Error: Nothing to be done for...
Hi Everybody,
I have a problem executing commands on Solaris 9 installed on SPARC system. Whenever I try to execute any command, such as man, clear, configure, etc I get Nothing to be done for error.
for example
# clear
sh: Nothing to be done for `/usr/bin/clear'.Can anybody help me?
thanks in advance
Kishore
Hi,
We have sorted the issue. sh was corrupted, we replace with a working one.
Similar Messages
-
I just updated to 10.9.4 and all my mail accounts are now offline. Unable to send or receive mail. nothing else was done except for updating to 10.9.4
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
iTunes wont open for me. it keeps saying "the Disc "untitled playlist" cannot be read. An unknown error occurred (-69)." don't know how to get it to work. Please help
It is likely a hardware failure
http://support.apple.com/kb/TS3694?viewlocale=en_US#error1 -
Error "Part1 will not be done for the excess GR quantity" in STO GRN
Hi,
While posting STO grn the error message is displayed "Part1 will not be done for the excess GR quantity".
We have checked CIN settings for Excise groups, the "GRs per EI" is maintained as "2 Multiple goods receipt, multiple credit".
In J1ID, for materials it is already maintained as "2 Multiple goods receipt, multiple credit".
No partial GR is posted for the delivery.
Still system is throwing the error message "Part1 will not be done for the excess GR quantity".Hi,
Please provide the following for a clear picture.
1. PO qty
2. Quantity invoiced by the supplying plant
3. Quantity you are mentioning in GR
Regards,
Siva -
When updating Adobe Acrobat Pro XI i get the Error 1603, i've done repairs and reinstall and nothing works, how do i resolve this?
Error Updating have you completed all of the steps listed in Error 1603: A fatal error occurred during installation? Did you have any questions on any of the steps listed?
-
I'm trying to migrate my CS4 from my old Mac to my new one. When trying to open photoshop, i get a message saying "Licensing for this product has stopped working." And "Error: 150:30" I don't know what to do from here. Can someone help me? Thanks.
"Migrating" and/or "transferring" an application is not just asking for trouble but demanding it!
Always install an Adobe application from scratch, from the original media: CD or download. -
Illustrator keeps quitting…notice others have had similar issues…so what it the reason for "sending a report" to Adobe if nothing can be done with it????? paying for a product that I can't use when I need to use it and no help…come on…someone has to have an answer…HELP Pleeeeease
<moved from Adobe Creative Cloud to Illustrator>
reset your preferences -
acrobat: http://help.adobe.com/en_US/acrobat/X/pro/using/WS58a04a822e3e50102bd615109794195ff-7feb.w .html
adobe media encoder: https://forums.adobe.com/thread/1713540
after effects: http://helpx.adobe.com/after-effects/using/preferences.html
dreamweaver: https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html
flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html
illustrator: http://helpx.adobe.com/illustrator/using/setting-preferences.html
indesign: https://forums.adobe.com/thread/526990
lightroom: https://helpx.adobe.com/lightroom/help/setting-preferences-lightroom.html
muse (mac): https://forums.adobe.com/thread/1246022?tstart=0
photoshop: https://forums.adobe.com/thread/375776
photoshop elements: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html, http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm
premiere elements: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html
premiere pro: http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html
if that fails, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall -
I just downloaded an iphoto update and when I tried to share my photos was asked for email and password. I must have typed in the info wrong because I keep getting an error message. I don't see how to change the info to the correct mistake..
I too added 2nd apple ID when I tried to get Free app from apple store just to get to NONE on the credit card needed. It said it sent confirmation email to my new apple ID email that I have to confirm. Problem is I can not get to the new apple ID email account. On my ipad it logs into my original email account and I see no where to log into another email account. If I go to my laptop, the new apple ID I created does not let me log into email where apple said it was sent to. It did not send to back up email account either.
Can I log into 2 email accounts on my ipad where it says mail at bottom?
Can I have 2 apple ids?
If I created a 2nd apple id to get to NONE on credit card needed, can't I log into it also on another laptop in gmail?
(won't let me)
If I used my original apple id I created when I got my new ipad, it will not let me get free app without credit card, there is no where it says NONE needed. I am too new to apple to start with credit cards etc until I get use to it. -
I am not able to open your answer for some reason my computer is not opening it in Explorer, it’s not responding and I keep getting error messages and I don’t know how to open it in another browser when Explorer experiencing issues.
