Error messages for HP printer drivers for printers I don't have

I keep getting error messages that say "HP Color LaserJet 3600 doesn't have a driver" and "HP LaserJet 4000 Series doesn't have a driver" but I don't have either of these HP models and I don't think I ever did. I tried to skip the message but it keeps coming back. Any ideas?  Do I completely unload all my HP software and reload it? 
Thanks!

Which computer? There is a label on the bottom.
Do I completely unload all my HP software and reload it? 
Which HP software? Give us the model numbers of HP devices in use.
When do the messages occur?
Please attach a picture.
-Jerry

Similar Messages

  • Drivers for printers I don't have

    I seem to be having a different problem than most. My printer works fine and has the current driver. Unfortunately I also have about a dozen drivers installed on my computer for printers I don't own and never have. I can manually uninstall all the drivers and they return the next time I plug in my printer. This wouldn't be an issue except at start up my computer spends an inordinate amount of time updating drivers for machines it never finds. Then, about once a day, I get one of those irritating warranty update notices for a printer I don't have. Each one has a different expiration date too.
    This question was solved.
    View Solution.

    David,
    Welcome to the HP Community Forum.
    That is just plain odd.
    I am inferring from what you say that you are indeed uninstalling the unwanted printer software programs you do not want from Programs and Features, yes?
    Some ideas...
    Create a Restore Point: 
    Restore Point XP  OR  Create a Restore Point – Win7  OR  Create a restore point Win8
    Next:
    If you have not already done so:
    Control Panel > set icon view > Programs and Features >
    Scroll down, find the Printer program(s) you do not want > Right-Click on the program > Uninstall
    Next:
    See the following:
    Pop-up Messages – HP UPdates
    Set it the Updates to Notify and then >> Switch off the Updates, that is, set the timeframe to "Never".
    Be sure you Restart / Reboot the system after the changes...
    ==========================================================================
    And,  if still no joy...clear the device manager and then reinstall the printer software.
    If you are using a Notebook:
    Close all your programs and shut down the computer
    Disconnect everything (little Unifier for the keyboard / external mouse can stay)
    Perform the Hard Reset for your notebook model
    Boot the computer and log in
    ELSE, if you are using a Desktop computer:
    Close all your programs and shut down the computer
    Disconnect USB drives, speakers, other unnecessary devices
    Unplug the computer for thirty seconds
    Connect the power (plug in)
    Reconnect devices
    Start / Boot the computer and log in
    Reminder:  This Hard Reset is just a device Reset.  The procedure does not wipe out your files nor does it destroy your Windows setup in any way.  This type of reset "clears the cobwebs". Depending on the root cause of the problem, this procedure can fix a variety of computer glitches.
    Next:
    You might reinstall the main printer software, that is, install the Full Feature Software for the printer that you DO have:
    Install Full Feature Software – Printer
    ===========================================================================
    Click the Kudos Thumbs-Up to show you appreciate the help.
    Click Accept as Solution when the Answer provides a Fix or Workaround!
    I am pleased to provide assistance on behalf of HP. I do not work for HP. 
    Kind Regards,
    Dragon-Fur

  • Getting error message: " filename couldn't be moved because you don't have permission to access foldername ." No matter where I try to save it.

    I am getting the above message no matter where I try to save my pages document. I've tried the original folder in Dropbox, a new folder in Dropbox, and my Desktop. I've also tried exporting it to PDF and printing it to PDF. I've checked the permissions and I have read&write permissions on the file and the folders.

    Back up all data before proceeding.
    This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
    Step 1
    If you have more than one user, and the one in question is not an administrator, then go to Step 2.
    Triple-click anywhere in the following line on this page to select it:
    sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
    Start up in Recovery mode. When the OS X Utilities screen appears, select
              Utilities ▹ Terminal
    from the menu bar. A Terminal window will open. In that window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window will open. You’re not going to reset a password.
    Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
               ▹ Restart
    from the menu bar.

