Error "no link to maintenance cycle" happens after reset to previous phase

Experts:
I have a CHaRM project which has successfully transported a few changes into production.
Then I use action "set to previous phase" several times  to set this project to "development without release".
Then I create another change request by selecting the maintenance cycle of above project.
After authorizing and saving above change request, a normal correction is created. However this normal correction
has an error "no link to maintenance cycle" even its document flow shows the maintenance cycle mentioned above.
The IBase is the same as previous selected and is verified to be right.
Could you help decide what else is wrong?
Thanks!

Hi
Please go to your project and PRESS REFRESH button in System landscape-Change Requests Tab
this update the entries in database then now
goto this table  /TMWFLOW/PROJMAP
Check if the Project is still locked in table /TMWFLOW/PROJMAP: If an error is detected during the processing, then the project might be locked in this table.
The refresh button will help you to get out of this problem and check also if there any other errors.
Regards
Prakhar

Similar Messages

  • No link to maintenance cycle

    After generating a change request to be sent to development the following error occurs. No link to maintenance cycle. Could someone please help me?

    Hi,
    did you create a maintenance cycle like described in the guide:
    http://service.sap.com/solutionmanager -> Downloads -> Documentation -> "3.2 SP08 PDF Documentation Change Request Managmt. English" on page 32 ff. ("Creating a Task List for a Project")?
    Bye

  • I ppearshave an error message "connect to itunes" this happened after i set my pass code.

    .n error message appears on my ipad.  " Ipad disabled connect to itunes"  This happened after attempting to use a pass code.  How do I restore this or overide this?

    From iTunes, select the iPad and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad.
    Others have reported difficulties with this procedure in that the Restore requires the password!  Post back if that happens.

  • An unknown error occurred -54 in itunes this happened after i'd bought new iPod touch and synced it to my iTunes can you not have two iPods on iTunes account??

    Please help i bought a new ipod touch and synced it to my itunes account so i had both ipod touch's on it and now i have an error flashing at me and i don't know what to do??

    == Error -54 ==
    From an OS9 reference, error -54 is a software lock on a file or a permissions error. (Some of the old codes still apply to OSX although there is no formal list of OSX error codes.)
    First, try simply restarting your computer.
    iTunes Library cannot be saved (Error -54) - https://discussions.apple.com/thread/1912814
    Unknown error (-54) while syncing ipod - https://discussions.apple.com/thread/1082953 - problem was locked files
    Why does iTunes keep showing a -54 error when I sync my iPad? - https://discussions.apple.com/thread/3727114
    Error -54 possibly related to Touch Copy - https://discussions.apple.com/thread/3727114 - cleared by deleting preferences on iPad.

  • What do I do about the 1603 error on my ipod touch that happened after I updated ios!

    I recently updated the ios that frequently is asked to upgrade but this time it is stuck in recovery mode and wont restore because of the 1603 and sometimes 1604 error. I have done my research on here and have tried about everything that is reccomended on these forums. I have tried different usb's, different laptops and it just wont work. I am stressed out and do not know what to do . My ipod was working great and is always in its case. I do not have a warranty on it can it be fixed? or will I have to buy a new one that I can't afford? Help . . .  Please

    Error 1604
    This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
    Restore and wait for the error.
    When prompted, click OK.
    Close and reopen iTunes while the device remains connected.
    The device should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    Error 1600, 1601, 1602
    Error 1603
    Follow the steps listed above for Error 1604. Also, discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations. If you do not want to remove the IPSW in the original user, try restoring in a new administrator user. If the issue remains, Eliminate third-party security software conflicts.

  • Link support desk message to project maintenance cycle

    We have a maintenance cycle that we have been using for urgent corrections in one of our landscapes.  Someone has set the linked urgent correction to 'withdrawn' status in error. As a result, all corrections that are open are now displaying the error 'No link to maintenance cycle'.  I have tried using /TMWFLOW/MAINTINST to create a new urgent correction for the maintenance cycle but it does appear to be linked when I check the project in SOLAR_PROJECT_ADMIN.  There was an SAP note 933986, which listed other programs but I find that this note is no longer available.
    Any suggestions are appreciated.

