Error messages for backend systems

Hello,
as we have several backend systems connected to our Portal (NW2004s
SP10) we wonder if there's no possibility to give a user a representative
message if a backend-system is unavailable? Right now we make backups
each weekend. So all backend systems are unavailable for a specific
period of time. If the portal backup is faster than the other backups
the users accesses the portal and encounter several error messages that
the there's a problem. Just a message about having a problem is not
enough. Isn't there any possibility to give a user a representative
message about the actual state of the backend system? Could the backend
iViews not check whether the specific system is availbale or not, and
respond the state? (Prefered with no further coding!)
Thanks and regards
Markus Armbruster

Hi,
Hope this thread helps: Notification of Server Maintenance in Portal
Cheers,
Sunil
PS: Reward points for helpful answers.

Similar Messages

  • "DD8x". Error message for loading process:Operating system error !

    Using the OLE command I receive the following error:
    Cannot load the file "File Name" with the loading process "DD8x". Error message for loading process:
    Operating system error <> !
    strCommand ="DATAFILEIMPORT('J:\ctf\GM\040119-2\dat7.dat','',0)"
    lsuccess = IDIACommand.CmdExecuteSync(strCommand)
    I get the same error with the "DataLoadHdFile" command.
    After the error happens, I cannot load any files in the directory until I
    reboot DIAdem.

    Hi punkmonkey,
    I'm curious why you compare the results of the "DataLoadHdFile" command with that of the "DataFileImport" command. The former is a time-honored DAT-file-specific command for only reading the header file contents-- NOT the data, and the latter is a brand new DIAdem 9.0 function for loading all sorts of data files-- TDM files included.
    If you want to load a DAT file using an OLE command, why don't you try the time-honored "DataLoad" command, which is specifically designed for loading DAT files? The "DataLoadHdFile" command is really only used to do selective loading (specific channels or rows) of part of a DAT file. Do you want to load selectively, or do you want to load all the channels from the DAT file?
    When you get the same error with
    the "DataLoadHdFile" command, are you executing that command also through OLE automation, or directly in DIAdem? What happens if you try both the "DataLoadHdFile" and the "DataFileImport" commands directly from DIAdem (no OLE)?
    Brad Turpin
    DIAdem Product Support Engineer
    National Instruments

  • Get error messages for those procedures in some system tables

    Hi expert,
    when I ran a procedure by schedule or on the front end. is there any approach to get error messages for those procedures in some system tables?
    Many Thanks,

    >
    when I ran a procedure by schedule or on the front end. is there any approach to get error messages for those procedures in some system tables?
    >
    No - there is no system log table.
    You need to create your own logging package and log table and modify your procedure code to call your own logging procedures to log into your own log table.
    The procedures in the log package would typically be defined with PRAGMA AUTONOMOUS_TRANSACTION so that the exceptions get logged even if your procedure performs a ROLLBACK.
    See AUTONOMOUS_TRANSACTION in the PL/SQL Language Reference
    http://docs.oracle.com/cd/B28359_01/appdev.111/b28370/autotransaction_pragma.htm
    Here is an Oracle-Base article that shows how to use the pragma to perform logging.
    http://www.oracle-base.com/articles/misc/autonomous-transactions.php

  • Error message "Live file system repair is not supported."

    System won't boot. Directed to Disk Utility to repair but get error message "Live file system repair is not supported."  Appreciate all help.
    Thanks.
    John

    I recently ran into a similar issue with my Time Machine backup disk. After about 6 days of no backups - I had swapped the disk for my photo library for a media project; I reattached the Time Machine disk and attempted a backup.
    Time Machine could not backup to the disk. Running Disk Utility and attempting to Repair the disk ended up returning the "Live file system repair is not supported" message.
    After much experimentaion with disk analysis softwares, I came to the realization that the issue might be that the USB disk dock wasn't connected directly to the MacBook Pro - it was daisy-chained through a USB Hub.
    Connecting the USB disk dock directly to the MBP and running Disk Utility appears to have resolved the issue. DU ran for about 6 hours and succesfully repaired the disk. Consequently, I have been able to use that Time Machine disk for subsequent backups.