  • Installer Dependencies Error - Asking for things I don't have

    Hello there,
    I was on the beta program for LabVIEW 2012 and DIAdem 2012 but I've since uninstalled the programs - I'm back to 2011 versions.  However, I now have the problem that when I try to build an installer from my executable it is asking for the 2012 distributions for things such as MAX (even though I've said not to install MAX).  I'm stuck because the beta program has now ended and it won't let me uninstall MAX to reinstall it from the 2011 distribuitions.
    Aagh! Can anyone help please?
    Thank you,
    Martin

    Martin,
    it seems that you changed the registry keys for those products by installing/uninstalling them.
    Obviously, those changes have been placed into you build specification. (Updated the project to 2012 for testing and then down converting it again???)
    I don't know if this is a suitable approach, but you can try the following:
    - Open the lvproj-file using a text editor (it is an XML file)
    - Search for the offending components. You will look for the entered "Product ID".
    - Open up Registry Editor (regedit) and search for that ID. You should get some hits. Check, if the product is the expected one (e.g. LV Runtime Engine 2012).
    - Search for the version you have available (e.g. LV Runtime Engine 2011). Copy the product key from it.
    - Replace the productID in the lvproj file with the product key of the correct verion.
    Several things i have to point out:
    a) DO NOT CHANGE THE REGISTRY!
    b) I haven't tested this, so it could have no effect or even worse, mess up your lvproj file. SO DO THIS ONLY WHEN YOU HAVE A BACK UP!
    c) I assume that more than one component is affected. So it will take a serious amount of time.
    d) It is possible, that you have not only to change the productID, but the productnames and productdependencies as well. I don't know what the best source of "correct strings" is for this...
    hope this helps,
    Norbert
    CEO: What exactly is stopping us from doing this?
    Expert: Geometry
    Marketing Manager: Just ignore it.

  • I have a Canon MX882 and more often than note get an error message saying the printer is not connected. I check the printer and the get the message that the access point is accessed. I have reloaded the software and it worked for awhile. Any ideas?

    I have a Canon MX882 printer and more often than note get an error message that says "Printer not Connected." When I check the printer itself, I get confirmation that the access point is connected. I tried reloading the software and that seemed to have solved the problem for awhile but I'm experiencing the same problem. Any ideas what is causing this?

    Did you delete all receipts with iDVD in the file name  with either a .PKG or .BOM extension that reside in the HD/Library/Receipts folder and from the /var/db/receipts/  folder before installing the new copy?  If not then do so and delete the new application also.
    Click to view full size
    Then install iPhoto from the disk it came on originally and apply all necessary updaters: Apple - Support - Downloads
    OT

  • Pop up error messages for failed custom validation

    I am using jdev-10.1.3.4
    My application is in ADF BC
    I am writing custom validation through managed bean, I want pop-up error message for this failed validation.
    My problem scenario is:
    I had some list box as "status"-when this status changes to failed then the other field namely "closed date" should become madantory and also date in closed date field can't be in future.I am able to have all this validation through managed bean and also able to use af:messages through which i am able to print error message on the top of the form, but i am not able to give pop up error message for this failed validation.
    I had gone thru jdev guide but there is nothing like what i am asking.
    it would be of great help if someone can give me some example also.
    thanks in advance.

    ADF has global setting where you can configure the way messages are shown to user:
    You can make this setting in adf-faces-config.xml
    The <client-validation> element controls how client-side converters and validators are run.
    Three values are supported:
    "INLINE": validation is shown inline in a page (the default)
    "ALERT": validation is shown in an Javascript alert
    "DISABLED": validation is only handled on the server
    IN your case, set it to 'ALERT'.

  • How to create a error message for Deleted batch while creating a PO

    Hi ,
    Can any body tell me how to create error message for a deleted batch while creating a PO in ME21n,
    when a PO is created for a deleted batch at GI &GR lebel it is showing  a error message,
    but i want to show a error message while doing the PO creation.
    Thanks,
    Sachhi

    in badi  me_process_po_cust u can  put this message
    METHOD if_ex_me_process_po_cust~check.

