Error mingling data

I've read a few topics about this error mainly being reported while syncing iCal but mine seems to be a much bigger problem. Contacts [over 100 I refuse to insert manually, this is one of the reasons I got the phone. It SHOULD be seemless in this regard] , mail accounts, and iCal will NOT sync over. I just purchased it [the phone] last night and I have so far:
-updated to newest iTunes
-repaired permissions
-completely restored/updated iPhone
-selected "erase/replace data on phone"
-have attempted syncing each by themselves [only contacts or only mail] with and without selecting "erase data on phone"
-erasing the "sync history" or whatever that was in iCal prefs.
-so far the only thing that will sync are pictures and music [no movies to sync]
Funny thing is, I don't even have a mail account or any data [other than a few meetings/appointments] in iCal setup in my computer. Though I know I WILL set up a Yahoo/Gmail account in the future because my current email accounts don't have POP access. Even though it might seem pointless, syncing no data should NOT produce an error like this because if it does, it might just blow up if I try to actually sync an account to it.
I have searched the forum for this info but so far I only see people having this error for iCal. Any help would be greatly appreciated. Thank you.
Edit: I should note that not selecting "erase data on phone" does not produce any errors but nothing is synced over.
Message was edited by: Mikey U.

bit of ical data, just a couple of appointments. The error always says "error mingling data with the iphone".
Nothing gets synched, just have the one contact I have inserted manually into my iphone since I've had it. Ohhhhh about 120 contacts roughly.
And the strange url? I just prefer using brackets instead of parenthesis and for whatever reason this forum sees brackets as meaning there has to be some code in it, even though there is no legit html or bb code in between. Just text between brackets. So i'll fix that up.
edit: well it seems I can't edit the original post so that ridiculous code is there to stay. Oh Apple, you try to make things simple but it ends up frustrating most people. (a touch sensitive multi-button mouse, I get a call every single day about people not understanding the concept of using the right click. but I digress)
After visiting the local "genius" bar they have concluded that it was Limewire that caused damage to the disk and most likely DiskWarrior will sort my issues out. Personally I think the Limewire excuse is ridiculous since I actually have never used the version on my laptop after I initially downloaded it. I figured I would keep that contained on my desktop though have never bothered to delete it from the laptop. I have ran DW recently though I suppose another pass is worth it (never thought of it) so after I do that I will let you guys know though nobody cares.
Message was edited by: Mikey U.
Message was edited by: Mikey U.

Similar Messages

  • Contact Syncing Problems "Error mingling data"

    Whenever I try and sync contacts (it worked the first time, hasn't ever since) i get an error that says, "Itunes cannot sync the contents because an error occurred while mingling data"
    I am using address book. Any ideas? Thank you in advance!

    OK.....after i posted my reply I decided to try
    everything again. And somehow...it worked.
    With my iPhone already connected, i clicked on the
    "INFO" tab in iTunes.
    In "CALENDARS" I clicked "SELECTED CALENDARS" and
    checked each of my calendars listed (only three)
    I also checked "DO NOT SYNC EVENTS OLDER
    THAN".....and I entered "10 DAYS" because I saw it in
    some other post
    **I scrolled to the bottom to the "ADVANCED" section
    and clicked "REPLACE INFORMATION ON THIS iPHONE" and
    clicked "CALENDARS"
    I hit "APPLY" in the bottom right and......I finally
    did not receive the error message!
    Hope this helps y'all.
    iMac 2.16 GHz Intel
    Core Duo   Mac OS X (10.4.10)  
    It did, however my music, videos, etc. were wiped out in the process. I am not worried though.
    4GB iPhone, Titanium PBG4 1GHz DVI, 1024 RAM, eMate 300, MessagePad 2000ua, Motorola Marco   Mac OS X (10.4.10)  

  • Error ocurred while mingling data

    iTunes can't sync my contacts because of this error while mingling data. Any suggestions? I tried checking all the options in the advanced section "Replace Information on This iPhone" and syncing again with no luck.

    Open isync in the applications folder.
    Open the isync preferences and reset sync history.
    Then choose "Replace Information on This iPhone" in the advanced section of the info tab.
    Now try syncing the iphone.
    Hope this helps.

  • Cannot sync calendars... error occurred while mingling data???