  • For weeks I have been viewing a doggy day care via their web cam.  This weekend I upgraded to Lion and have been unable to view the center since.  I get an error message for java webcam class not found.  All of my software is up to date--suggestions?

    For weeks I have been viewing a doggy day care center via their web cam.  This weekend I upgraded to Lion and have been unable to view the center.  I get an error message for Java plug-in 1.6.0_29 ....webcam class not found.  Any suggestions on how to fix this?

    Sorry, don't know what else to suggest unless there's a URL to the problem stream that someone here can try. Otherwise we can't test it to try and determine what might be wrong.
    BTW, make sure they're testing it with a Mac, not with a Windows system. If they test only with Windows, what they say is or is not working doesn't mean much.
    Regards.

  • How to prevent error message for material description in MDG material detail screen, when user click on check action

    Dear Experts,
    I have a requirement for making material description as non mandetory in change request view of mdg material screen.
    I have done that using field usage in get data method of feeder classes, but still message is displaying.
    This message 'Material description is mandatory is displaying with check action only, but not with save or submit after i anhance field property as not mandetory.
    How to prevent error message for material description in MDG material detail screen, when user click on check action.
    Thanks
    Sukumar

    Hello Sukumar
    In IMG activity "Configure Properties of Change Request Step", you can completely deactivate the reuse area checks (but will then loose all other checks of the backend business logic as well).
    You can also set the error severity of the checks from Error to Warning (per CR type, not per check).
    Or you provide a default value for the material description, e.g. by implementing the BAdI USMD_RULE_SERVICE.
    Regards, Ingo Bruß

  • Error Message For BISystemUser: User not authenticated

    We have migrated from DEV to PROD env.(11.1.1.1 -> 11.1.1.3). Along problems with bipublisher - there are some strange thingths: we successfully loging using weblogic account into AdminConsole и Enterprise Manager, but in Answers we get an error: invalid username or password.
    nqserver.log:
    ...[ERROR:1] [] [] ... [tid: 1090] Error Message For BISystemUser: User not authenticated.
    ...[ERROR:1] [] [] ... [tid: 1090] [nQSError: 43126] Authentication failed: invalid user/password.
    In oracle support we found such issue (Doc ID 1308389.1):
    OBIEE 11g Error: "Unable to Sign in. invalid username or password was entered" After Changing Repository, Deleting BISystem User, Adding it Back (Doc ID 1308389.1)
    Applies to: Business Intelligence Server Enterprise Edition - Version: 11.1.1.3.0 [1905] to 11.1.1.5.0 [1308] - Release: 11g to 11g
    Symptoms: In OBIEE 11.1.1.3.0 using default authenticator, it is not possible to log in to OBIEE after changing repository. To troubleshoot, BIsystemuser was removed from global roles and added back again.
    Getting error: Unable to Sign in. invalid username or password was entered
    Changes: Changed repository, deleted BISystemuser, added the user back
    Cause: Several changes e.g changing rpd, deleting bisystem user, adding the user back etc. occurred in the environment and caused log in to OBIEE to stop working
    Solution: After a lot of troubleshooting e.g re-starting system in the correct order, refreshing GUIDs, re-start OBIEE with default SampleAppLite.rpd and web catalog, the error persists. The system was uninstalled and re-installed to avoid further corruption and configuration problems in the new installation. This resolved the problem
    Does we have to 'reinstall or make a lot of troubleshooting e.g re-starting system ' to solve this error?
    It seem to be funny for PROD environment. How we cam resolve this problem?

