Error: "Numeric value entered was too low " -drill down discoverer report

Hi ,
We have created a Discoverer drill down report (drill down to another worksheet). We have two worksheets one for the master and and the other for the detail.The parameters are passed to detail sheet (The link information is set using the Manage links option in the Discoverer plus) from the master. This whole thing works fine in dev instance.
We imported the business area . Deleted the existing file and the opened the new .dis file from local computer and then saved it to db.
Now the master report runs fine and when we click on the drill down link for the detail we get the following error
An error occured while handling the event.See the application log for more details.
- The numerical value entered was too low."
However the link works fine in plus and desktop in the same instance.
Kindly help.
Thanks,
Shobana

I hope you're not using Internet Explorer v7.
It has a specific problem with Disco Viewer, is not certified to work with it, and the error is drilling in Viewer.
The Oracle bug (metalink) is: 5608740
This bug prevents the listing of drill items under the drill icon.
Russ

Similar Messages

Hellow my i pod is not working.actually bettry was too low then i puted on charging.it starting charging but not going to power on.when it tried to starting on sunndly after the apple logo it showd the 5 % bettry and went back off and this proses is carry

hellow
my i pod is not working.actually bettry was too low then i puted on charging.it starting charging but not going to power on.when it tried to starting on sunndly after the apple logo it showd the 5 % bettry and went back off and this proses is carry on.plz help me how it witt work starting.i urgently need to on my i pod.plz help me plzzzzzzzzzzzzzzzz

Hi there shehla sattar,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPad: Basic troubleshooting
http://support.apple.com/kb/ts3274
-Griff W.

Only Dimension Table Values in Combo Box or Drill Down Selections

Hi All,
How to get only Dimension Table Values instead of Master Data Values in Combo Box or Drill Down Box list of values?
I am getting all the values in 0CALMONTH Combo Box where i need only infoproviders values.
In Entry List tab of Combo Box when i select 0CALMONTH its reading from its Master Data.Is there any option how there is Dimension table in Value help.
In Query, infoobject levels the filter values selection is set as infoprovider only.
Can anyone please let me know how to get only dimension table values when we use combo box.
Thanks & Regards
K.Srinivas Rao

Hi
Create one BI query with only one object in the output of the query. (In your case 0CALMONTH)
So now if when you run the query it will show values which are there in infoprovider. THen drag one form from output of this query in vc & create dropdown list on this.
Is this what you are looking for?
regards
Sandeep

Drill down in report based on two queries

Hi,
I have a problem with drilling down in report which is based on two queries.
Queries are based on different universes.
Both queries contains almost the same dimensions but different measures.
In my report is a calculated measure based on measures from both queries.
In both universes are the same hierachies.
When I drill down in report for the first time I have to chose hierarchy but then data are filtered to the choosen value only from one query , data from second query are not filtered and the values of calculated measure are incorrect
How can I solve this issue without adding dimensions belonging to the hierarchies to queries.
Please help.
Regards.
MG

Hi MG,
First of all, what do you mean by "Both queries contains almost the same dimensions but different measures"
"Almost" is not a good word in the IT world, especially when trying to merge/join tables. You need to be exact.
That sounds like a possible reason for the problem.
I am also not sure about your question:
"How can I solve this issue without adding dimensions belonging to the hierarchies to queries."
You may have to add those dimensions to the queries. Why would you not want to?
Thanks

Unable to Drill Down for Report Designer

hellooo...I created a report using a query in Report Designer. My query is having a structure in the row and I'm using this query for the report in Report Designer. After I created this report in Report Designer, I assign this report in Web Application Designer and create a navigation pane to link this report for the drill down function. But I have problem on drill down this report in the web template when i click on this navigation pane for the free char i defined. Eg: when i drill down for the char in the free char under the navigation pane item, I cannot perform the drill down horizontally but can perform drill down vertically. After perform drill down, I don't see the values from that char being displayed in the reports. Just wondering report in report designer cannot have any drill down function? or is my query problem due to the structure i defined? thanks alotttt...