    You have to be sure that Ibase put in ticket is part of your logical component affected to your solman project of your maintenance cycle.
    David

  • Inconsistency with maintenance cycle and task list phases in ChaRM

    Hi Experts,
    I'm deploying ChaRM with SolMan 4.0 SP09.
    I was testing a scenario where there are more than one maintenance project open for same landscape (different logical components but values are the same). I have been using maintenance cycle document (in crmd_order) to control phase changes both in task list and in maintenance cycle.
    I received an error message stating that the system has reset the status of the maintenance cycle and the end result was that task list phase is one step ahead of the maintenance cycle. This of course causes the situation where certain actions are no longer possible (maintenance cycle in Dev with release but task list already in test => release and import are not possible and reseting phase with task list is prevented by ChaRM).
    My question is how do I restore the inconsistency. I have looked for notes (but of course this is not a notes issue) and the internet for solution.
    I am very greatful for any hints you may give me!
    Kind regards,
    Auli

    Thank you!
    Exactly what I'm trying to do. I'll give it a go and get back to you asap.
    BR
    Auli

  • Got an error while setting up account after reset password: "Wrong user name or password"

    Firefox Sync
    I've perform "Reset password" operation and tryed to set up Sync again - and got an error "Wrong user name or password". After resetting password once more error still remains.
    This affect after I've update my Firefox to version 8.0.

    Hi Khimesra,
    Could you please try the following:
    1 - Firewall/antivirus disabled                                   
    2 - B1 uninstalled                                                
    3 - Net 1.1 installed                                            
    4 - B1 reinstalled                                                
    Please also refer to the following SAP notes:
    546344 and 542690
    Regards
    Emanuel

  • I not able to open any links in the emails I receive and get an "Error: No associated application could be found" when I click on it. HELP!! What's going on? This happened after I downloaded Chrome and then

    I not able to open any links in the emails I receive and get an "Error: No associated application could be found" when I click on a link. HELP!! What's going on? This happened after I downloaded Chrome and then decided to delete it. 

    I have Lion and I just came across this link and it took care of the problem.
    Jose Antonio Solis
    Re: Lion: Delete google chrome completely include user profile?
    Try deleting:
    ~Library/Application Support/Google
    and
    ~Library/Caches/Google/Chrome

  • Start up error message - Entry point xml TextReaderConstName could not be located in the dynamic link library libxm12.dll.  Happened after Itunes up date I think. Have tried uninstalling and installing nothing works.  Help please

    At start up I get the error message - The procedure entry point xml TextReaderConstName could not be located in the dynamic link library libxm12.dll.  I have uninstalled it and reinstalled but it does not fix the problem.  Happened after Itunes update I think.

    It's a simple fix and doesn't involve reinstalling anything.
    With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
    Copy the libxml2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
    Restart the programme all should be well
    In case that your OS is (64 bit)
    1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    2. Copy file "libxml2.dll"
    3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    4. Paste file "libxml2.dll" to the location.
    5. Restart the programme, it should not display that message, it should be clear.
    Good Luck

  • ChaRM Error - "No maintenance cycle is open for the current system"

    Hello All,
    I am setting up ChaRM in development system after EGI session with SAP support. I have copied standard transactions to custom ones and created Maintenance and Implementation project to run test of all scenarios.
    I now come across error of "No maintenance cycle is open for the current system" after I create a change request and in the change document, I cannot see it link with task list and the error message is displayed. I tried it with custom transaction as well as standard SAP transaction (SDCR) and get the same error.
    What links a document to a maintenance cycle? Where can I see the config of this setup? I am trying to see where it is broken. I am using the correct IBASE number (production client in logical component), I tried to create a new logical component, new projects with correct settings but it still gives this error message. Please advice.
    Thanks and regards,
    Nischal

    Hi
    did you also unlock the maintenance cycle and open for changes in solar_project_admin by right click
    do check this blog
    /people/dolores.correa/blog/2009/07/23/change-request-management-scenario-working-examples
    /people/dolores.correa/blog/2009/07/23/change-request-management-scenario-working-examples-final-points-and-appendix
    Question no 17
    /people/dolores.correa/blog/2009/07/22/change-request-management-scenario-usual-questions-and-known-errors
    Hope it solves
    Regards
    Prakhar

  • Error while trying to complete a maintenance cycle

    Hi,
    I created a maintenance cycle and had some requests created underneath it, some of them gone into production and some of them till QA and one in Dev stage. Created another project along with created another maintenance cycle. Have some requests on that.
    Now when i try to close the first cycle it showed all the requests completed and the one still in the cycle (testing stage, dev stage) and also it gave a message like if you complete now it will not be reused in this cycle but when next cycle for that project is created it will be transferred there. I went ahead and tried to complete (close) the cycle, but it is not doing it. The following is what the error showing:
    CTS projects for Solman project ZMAINT_1 could not be releaed
    CTS project DR1_P0004 in system DR1 client 130 could not be released
    Status is showing as Being Completed and it is not allowing to create new cycle since the previous is not completed properly.
    Any idea like anything particularly to be done for those CTS project in development system.
    Thanks,
    Murali.

