ drive but there is no disk present. How would I do this, this is the code so far:
JFileChooser chooser = new JFileChooser();
chooser.setApproveButtonMnemonic('a');
chooser.setApproveButtonText("Save");
// create a file chooser with save dialog
int returnVal = chooser.showSaveDialog(c);
// If the user selects ok
if (returnVal == JFileChooser.APPROVE_OPTION) {
// Get the file the user selected
File file = chooser.getSelectedFile();
/ Get the name of the selected file
String name = file.getName();
     // Set the format name to null
String formatName = null;
// Get the index number of when the . occurs in the file name
int dot = name.indexOf(".");
     try {
     if(dot == -1) {
     file = new File(file.getParentFile(),
name + "." + defaultExtension);
     formatName = defaultExtension;
     else {
// else get the format name using a substring.
     formatName = name.substring(dot+1);
     // If the image cannot be saved, display an error message.
     if(!ImageIO.write(bi, formatName, file)) {
     file.delete();
     JOptionPane.showMessageDialog(c,
     "The image could not be saved. Please ensure that the extension is .jpg or .png",
     "Image save failed",
     JOptionPane.ERROR_MESSAGE);
     else {          // The image can be saved, so display a confirmation message
     JOptionPane.showMessageDialog(c,
     "The image has been saved to:\n"+
     file.getPath(),
     "Image Saved",
     JOptionPane.INFORMATION_MESSAGE);
     catch(IOException e) {               // Display an error message if save fails.
     JOptionPane.showMessageDialog(c,
     "The image could not be saved, no space on disk!!\n" + e,
     "Image save failure",
     JOptionPane.ERROR_MESSAGE);

Again I have tried this, but in my program if I try to save to the a drive when no disk is inserted, the JOptionPane i want to display is not coming up.
the system prints out
java.io.FileNotFoundException: A:\image.jpg <The device is not ready>
If that makes any sense to you

Looking for some help with an error message when exporting master file. I'm stuck and would even pay to get this sorted out!

Hey guys, I'm really in a bind here and need some urgent help tonite. I would even be willing to pay for some actual help and not some vague information that i may not be able to understand if we could do something via skype or some other way that would be much quicker than a message board. Of course I have to have the project done by tomorow . so I'm new to fcpx, but have succesfully exported 2 other projects. I've also ran into this predicament before (error message not allowing me complete export) and have been able to solve that by converting the files i imported off my camera (canon g20) to a different file type (prores).
so where I'm at now: i have a 13 min short, all shot on my canon g20, imported and converted to prores422 with the brorsoft video converter with all the shots in a single event in fcpx. i'm using fcpx version 10.0.08. I have one main video track in my timeline that is completely full of very fast edits. (all quick 2-5 second clips, sped up shots in 2x, 4x, or 8x, tons of transitions, titles, and a little fx. theres 2 audio tracks, one is narration/speech and the other is an ongoing music track that constantly ducks everytime the subject speaks (tons of ducks/edits). Have you seen mtv cribs? Well i filmed an EXACT replica. So If you've seen one of those episodes, its literally the same exact same thing. I have all of my work completed, everything has been fully rendered, and i have it exactly as I want it.
I'm including all this information in case it may help. my successful projects ive exported in the past were rather simple, and this one is very complex and full of edits. here is what it looks like in the timeline:
Ive tried exporting the master file using almost all the different ways with no luck. My primary objective is to get it on youtube by any means by tommorow for a showing to a potential buyer (long story) and so I've been told using the h.264 is the best format for that. This, along with the other methods give me the same error message:
It think it gives this error message when i reach 24% everytime during export.
So first of all, what is that error message? Do i need to be concerned about the specifics of it, or is there something major that I'm missing? Like i said, i dont care how, but I need to get this video up on youtube tonite for an important viewing tomorrow. Conceptually, I think if i can figure this one out I shouldnt have any more trouble in the future doing something so basic, yet critical, such as exporting my 40+ hours of work for someone to see.
anyway, I apologize in advance for my lack of knowledge with this software, and for my extremely long winded question which will probably have the opposite effect for me as most wont want to take the time to read all this, BUT i figured if i was as thorough as possible it might help actually getting a concrete answer, instead of a "read the manual, exporting is on page 37." or "use the share button on the right of the timeline then just click export master file and it will work everytime."
Cheers everybody, and thank you. Like i said if someone is up, and willing to talk via skype, phone, messanger or any other method that works for you I would be totally down and will compensate you generously for your time. thanks again.
Taphabit

boom! that advice was correct and worked. i was able to export the full project as a quicktime movie and it can be uploaded to youtube.
NOTE, theres is definately quite a few noticeable audio glitches/lags/pops that werent there before doing this. I believe, and will test to make sure, that having a project such as this one needs to render before exporting. I'm not sure if the advice requires the project to be unrendered before exporting for a specific reason, because if it will export fine after rendering the project that's the way to go. like i said the edited version i have in my timeline plays back perfectly but this exported version has quite a few noticeable audio glitches (a few video glitches too). I'm going to retry doing the first few steps of your advice, but then at the end render, then export and compare the results...
OK, so this leads to a big question, Is this something that is standard for everyone when trying to export? If its not, what causes this error?
is there any way of preemptively avoiding it in future projects?
thanks again, and hopefully this information will help others as exporting seem to be one of the biggest problems in fcpx. any word on a new patch or firmware update?

