Error messages after running diagnostics

Question

I recently ran a diagnostics tool on my Mid-2010 17" MBP and it came up with the following 4 fails - any ideas?
[03/21/13 14:34:07] * TESTING FAILED [Elapsed time = 00:03:16]  *[03/21/13 14:39:47]           Right Side (test #4) - Turn Fan On Automatically
                    - System turns on fan motor and verifies fan motor can reach minimum/maximum values
[14:42:18]           ERROR -- 9 [Motor unable to stabilize between min and max limits] -- (0) TEST FAILED
[03/21/13 14:42:18]           Right Side (test #5) - Quick Fan motor Test
                    - System verifies that the fan motor is running to target speed
[14:42:34]           ERROR -- 7 [Fan motor is spinning slower than it should] -- (0) TEST FAILED
[03/21/13 14:52:14]           Hard Drive: SATA(0,0) (test #6) - Check SMART attributes
                    - Check the SMART attributes for a device.
[14:52:14]           ERROR -- 5 [No SMART attributes to check] -- TEST FAILED
[03/21/13 14:52:14]           Battery: Unconsumed Battery Capacity Test (test #31) - Unconsumed Battery Capacity Test
                    - Checks Battery has completed less cycles than design-cycle-count and maximum capacity is greater than 80% of designed capacity.
[14:52:14]           ERROR -- 6 [Capacity below minimum] -- TEST FAILED

Answer 1

Hi Mark,
I have a similar situation. Did the ASD test as well and came up with this:
Battery: Unconsumed Battery Capacity Test (test #31) - Unconsumed Battery Capacity Test
                    - Checks Battery has completed less cycles than design-cycle-count and maximum capacity is greater than 80% of designed capacity.
           ERROR -- 6 [Capacity below minimum] -- TEST FAILED
I was wondering how things are now?
Thanks in advance
M.