    Error message after iPhone update:
    iTunes could not sync calendars to the iPhone...... 's iPhone because an error occurred while mingling data.
    A bug?
    I have a stock iPhone.
    What gives?

    Carl Jonsson wrote:
    Error message after iPhone update:
    iTunes could not sync calendars to the iPhone...... 's iPhone because an error occurred while mingling data.
    A bug?
    I have a stock iPhone.
    What gives?
    There was recently a tech article about this but I can't seem to find it. I remember it because of the odd use of the word mingling. The problem seemed to be triggered by Calendar events that have a blank title field. You may have accidently created one.

  • Errors Syncronizing Data .. "... mingling data"

    Could not enter a "Calendar Event" in Outlook - Entered it on phone and tried to sync via iTunes. Received the following error:
    "iTunes could sync calendars to the iPhone "phone name" because an error occurred while mingling data.
    Anybody have any solutions for this ?

    Hi,
    We have installed MSA 4.0 (SP12 ). we have also checked QMT config in Mobile sales bin folder. The test connection is sucessfull.( see the below message). we stil have problems in Data transfer when we run connstrans. Please help .
    <b>" NewQmtCnfg Version 2.0 for Windows 2000 - revision  4003
    Assume running on Client
    1. Try to access Communication Station 'MTV01sdCR02', please wait...
    ... OK
       Try QmtServer component initialize check, please wait...
    ...OK: QmtServer initialize call returns successfully
    2. Try to access CRM Server (Destination '<DEFAULT>'), please wait...
    ...OK: CRM Server call returns successfully</b>
    regards
    Kamalesh KV

  • While importing a request error message' Check-sum error in data file'

    Hi Friends
    I have a problem.
    We are trying to inport a request after putting the files in cofile and data file folders( 4.6C System).While doing so an error message is seen in the log " Check-sum error in data file after XXXX bytes".
    Can some one help me with this?
    Thanks
    Regards
    Ankur

    Hi Ankur,
    It is sure your file is corrupted or not present.
    Check in cofiles and data directory under /usr/sap/trans your transport request number.
    Best Wishes.
    Kumar

  • UWL CATS time approval error "No data exists that needs to be approved"

    Hi all,
    We approve CATS working time through SAP portal UWL. The user can see the workitem in her UWL inbox, but got an error u201CNo data exists that needs to be approvedu201D when he tried to execute the workitem. But the user is able to execute the workitem using Business workplace in ECC. We are using the standard UWL application.
    This happens only to CATS time entries for certain type of employees (for example, the employees who do not report directly to the approver).
    SAP Portal 7.0
    SAP MSS 600 SP19
    SAP UWLJWF 7.00 sp23
    SAP ECC 6.0
    Here is what I have found from my trouble-shooting. When I test (preview) the UWL iView, it seems to be working fine. But when I call up the iView from the portal MSS role, I got the error message u201CNo data exists that needs to be approved.u201D
    Please let me know if you need more information.
    Thank you,
    Qi

    I have found that the workitem ID is not passed to the CATS approval web dynpro program. Here is what is in the Item Type configuration XML. Is there anything missing?
    <!-- Work items for CATS -->
        <ItemType name="uwl.task.webflow.TS31000007" connector="WebFlowConnector" defaultView="com.sap.pct.erp.mss.OpenTasksTimeApp" defaultAction="launchWebDynPro" executionMode="default">
          <ItemTypeCriteria externalType="TS31000007" connector="WebFlowConnector"/>
          <Actions>
            <Action name="launchWebDynPro" groupAction="" handler="SAPWebDynproLauncher" returnToDetailViewAllowed="yes" launchInNewWindow="yes" launchNewWindowFeatures="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no">
              <Properties>
                <Property name="WebDynproApplication" value="CatManagerApprove"/>
                <Property name="WebDynproDeployableObject" value="sap.com/msscatapproval"/>
                <Property name="newWindowFeatures" value="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no"/>
                <Property name="openInNewWindow" value="true"/>
                <Property name="display_order_priority" value="5"/>
              </Properties>
              <Descriptions default=""/>
            </Action>
          </Actions>
        </ItemType>
        <ItemType name="uwl.forwardedtask.webflow.TS31000007" connector="WebFlowConnector" defaultView="com.sap.pct.erp.mss.ForwardedTimeApp" defaultAction="viewDetail"/>
        <ItemType name="uwl.futuretask.webflow.TS31000007" connector="WebFlowConnector" defaultView="com.sap.pct.erp.mss.FutureTaskTimeApp" defaultAction="viewDetail"/>
        <ItemType name="uwl.completedtask.webflow.TS31000007" connector="WebFlowConnector" defaultView="com.sap.pct.erp.mss.CompletedTimeApp" defaultAction="viewDetail"/>
    Thanks,
    Qi