Error message when saving a jpeg after updating to Mountain Lion

I've just updated to Mac Mountian Lion and I'm getting an error message when I go to save a jpeg in Fireworks CS6. I've attached a screenshot but the message says "Could not save the file. The file could not be found". But it actually does save the file. This is very irritating and wondered if anyone else had come across this or found a solution. I believe I'm up to date on all my FW updates. I notice that this seems to do it when I use image preview to save. Thanks for any help!

I believe this issue was recently discussed in the following thread:
http://forums.adobe.com/thread/1041918?tstart=0

Error message when opening CS6 files in earlier versions

PSCS6 with 12.0.4 update. Mac OSX 10.8.2 16GB 1333 Mhz DDR3 543 GB Available
I've recently become aware that other people are getting an error message when opening many of my my psd files if they are on earlier versions of PS and also on PSE, (including the latest version). The message is:
This document contains unknown data which will be discarded to keep layers editable. To preserve the original appearance instead, choose flatten to load composite data as a flattened image.
Three options follow: Flatten Cancel Keep Layers
When 'keep layers' is selected the file opens as normal. However, people with much earlier version (CS version 8) don't get the option to keep layers, and the layers are flattened when the document is opened.
I still have CS5 on my mac, and I find that if I take my finished file into CS5 and save it there, the customer does not get the message above, and the file behaves as it should. Those on very early version of PS can also open the files without any issues.
I've been using CS6 since it was released and have had to delve through all my files and save them in CS5. Not every file is affected and I've been unable to find a common thread.
Hoping someone can throw some light on this.

This similar to the message one should get in an older version of photoshop such as photoshop 7.
If one presses ok instead of read composite that might preserve the layers with the original look.
But sometimes if a layer blending mode or some other feature is used an earlier versions of photoshop doesn't have, reading the composite is the only way to preserve the look of the image.
You said your using shape layers?
If they are shape layers you didn't use a stroke from the tool options bar?
Can you post an example of the image with the layers panel visible that you get that message with?
I guess your using photoshop cs6 with the 13.01 update?

Error message when saving an modified XL Reporter in Microsoft Excel

Dear all
I have encountered an error message when I tried to save an modified XL report in Excel.
The error message is:
An error occurred while trying to save the report definition! Object variable or with Block variable not set.
The user now is using 200B PL 42 with Microsoft Excel 2003.
Thanks in advance for advices.
Thank you.
Regards,
Catea k

Hi Catea k ,
for thies error Object variable or with Block variable not set
Please evaluate if OSS notes ##559043, 571831 and 575434 are applicable to your situation
also check SAP Note 1227475 - Object variable or With block variable not set (processing)
Note 1132338 - Object variable or with block variable not set
Note 1180272 - Object variable or with block variable not set
Note 1100521 - Object variable or With block variable not set[Create Temp T
refer this thread also
Object variable not set - Run-time error 91
Regards
Abhishek

Error unknown message when saving ai file

Several days ago I got an external hard drive to backup. Had an error message saying all wasn't saved right. I use CS2 suite, all works fine except my illustrator files will not save as ai. They will save as jpeg, pdf, eps, but not ai. Error unknown message window popsup. Also 3/4 of my file names have turned from black to blue. I have reinstalled CS2 and this didn't fix the problem. What went wrong? How can this be fixed? I'm working on a book using Illustrator files alot.

PC - Windows, no fonts were installed. Only the ai files are affected. But nearly 3/4 of all file extension names have changed from black to blue. No big deal on that, but the ai saving is very upsetting.
Thanks,
Garry
What platform?
OS?
Computer Model!
Did you install any fonts?

Strange error message when saving Photoshop CS5 files

Once in awhile, and only with some files, I get the following pop-up message when I save an image that I've been editing in Photoshop CS5:
"The disk copy of <filename> was changed since you last opened or saved it. Do you want to save it anyway?"
Unless I'm missing something, this is the most idiotic message I've ever seen. OF COURSE I want to save it. And why? Because the file has changed.
Can anyone tell me why this message pops up and whether I need to do anything about it?
Thanks!

The details shouldn't really matter. But OK: I'm running Photoshop CS5 on a 2010 iMac 3.06GHz i3 with 8GB of RAM and OS X Mavericks 10.9.2 installed. I save my files the old-fashioned way: Command-S.
I've been using Photoshop since version 1.0 and have never seen this message before. An explanation would be appreciated.

Error Message When Saving a File

Similar Messages

Maybe you are looking for