    Are you saying you upgraded both dev and prod from 11.1.1.1 to 11.1.1.3 or that you migrated a dev 11.1.1.1 to a prod 11.1.1.3? What did you migrate?
    At a rough guess the BISystemUser password is different in dev and prod (created by system on install) and in your 'migration' you've moved the dev credential across to prod.
    If that's the case you need to change the bisystemuser password to something known and update the credential store password.
    Another possibility might just be that you need to regenerate the GUIDs:
    http://download.oracle.com/docs/cd/E21764_01/bi.1111/e10543/privileges.htm#BIESC721

  • Error message for Confirmation

    Hi,
    We have a error message for back end service entry creation  in the Application monitor for Confirmations.
    There is no outbound or Inbound Idoc found with error.
    From this error message how can we found the PO Number or Confirmation number to check whether the confirmation is posted or not?
    Thannks
    Jimmi

    Hi,
    If you are doing confirmation in SRM , it is Extended classic scenario.
    error : There is no outbound or Inbound Idoc found with error
    You   have not created the IDoc  for the outbound Idoc for the confirmation to take to the backend.
    Create the Message type and partner profile in WE20
    Create Distribution model in SRM -T.code :BD 64
    we found the PO Number or Confirmation number to check whether the confirmation is posted or not
    Soln: Check in confirmation in display/process confirmation in SRM enter the  timeframe
    (or) check in R/3  in ME23N by putting the Purchase order no and check the goods receipt
    Regards
    Ganesh Kumar.G.

  • Unsupported black in use error message for laserjet p2055

    Receiving "unsupported black in use" error message for laserjet p2055.  I replace the cartridge with a new one and the same message appears.  Any suggestions how to resolve this issue?

    Hi,
    Does it become active if you go to System Preferences > Accounts and Click on the current Account Pic and attempt to take a Pic ? (you do not have to Set it as the Pic)
    Go to System Preferences > Accounts
    Click on Your Account (in the list on the Left)
    The Right hand side will now show some options.
    Clicking the current Pic will give you access to Edit Pic
    One of the Options then is to take a Snapshot.
    Take a Snap Shot but you do not have to "Set" the Pic.
    This process will invoke VDCAssistant.
    Explain further about the PRAM Reset please.
    You should shut down the computer (Rather than trying to catch the Restart)
    You should then Start the Computer holding down the AppleALT+PR keys and keep holding them until you hear three Start Up0 Bongs (Chimes)
    This deletes some settings such as System Preferences Settings for the Volume (Sound) and Date and Time that may need resetting afterwards. (Others may also be effected such as Screen Saver)
    On Spotlight.
    This does not look or report on certain Folders.
    At the Hard Drive Level this is Library and Syatem
    In your Home Folder (Little House icon) it will not look in your Library.
    com.ecam.iusbcam.plist and com.apple.ichat.plist
    Are in your Home Folder/Library/Preferences
    The Others are in the /Library at Hard Drive Level
    7:15 PM Wednesday; June 3, 2009
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

  • Estreamer generates error messages for "Failed to deserialize RUA Event"

    Estreamer service on 3D System generates the following error messages for user activity data:
    EventStreamer child(qradar.as.local):ConnectionHandler [ERROR] Failed to deserialize RUA Event 1004:1

    This is a known issue. This issue is fixed on software version 5.2.0.3. Upgrading your 3D System to latest software version will fix this issue.
    Note:  Once the 5.2.0.3 patch is installed, you may still receive the RUA Deserialize error if the Defense Center contains older unified files prior to the 5.2.0.3 patch.  Contact Technical Support for assistance in removing the older unified files.

  • Error Message for PR

    Dear all,
    I want to pop up the error message for the condition like if Open PR is available for the material and user once again indenting the same then user gets error message like Open PR available for material. Is it possible ?
    and,
    one more help If stock is available for the material even also user indenting the material then my requirement is how to stop this process. can i start any warning or error MSG for the same ? if yes then how ? please guide its urgent.
    Neha

    Better to implement MRP run process in your Organization.
    System will always check OPEN PRs,Open POs, Stock pending in system and will not allow to generate a PR if open qty available in system. Define minimum and Max qty in material master and activate MRP type.
    Please find complete business process and complete presentation and documentation for the same.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30f4d6c1-0808-2d10-2ea5-f9b2863cfed8?
    QuickLink=index&overridelayout=true
    Also implement PR Release strategy so that Site Incharge will always check requirement and then will approve for PO process.
    Its very helpful.
    Regards,
    Sandesh Sawant

  • Question!hi!i try to install mac os x lion from 10.6.8. the system apprear the error message, the recover system can not be created . how should I do?

    question!hi！i try to install mac os x lion from 10.6.8. the system apprear the error message, the recover system can not be created . how should I do?

