Error message when searching for an object link within EasyDMS

Hello,
I have a problem with the easydms system. Everything works fine except searching in the object links. When I want to define an object link and I don't know the name of the object I try to find it with the help of the search function within easydms (within the object links).
But the search always delivers an error message:
"Missing authorization check to display master data"
Does anybody now what to do?
Thank you for your help.
Best regards,
Markus Sigl

Hi Markus,
When you try to do this the BAPI 'BAPI_HELPVALUES_GET' is used. There are some authorization checks that are being performed for the object. These authorizations are maintained in the table BAPIF4T.
For the above said test data, you are trying to get the help values for
the relevant field (e.g. EBELN: po_number).However,in table BAPIF4T the corresponding authorization for the data element ebeln is not maintained. And so you are getting this error.
So, when you maintain the below record in the table BAPIF4T,you will
have the corresponding authorization and you will not get the error
anymore.
sample entry:
Object type - ' '
Object type component - ' '
BAPIF4T-DTEL - 'EBELN'
BAPIF4T-FNAM - 'PLM_HELPVALUES_AUTHCHECK'
Best regards,
Christoph

Similar Messages

Error message when searching for payment [FJ]

Hello,
My client is searching within (SBO2005A SP:01 PL:41) the incoming payments and gave a * in the number field. This is in combination with Add-on Financial Journals.
When you select button 'Search' the following error comes up:
FJ: Save_FJ_PaymentValues: 1). [Microsoft][ODBC SQL Server Driver][SQL Server] Syntax error convert this varchar value '*' to a column of data type int.
I couldn't find a SAP note on this but I don't think this is due to wrong use of searching criteria?!
Regards,
Petronella
Edited by: Marc Riar on Feb 14, 2008 10:11 AM

Hi Suda,
This application is from a Belgium Partner, but according to SAP NL supported by SAP?!
Regards,
Petronella

The following error occured when searching for on-premises exchange server

I look after a company where I installed a new DELL server last year, The server is running Windows Small Business Server 2011 which we installed. Exchange 2010 was installed as part of the Windows Small Business Server 2011 installation. At the time we
did not configure Exchange because they use external POP accounts for email. Eventually they wanted to move over to Exchange
When we created the user accounts using Windows SBS Console, it created a local mailbox for each user
No problems - [email protected]
Since late last year every time I create a new user within SBS Console, it errors creating the mailbox
Add a user account and assign a user role
Getting "Unexpected error occurred" when Setting up an e-mail account for user
Looking at the error "Unexpected error occurred" & MessagingManagement "Unexpected error occured"
The user account is created ok just no e-mail address is created for the user
I never thought much about this at the time as we weren't using Exchange email accounts. I decided to have a look at this issue over weekend
When I try to open Microsoft Exchange Management Console I'm getting "Initialization failed"
The following error occurred when searching for the On-Premises Exchange server
When I try to open Microsoft Exchange Management Shell, I get a similar error
I've download & run EMTShooter which just identifies there is an error & gives me the same error
I've installed & re-installed WinRM IIS Extensions
I've checked all the settings in IIS, Default Web Site, PowerShell, Modules & Paths...
Still cannot connect to Exchange
I've trawled through the internet for two days checking & testing every solution but no luck
I've checked every setting against another Windows SBS 2011 Server we've installed & works
I cannot find a difference
Can someone help me or point me in the right direction?
Peter Ralphs