The report designer needs a fixed Column definition ( structures)
In case of drill across this requirement is not fullfilled.
This is not changable and is due to design, sorry.
so you can only drill down.
best regards,
Kai

Error Message - Value Entered Does Not Match Format of Field

I keep getting an error message in Adobe Pro X: "The value entered does not match the format of the field [JF13]".
I have JF13 programmed as follows:
On Calculate tab:
if(Number(this.getField("ck4").value) > 0) this.getField("JF13").value = Number(this.getField("FL019").value); else this.getField("JF13").value = " ";
It is programmed this way so if the user checks the check box before the field, only then will JF13 populate a value, which pulls from FL019. I also have the settings set to "number" because the data needs to display as a dollar amount $xxx.xx.
FL019 is a hidden field on the form which pulls a dollar amount from a Mainframe, and its settings are also set to "Number" :
I get four pop up windows with the above mentioned error message, and the only way to make the message stop is to remove the "number" format from the fields. However, when this is done, if any number which ends in a zero is entered, it cuts off the zero. This is not acceptable either.
Is there some sort of script I could add or some other way to prevent both the error message and the cutting off of the zero on JF13?
I am not very proficient with javascript, so any assistance would be appreciated!

Thank you so much for your response!!
Forgive me for my lack of knowledge - but where exactly would I add that in the script?
I tried it like this:
if(Number(this.getField("ck4").value) > 0) this.getField("JF13").value = Number(this.getField("FL019").value); else this.getField("JF13").value = ""(empty string);
And I got an error saying I was missing a parenthesis. Should it go somewhere else or am I completely off?

Bcp import error numeric value out of range

lo, I have table with columns of type int. I export this table by using bcp:
bcp dbo.int_table out file.dat -q -CRAW -T -S localhost -E .
Now I want to import it to table with columns of type bigint. I use bcp command:
bcp dbo.bigint_table in file.dat -q -CRAW -T -S localhost -E
I get error:
Error = [Microsoft][SQL Native Client]Numeric value out of range
SQLState = 22003, NativeError = 0
Error = [Microsoft][SQL Native Client]Numeric value out of range
SQLState = 22003, NativeError = 0
Error = [Microsoft][SQL Native Client]Numeric value out of range
SQLState = 22003, NativeError = 0
Error = [Microsoft][SQL Native Client]Numeric value out of range
SQLState = 22003, NativeError = 0
Error = [Microsoft][SQL Native Client]Numeric value out of range
SQLState = 22003, NativeError = 0
Error = [Microsoft][SQL Native Client]Numeric value out of range
SQLState = 22003, NativeError = 0
Error = [Microsoft][SQL Native Client]Numeric value out of range
SQLState = 22003, NativeError = 0
Error = [Microsoft][SQL Native Client]Numeric value out of range
SQLState = 22003, NativeError = 0
Error = [Microsoft][SQL Native Client]Numeric value out of range
SQLState = 22003, NativeError = 0
i was trying import table by using format file created based on bigint_table by command:
bcp dbo.bigint_table in file.dat -f format_file_bigint.xml -q -CRAW -T -S localhost -E
but i also gets the same errors.
Can I use format file when during export was used -CRAW option????