  • Error Message: Data from Business Add-In ME_PROCESS_PO_CUST not transferred

    Hi All,
    I have done a BADI implementation for ME_PROCESS_PO_CUST and when I try to convert a PR to PO using ME59N in ECC u2013 AFS System I am getting below error message.
    Data from Business Add-In ME_PROCESS_PO_CUST not transferred.
    I am trying to populate certain PO fields ( ekko and ekpo ) from PR fields. But the above error occurs when I update the Ex Factory Date manual that is EKPO-J_3AEXFCM.
    I am updating this in the method PROCESS_ITEM and what I found while debugging is in the class CL_PO_HEADER_HANDLE_MM, in the implementation of IF_FLUSH_TRANSPORT_MM~START, the contents of field u2018my_iteration_countu2019 keeps increasing and becomes 10 and raises this error.
    I read few of the related questions raised by others in this forum and understood that this can happen if I try to change the field that is disabled ( greyed) in ME22N. But this field that I am talking about is enabled.
    I also tried to move my code of populating the field EKPO-J_3AEXFCM from the PROCESS_ITEM to the enhancement point just above the user exit EXIT_SAPMMO6E_018 but still it doesnu2019t resolve the error.
    (We donu2019t want to use User Exit and hence we are trying with BADIs or enhancement point.)
    Can anyone please help me with this. I also found an OSS note 1334046 but not sure if that can resolve my issue.
    Thanks in advance.
    Ameesha.

    Hi Ameesha,
    i think u need to implement the BADI ME_PROCESS_PO_CUST in SPRO settings.
    SPRO>Purchasing>Business Add-in Purchasing-->BAdI: Enhance Processing of Enjoy Purchase Order
    try this once.
    All check this link.
    [Error Message: Data from Business Add-In ME_PROCESS_PO_CUST not transferred;
    Hope it helps.
    Regards,
    Raj

  • Error reading data from CLOB column into VARCHAR2 variable

    Hi all,
    Am hitting an issue retrieving data > 8K (minus 1) stored in a CLOB column into a VARCHAR2 variable in PL/SQL...
    The "problem to be solved" here is storing DDL, in this case a "CREATE VIEW" statement, that is longer than 8K for later retrieval (and execution) using dynamic SQL. Given that the EXECUTE IMMEDIATE statement can take a VARCHAR2 variable (up to 32K(-1)), this should suffice for our needs, however, it seems that somewhere in the process of converting this VARCHAR2 text to a CLOB for storage, and then retrieving the CLOB and attempting to put it back into a VARCHAR2 variable, it is throwing a standard ORA-06502 exception ("PL/SQL: numeric or value error"). Consider the following code:
    set serveroutput on
    drop table test1;
    create table test1(col1 CLOB);
    declare
    cursor c1 is select col1 from test1;
    myvar VARCHAR2(32000);
    begin
    myvar := '';
    for i in 1..8192 loop
    myvar := myvar || 'a';
    end loop;
    INSERT INTO test1 (col1) VALUES (myvar);
    for arec in c1 loop
    begin
    myvar := arec.col1;
    dbms_output.put_line('Read data of length ' || length(myvar));
    exception when others then
    dbms_output.put_line('Error reading data: ' || sqlerrm);
    end;
    end loop;
    end;
    If you change the loop upper bound to 8191, all works fine. I'm guessing this might have something to do with the database character set -- we've recently converted our databases over to UTF-8, for Internationalizion support, and that seems to have changed underlying assumptions regarding character processing...?
    As far as the dynamic SQL issue goes, we can probably use the DBMS_SQL interface instead, with it's EXECUTE procedure that takes a PL/SQL array of varchar2(32K) - the only issue there is reading the data from the CLOB column, and then breaking that data into an array but that doesn't seem insurmountable. But this same basic issue (when a 9K text block, let's say, turns into a >32K block after being CLOBberred) seems to comes up in other text-processing situations also, so any ideas for how to resolve would be much appreciated.
    Thanks for any tips/hints/ideas...
    Jim