Thanks for the reply Cara
Here's the original error I was getting when opening Exchange Management Console
Initialization failed
The following error ocurred while searching for the on-premises Exchange server:
[server.myd.local] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid.
For more information, see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentVersion 'Version 14.1 (Build 218.15)
I got similar error when trying to access the Exchange Management Shell
VERBOSE: Connecting to SERVER.myd.local
[server.myd.local] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid.
For more information, see the about_Remote_Troubleshooting Help topic.
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [],
PSRemotingTransportException
+ FullyQualifiedErrorId : PSSessionOpenFailed
When I opened the Exchange Management Console this week, the error had changed slightly
Initialization failed
The following error ocurred while searching for the on-premises Exchange server:
[server.myd.local] Connecting to remote server failed with the following error message : The WinRM client received an HTTP server error status (500), but the remote service did not include any other information about the cause of the failure. For more information,
see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentVersion 'Version 14.1 (Build 218.15)
I could only run Exbpa from a command prompt (obviously no access from Exchange Management Console)
This is the result of the Health Check Scan
Organization: First Organization
Default Global Address List Changed
The 'msExchQueryFilter' attribute of the default Global Address List 'Default Global Address List' has been changed. Default: '(Alias -ne $null -and (ObjectClass -eq 'user' -or ObjectClass -eq 'contact' -or ObjectClass -eq 'msExchSystemMailbox' -or ObjectClass
-eq 'msExchDynamicDistributionList' -or ObjectClass -eq 'group' -or ObjectClass - eq 'publicFolder'))'. Current: '((Alias -ne $null) -and (((ObjectClass -eq 'user') -or (ObjectClass -eq 'contact') -or (ObjectClass -eq 'msExchSystemMailbox') -or (ObjectClass
-eq 'msExchDynamicDistributionList') -or (ObjectClass -eq 'group') -or (ObjectClass -eq 'publicFolder'))))'.
Admin Group: Exchange Administrative Group (FYDIBOHF23SPDLT)
The default public folder database is remote
The default public folder database for mailbox database 'Mailbox Database' on server SERVER isn't local. Public folder database: CN=Public Folder Database 1529293969,CN=Databases,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=First
Organization,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=myd,DC=local.
Server: SERVER
Disk timeout changed
Disk timeout on server SERVER.myd.local is not set at the default of 10 seconds. This is normal if third-party storage software is installed. Current timeout value is 160 seconds.
Client RPC binding found
The 'Rpc_Binding_Order' is set on server SERVER.myd.local. It is possible that either the Exchange or Outlook client is installed on the server. Current registry value: ncalrpc,ncacn_ip_tcp.
One thing I've noticed from the start is that the error occurs when it is "searching" for the Exchange Server, it then goes on to name the server [server.myd.local] it knows it's there but cannot access it ?
Another thing I've noticed is that it always refers to the "remote server" this server is Windows SBS 2011, it's the Domain Controller, DHCP Server, DNS Server & Exchange Server all in the same box
I also noticed that the Health Check stated that "The default public folder database is remote"
Has this something to do with it ?
Regards
Peter

Suddenly started receiving a error message when checking for updates in app store nsurlerrordomain error - 1012 how to fix?

Suddenly started receiving a error message when checking for updates in app store nsurlerrordomain error - 1012 how to fix?

Thanks Linc I will sit tight for a while to see what happens before chasing up customer service. Cheers.

Script Error message when checking for updates....

Post Author: rcoleman
CA Forum: General Feedback
Getting a Script Error message when checking for updates or logging in to Crystal Reports. CR Developer v XI 11.0.0.1994.
Script Error
Line 481
Position 41
If g3()=True then main=True: Exit Fun
FYI to the Site Administrator

parkerpress wrote:
Any idea how to solve this if I haven't activated the 3GS service? I've been doing fine on wireless only.
Steve
Same problem here. After upgrading to iOS 4.2.1 a couple of weeks ago I'm getting the same error as the OP in the first post. I've never activated the 3G service.
I tried turning the cellular service on and checking for updates, pulled and replaced the SIM card, rebooted, nothing helps. I'm still getting the error when I click on the "Check for Update" button in iTunes (v10.1) when my iPad 64GB 3G is connected to my iMac. Any help would be appreciated. TIA.

Error message on searching for system updates and news feeds

I always get an error message when I attempt System Updates and when I attempt to subscribe to news feeds through the app that is pre-loaded on my phone. Any help is greatly appreciated.

Hello Mitch4815,
Thank you for reaching out for assistance with the New Feeds on your new Droid Bionic. I too own this device and I hope that you are as happy with yours as I am with mine. I've subscribed to the Reuter's Technology News on my Bionic so I can stay in the know on the latest and greatest rumors in the wireless world. Not only is it my job but I enjoy reading the speculation on the latest and upcoming devices. Needless to say I've had an experience that's similar to yours.
When I received a subscription error, I had to do a factory data reset on my new Droid Bionic in order to successfully subscribe to the News Feeds. Although I do recommend that you try this, let's save this step as a last resort. Please try to remove the battery while the device is powered on & re-insert then power the device on. Afterwards, verify that you have a good 3G/4G signal, anything more than 2 bars. If you are still experiencing access issues then the factory data reset would be the next step. Here is a link on how to perform a factory data reset on a Droid Bionic.
http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=46649
Of course you will have to reactivate your device after the factory reset. Prior to completing the reset I recommend verifying that your contacts are backed up on either backup assistant or on your Gmail account. Also, your pictures, videos, and music will be saved on the memory card so this info is not in danger. After you have completed the steps above, please reply to this message as your experience may help others.
Thank you for being the best part of Verizon Wireless.