int table:
CREATE TABLE [INT_TABLE](
   [ID] [int] IDENTITY(1,1) NOT NULL,
   [COL1] [int] NOT NULL,
    [COL2] [datetime] NOT NULL,
   [COL3] [datetime] NOT NULL,
   [COL4] [datetime] NOT NULL,
    [COL5] [datetime] NOT NULL,
   [COL6] [bit] NOT NULL,
   [COL7] [bit] NOT NULL,
   [COL8] [numeric(15,2)] NOT NULL,
   [COL7] [numeric(15,2)] NOT NULL,
   [COL8] [numeric(15,2)] NOT NULL,
   [COL9] [int] NOT NULL,
   [COL10] [int] NOT NULL,
   [COL11] [datetime] NULL
big int table:
CREATE TABLE [BIGINT_TABLE](
   [ID] [int] IDENTITY(1,1) NOT NULL,
   [COL1] [int] NOT NULL,
    [COL2] [datetime] NOT NULL,
   [COL3] [datetime] NOT NULL,
   [COL4] [datetime] NOT NULL,
    [COL5] [datetime] NOT NULL,
   [COL6] [bit] NOT NULL,
   [COL7] [bit] NOT NULL,
   [COL8] [numeric(15,2)] NOT NULL,
   [COL7] [numeric(15,2)] NOT NULL,
   [COL8] [numeric(15,2)] NOT NULL,
   [COL9] [bigint] NOT NULL,
   [COL10] [bigint] NOT NULL,
   [COL11] [datetime] NULL
The int table was exported by bcp command:
bcp int_table out 'c:\int_table.dat' -q -N -T -C RAW -S localhost
and i try import it by command:
bcp bigint_table in 'c:\int_table.dat' -T -C RAW -q -S localhost -E
then i get this errors:
Error = [Microsoft][SQL Native Client]Numeric value out of range
SQLState = 22003, NativeError = 0
Error = [Microsoft][SQL Native Client]Numeric value out of range
SQLState = 22003, NativeError = 0
Error = [Microsoft][SQL Native Client]Numeric value out of range
SQLState = 22003, NativeError = 0
Error = [Microsoft][SQL Native Client]Numeric value out of range
SQLState = 22003, NativeError = 0
Error = [Microsoft][SQL Native Client]Numeric value out of range
SQLState = 22003, NativeError = 0
Error = [Microsoft][SQL Native Client]Numeric value out of range
SQLState = 22003, NativeError = 0
Error = [Microsoft][SQL Native Client]Numeric value out of range
SQLState = 22003, NativeError = 0
Error = [Microsoft][SQL Native Client]Numeric value out of range
SQLState = 22003, NativeError = 0
Error = [Microsoft][SQL Native Client]Numeric value out of range
SQLState = 22003, NativeError = 0

Error: Numeric underflow: double literal too small.

Hi!
For some reason from the line...
private static final double TIME_TO_PAINT_DIALOG = 0.050;
... I get error mentioned in the subject field. My Java version is: "Java(TM) 2 Runtime Environment, Standard Edition (build 1.3.1-b24)".
Could someone please tell me what�s wrong!!??
/jasurakka

>
I�m not quite sure what do you mean... On the line 75
there is:
private static final double TIME_TO_PAINT_DIALOG =
0.050;
And when I compile, I get the error:
Error:
Y:\nemu_em\src\com\nokia\em\applauncher\ThinClient\cli
nt\login\Installer.java(75): Numeric underflow: double
literal too small.
What else do you need...?It helps to know that it is a compile error.
Remove every other line in the class except for that one and compile it again.
Compile it using the command line tools and not as part of any other application (like an ide or as part of a web installer.)

Automatic calculation of numeric value enter in Survey

while creating Survey in Survey Suit we enetr numeric value in field .
my requirement is that can we do automatic calculation of these numeric
values in Survey its self
Regards,
Anup Reche
9268133864

Hi Anup,
Check if the following links help you:
/people/gregor.wolf3/blog/2006/07/22/create-run-and-analyze-an-e-mail-campaign-with-a-survey-part-1
/people/gregor.wolf3/blog/2006/05/11/advanced-campaign-automation-in-mysap-crm-40-teaser
http://help.sap.com/saphelp_nw04/helpdata/en/02/739fe7a80746caa668958d558993ae/frameset.htm
Hope this helps!
Regards,
Saumya

Error in Drilled down ALV Report.