    For those curious about this, here's the word from Oracle support (courtesy of Metalinks):
    RESEARCH
    ========
    Test the issue for different DB version and different characterset.
    --Testing the following PL/SQL blocks by using direct assignment method(myvar := arec.col1;) on
    different database version and different characterset.
    SQL>create table test1(col1 CLOB);
    --Inserting four CLOB data into test1.
    declare
    myvar VARCHAR2(32767);
    begin
    myvar := RPAD('a',4000);
    INSERT INTO test1 (col1) VALUES (myvar);
    myvar := RPAD('a',8191);
    INSERT INTO test1 (col1) VALUES (myvar);
    myvar := RPAD('b',8192);
    INSERT INTO test1 (col1) VALUES (myvar);
    myvar := RPAD('c',32767);
    INSERT INTO test1 (col1) VALUES (myvar);
    commit;
    end;
    --Testing the direct assignment method.
    declare
    cursor c1 is select col1, length(col1) len1 from test1;
    myvar VARCHAR2(32767);
    begin
    for arec in c1 loop
    myvar := arec.col1;
    --DBMS_LOB.READ(arec.col1, arec.len1, 1, myvar);
    dbms_output.put_line('Read data of length: ' || length(myvar));
    end loop;
    end;
    The following are the summary of the test results:
    ===================================
    1. If the database characterset is WE8ISO8859P1, then the above direct assignment
    method(myvar := arec.col1;) works for database version 9i/10g/11g without any
    errors.
    2. If the database characterset is UTF8 or AL32UTF8, then the above direct assignment method(myvar := arec.col1;) will generate the "ORA-06502:
    PL/SQL: numeric or value error" when the length of the CLOB data is greater
    than 8191(=8K-1). The same error can be reproduced across all database versions
    9i/10g/11g.
    3. Using DBMS_LOB.READ(arec.col1, arec.len1, 1, myvar) method to read CLOB data into a VARCHAR2 variable works for both WE8ISO8859P1 and UTF8
    characterset and for all database versions.
    So - it seems as I'd surmised, UTF8 changes the way VARCHAR2 and CLOB data is handled. Not too surprising, I suppose - may you all be lucky enough to be able to stay away from this sort of issue. But - the DBMS_LOB.READ workaround is certainly sufficient for the text processing situations we find ourselves in currently.
    Cheers,
    Jim C.

  • Error converting data type nvarchar to numeric 'witholding tax' (OWHT)

    Hi Guys.
    After I have upgraded my clients 2007 PL 30 database to 8.81 PL05, and running a repair to fix inconsistincies, I am receiveing some error when opening any sales documents.
    It takes place when I open a sales document, or browse previous docs. When browsing previous docs, it onlly happens on some of them.
    I also receive a different error when viewing sales orders: Error converting data type nvarchar to numeric (CRD2).
    Any ideas how to fix it?
    It does not limit me from processing and using the rest of the functionality. All calculations with queries in the docs are still working.
    Thanks.

    Hi,
    Please check Note No. : 1402855 and see if the same applied to the issue mentioned by you.
    Kind Regards,
    Jitin
    SAP Business One Forum Team

  • Error on Data Flow Task MSSQL 2012 Clustered "Description: The version of Lookup is not compatible with this version of the DataFlow. "