  • I can not dowload the new updated software for my Ipod touch 4G. When i do I get an error message that says Network connection has timed out. I have done the trouble shooting steps. Downloaded the latest version of Itunes, and checked network connection

    I can not dowload the new updated software for my Ipod touch 4G. When i do I get an error message that says Network connection has timed out. I have done the trouble shooting steps. Downloaded the latest version of Itunes, and checked network connection

    Disabling the computer's antivirus and firewall during the download and update usually resolves the timeout error.

  • For weeks I have been viewing a doggy day care via their web cam.  This weekend I upgraded to Lion and have been unable to view the center since.  I get an error message for java webcam class not found.  All of my software is up to date--suggestions?

    For weeks I have been viewing a doggy day care center via their web cam.  This weekend I upgraded to Lion and have been unable to view the center.  I get an error message for Java plug-in 1.6.0_29 ....webcam class not found.  Any suggestions on how to fix this?

    Sorry, don't know what else to suggest unless there's a URL to the problem stream that someone here can try. Otherwise we can't test it to try and determine what might be wrong.
    BTW, make sure they're testing it with a Mac, not with a Windows system. If they test only with Windows, what they say is or is not working doesn't mean much.
    Regards.

  • How to prevent error message for material description in MDG material detail screen, when user click on check action

    Dear Experts,
    I have a requirement for making material description as non mandetory in change request view of mdg material screen.
    I have done that using field usage in get data method of feeder classes, but still message is displaying.
    This message 'Material description is mandatory is displaying with check action only, but not with save or submit after i anhance field property as not mandetory.
    How to prevent error message for material description in MDG material detail screen, when user click on check action.
    Thanks
    Sukumar

    Hello Sukumar
    In IMG activity "Configure Properties of Change Request Step", you can completely deactivate the reuse area checks (but will then loose all other checks of the backend business logic as well).
    You can also set the error severity of the checks from Error to Warning (per CR type, not per check).
    Or you provide a default value for the material description, e.g. by implementing the BAdI USMD_RULE_SERVICE.
    Regards, Ingo Bruß

  • I purchased a magazine using the Zinio app which I'd recently downloaded on to a recently purchased iPad. I received an error message at the time (can't recall the details) but have since been invoiced for the $8.99. How can I get the Magazine I purchased

    I purchased a magazine using the Zinio app which I'd recently downloaded on to a recently purchased iPad. I received an error message at the time (can't recall the details) but have since been invoiced for the $8.99. How can I get the Magazine I purchased?

    FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
    For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
    Phone: 800-275-2273 How to reach a live person: Press 0 four times
    Hours of Operation: Mon-Fri: 9am-5pm ET
    Email: [email protected]
    How to report an issue with Your iTunes Store purchase
    http://support.apple.com/kb/HT1933
    How to Get a Refund from the App Store
    http://gizmodo.com/5886683/how-to-get-a-refund-from-the-app-store
    Canceling a Digital Subscription
    http://gadgetwise.blogs.nytimes.com/2011/10/14/qa-canceling-a-digital-subscripti on/
     Cheers, Tom

  • How to give error message for the screen element text field when wrong i/p

    How to give error message for the screen element text field when wrong i/p
    when wrong input given
    eg. 
    I have a text box with SBOOK-CARRID
    so when user give wrong entry in text box i.e LG
    then I should give some error stating that the the input is invalid or not available ,
    now it showing the error of standard messages,
    i want manual message to be displayed when error comes.
    Thank you,
    Regards,
    Jagrut Bharatkumar Shukla

    Hi all,
    Thank you for your valuable reply,
    but the thing is that its a screen field,
    i.e text box not a selection screen
    i created in screen layout
    with name sbook-carrid
    now i want to get error message display if wrong i/p is given
    thank you.
    Regards,
    Jagrut bharatkumar Shukla,

