Unable to Drill Down for Report Designer

hellooo...I created a report using a query in Report Designer. My query is having a structure in the row and I'm using this query for the report in Report Designer. After I created this report in Report Designer, I assign this report in Web Application Designer and create a navigation pane to link this report for the drill down function. But I have problem on drill down this report in the web template when i click on this navigation pane for the free char i defined. Eg: when i drill down for the char in the free char under the navigation pane item, I cannot perform the drill down horizontally but can perform drill down vertically. After perform drill down, I don't see the values from that char being displayed in the reports. Just wondering report in report designer cannot have any drill down function? or is my query problem due to the structure i defined? thanks alotttt...

The report designer needs a fixed Column definition ( structures)
In case of drill across this requirement is not fullfilled.
This is not changable and is due to design, sorry.
so you can only drill down.
best regards,
Kai

Similar Messages

Drill Down in Report Designer

Hi to all,
I have create query in query designer with drill down, but when i format my query in Report Designer and execute it, it is not showing drill down.
can i show drilll down in Report Designer when executed.
If yes, How to do that.
I shall be thankfull to you for this.
Reagrds
Pavneet Rana

Hello,
Because BEx Reports are optimized for presentation and printing, the drill down cannot be changed (you can set filter values only). If you want to navigate within the data on the Web, use the BEx Web Analyzer or create a Web Application using a Web item analysis.
A dynamic section is based on a data provider thet contains a key figure in the columns and one more characteristics in the drill down od the rows.
Regards,
Edited by: Subbu_Amar on Oct 27, 2010 8:35 AM

Unable to utilize Drill-Down for all Filtered Dates in Xcelsius Engage 2008

Iu2019m very new to the Xcelsius Engage 2008 product and donu2019t understand what is needed to correct the drill-down problem encountered in a newly created dashboard.
The issue is with Drill-Down from a filtered chart. For some reason, I am unable to correctly pick any data item from the chart located top of workspace to drill-down to the lower chart when selecting a month beyond Jan u201911.
Iu2019ve unhidden the Label Based Menu, List Box 1 and List Box 2 during attempt to find out why I am unable to drill-down when I select a month other than Jan u201911. As youu2019ll see, when you u2018manuallyu2019 click in the unhidden List Box 2, the bottom chart is displaying the correct data.
Also - new to post for this forum - is there a way to attached the XLF to help with visual support to the problem?
Thank you,
Deborah

Hi there and welcome.
First troubleshooting step is to add a spreadsheet component to your canvas so you can watch what's happening. Second, have a look at this step-by-step to make sure you're not missing any steps. http://blog.davidg.com.au/2011/04/xcelsius-interactivity-chart-drill-down.html
Can you select only Jan '11? Or only up to Jan '11? Are you selecting whole months or days?
Assuming that your second chart is filtering for this date, I would check that the formatting is correct. Try, for example, removing all formatting so that you're seeing 40668 instead of a date. Does that work?
Also, it can be helpful to post your version number. This can be found under Help > About Xcelsius and will something like 5.3.5.0

Drill down in report based on two queries

Hi,
I have a problem with drilling down in report which is based on two queries.
Queries are based on different universes.
Both queries contains almost the same dimensions but different measures.
In my report is a calculated measure based on measures from both queries.
In both universes are the same hierachies.
When I drill down in report for the first time I have to chose hierarchy but then data are filtered to the choosen value only from one query , data from second query are not filtered and the values of calculated measure are incorrect
How can I solve this issue without adding dimensions belonging to the hierarchies to queries.
Please help.
Regards.
MG

Hi MG,
First of all, what do you mean by "Both queries contains almost the same dimensions but different measures"
"Almost" is not a good word in the IT world, especially when trying to merge/join tables. You need to be exact.
That sounds like a possible reason for the problem.
I am also not sure about your question:
"How can I solve this issue without adding dimensions belonging to the hierarchies to queries."
You may have to add those dimensions to the queries. Why would you not want to?
Thanks

Hi all can anyone send docs for Report Designer bi7.0

hi all,
Can anyone send me the documents for report designer bi 7.0.
regds
hari

hi hari,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/910aa7a7-0b01-0010-97a5-f28be23697d3
http://help.sap.com/saphelp_nw2004s/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4487dd91-0b01-0010-eba1-bcd6419
/people/michael.eacrett/blog/2006/06/07/whats-new-in-sap-netweaver-702004s--an-introduction-to-the-functionality-deltas-and-major-changes
http://searchsap.techtarget.com/cgi-bin/rd.pl/ftID-1121728-ctID-1064004?//expert/KnowledgebaseAnswer/0,289625,sid21_gci1064004,00.html
http://help.sap.com/saphelp_nw04s/helpdata/en/9d/24ff4009b8f223e10000000a155106/content.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10564d5c-cf00-2a10-7b87-c94e38267742
http://wiki.ittoolbox.com/index.php/Upgrade_BW_to_Netweaver_2004s_from_v3.0B
http://help.sap.com/saphelp_nw70/helpdata/en/88/4d354277dcb26be10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5c46376d-0601-0010-83bf-c4f5f140e3d6
http://help.sap.com/saphelp_nw2004s/helpdata/en/a4/1be541f321c717e10000000a155106/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/b3/05154219fce12ce10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/b3/05154219fce12ce10000000a1550b0/frameset.htm
hope this helps..

T code for report designer

Hi ,
Please let me know the t code for report designer.
Regards
siddartha

Hi
There is no direct Tcode to Query Designer / Report Designer .. You need to go Start -- Programs -- Bex
You can use Tcode RRMX to reach Query Analyzer.