    We have an SSIS package that runs on clustered MSSQL 2012 Enterprise Nodes that is failing.  We use a job to executer the package.
    Environmental information:
    Product - Microsoft SQL Server Enterprise: Core-based Licensing (64-bit)
    Operating System - Microsoft Windows NT 6.1 (7601)
    Patform - NT x64
    Version - MSSQL Version 11.0.3349.0
    Package is set to 32 -bit.  All permissions verified.  Runs in lower environments, same MSSQL version.  All environments are clustered.  In the failing environment, all nodes are at the same service pack.  I have not verified if all
    nodes in the failing environment have SSIS installed.  Data access is installed.  We have other simpler packages that run in this environment, just not this one.  Time to ask the community for help!
    Error:
    Source: Data Flow Task - Data Flow Task (SSIS.Pipeline)     Description: The version of Lookup is not compatible with this version of the DataFlow.  End Error  Error:  Code: 0xC0048020    
    Description: Component "Conditional Split, clsid {7F88F654-4E20-4D14-84F4-AF9C925D3087}" could not be created and returned error code 0x80070005 "Access is denied.". Make sure that the component is registered correctly.  End Error 
    Description: The component is missing, not registered, not upgradeable, or missing required interfaces. The contact information for this component is "Conditional Split;Microsoft Corporation; Microsoft SQL Server; (C) Microsoft Corporation; All Rights
    Reserved; http://www.microsoft.com/sql/support;0".  End Error 
    (Left out shop specific information.  This is the first error in the errors returns by the job history for this package. )
    Thanks in advance.

    Hi DeveloperMax,
    According to your description, the error occurs when you execute the package with Agent job on clustered MSSQL 2012 Enterprise Nodes.
    As per my understanding, I think this issue can be caused by you use SQL Server Agent to schedule a SQL Server Integration Services package in a 64-bit environment. And the SSIS package is referencing some 32-Bit DLL or 32-Bit drivers which are available
    only in 32-bit versions, so the job failed.
    To fix this issue, we should use the 32-bit version of the DTExec.exe utility to schedule the 64-bit SQL Server Agent to run a package. To run a package in 32-bit mode from a 64-bit version of SQL Server Agent, we can go to the Job Step dialog box, then
    select “32 bit runtime” in the Advanced tab.
    Besides, we should make sure that SQL Server Integration Services is installed on the failing environment.
    If there are any other questions, please feel free to ask.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Background job finished but Error sending data

    Dear all,
    report is running in my prod server . once this report completed sapuser get mail . when i check the job status it shows
    Job started
    Step 001 started (program GP4CF9U420G825I4P7DU8XY49WH, variant CUSTOMEROUTSTD, user ID S2K_BASIS)
    Spool request (number 0000012259) created without immediate output
    Error sending data (4)
    Job finished
    one more clarity i required
    this report should goes to 4 SAP users . how can i configure this report to 4 sapusers
    kindly suggest me

    > Step 001 started (program GP4CF9U420G825I4P7DU8XY49WH, variant CUSTOMEROUTSTD, user ID S2K_BASIS)
    > Spool request (number 0000012259) created without immediate output
    > Error sending data (4)
    I'd check SCOT/SOST for any errors. Also check the syslog (SM21).
    > this report should goes to 4 SAP users . how can i configure this report to 4 sapusers
    Create a distribution list (SAPoffice-Inbox - environment - distribution list) and enter that as addresse for the output.
    Markus

  • Saving result from sp_executesql into a variable and using dynamic column name - getting error "Error converting data type varchar to numeric"

    Im getting an error when running a procedure that includes this code.
    I need to select from a dynamic column name and save the result in a variable, but seem to be having trouble with the values being fed to sp_executesql
    DECLARE @retval AS DECIMAL(12,2)
    DECLARE @MonthVal VARCHAR(20), @SpreadKeyVal INT
    DECLARE @sqlcmd AS NVARCHAR(150)
    DECLARE @paramdef NVARCHAR(150)
    SET @MonthVal = 'Month' + CAST(@MonthNumber AS VARCHAR(2) );
    SET @SpreadKeyVal = @SpreadKey; --CAST(@SpreadKey AS VARCHAR(10) );
    SET @sqlcmd = N' SELECT @retvalout = @MonthVal FROM dbo.CourseSpread WHERE CourseSpreadId = @SpreadKeyVal';
    SET @paramdef = N'@MonthVal VARCHAR(20), @SpreadKeyVal INT, @retvalout DECIMAL(12,2) OUTPUT'
    --default
    SET @retval = 0.0;
    EXECUTE sys.sp_executesql @sqlcmd,@paramdef, @MonthVal = 'Month4',@SpreadKeyVal = 1, @retvalout = @retval OUTPUT;
    SELECT @retval
    DECLARE @return_value DECIMAL(12,2)
    EXEC @return_value = [dbo].[GetSpreadValueByMonthNumber]
    @SpreadKey = 1,
    @MonthNumber = 4
    SELECT 'Return Value' = @return_value
    Msg 8114, Level 16, State 5, Line 1
    Error converting data type varchar to numeric.

