Error message with pop-up of PDF

I often create links that will pop-up a PDF in a new window. I use good ole Open Popup 2 for this.
It works fine in Safari.  However with Explorer I get this message "Cannot use Adobe Reader to view PDF in your web browser. Reader will now exit"  Then I click OK and the PDF will show.  This message will show up on the first click only. 
Is there a way not to have this message?
thanks.
S. Houtzager

I had that trouble when I had Adobe Reader as well as the full Acrobat installed on the same machine.  I believe it was reader v8 and Acrobat v6 if that matters.
You may also find something in edit-->preferences about openning in a browser, but check for multiple PDF readers first.

Similar Messages

  • Blank error message with ? appears and PDF does not open in Browser (IE11) when clicking link to open pdf. PC - IE11 Acrobat 9.0

    Blank error message with ? appears and PDF does not open in Browser (IE11) when clicking link to open pdf. PC - IE11 Acrobat 9.0
    Cannot access in browser PDF files unless blank box is closed and then website address is clicked on again in browser address bar and page reloaded.
    Uninstalled Acrobat 9, reinstalled, still same problem.
    Help please!

    Yes I can it only happens in the browser..
    I reinstalled Windows on my machine and started over a couple of weeks ago.
    When my desktop started up I didn’t have Acrobat installed and clicked on a pdf file and the open with xxx dialogue box came open.
    I chose a different program as Acrobat wasn’t installed yet so it associated pdf files with another program.
    Later Installed Acrobat and couldn’t associate the pdf file with acrobat so I went into Folder Options and manually associated PDF files with Acrobat.
    Ever since then I get the error when something is downloaded and opened in the browser.
    Works fine everywhere else and when I cancel the blank error, highlight the web address and press enter to reload it works 90% of the time.
    Not sure what to do..

  • How to stop an error message that pops up every time I open Safari. It reads...Safari 5.1 (v6534.50) has not been tested with the plugin PithHelmet .As a precaution, it has not been loaded. Please contact the plugin developer.

    How do I stop this error message from popping up every time I start up Safari ?
    Error message reads...
    Safari 5.1 (v6534.50) has not been tested with the plugin Pithhelmet 3.0b6 (v 3006)
    As a precaution, it has not been loaded. Please contact the plugin developer.
    I have removed every trace of Pithhelmet, (via spotlight)
    Trashed the preferences for Safari, restarted computer to no avail.
    It just  keeps keepin on.
    Thanks

    In the past I was able to bypass the message by editing the Info.plist file and updating the MaxBundleVersion variable, but not so this time around. As of today the developer seems to indicate there's no immediate fix becuase of how Safari 5.1 handles multiprocess page rendering. Probably best to stay tuned to Mike's website for now.

  • My iphone 3g is in reset mode and i tunes will not reset. it pops an error message with no code. how can i get i tunes to rest my phone?

    my iphone 3g is in reset mode and i tunes will not reset. it pops an error message with no code. how can i get i tunes to rest my phone?

    No need to Double Post... It is considered impolite.
    https://discussions.apple.com/message/20652820#20652820

  • Pop up error message with yellow exclamation point disappears too fast cannot read it

    I am getting a pop up error message with a yellow triangle and yellow exclamation point in Safari but it immediately disappears after it appears. This happens so fast that I cannot read the error message. A java applet for my bank's website is not running properly and knowing what the error message is might help solve the problem. Help please.

    Since upgrading to Mac OS X Mountain Lion with the latest security updates, this annoying problem has disappeared.

  • Error Message With Adobe Acrobat Pro 9 Free Trial Version

    Hi,
    I know that this is a holiday weekend, but I need assistance with Adobe Acrobat 9 Free Trial Version.  I downloaded it, and then created a PDF file from MS Word 2007.  I tried to print, but the "save as" command popped up.  I had already saved it, so it already had a document name.  I tried resaving it and it would not do so.  Here's the error message that I received:
    "Adobe PDF cannot access the file because it is in use by another application process.  Verify that the file is not open by another application or process and try again.
    I did not have another app open.  Also, during this time, the software setup box kept popping up.  I kept selecting the 30 day trial version, but nothing would happen after I selected the button.  I am using the Vista OS on my computer.  I also have the Adobe Reader 9 which I have had for a while.
    I uninstalled and reinstalled the free version of Adobe Acrobat 9 and got the same result as described above.  If someone can help me with this, I would greatly appreciate it.  Thanks.
    Michelle Williams

    You have a problem. You cannot have Reader and Acrobat Pro on the same computer. It causes problems. Normally, I'd tell you to uninstall Reader and re-install Acrobat Pro, but doing so might make your trial fail and you cannot get two trials. For the moment when trying to create a pdf file, try printing to the the Adobe PDF virtual printer.

