New project: Every clip -- even the very first clip -- needs to be rendered. Why? I have no effects applied.

I just started a new project. Every clip -- even the very first with NO effects - has to be rendered. Why? I have used this exact same clip in other videos and had no problem. I tried other simple (no effects) clips and they all do the same thing. Could it be something in my initial project settings?This is for a funeral and I do NOT have time to wait till Sunday when Adobe Chat Help opens up again. PLEASE HELP!

So, perhaps I'm missing something. Yes, dragging a clip to "new item" corrects the problem for that clip only, but trying to add another other clips to that same sequence results in new clips still needing to be rendered. Dragging additional clips to "new item" simply opens a new sequence which I don't need. I need all the corrected clips on the same sequence.
1) How can I get corrected clips on the same timeline?
2) How can I keep this from happening on future projects? I did not change anything from previous projects. I simply opened a new project & named it. I'm not sure where things went so wrong.
I know this sounds tacky, but I have gained about 2 days to complete this project since they have decided to cremate rather than bury. Still need answers quickly though. THANK YOU!

Similar Messages

When I go to create a new project in imovie using the iPhone 5, I am not able to see any of my video clips or photos that are saved on the device.

When I go to create a new project in imovie using the iPhone 5, I am not able to see any of my video clips or photos that are saved on the device.

When you move or copy the compound clips with their events into an external drive all the events should be there. Not clear on why you want to move them into a single event. You can drag and drop from one event to another.
Why are you using compound clips? You can simply copy the project from each machine with used media onto the external drive and that should do it.

I would like to use GarageBand to remaster downloaded music files that are in iTunes. Poorly mastered files keep clipping and damaging my speakers. When I try to use an iTunes file as a new project, it greys out the iTunes songs so I can't select them.

I would like to use GarageBand to remaster downloaded music files that are in iTunes. Poorly mastered files keep clipping and damaging my speakers. When I try to use an iTunes file as a new project, it greys out the iTunes songs so I can't select them. Any ideas?

As I said - look whether your original file is damaged or not. If not, I wouldn't change it and find out what in your system makes it sound like it's clipping.
Good sound file, with volume maxed out. No need to change anything.
The same song clipped - no chance to repair.

TS4006 Hello!! I bought an ipad as a gift for a friend and he lost it(or someome stole it) the very first day!!! He didnt even created icloud account. Can we still find it with help of find my iphone, eg ny using serial number????thanx.

Hello!! I bought an ipad as a gift for a friend and he lost it(or someome stole it) the very first day!!! He didnt even created icloud account. Can we still find it with help of find my iphone, eg ny using serial number????thanx.

Welcome to the Apple Community.
You can only locate your device when it is logged into iCloud and 'Find My Phone' is enabled, additionally the device will need to be switched on and connected to a wifi or cellular network.
Unfortunately, you cannot activate iCloud or 'Find My Phone' remotely.
If the device is wiped by you or another, you may not be able to locate the device (although some have reported they can)

Do I need a computer to use my ipad for the very first time?

I would like to know if I buy an iPad, shall I need to have a computer to start it for the very first time?
I mean do I need to do plug in or can I start without plug in?

The new iPad does not need to be activated using iTunes. You will need a WiFi connection to activate it, but not a computer.
If you are buying an iPad2, if it does not already have iOS 5 on it, then you would need a computer running the latest version of iTunes,

Can't restore latest Time Machine backup after drive replacement- only the very first.

My 13" Macbook Pro running 10.8.5 had a bad hard drive which had to be replaced. After the new drive was put in I tried to restore everything to the new drive with Time Machine but could only restore the first backup I ever did after getting the computer, which was over a year ago. I can drag and drop files but I would rather have all my preferences and bookmarks etc. How do I restore the latest backup which was only about a week ago? Thank you.

Not yet; I'm not sure if Migration Assistant is quite right. Since I posted the question I ran across this youtube video
http://www.youtube.com/watch?v=KYUem-QfYBs
which suggests that I need to start up from a bootable external disc in order to restore a Time Machine backup to the same computer that the backup came from when the drive is replaced. The video actually seems to describe my issue exactly. The only confusing thing is I don't know why I would have been able to restore the very first Time Machine backup if I need to boot from an external disc. More investigation needed.

My Media Browser in Garageband doesn't display anything except the very first song I have in this mac.

I have been always wanting to edit some songs and make a remix of it. However, the media browser in garageband in my macbook pro doesn't display any songs, except the very first song I added to my laptop. I have tried to do every suggestion from other forums (e.g. check the itunes library, etc) and none worked. One thing I realised is that I can still drag and drop the song directly from Finder to my Garageband timeline. Nevertheless, it annoys me whenever I open the media browser since this is not what my mac should do. I would be very grateful if someone could assist me with this matter.

Have you checked, if the search field at the bottom of the Media Browser is cleared? It should be set to "All", if you click the looking glass. Otherwise the list will be filtered.
And the drop-down menu should show "iTunes", if you want to see all songs.
If these simple measures do not help, try the fix for "oddball" problems and remove the User Preferences - see the FAQ:
http://www.bulletsandbones.com/GB/GBFAQ.html#oddballprobs
(Let the page FULLY load. The link to your answer is at the top of your screen)
Regards
Léonie

The Very FIrst iPod Classic - Having Issues

So, my brother's iPod keeled over and I told him I'd see what I can do. It's one of the very first iPod classics. They don't even sell these anymore. It's a 20GB metal design from 2004. I figure it's just fried, but I still wanna try. I don't think it died until recently, which is a shame. Even charging for a whole 48 hours, it wont turn on. I've tried resetting it numerous times.
Anyone wanna try and help? Any advice is appreciated.
NOTE: I do realise this is probably pointless since it's so old. I don't expect to fix it. It'd just be cool if I did.