Hi all
i am creating a single level drilled down report , in that in the first screen i am displaying the header detials , in the second level i am displaying the item detial of the particular line..
While processing the second level i am getting a dump like
A PERFORM was used to call the routine "USER_COMMAND" of the program
"SAPLSLVC_FULLSCREEN".
This routine contains exactly 1 formal parameters, but the current
call contains 2 actual parameters.
parameters.
here is my code :
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM.
CASE R_UCOMM.
WHEN '&IC1'.
PERFORM BUILD_CATALOG_EKPO.
PERFORM EVENT_EKPO.
PERFORM POPULATE_EVENT_EKPO.
PERFORM DATA_EKPO.
PERFORM BUILD_LIST.
PERFORM DISPLAY_EKPO.
ENDCASE.
ENDFORM.
*&      Form BUILD_CATALOG_EKPO
      text
--> p1        text
<-- p2        text
FORM BUILD_CATALOG_EKPO .
WA_FIELDCAT-TABNAME = 'ITAB_EKPO'.
WA_FIELDCAT-FIELDNAME = 'EBELN'.
WA_FIELDCAT-SELTEXT_M = 'PO NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'ITAB_EKPO'.
WA_FIELDCAT-FIELDNAME = 'EBELP'.
WA_FIELDCAT-SELTEXT_M = 'Item No.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
    WA_FIELDCAT-TABNAME = 'ITAB_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MATNR'.
WA_FIELDCAT-SELTEXT_M = 'Material NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
    WA_FIELDCAT-TABNAME = 'ITAB_EKPO'.
WA_FIELDCAT-FIELDNAME = 'WERKS'.
WA_FIELDCAT-SELTEXT_M = 'PLANT.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
    WA_FIELDCAT-TABNAME = 'ITAB_EKPO'.
WA_FIELDCAT-FIELDNAME = 'LGORT'.
WA_FIELDCAT-SELTEXT_M = 'Storage Loc.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
    WA_FIELDCAT-TABNAME = 'ITAB_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MENGE'.
WA_FIELDCAT-SELTEXT_M = 'Quantity.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
    WA_FIELDCAT-TABNAME = 'ITAB_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MEINS'.
WA_FIELDCAT-SELTEXT_M = 'UNIT.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM.                    " BUILD_CATALOG_EKPO
*&      Form EVENT_EKPO
      text
--> p1        text
<-- p2        text
FORM EVENT_EKPO .
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE           = 0
IMPORTING
   ET_EVENTS             = V_EVENTS
EXCEPTIONS
LIST_TYPE_WRONG       = 1
OTHERS                = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " EVENT_EKPO
*&      Form POPULATE_EVENT_EKPO
      text
--> p1        text
<-- p2        text
FORM POPULATE_EVENT_EKPO .
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'TOP_OF_PAGE'.
IF SY-SUBRC EQ 0.
WA_EVENT-FORM = 'TOP_OF_PAGE'.
MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME = WA_EVENT-FORM.
ENDIF.
ENDFORM.                    " POPULATE_EVENT_EKPO
FORM F_TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      IT_LIST_COMMENTARY       = IT_LISTHEADER
   i_logo                   =
   I_END_OF_LIST_GRID       =
ENDFORM.
*&      Form DATA_EKPO
      text
--> p1        text
<-- p2        text
FORM DATA_EKPO .
DATA:RS_SELFIELD TYPE SLIS_SELFIELD.
READ TABLE ITAB_EKKO INTO WA_EKKO INDEX RS_SELFIELD-TABINDEX.
SELECT EBELN EBELP MATNR WERKS LGORT MENGE MEINS
FROM EKPO
INTO CORRESPONDING FIELDS OF TABLE ITAB_EKPO
WHERE EBELN = WA_EKKO-EBELN.
DATA :ID_ITEM_COLOR.
LOOP AT ITAB_EKPO INTO WA_EKPO.
ID_ITEM_COLOR = ID_ITEM_COLOR + 1.
IF ID_ITEM_COLOR = 8.
   ID_ITEM_COLOR = 1.
ENDIF.
CONCATENATE 'C' ID_ITEM_COLOR '10' INTO WA_EKPO-LINE_COLOR_ITEM.
MODIFY ITAB_EKPO FROM WA_EKPO TRANSPORTING LINE_COLOR_ITEM.
ENDLOOP.
ENDFORM.                    " DATA_EKPO
*&      Form DISPLAY_EKPO
      text
--> p1        text
<-- p2        text
FORM DISPLAY_EKPO .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK                 = ' '
I_BYPASSING_BUFFER                = ' '
I_BUFFER_ACTIVE                   = ' '
   I_CALLBACK_PROGRAM                 = V_REPID
I_CALLBACK_PF_STATUS_SET          = ' '
I_CALLBACK_USER_COMMAND           = 'USER_COMMAND '
I_CALLBACK_TOP_OF_PAGE            = 'TOP_OF_PAGE'
I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
I_CALLBACK_HTML_END_OF_LIST       = ' '
I_STRUCTURE_NAME                  =
I_BACKGROUND_ID                   = ' '
   I_GRID_TITLE                      = I_TITLE_EKPO
I_GRID_SETTINGS                   =
IS_LAYOUT                         =
   IT_FIELDCAT                       = I_FIELDCAT[]
IT_EXCLUDING                      =
IT_SPECIAL_GROUPS                 =
IT_SORT                           =
IT_FILTER                         =
IS_SEL_HIDE                       =
I_DEFAULT                         = 'X'
I_SAVE                            = ' '
IS_VARIANT                        =
   IT_EVENTS                         = V_EVENTS
IT_EVENT_EXIT                     =
IS_PRINT                          =
IS_REPREP_ID                      =
I_SCREEN_START_COLUMN             = 0
I_SCREEN_START_LINE               = 0
I_SCREEN_END_COLUMN               = 0
I_SCREEN_END_LINE                 = 0
IT_ALV_GRAPHICS                   =
IT_HYPERLINK                      =
IT_ADD_FIELDCAT                   =
IT_EXCEPT_QINFO                   =
I_HTML_HEIGHT_TOP                 =
I_HTML_HEIGHT_END                 =
IMPORTING
E_EXIT_CAUSED_BY_CALLER           =
ES_EXIT_CAUSED_BY_USER            =
TABLES
    T_OUTTAB                          = ITAB_EKPO
EXCEPTIONS
PROGRAM_ERROR                     = 1
OTHERS                            = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " DISPLAY_EKPO
*&      Form BUILD_LIST
      text
--> p1        text
<-- p2        text
FORM BUILD_LIST .
gd_layout-no_input          = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text       = 'Totals'(201).
Set layout field for row attributes(i.e. color)
gd_layout-info_fieldname =      ' LINE_COLOR_ITEM'.
ENDFORM.                    " BUILD_LIST
Arun Joseph