Mail 2.1 and password error message when checking for incoming mail

I get a "password rejection" error message when Mail 2.1 tries to check for incoming messages and there are no messages to retrieve (I have an Earthlink account). I don't have any problems sending messages. When I send a test message to myself, Mail can retrieve it. When I check mail a few minutes later, I get the "password rejection" message from Earthlink. This also happens when I use MS Entourage (v10.1.6). I have been using Entourage for years and just recently started using Mail and this password problems seemed to appear recently (last few weeks).
Has anyone else experienced a similar problem? Since this happens in both Mail and Entourage, I don't know if it is Mac OS 10.4.10 or Earthlink. I tried Earthlink tech support and they were not much help.
Thanks,
Kenny

Problem resolved by itself. I think it was a problem with my ISP.

TS1717 i keep getting error r6025 when searching for music.i have downloaded what itunes suggest but no change

i keep getting error r6025 when searching store.i have downloaded the itunes suggestion but no change

I was getting -3231 and kept seeing references online about routers and firewalls and connectivity issues. I merely turned off my WiFi and went hardwired with ethernet and problem solved. Give it a try and see if it works for you.

Error message when saving for web and devices

I cannot save for web and devices for some reason. I get the error message shown in the screen shot below.
I'm using CS5 extended, version 12.1, 64 bit. My OS is windows 7.
It doesn't matter whether it's a JPG file or a PSD, I get the same error message, and I am unable to find a solution so far.

Hi,
See if this solution works (from this post):
regards,
steve
26. leonty16,
Jun 26, 2010 11:17 AM    in reply to turtle_
Report
FIXED .....
OK guys....I had this problem for the longest time & Whenever I tried to use "save to web" feature, I would get the same error.... after a lot of research & finally found a resolution.....
I wanted to take this opportunity to share the resolution why this feature was not working properly....
Here is the link where you will find what the problem was...
http://www.techsupportforum.com/microsoft-support/windows-vista-window s-7-support/235245-solved-error-1324-when-installing-applications.html
Basically, go to this registry location:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\U ser Shell Folders
& make sure that your current "my documents" sub folders are set to:
My Music       REG_EXPAND_SZ         %USERPROFILE%\Music My Pictures    REG_EXPAND_SZ         %USERPROFILE%\Pictures
My Videos      REG_EXPAND_SZ         %USERPROFILE%\Videos
Personal         REG_EXPAND_SZ         %USERPROFILE%\Documents
etc...etc...etc....
When I fixed my registry...this error went away & I had no problems with it anymore...please post this resolution on the website for others!

I am getting the following error message when trying to open a link to a folder

"This file is set to be launched by this PDF file. This is currently disallowed by your system administrator."
Currently I am using Reader 9, I was using Reader 7 earlier today and the link opened the folder with no problem. Nothing has been changed on the PDF file containing the link, nothing has been changed in the link, and if I go to another computer in the office that is still running Reader 7 the folder still opens. I also tried another computer in the office running Reader 9, the folder doesn't open, and I get the same error message.
Any ideas on how to fix this issue would be great. Thanks

Hi,
The issue that you are referring to maybe because of a fix provided by Adobe to prevent any external attacks. The following links may be of help to you:
http://www.adobe.com/support/security/bulletins/apsb10-15.html
http://news.softpedia.com/news/Adobe-Finally-Fixes-Launch-Bug-145757.shtml
To allow certain files of yours to be able to open external files and operate witout restriction, you can try and add the files to the Privileged locations section and the restrictions on the files will be lifted:
1. Open Adobe Reader 9.4.0 and goto Edit | Preferences
2. From the Left side pane, goto Security (Enhanced)
3. Click on Add File button and add the file for which you want the restrictions to be lifted. Click on OK to close the dialogs and relaunch Adobe Reader. This will enable you to open external attachments as well as allow JavaScripts to be executed from the PDF file mentioned.