  • Error message when trying to export pdf to excel

    i keep getting an error message when trying to export a pdf to excel

    Hi ,
    Could you please elaborate more about the issue ?What exactly are you trying to perform and how are you trying to do the same?
    Are you using Adobe Reader or Adobe Acrobat to export PDF to excel?
    What software version are you using?
    Also ,could you please tell what is that error message and it would be wonderful if you could share the screenshot of the error message with us so that we can assist you accordingly .
    I would also like to know what OS do you work on ?
    Is it happening with all kinds of PDF you are trying to convert or any specific one?
    Please update me with above mentioned details so that we can assist you further .
    Regards
    Sukrit Dhingra

  • I am getting an error message with my snap scan ix500 that says the Evernote is not installed properly.  I have uninstalled/reinstalled evernote but it still doesn't work.  Anyone know where evernote stores their files on a Mac/

    I am getting an error message with my snap scan ix500 that says the Evernote is not installed properly when I try to transfer it.  I have uninstalled/reinstalled evernote and the scan snap softward but it still doesn't work.  Anyone know where evernote stores their files on a Mac?  Or had this problem.

    Are there any dialog boxes popping up behind your Yahoo screen?
    I have intermittent problems attaching files in Yahoo mail and this is usually the reason.  I'm also using an iMac (10.7.3) and this is likely the problem.
    It is generally a Yahoo issue rather than a Mac problem.

  • Raid 1 error message with ASC: 0x11, ASCQ: 0x0, FRU: 0xf

    Dear All,
    There is a error message with ASC: 0x11 (unrecovered read error), ASCQ: 0x0, FRU: 0xf
    And I reference the documentation at http://docs.oracle.com/cd/E19105-01/storedge.6320/817-5918-10/817-5918-10.pdf The error messages means:
    "The RAID controller firmware, during a normal read or volumes verification operation, corrects the bad sector on the drive by reconstructing the
    data (assuming a RAID 1+0 or RAID 5 configuration) and writing it back to the drive. The drive, in turn, writes the data to a spare sector.
    Ensure that the volume is scrubbed on a regular basis. If the volumes in the RAID device are configured as RAID 0,
    then the data is lost and drive replacement is required."
    But I am not understand if the harddisk in RAID 1. Is that the harddisk with problem will write the data to a spare sector but the other mirrored
    harddisk will not write to the spared block due to mirroring or they both write the data in the bad block to the spared block?
    If the data in the bad block moved to the spare sector in both mirrored harddisks.
    Is that the whole mirrored group will reuse the bad sector again after replacement?
    If the Mirror is built up by Veritas not the Solaris Volume Manager. Is there any difference?
    Thank You!
    Edited by: 960831 on 2012/9/23 下午 9:03
    Edited by: 960831 on 2012/9/23 下午 9:04

    It appears that SCSI disk #178, in an external array, has a bad data block
    and that the specific data block is #7564160. That data block
    additionally translates into sector #7560064 of LUN#1.
    Your computer system is finding it difficult to read whatever is in that part of the drive.
    Repair that disk by marking the block as unusable,
    or you can just replace the disk and rebuild the LUN.
    I've never had to do that, personally.
    That's what service contracts are for. The vendor does it for me.
    It seems that it is time for you to open a service case with the array vendor.

  • Error Message in Word  Convert To PDF Tab

    I am gettting an Error Message in Word  Convert To PDF Tab
    The pop up box comes up when I am in Word 2003 , it says "Unabkle To Find PDFresource files, you must be an adminstrator to install these files
    So I cannot create a PDF file when in Word 2003
    When I go to Acrobat  9.0 and try to create from a file , choose the word file, it says it is creating it- but nothing happens, its like it's not loading.
    I am on a PC

    Can you print to the Adobe PDF printer (I suspect you can not)? Are you logged in as the administrator? Can you find any of the job settings files? If the latter is the case, then you likely do not have permissions set to allow you to read the folder that has all the job settings. If you are not the administrator, you will have to get the administrator to find the folder (it is in one of the document and settings folders under Adobe for XP and under the Users (I think) on Win7) and grant you access.

  • "Sync encountered an error while syncing: Unknown error. SYnc will automatiall retry this action" - this error message keeps popping up

    "Sync encountered''' an error while syncing: Unknown error. Sync will automatically retry this action" - this error message keeps popping up whenever I am on my email accounts. I hit the "Sync Now" icon, but it comes back after a while.