    Hi Ruben,
      Thanks for the reply and it worked after releasing the modifiable requests under that cycle. But when i created another cycle under that project it transferred all the urgent correction transports (some of them went to production, some of them not) from the previous closed one but it is not showing any normal correction related transport requests, what happened to those normally when you close a cycle ?
    Thanks,
    Murali.

  • I'm unable to update my apps or download new apps to my Iphone. When I try I get a message "An unknown error has occurred".  It was happening before and after the last OS upgrade.  I've done a hard reboot with no effect.  Any suggestions???

    I'm unable to update my apps or download new apps to my Iphone. When I try I get a message "An unknown error has occurred".  It was happening before and after the last OS upgrade.  I've done a hard reboot with no effect.  Any suggestions???

    Have either of you had any luck with this issue.  It began happening to me today when I was trying to purchase music on iTunes.  I have purchased music and games in the past and have had no problem.  Any help would be appreciated.

  • Error "No maintenance cycle is open for the current system"

    Hi,
    I'm setting up the ChaRM for test purposes.
    I have done everything according to SAP Expert Guided session requirements (like Basic configuration, Landscape and TSMS set-up) and also was reading and checking the following Blog " Change Request Management scenario: Working examples"
    /people/dolores.correa/blog/2009/07/23/change-request-management-scenario-working-examples
    Everything seems to be ok:
    1) Landscape ok, IBase created and active, Partners assigned to each component
    2) Maintenance project created and Maintenance cycle set to "Development with release"
    3) I can easily create Change request (I tried Normal correction), approve it.
    4) When I open Change Document for approved change reques - it gives error "No maintenance cycle is open for the current system" and I can't proceed with setting Change document status to "In development".
    In Change Request I indicate the only IBase (1) and as Component - SolMan clent 803, whish is set-up like PRD.
    What could be wrong?
    I tried reading all threads but did not get solution - there were suggestions to activate maintenance cycle (in my case it active), to check if business partners are assigned to IBase components (in my case done),
    What else?
    Thanks in advance,
    Ausra Gustainiene

    Hi Ausra,
    Please, take a look at this topic:
    Change Request Management scenario: Usual questions and known errors
    /people/dolores.correa/blog/2009/07/22/change-request-management-scenario-usual-questions-and-known-errors
    17. Error: "No maintenance cycle is opened for the current system"
    Best Regards,
    Fernando Rocha

  • After the most recent iPhoto update, I keep getting the following error: "iPhoto quit unexpectedly while using the Sonix SN9c201 webcam plugin."  This seems to happen after *every* iPhoto update.  Is there a fix on the way?

    After the most recent iPhoto update, I keep getting the following error: "iPhoto quit unexpectedly while using the Sonix SN9c201 webcam plugin."  This seems to happen after *every* iPhoto update.  Is there a fix on the way?

    As you can see below, when I right click, I have no such option.  In the User Account Settings, I'm operating as the "System Administrator".
    Any other suggestions?

Maybe you are looking for

  • Email screen is frozen how to fix

    EEmail screen is frozen how to fix

  • Compaq Presario c700 laptop RAM.....Blue screen!!!!

    Hello, I just recently removed vista and upgarded to Win7 32 bit. I tryed to add 4gb of RAM, due to the factory 1gb it came with.  However got a Blue screen Error.  After that I only installed 1 of/ 2gb stick of RAM and it worked.  My quetsion is, I

  • Ilash and Directory Server Resource Kit 5.2

    I can't seem to find the 'ilash: the LDAP Administrative Shell' utility within the latest download of the Directory Resource Kit 5.2... http://docs.sun.com/app/docs/doc/816-6400-10/ http://docs.sun.com/app/docs/doc/816-6400-10/ilash.html Has it been

  • Reading variables/​parameters from stpper motor controller

    I have three Pacific Scientific stepper motors and controllers. The controllers are programmable via a proprietary version of the basic programming language, called stepperbasic. I can control the motors using labview by performing a serial write fun

  • How can I hide "Transferring data..." status?

    I want to hide the "Transferring data..." status that shows on the lower left of the browser screen because it is as hazardous as a flickering icon, from a usability standpoint.