    Please follow basic Netiquette and post the DDL we need to answer this. Follow industry and ANSI/ISO standards in your data. You should follow ISO-11179 rules for naming data elements. You should follow ISO-8601 rules for displaying temporal data. We need
    to know the data types, keys and constraints on the table. Avoid dialect in favor of ANSI/ISO Standard SQL. And you need to read and download the PDF for: 
    https://www.simple-talk.com/books/sql-books/119-sql-code-smells/
    >> I need to select from a dynamic column name and save the result in a variable, but seem to be having trouble with the values being fed to sp_executesql <<
    This is so very, very wrong! A column is an attribute of an entity. The idea that you are so screwed up that you have no idea if you want
    the shoe size, the phone number or something else at run time of this entity. 
    In Software Engineering we have a principle called cohesion that says a model should do one and only one task, have one and only one entry point, and one and only one exit point. 
    Hey, on a scale from 1 to 10, what color is your favorite letter of the alphabet? Yes, your mindset is that level of sillyity and absurdity. 
    Do you know that SQL is a declarative language? This family of languages does not use local variables! 
    Now think about “month_val” and what it means. A month is a temporal unit of measurement, so this is as silly as saying “liter_val” in your code. Why did you use “sp_” on a procedure? It has special meaning in T-SQL.  
    Think about how silly this is: 
     SET @month_val = 'Month' + CAST(@month_nbr AS VARCHAR(2));
    We do not do display formatting in a query. This is a violation of at the tiered architecture principle. We have a presentation layer. But more than that, the INTERVAL temporal data type is a {year-month} and never just a month. This is fundamental. 
    We need to see the DDL so we can re-write this mess. Want to fix it or not?
    --CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
    in Sets / Trees and Hierarchies in SQL

  • Error in date format when  I load a CSV file

    I am using Oracle G10 XE and I am trying to load data into my database from comma separated files.
    When I load the data from a CSV file which has the date with the following format "DD/MM/YYYY", I received the following error "ORA-01843: not a valid month".
    I have the NSL_LANG set to AMERICAN. I have tried the following command: "ALTER SESSION SET NLS DATE FORMAT="DD/MM/YYYY" and this does nothing. When I try to run "SELECT SYSDATE "NOW" FROM DUAL;" I get the date in this format "10-NOV-06".
    I will appreciate any help about migrating my data with date fields in format DD//MM/YYYY.
    Sincerely,
    Polonio

    See Re: Get error in date when I load a CSV file

  • Error while data loading

    Hi Gurus,
    I am getting error while data loading. At BI side when I  check the error it says Background Job Cancelled and when I check in R3 side I got the following error
    Job started
    Step 001 started (program SBIE0001, variant &0000000065503, user ID R3REMOTE)
    Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
    DATASOURCE = 2LIS_11_V_ITM
             Current Values for Selected Profile Parameters               *
    abap/heap_area_nondia......... 2000683008                              *
    abap/heap_area_total.......... 4000317440                              *
    abap/heaplimit................ 40894464                                *
    zcsa/installed_languages...... ED                                      *
    zcsa/system_language.......... E                                       *
    ztta/max_memreq_MB............ 2047                                    *
    ztta/roll_area................ 6500352                                 *
    ztta/roll_extension........... 3001024512                              *
    4 LUWs confirmed and 4 LUWs to be deleted with function module RSC2_QOUT_CONFIRM_DATA
    ABAP/4 processor: DBIF_RSQL_SQL_ERROR
    Job cancelled
    Please help me out what should I do.
    Regards,
    Mayank

    Hi Mayank,
    The log says it went to short dump due to temp space issue.as its the source system job ,check in the source system side for temp table space and also check at the BI side as well.
    Check with your basis regarding the TEMP PSA table space - if its out of space ask them to increase the table space and try to repeat the load.
    Check the below note
    Note 796422 - DBIF_RSQL_SQL_ERROR during deletion of table BWFI_AEDAT
    Regards
    KP
    Edited by: prashanthk on Jul 19, 2010 10:42 AM

Maybe you are looking for