    Peruse the hits from a google search for recovery system can't be created site:apple.com

  • How to write Error message for select options?

    Hi
    i have this select option statement
    SELECT-OPTIONS: s_fevor FOR afko-fevor.
    how to write error message for this?
    Regards
    Smitha

    Error messages are displayed for Select-options mostly on two conditions:
    1) You needs to check wether a value is entered or not its done by:
    a)
    Select-options:SELECT-OPTIONS: s_fevor FOR afko-fevor Obligatory.
       In this case error message is automatically throwed by system.
    b) You can do this in Selection Screen events.
    Ex:
    AT SELECTION-SCREEN./AT SELECTION-SCREEN ON S_FEVOR.
    IF S_FEVOR-LOW IS INITIAL.
    MESSAGE 'XXXXX' TYPE 'E'.
    ENDIF.
    2) You need to Validate the entered value:
    You can do this in Selection Screen events.
    Ex:
    AT SELECTION-SCREEN./AT SELECTION-SCREEN ON S_FEVOR.
    SELECT FEVOR
                 FROM AFKO
                 INTO AFKO-FEVOR
                 UP TO 1 ROWS
    ENDSELECT.        
    IF SY-SUBRC NE 0.
    MESSAGE 'XXXXX' TYPE 'E'.
    ENDIF.
    Regards,
    Gurpreet

  • How to create a error message for Deleted batch while creating a PO

    Hi ,
    Can any body tell me how to create error message for a deleted batch while creating a PO in ME21n,
    when a PO is created for a deleted batch at GI &GR lebel it is showing  a error message,
    but i want to show a error message while doing the PO creation.
    Thanks,
    Sachhi

    in badi  me_process_po_cust u can  put this message
    METHOD if_ex_me_process_po_cust~check.

  • How to give error message for the screen element text field when wrong i/p

    How to give error message for the screen element text field when wrong i/p
    when wrong input given
    eg. 
    I have a text box with SBOOK-CARRID
    so when user give wrong entry in text box i.e LG
    then I should give some error stating that the the input is invalid or not available ,
    now it showing the error of standard messages,
    i want manual message to be displayed when error comes.
    Thank you,
    Regards,
    Jagrut Bharatkumar Shukla

    Hi all,
    Thank you for your valuable reply,
    but the thing is that its a screen field,
    i.e text box not a selection screen
    i created in screen layout
    with name sbook-carrid
    now i want to get error message display if wrong i/p is given
    thank you.
    Regards,
    Jagrut bharatkumar Shukla,

Maybe you are looking for

  • Attachment of the email and PDF

    When transfer the outllook emails to PDF package, the attachment of the email will not tranfer to PDF, but still keep as word format, how to transfer these attachment also to PDF? When print the PDF package which tranfered from the emails, only the f

  • How can I Sync my iPad with a New pc

    How can I Sync my iPad with a New pc, when I lost my Old pc? My Old pc is Not Running anymore and it Looks like the Hard Disk was formated. So my iPad is logical connected with this pc and iTunes. Can I Sync my iPad with a New (empty iTunes) without

  • I'd buy more tunes if...

    There was a link between my song library and the wireless iTunes store like there is in the regular iTunes store. The store is too hard to browse to be useful to me, but if I were listening to a song and could easily link to more songs from that albu

  • Reading 'pdf' attachments to Outlook Express Email

    I can't read 'pdf' attachments to my Outlook Express mail. I get an Error Message "This message does not have a program associated with it" However, I can save the message to my computer 'My Documents' and it then opens fine with Adobe Reader. Adobe

  • Software inventory report and PC show different information

    Hi, The scenario is the following: SCCM 2012 R2. Clients with windows 8. The report "Software registered in Add Remove Programs on a specific computer" and "Programs and Features" show different information. Programs and features screenshot(ordered b