    Note: I just tried deleting and re-creating my Sync account, reinstalling firefox, and deleting places.sqlite, with no success. And "Eooro" from the title is supposed to be "Error".

  • Clip for trailer won't load, regardless of the size the error message keeps popping up, "That clip is not long enough. Choose a longer clip for this part of the trailer."

    Clip for trailer won't load, regardless of the size the error message keeps popping up, "That clip is not long enough. Choose a longer clip for this part of the trailer."

    I got it out!
    Here is how.
    None of the Apple-suggested ways worked. However, before totally giving up I started Roxio Popcorn and pressed the big eject button on it. It came out effortlessly!
    So, I thought "Weird..."
    I put the CD back in and reproduced my original problem. I got it out just as easily using Roxio Popcorn Eject feature.
    So, I then thought "Maybe it is the disk?" There is nothing wrong with the disk as far as I can tell. It is perfectly round, has a smooth label-side surface. It is not even a label, it is a standard software install disk you buy in stores.
    I inserted a different disk. The mini mounted it, I browsed it, and then ejected it by dragging it to trash. Worked fine.
    I tried a few other disks.
    The drive seems to work fine.
    Maybe that CD is cursed, I dunno. I tried that disk in my PowerBook and it works fine there.
    Who knows ?
    I am still backing up my hard drive as I type this message in case I need to take it to the store.

  • I replaced the hard drive to a 30gig on my Ipod 4th gen. click wheel but it is still not recognized on my computer or in itunes......I get an error message with a folder and "!"....what can I do to fix??

    I replaced the hard drive to a 30gig on my Ipod 4th gen. click wheel but it is still not recognized on my computer or in itunes......I get an error message with a folder and "!"....what can I do to fix??

    Have you recharge the battery for at least 2 hours, or just leave it connected for 4 hours?
    (When you replaced the Hardisk, you should also replace the battery.)
    Some other iPod SSD sites, says that you may have to format the CF in FAT32, as Mac dont read NTFS drive so if Windows is the 1st PC that your CF is connected, it may be formatted to NTFS.
    You can try erasing the CF using Disk Utilty, so that Mac can recognise it. (but not Windows)
    Have a nice day!

  • Error message with hyperlink

    Hi Champs,
    I have requirement in which I need to display an error message in SRM Portal.The error message is maintained in the SAP SRM system and can be viewed through SE91.
    We are using SRM 4.0 Version.
    I need to display the below error message with a hyperlink to a particular site:
    Profit Center of plant and CO do not match, CO belogs to plant XXXX (item link)"
    Is it possible to have hyperlink with an error message.
    Thanks
    Regards,
    Nishant

    Hello
    It is no possible.
    But you may add hyperlink into documentation for message (SE91 -> Goto -> Documentation -> Long text).
    In this case hyperlink will be available after double click on error icon in left bottom corner.
    PS: and not duplicate posts.

  • Error message with offer to download the 4.1.B.0.587 update and note: "installation not possible" (because it's already there) cannot partition SD card

    Hi - Recently I put the latest update on my LT15i (4.1.B.0.587), after this I rooted the phone, and everything seemed okay. But since then I keep getting an error message with an offer to download the 4.1.B.0.587 update and the note: "installation not possible" (because it's already there). The news line on top shows a red exclamation mark all the time. It seems to me that it is due to this error that I cannot partition my SD card. Does anybody have an idea how to fix that? Thanks much in advance, and happy holidays - nerissa

    Moved thread to Android development.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

Maybe you are looking for

  • Error When Trying to scan acrobat 9 pro

    I have Acrobat 9 trial version, and a workcentre M20i and the Windows 7 I have a problem and is that when I trying to scann a paper Adobe send me an error message and then close. I installed the win 7 new driver for the scanner. Another tip is that I

  • How do i alphabetize a list of items in pages

    I need to alphabetize a list of item sin pages

  • Download to excel in background

    Hi I want to download data to Excel as a background job. Are there any FM's that can be used for the same. I can not use GUI_DOWNLOAD in this case. I am working on a CRM5.0 system. Any pointers on the same would be really helpful. Regards Avinash

  • Using focus stacker software and PSE10

    I am contemplating Zerene Stacker for macro photography focus stacking and wonder whether it presents any difficulties with Organiser. My understanding is that the work flow process would first use PSE Editor to produce JPG or TIFF files, then use ZE

  • Cisco IP Phone Agent problem

    Hi all, I am trying to setup the IPPA service for IP Phones using UCCX 5. I went through all the steps but when I tried to use the service i got the following error : "Cannot connect to the IP Phone Agent service". I past the service url in my browse