HeatherIf you have IE version 10 go to TOOLS and change the option to use Compatibility View
-
I Can't able to download IOS 7. I n my software update it is giving an error " Unable to check for updates. An error occured while checking for software update". What can be done for this error?
Me too having the same thing what's the solution for this how can I update
-
Since yesterday my iphone 4 has started to freeze intermittently when unlocking. When it happens nothing happens (left it for an hour last night) until I reset the phone, but it's done it 5 times today. Never had this prob before. Any thoughts?
I had the same problem (freezing iphone when trying to unlock) today.
1) I made a backup of my iphone using itunes.
2) Went to my service provider and made a sim swap. So, I think there was a problem with the nano simcard.
Problem solved. -
JSPM: Error while detecting start profile for instance with ID _c.
Hi Experts,
we have an error when we start JSPM with message "cannot initialize application data. Error while detecting start profile for instance with ID _c." . Until now nothing has been updated yet. The system can be started up and shut down without any problem. The profiles are found in /usr/sap/PMA/SYS/profile
Our BI system is currently Netweaver 7.0 with SPS14. We plan to update it to SPS20. But when we start JSPM, we have abover error.
could somebody give a help? Thank you very much.
Rongfeng
P.S. the log file DETECT_SYSTEM_PARAMETERS_01.LOG:
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[1.5.3.7185 - 630]/>
<!NAME[/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/log/log_2009_11_18_10_28_50/DETECT_SYSTEM_PARAMETERS_01.LOG]/>
<!PATTERN[DETECT_SYSTEM_PARAMETERS_01.LOG]/>
<!FORMATTER[com.sap.tc.logging.ListFormatter]/>
<!ENCODING[UTF8]/>
<!LOGHEADER[END]/>
#1.5^H#C000995FC0200000000000207BD47BD40004789C01294DB0#1258511336558#/System/Server/Upgrade/JSPM##com.sap.sdt.jspm.gui.InitialParametersDetector.initializeJspmDataModel(InitialParametersDetector.java:397)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.jspm.gui.InitialParametersDetector.initializeJspmDataModel(InitialParametersDetector.java:397)#Java###Initializing JSPM data model...##
#1.5^H#C000995FC0200000000000217BD47BD40004789C01295968#1258511336561#/System/Server/Upgrade/JSPM##com.sap.sdt.jspm.gui.InitialParametersDetector.detectProfileDirectory(InitialParametersDetector.java:1468)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.jspm.gui.InitialParametersDetector.detectProfileDirectory(InitialParametersDetector.java:1468)#Java###Detected profile directory .#1#/usr/sap/PMA/SYS/profile#
#1.5^H#C000995FC0200000000000227BD47BD40004789C0141AFE0#1258511338156#/System/Server/Upgrade/JSPM##com.sap.sdt.jspm.gui.InitialParametersDetector.detectDb(InitialParametersDetector.java:936)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.jspm.gui.InitialParametersDetector.detectDb(InitialParametersDetector.java:936)#Java###Detecting the parameters of the database...##
#1.5^H#C000995FC0200000000000237BD47BD40004789C014205D0#1258511338178#/System/Server/Upgrade/JSPM##com.sap.sdt.db.dmtif.AbstractDMTController.execute(AbstractDMTController.java:261)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.db.dmtif.AbstractDMTController.execute(AbstractDMTController.java:261)#Java###Executing command with arguments .#2#dbinfo#/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/config/DBINFO.XML#
#1.5^H#C000995FC0200000000000247BD47BD40004789C01421570#1258511338182#/System/Server/Upgrade/JSPM##com.sap.sdt.tools.proc.JavaOsProcessController.logProcessInfo(JavaOsProcessController.java:41)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.tools.proc.JavaOsProcessController.logProcessInfo(JavaOsProcessController.java:41)#Java###Java process ID , name has been started.#2#5#com.sap.sdt.dmt.main.DMT#