The form USER_COMMAND should have 2 changing/actual parameters which is standard.
Ex:
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
ENDFORM.

Layout problem for Drill down ALV Report

Hello Everyone,
                       I have developed a ALV drill down report using the method G_GRID->SET_TABLE_FOR_FIRST_DISPLAY. The problem is what ever layout i save for the primary list 'Screen 100' is effecting my secondary list 'Screen 200'. User need to save both Screen 100 and Screen 200 layouts independently without affecting each other.
I am calling screen 100 as below,
Call metthod g_grid_100->set_table_for_first_display
Exporting
   i_Save                                     = 'A'
   is_layout                                 = ls_layout
   is_Variant                                =   ls_Variant
Changing
   it_outtab                                  = ct_poitems
   it_fieldcatalog                           = lt_fieldcat
Exceptions
   Invalid_parameter_combimation   = 1
   Program_error                            = 2
   too_many_lines                         = 3
   others                                       = 4.
Could any body suggest me a way to do this..
Thanks in advance.
Regards,
Shyam.

Hi,
Use multiple Layout structure (each alv have its own structure) .
Note the use of disvariant-log_group .
DATA: gs_disvariant_1 TYPE disvariant ,
           gs_disvariant_2 TYPE disvariant .
* Layout-Logical groups
CONSTANTS: gc_log_group_1 TYPE disvariant-log_group VALUE 'ALV1' ,
                        gc_log_group_2 TYPE disvariant-log_group VALUE 'ALV2' .
INITIALIZATION.
PERFORM at_initialization .
FORM at_initialization .
DATA: vari TYPE disvariant-variant .
PERFORM alv_variant_get_default USING gc_log_group_1 CHANGING gs_disvariant_1 vari .
PERFORM alv_variant_get_default USING gc_log_group_2 CHANGING gs_disvariant_2 vari .
ENDFORM.
FORM alv_variant_get_default
USING
    log_group TYPE disvariant-log_group
CHANGING
    disvariant TYPE disvariant
    variant    TYPE slis_vari .
DATA: ls_disvariant TYPE disvariant.
ls_disvariant-report = sy-repid .
ls_disvariant-log_group = log_group .
disvariant = ls_disvariant.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
    EXPORTING
      i_save     = 'A'
    CHANGING
      cs_variant = ls_disvariant
    EXCEPTIONS
      not_found = 2.
IF sy-subrc = 0.
    disvariant = ls_disvariant.
    variant    = ls_disvariant-variant .
ENDIF.
ENDFORM.                    "alv_variant_get_default
Later....
   CALL METHOD gui_alv_grid_1->set_table_for_first_display
      EXPORTING
        is_layout       = wa_layout
        is_print        = wa_print
        i_save          = 'A'
        is_variant      = gs_disvariant_1
      CHANGING
        it_sort         = it_sort
        it_fieldcatalog = it_fieldcatalog
        it_outtab       = it_alv_grid_1.
CALL METHOD gui_alv_grid_2->set_table_for_first_display
      EXPORTING
        is_layout       = wa_layout
        is_print        = wa_print
        i_save          = 'A'
        is_variant      = gs_disvariant_2
      CHANGING
        it_sort         = it_sort
        it_fieldcatalog = it_fieldcatalog
        it_outtab       = it_alv_grid_2.
Regards.