It sounds like a third gen iPod. Does it have four buttons in a horizontal row with a circular wheel below? All of these buttons and the wheel touch sensitive? If so, it's a third gen. If it has a clickwheel and it's 2004, it's a fourth gen.
Sounds like the battery's gone. Just replace it yourself. It's like $30 with a DIY kit.

I own the very first ipod and can no longer be updated or synced any suggestions to get it back up and running, has just decided to stop 2015

I own the very first ipod and can no longer be updated or synced any suggestions to get it back up and running, has just decided to stop 2015

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
It could be that the battery has died

After download and installation of PS PE12 I have problems starting the programm. After selecting video and new project nothing happens, only the colorbar below new project is showing

New computer.
After download and installation of PS PE12
I have problems starting the programm, double clicking on the icon.
After selecting video and new project nothing happens, only the colorbar below new project is showing, nothing happens.
(expected was to activate the program and the sarting the PE12)
PSE12 runs fine
System:
WIN8.1 / i7 /16GB RAM

New computer.
After download and installation of PS PE12
I have problems starting the programm, double clicking on the icon.
After selecting video and new project nothing happens, only the colorbar below new project is showing, nothing happens.
(expected was to activate the program and the sarting the PE12)
PSE12 runs fine
System:
WIN8.1 / i7 /16GB RAM

Hey guys I need to delete photos from the very first IPad sold on the market, how I do it, when I bring the photos to be view I don't get the little garbage can to trash them. Help please!

Hey guys! How you delete photos from the very first IPad when you don't get the little garbage can on the screen.

The links below have instructions for deleting photos.
iOS and iPod: Syncing photos using iTunes
http://support.apple.com/kb/HT4236
iPad Tip: How to Delete Photos from Your iPad in the Photos App
http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
Another Way to Quickly Delete Photos from Your iPad (Mac Only)
http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
How to Delete Photos from iPad
http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
iPhoto for iOS (iPad): Delete photos from iPhoto
http://support.apple.com/kb/ph3137
How to: Batch Delete Photos on the iPad
http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
How to Delete Photos from iCloud’s Photo Stream
http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
The Fastest Way to Remove All the Photos from the iPad Camera Roll
http://ipadinsight.com/ipad-tips-tricks/the-fastest-way-to-remove-all-the-photos -from-the-ipad-camera-roll/
Delete Pictures from Your iPad
http://www.dummies.com/how-to/content/delete-pictures-from-your-ipad.html
 Cheers, Tom

How do I share a new project on imovie if the export option is greyed out and not an option?

how do I share a new project on imovie if the export option is greyed out and not an option?

nicoleking wrote:
... I heard that if you bring in your old iPhone, they will give you a new one with some kind of fee, but I don't know how that works.
https://discussions.apple.com/message/22920500

HT201250 which external hard drive should I choose/use as I am setting up Time Machine on my MacBook Pro 15 for the very first time?

Which external hard drive should I use/choose as I am setting up Time Machine on my MacBook Pro 15 for the very first time?

Any of these SATA HDDs that are at least the same size as your internal HDD (preferably larger capacity). In addition you will need an enclosure, preferably one with a Firewire as well as a USB connection.
http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
Ciao.

Need information on the very first certification exam - PL/SQL

Hi all,
I am about to enter the OCA track.
Need to appear for the very first exam.
Please let me know somethings like -
1. begineer's book, and pdf with any one, please pass it
to [email protected]
2. what is the name of the certification guide ?
3. Whts the exam code ?
any other information is welcome
Thanks in advance.

This is my understanding
to become a OCA - dev track one needs to pass
1Z0-001 or 007 and 147.
but the 001 has expired
so the 1Z007 + 1Z0-147 = OCA ( dev track )
and after that if i give 141, i will be OCP - dev track
is it ok ?
thanks

Hyperion System 9.3.1 reports taking longer time for the very first time

We are on Hyperion System 9.3.1. The Financial reports are taking longer time (like 2 to 3 minuter) for the very first time for each login. The subsequest reports are does work faster.
The behaviour is same for the Production and Development environments.
All the reporting services have given enough JVM heap size.
FYI, Reporting and Workspace runngin on the same server. Workspace/Reporting are clusted in two servers. HFM app is running on different server. HFM web is on different server. Shared Services is also on running on different server.
Any help would be greately appreciated.
Thanks.

The reason they run quicker the subsequent times, is because the data has already been cached in the system.
You could try the usual tricks to speed the report up:
- move items into POV
- have children and parent in the same row
- arrange dimensions in inverse outline order
- remove excessive formatting
- push report calculations back to the data source
We have found that using lots of dynamically calculated members also slows down reports, so try and limit the number of these.
Hope this helps. If not maybe give us an idea of how the report is created to see if other changes could be made.

New project: Every clip -- even the very first clip -- needs to be rendered. Why? I have no effects applied.

Similar Messages

Maybe you are looking for