#1.5^H#C000995FC0200000000000257BD47BD40004789C01421958#1258511338183#/System/Server/Upgrade/JSPM##com.sap.sdt.tools.proc.JavaOsProcessController.logProcessInfo(JavaOsProcessController.java:54)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.tools.proc.JavaOsProcessController.logProcessInfo(JavaOsProcessController.java:54)#Java###Command line: #2# #/opt/IBMJava2-amd64-142/jre/bin/java -cp .:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/lib/sdt_dmt.jar:/oracle/client/10x_64/instantclient/ojdbc14.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/lib/jddi.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/lib/opensqlsta.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/lib/tc_sec_secstorefs.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/lib/frame.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/lib/exception.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/lib/logging.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/lib/jperflib.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/lib/util.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/./lib/tc_sec_secstorefs.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/./lib/exception.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/./lib/logging.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/./lib/opensqlsta.jar:/sapmnt/PMA/global/security/lib/tools/info/IAIKSecurityFS.list:/sapmnt/PMA/global/security/lib/tools/iaik_jce.jar:/sapmnt/PMA/global/security/lib/tools/iaik_smime.jar:/sapmnt/PMA/global/security/lib/tools/iaik_jsse.jar:/sapmnt/PMA/global/security/lib/tools/w3c_http.jar:/sapmnt/PMA/global/security/lib/tools/iaik_ssl.jar:/sapmnt/PMA/global/security/lib/engine/info/IAIKSecurityFS.list:/sapmnt/PMA/global/security/lib/engine/iaik_jce.jar com.sap.sdt.dmt.main.DMT -rootdir=/usr/sap/PMA/DVEBMGS10/j2ee/JSPM -descriptor=csrt29_PMA -logfile=/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/log/log_2009_11_18_10_28_50/DMT_01.LOG dbinfo /usr/sap/PMA/DVEBMGS10/j2ee/JSPM/config/DBINFO.XML#
#1.5^H#C000995FC0200000000000267BD47BD40004789C01422128#1258511338185#/System/Server/Upgrade/JSPM##com.sap.sdt.tools.proc.JavaOsProcessController.logProcessInfo(JavaOsProcessController.java:55)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.tools.proc.JavaOsProcessController.logProcessInfo(JavaOsProcessController.java:55)#Java###Standard out: #2# #/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/log/log_2009_11_18_10_28_50/DMT_01_01.OUT#
#1.5^H#C000995FC0200000000000277BD47BD40004789C01424838#1258511338195#/System/Server/Upgrade/JSPM##com.sap.sdt.tools.proc.OsProcessController.launch(OsProcessController.java:126)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.tools.proc.OsProcessController.launch(OsProcessController.java:126)#Java###Process ID has been started.#1#5#
#1.5^H#C000995FC0200000000000287BD47BD40004789C014253F0#1258511338198#/System/Server/Upgrade/JSPM##com.sap.sdt.tools.proc.OsProcessController.waitFor(OsProcessController.java:182)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.tools.proc.OsProcessController.waitFor(OsProcessController.java:182)#Java###Waiting for process ID , name to finish.#2#5#java#
#1.5^H#C000995FC0200000000000297BD47BD40004789C017402B0#1258511341454#/System/Server/Upgrade/JSPM##com.sap.sdt.tools.proc.OsProcessController.waitFor(OsProcessController.java:215)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.tools.proc.OsProcessController.waitFor(OsProcessController.java:215)#Java###Process ID , name has been finished, exit code .#3#5#java#0#
#1.5^H#C000995FC02000000000002A7BD47BD40004789C01741638#1258511341459#/System/Server/Upgrade/JSPM##com.sap.sdt.db.dmtif.AbstractDMTController.execute(AbstractDMTController.java:273)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.db.dmtif.AbstractDMTController.execute(AbstractDMTController.java:273)#Java###Command has been executed.#1#dbinfo#
#1.5^H#C000995FC02000000000002B7BD47BD40004789C017421F0#1258511341462#/System/Server/Upgrade/JSPM##com.sap.sdt.jspm.gui.InitialParametersDetector.detectDb(InitialParametersDetector.java:984)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.jspm.gui.InitialParametersDetector.detectDb(InitialParametersDetector.java:984)#Java###Detection of the parameters of the database has finished. Database type is , database name is and database version is .#3#ORA#Oracle#10.2.0.2.0#
#1.5^H#C000995FC02000000000002C7BD47BD40004789C01744CE8#1258511341473#/System/Server/Upgrade/JSPM##com.sap.sdt.j2ee.tools.sysinfo.AbstractInfoController.updateProfileVariable(AbstractInfoController.java:284)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.j2ee.tools.sysinfo.AbstractInfoController.updateProfileVariable(AbstractInfoController.java:284)#Java###Parameter has been detected. Parameter value is .#2#/J2EE/StandardSystem/DefaultProfilePath#/usr/sap/PMA/SYS/profile/DEFAULT.PFL#
Sorry, I don't know how to format post
Edited by: Rongfeng Shi on Nov 18, 2009 4:20 AMHi Rongfeng,
There is not much information about the error in the log file you have pasted above.