IPhoto 6.0.6 throws up Error Message when used for the first time

After 7 months since having purchased my iMac I am using iPhoto for the first time. However, as soon as the iPhoto Library is created in the Pictures folder, about 30 seconds later, I get an Error Message stating "An error occurred while trying to save your photo library. Some recent changes may be lost. Make sure your hard disk has enough space and that iPhoto is able to access the iPhoto Library folder."
I have over 165GB on my hard disk. I have tried re-installing iLife 06 from the system disks that came in the box with my iMac. I have tried re-building the library by holding down the Option and Command keys when launching iPhoto. Nothing has helped so far.
I have tried calling the Apple support line, but after over an hour on the phone even he didnt know what the problem was.
Someone please help!
Gratefully yours,
DMEN

Dmen
The plist files simply record your user preferences for an application - your choice of default font, say, or the colour of the background, that sort of stuff. If this files is damaged or corrupted it can affect the app in all sorts of ways. When you trash it the app will create a new one when you next start it, and that will be the "factory defaults", but at least it will work.
To trash the fie:
Go to HD / Users / Your Name / Library / Preferences and find the com.apple.iphoto.plist fie, and put it in the trash.
Then start iPhoto.
Regards
TD

Error message when asked for search update on my d...

Lumia 525: an update is available for my device as i have checked it on the nokia check globally software update.... But when i check it on my device it says
"we are unable to check for updates (801881e1)"
help me with a solution

go to
http://www.windowsphone.com/en-IN/how-to/wp8/basics/solutions-to-update-issues
Nitin

REUSE SETTINGS supresses error messages when compiling an invalid object

Hello,
my test:
Create a table and a packaged procedure referencing the table. Then drop the table and recompile the package:
CREATE TABLE x (
    y     NUMBER
CREATE OR REPLACE PACKAGE y
AS
PROCEDURE z;
END y;
SHOW ERRORS
CREATE OR REPLACE PACKAGE BODY y
AS
PROCEDURE z
IS
v_count PLS_INTEGER;
BEGIN
SELECT COUNT(*)
INTO v_count
FROM x;
END z;
END y;
SHOW ERRORS
DROP TABLE x;
PROMPT 1.Compile package
ALTER PACKAGE y COMPILE;
SHOW ERRORS
PROMPT 2.Compile package body
ALTER PACKAGE y COMPILE BODY;
SHOW ERRORS
PROMPT 3.Compile package with "REUSE SETTINGS"
ALTER PACKAGE y COMPILE REUSE SETTINGS;
SHOW ERRORS
PROMPT 4.Compile package body with "REUSE SETTINGS"
ALTER PACKAGE y COMPILE BODY REUSE SETTINGS;
SHOW ERRORS
SELECT object_name
      ,object_type
FROM   user_objects
WHERE status = 'INVALID';
--DROP PACKAGE y;Partly unexpected output
Tabelle wurde erstellt.
Package wurde erstellt.
Keine Fehler.
Package Body wurde erstellt.
Keine Fehler.
Tabelle wurde gelöscht.
1.Compile package
Warnung: Paket wurde mit Kompilierungsfehlern geõndert.
Keine Fehler.
2.Compile package body
Warnung: Paketrumpf wurde mit Kompilierungsfehlern geõndert.
Fehler bei PACKAGE BODY Y:
LINE/COL ERROR
8/3      PL/SQL: SQL Statement ignored
10/8     PL/SQL: ORA-04044: procedure, function, package, or type is not
         allowed here
3.Compile package with "REUSE SETTINGS"
Warnung: Paket wurde mit Kompilierungsfehlern geõndert.
Keine Fehler.
4.Compile package body with "REUSE SETTINGS"
Warnung: Paketrumpf wurde mit Kompilierungsfehlern geõndert.
Keine Fehler.
OBJECT_NAME     OBJECT_TYPE
Y               PACKAGE BODY
1 Zeile wurde ausgewõhlt.It says
- Table created
- Package created
- Package body created
- Table dropped
- Package header compiled with errors (why?)
- Package body compiled with errors (shown error is expected)
- Package header compiled with errors (again why?)
- Package body compiled with errors (no errors shown)
So why is the header compiled with errors, when the object is valid.
And why is no error shown for COMPILE REUSE SETTINGS when there are errors for the body?
I use REUSE SETTINGS when recompiling invalid objects that were compiled for debug with
ALTER PACKAGE abc COMPILE PLSQL_DEBUG = TRUE REUSE SETTINGSRegards
Marcus
Version:
SQL*Plus: Release 10.2.0.1.0 - Production on Di Jan 27 12:45:20 2009
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options