  • Error Message For BISystemUser: User not authenticated

    We have migrated from DEV to PROD env.(11.1.1.1 -> 11.1.1.3). Along problems with bipublisher - there are some strange thingths: we successfully loging using weblogic account into AdminConsole и Enterprise Manager, but in Answers we get an error: invalid username or password.
    nqserver.log:
    ...[ERROR:1] [] [] ... [tid: 1090] Error Message For BISystemUser: User not authenticated.
    ...[ERROR:1] [] [] ... [tid: 1090] [nQSError: 43126] Authentication failed: invalid user/password.
    In oracle support we found such issue (Doc ID 1308389.1):
    OBIEE 11g Error: "Unable to Sign in. invalid username or password was entered" After Changing Repository, Deleting BISystem User, Adding it Back (Doc ID 1308389.1)
    Applies to: Business Intelligence Server Enterprise Edition - Version: 11.1.1.3.0 [1905] to 11.1.1.5.0 [1308] - Release: 11g to 11g
    Symptoms: In OBIEE 11.1.1.3.0 using default authenticator, it is not possible to log in to OBIEE after changing repository. To troubleshoot, BIsystemuser was removed from global roles and added back again.
    Getting error: Unable to Sign in. invalid username or password was entered
    Changes: Changed repository, deleted BISystemuser, added the user back
    Cause: Several changes e.g changing rpd, deleting bisystem user, adding the user back etc. occurred in the environment and caused log in to OBIEE to stop working
    Solution: After a lot of troubleshooting e.g re-starting system in the correct order, refreshing GUIDs, re-start OBIEE with default SampleAppLite.rpd and web catalog, the error persists. The system was uninstalled and re-installed to avoid further corruption and configuration problems in the new installation. This resolved the problem
    Does we have to 'reinstall or make a lot of troubleshooting e.g re-starting system ' to solve this error?
    It seem to be funny for PROD environment. How we cam resolve this problem?

    Are you saying you upgraded both dev and prod from 11.1.1.1 to 11.1.1.3 or that you migrated a dev 11.1.1.1 to a prod 11.1.1.3? What did you migrate?
    At a rough guess the BISystemUser password is different in dev and prod (created by system on install) and in your 'migration' you've moved the dev credential across to prod.
    If that's the case you need to change the bisystemuser password to something known and update the credential store password.
    Another possibility might just be that you need to regenerate the GUIDs:
    http://download.oracle.com/docs/cd/E21764_01/bi.1111/e10543/privileges.htm#BIESC721

  • Error message for Adobe AIR 2.0.3 while trying to run Dreamweaver CS5

    imac 2.66 Ghz, Intel Core i5, OS 10.6.4.
    Error message for Adobe AIR 2.0.3 while trying to run Dreamweaver CS5:
    Adobe Air
    the installation of this app is damaged. Try re-installing or contacting the publisher for assistance.
    Tried several times to uninstall and reinstall from fresh download to no avail.
    I'm finding the instructions in the trouble shooting area a tad esoteric.
    Will there be an update to the installer released soon?

    Hi,
    I'm assuming your having troubles installing the 2.0.3 runtime?  If so, can you please try the instructions in this post?
    Thanks,
    Chris

  • Error message for  Unable to connect (BIB-16633)

    Dear All
    I use Oracle Jdeveloper10g (win32), Oracle database10g or 9i (win32 ver). But Failure to connect to OLAP service.
    Can anyone give me what is the error message for BIB-16633.
    Would be really grateful if you could give me a solution as soon as possible.
    Thanks & Regards,
    Mr.Tsang. Hong Kong

    For database versions you need to have at least 9206 for 9i and 10.1.0.4 for 10g. This requires you to apply the 9206 patchset to 9i and the 10.1.0.4 patchset to the 10g base install.
    Please note there are a lot of steps invloved in the patching process and you must make sure you have completed all the steps before creating your OLAP schema. Most problems occur because the patching process is incomplete and the OLAP option is in an invalid state.
    You can check the state of the OLAP option using the following commands in SQLPlus:
    column comp_name format a35
    SELECT comp_name, status, substr(version,1,10) as version
    from dba_server_registry order by modified;
    Once the OLAP option is in a valid state, then you must ensure the OLAPSYS account is unlocked. To test the OLAP environment you can install the BI10G sample schema which will create a new user account called CS_OLAP which contains an Analytic Workspace.
    Hope this helps
    Business Intelligence Beans Product Management Team
    Oracle Corporation

Maybe you are looking for