Please repeat the issue and catch the log files once again.
Are you able to open SDM ?
Best Regards
Raghu -
I just found an error in the file name for my camera raw cache file. The error is in my username. I don't know how to correct the error or if I should just leave it. I'm not sure where my cache file is stored on my computer. Any help would be appreciated.
Thank youSince you are on a Mac if when you first set up your account you left out the i in Wilson nothing you do will change that. The REAL account name will always be alicewlson. Once an account is created you can't actually change the name of it. You can change the name that is displayed but not the REAL account name.
Simplest thing to do is stop worrying about it. Everything is as it should be, that is except Wilson being spelled without the i.
Lilac50 wrote:
When I searched finder for "alicewlson" I found a long list of files like this:
2014-07-22 12.50/File005.nef[15:16:35.212] (debug) src/ImageLoader.cpp:363: File: /Users/alicewlson/Recovered/2014-07-22 12.50/File002.nef[15:18:02.173] (debug) src/StoreXMLFile.cpp:21: /Users/alicewlson//.rpro/rpro.cfg
I believe I made the error in my user name when I first got my computer a year ago. I then corrected it under my user name but not in my Lightroom files. I also looked for files with a .lrdata extension and didn't find any. -
just installed ColdFusion, from adode flex 3 training from the sourse. But when I check to see if it works correctly by entering jrun -start cfusion in the command prom I get the error, no known vms (check for currupt jvm.cfg file). I tried uninstalling Java and reinstalling but nothing changed.
I don't know what I need to do to get it working can anyone help?
many thanksWhen you say you can't open the jvm.config file, what exactly does this mean? Is the file zero-length? How have you tried to open it? It's a text file, and should be opened in Notepad.
Dave Watts, CTO, Fig Leaf Software
http://www.figleaf.com/
http://training.figleaf.com/
Fig Leaf Software is a Veteran-Owned Small Business (VOSB) on
GSA Schedule, and provides the highest caliber vendor-authorized
instruction at our training centers, online, or onsite.
Read this before you post:
http://forums.adobe.com/thread/607238 -
Akonadi database error code: 1062 Duplicate entry for key
Since my email provider migrated their webmail platform, I keep getting an error each time kmail attempts to get emails from their imap server: could not create collection INBOX resourceid: 17
I double checked the provided imap settings have not changed and are correct : imap.laposte.net port 993 using SSL/TLS
As you can see in the pasted akonadi self-test report below, I have a few errors related to innodb, the absence of mysql tables in local/share/akonadi/db_data/ and the table performance_schema having the wrong structure. Those have been there for several months but I've been unable to fix them and I didn't care because my email was working. I suppose they are unrelated to my current issues.
Any help I can get is much welcome.
Akonadi Server Self-Test Report
===============================
Test 1: SUCCESS
Database driver found.
Details: The QtSQL driver 'QMYSQL' is required by your current Akonadi server configuration and was found on your system.
File content of '/home/the_user/.config/akonadi/akonadiserverrc':
[%General]
Driver=QMYSQL
[QMYSQL]
Name=akonadi
Host=
Options="UNIX_SOCKET=/tmp/akonadi-the_user.kKTLSR/mysql.socket"
ServerPath=/usr/bin/mysqld
StartServer=true
User=
Password=
[Debug]
Tracer=null
[QPSQL]
StartServer=true
Name=akonadi
Host=
User=
Password=
Port=5432
[SQLITE]
Name=akonadi
Test 2: SUCCESS
Akonadi is not running as root
Details: Akonadi is not running as a root/administrator user, which is the recommended setup for a secure system.
Test 3: SUCCESS
MySQL server found.
Details: You have currently configured Akonadi to use the MySQL server '/usr/bin/mysqld'.
Make sure you have the MySQL server installed, set the correct path and ensure you have the necessary read and execution rights on the server executable. The server executable is typically called 'mysqld'; its location varies depending on the distribution.
Test 4: SUCCESS
MySQL server is executable.
Details: MySQL server found: /usr/bin/mysqld Ver 10.0.14-MariaDB-log for Linux on x86_64 (MariaDB Server)
Test 5: ERROR
MySQL server log contains errors.
Details: The MySQL server error log file '<a href='/home/the_user/.local/share/akonadi/db_data/mysql.err'>/home/the_user/.local/share/akonadi/db_data/mysql.err</a>' contains errors.