Hi,
From SQL Reference Manual [REUSE SETTINGS|http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_1007.htm#BGBGEIGD]:
Specify REUSE SETTINGS to prevent Oracle from dropping and reacquiring compiler switch settings. With this clause, Oracle preserves the existing settings and uses them for the recompilation of any parameters for which values are not specified elsewhere in this statement.
For backward compatibility, Oracle Database sets the persistently stored value of the PLSQL_COMPILER_FLAGS initialization parameter to reflect the values of the PLSQL_CODE_TYPE and PLSQL_DEBUG parameters that result from this statement.
Regards,

Error message when syncing for the first time

Sorry if this has already been brought up...
When I first sync my iPhone 3G with my MacBook Pro I get the following message:
"Attempting to copy to the disk "Bob's iPhone" failed. This disk could not be read from or written to."
I have tried completely restoring my iPhone 3G and then re-syncing... still not working.
Anybody else getting this message?

Dmen
The plist files simply record your user preferences for an application - your choice of default font, say, or the colour of the background, that sort of stuff. If this files is damaged or corrupted it can affect the app in all sorts of ways. When you trash it the app will create a new one when you next start it, and that will be the "factory defaults", but at least it will work.
To trash the fie:
Go to HD / Users / Your Name / Library / Preferences and find the com.apple.iphoto.plist fie, and put it in the trash.
Then start iPhoto.
Regards
TD

Getting error message when click on the the link in Site Setting

I have 3 tear installation for SharePoint 2013 : DB Server, App Server & WFE server.
I am getting the below mentioned error when I go to Site Action -> Site Setting -> .......
Error being shown: System.InvalidOperationException: Could not find endpoint element with name 'http' and contract 'Microsoft.ReportingServices.ServiceContract.IReportServiceManagement' in the ServiceModel
client configuration section. This might be because no configuration file was found for your application, or because no endpoint element matching this name could be found in the client element.
at System.ServiceModel.Description.ConfigLoader.LoadChannelBehaviors(ServiceEndpoint serviceEndpoint, String configurationName)
at System.ServiceModel.ChannelFactory.InitializeEndpoint(String configurationName, EndpointAddress address, Configuration configuration)
at System.ServiceModel.Configuration.ConfigurationChannelFactory`1..ctor(String endpointConfigurationName, Configuration configuration, EndpointAddress remoteAddress)
at Microsoft.ReportingServices.SharePoint.SharedService.Client.ReportingWebServiceApplicationProxy.ChannelFactoryWrapper`1.CreateChannelFactory(String endpointConfigurationName)
at Microsoft.ReportingServices.SharePoint.SharedService.Client.ReportingWebServiceApplicationProxy.ChannelFactoryWrapper`1.GetChannel(Uri address)
at Microsoft.ReportingServices.SharePoint.SharedService.Client.ReportingWebServiceApplicationProxy.GetChannel[T](Uri endpointAddress, Int32& maxFaultSize)
at Microsoft.ReportingServices.SharePoint.SharedService.Client.ReportingWebServiceApplicationProxy.HandleExecuteOnChannel[T](String siteUrl, String xmlNamespace, Action`2 method, SPServiceLoadBalancerContext loadBalancerContext)
at Microsoft.ReportingServices.SharePoint.SharedService.Client.ReportingWebServiceApplicationProxy.ExecuteOnApplication[T](String operationName, String siteUrl, String xmlNamespace, Action`2 method)
at Microsoft.ReportingServices.SharePoint.SharedService.Client.ReportingWebServiceApplicationProxy.Invoke[T](SPServiceContext serviceContext, String operationName, String siteUrl, String xmlNamespace, Guid serviceInstanceId, Action`2 method)
at Microsoft.ReportingServices.SharePoint.SharedService.Client.ReportingWebServiceClient.Execute[TResult](String methodName, Func`2 action)
at Microsoft.ReportingServices.SharePoint.UI.BaseRSLayoutPage.ValidateReportServerConnection(SrvProxy rsProxy)
Please help me to resolve this issue.
Regards
G Goyal

Hi Jeyakanthan,
Thanks for your immediate reply.
Actually in outgoing payments there is no tax code selection available. Just we simply selecting the account on which we are making payment and amount( in payment means we are giving cheque details). When trying to add it is giving above said error. Kindly let me know if you have any solution.
Thanks,
Sravan Kumar Pothu

Error message when searching for an object link within EasyDMS

Similar Messages

Maybe you are looking for