Drill Down in Report Designer

Hi to all,
I have create query in query designer with drill down, but when i format my query in Report Designer and execute it, it is not showing drill down.
can i show drilll down in Report Designer when executed.
If yes, How to do that.
I shall be thankfull to you for this.
Reagrds
Pavneet Rana

Hello,
Because BEx Reports are optimized for presentation and printing, the drill down cannot be changed (you can set filter values only). If you want to navigate within the data on the Web, use the BEx Web Analyzer or create a Web Application using a Web item analysis.
A dynamic section is based on a data provider thet contains a key figure in the columns and one more characteristics in the drill down od the rows.
Regards,
Edited by: Subbu_Amar on Oct 27, 2010 8:35 AM

Drill down on report s_alr_87012999

Hi,
I'm having trouble tracing a drilldown problem on order reports such as S_ALR_87012999. When drilling down on plan line items an error message saying "No plan line items were selected" appears, yet there is a total against the account code, suggesting there is data there. An authorization check doesn't return any problems. Am I missing anything else?
thanks

Ian,
Are you using ST01 for the auth trace?
Reading the error message, it did not sound like an authorization error message to me. One way you can rule out whether this is an authorization problem or not, assign the test uid with SAP_ALL , and run the report to see if the error still persists. So you don't waste time on non-security error.
Hope this help.
Regards,
Lye

Drill down in reports

Hi,
when I want to work with drill downs is this only possible with using hierarchies for the neccessary characteristics?
I'm working with SAP BW 3.5 and 7.
Thanks in advance.
Edited by: saplaz on Jun 23, 2010 11:11 PM

The report shows for example:
Risk class 1 customerX 500 Dollar
                    customerY 300 Dollar
                    customerZ 200 Dollar
                    Sum 1000
after drill down
Risk class 1.1 customerX 500 Dollar
Sum 500
Risk class 1.2 customerY 300 Dollar
Sum 300
Risk class 1.3 customerZ 200 Dollar
Sum 200
The thing is that I only want to see one row with the risk class like that:
Risk class 1 1000 Dollar
after the drill down the other rows should appear
Rc 1.1 customerX 500 Dollar
Rc 1.2 customerY 300 Dollar
Rc 1.3 customerZ 200 Dollar
Any ideas how this could be done?

Drill down in report

I am looking to add some drill down functionality in one of my reports. Does anyone have an references (books, tutorials, or otherwise) that could provide an example. I'm running Reports 9i. TIA.

Hi,
One example you could look at is "Parameter form JSP".
http://otn.oracle.com/products/reports/htdocs/getstart/examples/index.html
In the example, you can search for customet name (eg, s%), then from the customer list you select one in order to view all its orders.
If you want to use the paper layout and output to HTML / HTMLCSS, in that case you can use the Hyperlinks property to create drill-down. You can look at "Building Reports" manual section 2.2.6 for information on Hyperlinks. Create a master report with hyperlinks, and in each hyperlink you can pass the full report command for the detail report with the relevant master infromation, eg, the customer_id or the department_id.
http://otn.oracle.com/documentation/reports.html
Navneet.

Error: "Numeric value entered was too low " -drill down discoverer report

Similar Messages

Maybe you are looking for