File content of '/home/the_user/.local/share/akonadi/db_data/mysql.err':
141129 9:34:33 [Warning] You need to use --log-bin to make --binlog-format work.
2014-11-29 09:34:33 7f5b81d0b780 InnoDB: Warning: Using innodb_additional_mem_pool_size is DEPRECATED. This option may be removed in future releases, together with the option innodb_use_sys_malloc and with the InnoDB's internal memory allocator.
141129 9:34:33 [Note] InnoDB: Using mutexes to ref count buffer pool pages
141129 9:34:33 [Note] InnoDB: The InnoDB memory heap is disabled
141129 9:34:33 [Note] InnoDB: Mutexes and rw_locks use GCC atomic builtins
141129 9:34:33 [Note] InnoDB: Memory barrier is not used
141129 9:34:33 [Note] InnoDB: Compressed tables use zlib 1.2.8
141129 9:34:33 [Note] InnoDB: Using Linux native AIO
141129 9:34:33 [Note] InnoDB: Using CPU crc32 instructions
141129 9:34:33 [Note] InnoDB: Initializing buffer pool, size = 80.0M
141129 9:34:33 [Note] InnoDB: Completed initialization of buffer pool
141129 9:34:33 [Note] InnoDB: Highest supported file format is Barracuda.
141129 9:34:33 [Note] InnoDB: The log sequence numbers 66340678877 and 66340678877 in ibdata files do not match the log sequence number 66344113222 in the ib_logfiles!
141129 9:34:33 [Note] InnoDB: Database was not shutdown normally!
141129 9:34:33 [Note] InnoDB: Starting crash recovery.
141129 9:34:33 [Note] InnoDB: Reading tablespace information from the .ibd files...
141129 9:34:33 [Note] InnoDB: Restoring possible half-written data pages
141129 9:34:33 [Note] InnoDB: from the doublewrite buffer...
141129 9:34:34 [Note] InnoDB: 128 rollback segment(s) are active.
141129 9:34:34 [Note] InnoDB: Waiting for purge to start
141129 9:34:34 [Note] InnoDB: Percona XtraDB (http://www.percona.com) 5.6.20-68.0 started; log sequence number 66344113222
141129 9:34:34 [Note] Plugin 'FEEDBACK' is disabled.
141129 9:34:34 [ERROR] Can't open and lock privilege tables: Table 'mysql.servers' doesn't exist
141129 9:34:34 [Warning] Can't open and lock time zone table: Table 'mysql.time_zone_leap_second' doesn't exist trying to live without them
141129 9:34:34 [ERROR] Native table 'performance_schema'.'cond_instances' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_waits_current' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_waits_history' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_waits_history_long' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_waits_summary_by_host_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_waits_summary_by_instance' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_waits_summary_by_thread_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_waits_summary_by_user_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_waits_summary_by_account_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_waits_summary_global_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'file_instances' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'file_summary_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'file_summary_by_instance' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'host_cache' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'mutex_instances' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'objects_summary_global_by_type' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'performance_timers' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'rwlock_instances' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'setup_actors' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'setup_consumers' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'setup_instruments' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'setup_objects' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'setup_timers' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'table_io_waits_summary_by_index_usage' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'table_io_waits_summary_by_table' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'table_lock_waits_summary_by_table' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'threads' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_stages_current' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_stages_history' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_stages_history_long' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_stages_summary_by_thread_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_stages_summary_by_account_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_stages_summary_by_user_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_stages_summary_by_host_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_stages_summary_global_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_statements_current' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_statements_history' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_statements_history_long' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_statements_summary_by_thread_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_statements_summary_by_account_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_statements_summary_by_user_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_statements_summary_by_host_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_statements_summary_global_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_statements_summary_by_digest' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'users' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'accounts' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'hosts' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'socket_instances' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'socket_summary_by_instance' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'socket_summary_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'session_connect_attrs' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'session_account_connect_attrs' has the wrong structure
141129 9:34:34 [Warning] Failed to load slave replication state from table mysql.gtid_slave_pos: 1146: Table 'mysql.gtid_slave_pos' doesn't exist
141129 9:34:34 [Note] Reading of all Master_info entries succeded
141129 9:34:34 [Note] Added new Master_info '' to hash table
141129 9:34:34 [Note] /usr/bin/mysqld: ready for connections.
Version: '10.0.14-MariaDB' socket: '/tmp/akonadi-the_user.kKTLSR/mysql.socket' port: 0 MariaDB Server
2014-11-29 09:34:34 7f5b81c77700 InnoDB: Error: Table "mysql"."innodb_table_stats" not found.
141129 15:14:56 [Warning] Aborted connection 58 to db: 'akonadi' user: 'the_user' host: '' (Unknown error)
Test 6: SUCCESS
MySQL server default configuration found.
Details: The default configuration for the MySQL server was found and is readable at <a href='/usr/share/config/akonadi/mysql-global.conf'>/usr/share/config/akonadi/mysql-global.conf</a>.
File content of '/usr/share/config/akonadi/mysql-global.conf':
# Global Akonadi MySQL server settings,
# These settings can be adjusted using $HOME/.config/akonadi/mysql-local.conf
# Based on advice by Kris Köhntopp <[email protected]>
[mysqld]
# strict query parsing/interpretation
# TODO: make Akonadi work with those settings enabled
# sql_mode=strict_trans_tables,strict_all_tables,strict_error_for_division_by_zero,no_auto_create_user,no_auto_value_on_zero,no_engine_substitution,no_zero_date,no_zero_in_date,only_full_group_by,pipes_as_concat
# sql_mode=strict_trans_tables
# DEBUGGING:
# log all queries, useful for debugging but generates an enormous amount of data
# log=mysql.full
# log queries slower than n seconds, log file name relative to datadir (for debugging only)
# log_slow_queries=mysql.slow
# long_query_time=1
# log queries not using indices, debug only, disable for production use
# log_queries_not_using_indexes=1
# mesure database size and adjust innodb_buffer_pool_size
# SELECT sum(data_length) as bla, sum(index_length) as blub FROM information_schema.tables WHERE table_schema not in ("mysql", "information_schema");
# NOTES:
# Keep Innob_log_waits and keep Innodb_buffer_pool_wait_free small (see show global status like "inno%", show global variables)
#expire_logs_days=3
#sync_bin_log=0
# Use UTF-8 encoding for tables
character_set_server=utf8
collation_server=utf8_general_ci
# use InnoDB for transactions and better crash recovery
default_storage_engine=innodb
# memory pool InnoDB uses to store data dictionary information and other internal data structures (default:1M)
# Deprecated in MySQL >= 5.6.3
innodb_additional_mem_pool_size=1M
# memory buffer InnoDB uses to cache data and indexes of its tables (default:128M)
# Larger values means less I/O
innodb_buffer_pool_size=80M
# Create a .ibd file for each table (default:0)
innodb_file_per_table=1
# Write out the log buffer to the log file at each commit (default:1)
innodb_flush_log_at_trx_commit=2
# Buffer size used to write to the log files on disk (default:1M for builtin, 8M for plugin)
# larger values means less I/O
innodb_log_buffer_size=1M
# Size of each log file in a log group (default:5M) larger means less I/O but more time for recovery.
innodb_log_file_size=64M
# # error log file name, relative to datadir (default:hostname.err)
log_error=mysql.err
# print warnings and connection errors (default:1)
log_warnings=2
# Convert table named to lowercase
lower_case_table_names=1
# Maximum size of one packet or any generated/intermediate string. (default:1M)
max_allowed_packet=32M
# Maximum simultaneous connections allowed (default:100)
max_connections=256
# The two options below make no sense with prepared statements and/or transactions
# (make sense when having the same query multiple times)
# Memory allocated for caching query results (default:0 (disabled))
query_cache_size=0
# Do not cache results (default:1)
query_cache_type=0
# Do not use the privileges mechanisms
skip_grant_tables
# Do not listen for TCP/IP connections at all
skip_networking
# The number of open tables for all threads. (default:64)
table_open_cache=200
# How many threads the server should cache for reuse (default:0)
thread_cache_size=3
# wait 365d before dropping the DB connection (default:8h)
wait_timeout=31536000
# We use InnoDB, so don't let MyISAM eat up memory
key_buffer_size=16K
[client]
default-character-set=utf8
Test 7: SUCCESS
MySQL server custom configuration found.
Details: The custom configuration for the MySQL server was found and is readable at <a href='/home/the_user/.config/akonadi/mysql-local.conf'>/home/the_user/.config/akonadi/mysql-local.conf</a>
File content of '/home/the_user/.config/akonadi/mysql-local.conf':
# workaround fix for akonadi db error after server upgrade
# http://forum.kde.org/viewtopic.php?f=215&t=101004
[mysqld]
binlog_format=row
Test 8: SUCCESS
MySQL server configuration is usable.
Details: The MySQL server configuration was found at <a href='/home/the_user/.local/share/akonadi/mysql.conf'>/home/the_user/.local/share/akonadi/mysql.conf</a> and is readable.
File content of '/home/the_user/.local/share/akonadi/mysql.conf':
# Global Akonadi MySQL server settings,
# These settings can be adjusted using $HOME/.config/akonadi/mysql-local.conf
# Based on advice by Kris Köhntopp <[email protected]>
[mysqld]
# strict query parsing/interpretation
# TODO: make Akonadi work with those settings enabled
# sql_mode=strict_trans_tables,strict_all_tables,strict_error_for_division_by_zero,no_auto_create_user,no_auto_value_on_zero,no_engine_substitution,no_zero_date,no_zero_in_date,only_full_group_by,pipes_as_concat
# sql_mode=strict_trans_tables
# DEBUGGING:
# log all queries, useful for debugging but generates an enormous amount of data
# log=mysql.full
# log queries slower than n seconds, log file name relative to datadir (for debugging only)
# log_slow_queries=mysql.slow
# long_query_time=1
# log queries not using indices, debug only, disable for production use
# log_queries_not_using_indexes=1
# mesure database size and adjust innodb_buffer_pool_size
# SELECT sum(data_length) as bla, sum(index_length) as blub FROM information_schema.tables WHERE table_schema not in ("mysql", "information_schema");
# NOTES:
# Keep Innob_log_waits and keep Innodb_buffer_pool_wait_free small (see show global status like "inno%", show global variables)
#expire_logs_days=3
#sync_bin_log=0
# Use UTF-8 encoding for tables
character_set_server=utf8
collation_server=utf8_general_ci
# use InnoDB for transactions and better crash recovery
default_storage_engine=innodb
# memory pool InnoDB uses to store data dictionary information and other internal data structures (default:1M)
# Deprecated in MySQL >= 5.6.3
innodb_additional_mem_pool_size=1M
# memory buffer InnoDB uses to cache data and indexes of its tables (default:128M)
# Larger values means less I/O
innodb_buffer_pool_size=80M
# Create a .ibd file for each table (default:0)
innodb_file_per_table=1
# Write out the log buffer to the log file at each commit (default:1)
innodb_flush_log_at_trx_commit=2
# Buffer size used to write to the log files on disk (default:1M for builtin, 8M for plugin)
# larger values means less I/O
innodb_log_buffer_size=1M
# Size of each log file in a log group (default:5M) larger means less I/O but more time for recovery.
innodb_log_file_size=64M
# # error log file name, relative to datadir (default:hostname.err)
log_error=mysql.err
# print warnings and connection errors (default:1)
log_warnings=2
# Convert table named to lowercase
lower_case_table_names=1
# Maximum size of one packet or any generated/intermediate string. (default:1M)
max_allowed_packet=32M
# Maximum simultaneous connections allowed (default:100)
max_connections=256
# The two options below make no sense with prepared statements and/or transactions
# (make sense when having the same query multiple times)
# Memory allocated for caching query results (default:0 (disabled))
query_cache_size=0
# Do not cache results (default:1)
query_cache_type=0
# Do not use the privileges mechanisms
skip_grant_tables
# Do not listen for TCP/IP connections at all
skip_networking
# The number of open tables for all threads. (default:64)
table_open_cache=200
# How many threads the server should cache for reuse (default:0)
thread_cache_size=3
# wait 365d before dropping the DB connection (default:8h)
wait_timeout=31536000
# We use InnoDB, so don't let MyISAM eat up memory
key_buffer_size=16K
[client]
default-character-set=utf8
# workaround fix for akonadi db error after server upgrade
# http://forum.kde.org/viewtopic.php?f=215&t=101004
[mysqld]
binlog_format=row
Test 9: SUCCESS
akonadictl found and usable
Details: The program '/usr/bin/akonadictl' to control the Akonadi server was found and could be executed successfully.
Result:
Akonadi 1.13.0
Test 10: SUCCESS
Akonadi control process registered at D-Bus.
Details: The Akonadi control process is registered at D-Bus which typically indicates it is operational.
Test 11: SUCCESS
Akonadi server process registered at D-Bus.
Details: The Akonadi server process is registered at D-Bus which typically indicates it is operational.
Test 12: SKIP
Protocol version check not possible.
Details: Without a connection to the server it is not possible to check if the protocol version meets the requirements.
Test 13: SUCCESS
Resource agents found.
Details: At least one resource agent has been found.
Directory listing of '/usr/share/akonadi/agents':
akonadibalooindexingagent.desktop
akonadinepomukfeederagent.desktop
akonotesresource.desktop
archivemailagent.desktop
birthdaysresource.desktop
contactsresource.desktop
davgroupwareresource.desktop
facebookresource.desktop
followupreminder.desktop
googlecalendarresource.desktop
googlecontactsresource.desktop
icaldirresource.desktop
icalresource.desktop
imapresource.desktop
invitationsagent.desktop
kabcresource.desktop
kalarmdirresource.desktop
kalarmresource.desktop
kcalresource.desktop
kdeaccountsresource.desktop
knutresource.desktop
kolabproxyresource.desktop
kolabresource.desktop
localbookmarksresource.desktop
maildirresource.desktop
maildispatcheragent.desktop
mailfilteragent.desktop
mboxresource.desktop
migrationagent.desktop
mixedmaildirresource.desktop
mtdummyresource.desktop
newmailnotifieragent.desktop
nntpresource.desktop
notesresource.desktop
openxchangeresource.desktop
pop3resource.desktop
sendlateragent.desktop
vcarddirresource.desktop
vcardresource.desktop
Environment variable XDG_DATA_DIRS is set to '/usr/share:/usr/share:/usr/local/share'
Test 14: ERROR
Current Akonadi server error log found.
Details: The Akonadi server reported errors during its current startup. The log can be found in <a href='/home/the_user/.local/share/akonadi/akonadiserver.error'>/home/the_user/.local/share/akonadi/akonadiserver.error</a>.
File content of '/home/the_user/.local/share/akonadi/akonadiserver.error':
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
Test 15: ERROR
Previous Akonadi server error log found.
Details: The Akonadi server reported errors during its previous startup. The log can be found in <a href='/home/the_user/.local/share/akonadi/akonadiserver.error.old'>/home/the_user/.local/share/akonadi/akonadiserver.error.old</a>.
File content of '/home/the_user/.local/share/akonadi/akonadiserver.error.old':
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
Control process died, committing suicide!
Test 16: ERROR
Current Akonadi control error log found.
Details: The Akonadi control process reported errors during its current startup. The log can be found in <a href='/home/the_user/.local/share/akonadi/akonadi_control.error'>/home/the_user/.local/share/akonadi/akonadi_control.error</a>.
File content of '/home/the_user/.local/share/akonadi/akonadi_control.error':
Executable "akonadi_nepomuk_feeder" for agent "akonadi_nepomuk_feeder" could not be found!
Test 17: ERROR
Previous Akonadi control error log found.
Details: The Akonadi control process reported errors during its previous startup. The log can be found in <a href='/home/the_user/.local/share/akonadi/akonadi_control.error.old'>/home/the_user/.local/share/akonadi/akonadi_control.error.old</a>.
File content of '/home/the_user/.local/share/akonadi/akonadi_control.error.old':
Executable "akonadi_nepomuk_feeder" for agent "akonadi_nepomuk_feeder" could not be found!After Upload you can delete the Duplicates comparing the employee Id.
It Will be Possible only when you use OLE and read the file records line by Line. I am not sure of the error Handling with OLE control. It may lead to some performance issues..
Maybe you are looking for
-
i need help because itunes is not upgrading
-
Is there a maximum album cover size in Music app?
Is there a maximum album cover artwork size in the Music app? I've noticed that some albums - that I've scanned the covers for - will display the cover in iTunes but not on my iPhone, so I'm wondering whether there's a maximum filesize or maximum dim
-
IP over Firewire AND Ethernet connected cluster?
Does anyone have any experience with IP over Firewire and Qmaster? What I'm trying to do (for now) is to have a file server connected to a bunch of Firewire HD's, then that connected to two other macs via IP over Firewire, and all that be a cluster.
-
Opening new site in dreamweaver
I am trying to open a new site in dw but I already have an icon/folder for "desktop" under "Files". How can I delte it and only keep the new site folder? Thanks a lot.
-
Usage of Lexical Parameters in PL/SQL code
Hello Everyone, I am trying to use a query in the pl/sql code which has 9 parameters ( Earlier this query was used in a Report i.e. report6i , so we used the lexical parameter to handle the parameters). But according to our new requirement i have to