Drill down for infotypes

Hi,
I made a select-option for the field PA0290-PASSL,
but, but i noticed that i couldn't drill down to the table contents of the pa0290-passl. I thought maybe it has something to do with the table being an infotype. Because the select-option works fine for transparent tables like MARA. Are there any way for me to make a drill down for an infotype table such as the one i mentioned above?
Thanks,
Frank

Hi,
You can use the following code for providing F4help.
types: begin of ty_PASSL,
PASSL type PA0290-PASSL,
end of ty_passl.
data: i_passl type table of ty_passl.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR PASSL.
Select PASSL from PA0290 into table i_PASSL where .....
w_repid = sy-repid.
w_dynnr = sy-dynnr.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'PASSL'
dynpprog = w_repid
dynpnr = w_dynnr
dynprofield = 'PASSL'
value_org = 'S'
TABLES
value_tab = i_PASSL.
IF sy-subrc 0.
ENDIF.
Reward points if helpful.
Thanks and Regards.

IDA ALV - different behavior regarding "drill-down" for grouped attributes after upgrade to ERP 6.0 EHP7 SPS5

Hello Experts,
we have upgraded our Dev System to ERP 6.0 EHP 7 SPS5 (coming from SPS4).
We had implement an example with an IDA ALV. On SPS4 we could make a "drill-down" to the single lines of grouped attributes. Now with SPS5 this is not possible anymore if the grouping is done for more than one attribute.
On the following screenshot it scan be seen that the grouping is done over a Peril attribute and the Currency. I can only make a drill-down via the peril attribute, so that the aggregated values per currency are displayed. ON SPS4 it was possible to make a further drill-down for the currency attribute, so that the different single lines were visible which were part of the grouping/aggregation.
SPS5 behavior:
SPS4 behavior:
I did not found any new settings which steers the behavior. Also I did not found any note which gives a hint that this is a bug.
Does anyone know if the behavior for that was changed and why?
Thx & Best regards,
Florian

Hi Florian,
it is related with the currency field and it seems to be a bug. Please open a ticket to get the problem fixed. The component is BC-WD-CMP-ALV.
Cheers
Jens

Unable to drill down and see the options in DBACOCKPIT

Hi All;
I am unable to drill down any of the options in DBA COCKPIT.i am able to view st03,st04 and database backup is fine even in db13.Let me know what can be done to to do configuration of DBA COCKPIT and if i click configuration am unable to do anything with active and inactive systems
Below is the error am getting::
Object CL_DB6_SYS: Method call GET_FIRST_AVAILABLE_SYSTEM failed with return code = System not found.
Message no. DB6PM001
Regards
Ram

Hi, Make sure you have the latest DBA Cockpit Collection version installed via transaction => snote.
1456402 DBA Cockpit Correction Collection SAP Basis 7.02 / 7.30
regards

Layout problem for Drill down ALV Report

Hello Everyone,
                       I have developed a ALV drill down report using the method G_GRID->SET_TABLE_FOR_FIRST_DISPLAY. The problem is what ever layout i save for the primary list 'Screen 100' is effecting my secondary list 'Screen 200'. User need to save both Screen 100 and Screen 200 layouts independently without affecting each other.
I am calling screen 100 as below,
Call metthod g_grid_100->set_table_for_first_display
Exporting
   i_Save                                     = 'A'
   is_layout                                 = ls_layout
   is_Variant                                =   ls_Variant
Changing
   it_outtab                                  = ct_poitems
   it_fieldcatalog                           = lt_fieldcat
Exceptions
   Invalid_parameter_combimation   = 1
   Program_error                            = 2
   too_many_lines                         = 3
   others                                       = 4.
Could any body suggest me a way to do this..
Thanks in advance.
Regards,
Shyam.

Hi,
Use multiple Layout structure (each alv have its own structure) .
Note the use of disvariant-log_group .
DATA: gs_disvariant_1 TYPE disvariant ,
           gs_disvariant_2 TYPE disvariant .
* Layout-Logical groups
CONSTANTS: gc_log_group_1 TYPE disvariant-log_group VALUE 'ALV1' ,
                        gc_log_group_2 TYPE disvariant-log_group VALUE 'ALV2' .
INITIALIZATION.
PERFORM at_initialization .
FORM at_initialization .
DATA: vari TYPE disvariant-variant .
PERFORM alv_variant_get_default USING gc_log_group_1 CHANGING gs_disvariant_1 vari .
PERFORM alv_variant_get_default USING gc_log_group_2 CHANGING gs_disvariant_2 vari .
ENDFORM.
FORM alv_variant_get_default
USING
    log_group TYPE disvariant-log_group
CHANGING
    disvariant TYPE disvariant
    variant    TYPE slis_vari .
DATA: ls_disvariant TYPE disvariant.
ls_disvariant-report = sy-repid .
ls_disvariant-log_group = log_group .
disvariant = ls_disvariant.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
    EXPORTING
      i_save     = 'A'
    CHANGING
      cs_variant = ls_disvariant
    EXCEPTIONS
      not_found = 2.
IF sy-subrc = 0.
    disvariant = ls_disvariant.
    variant    = ls_disvariant-variant .
ENDIF.
ENDFORM.                    "alv_variant_get_default
Later....
   CALL METHOD gui_alv_grid_1->set_table_for_first_display
      EXPORTING
        is_layout       = wa_layout
        is_print        = wa_print
        i_save          = 'A'
        is_variant      = gs_disvariant_1
      CHANGING
        it_sort         = it_sort
        it_fieldcatalog = it_fieldcatalog
        it_outtab       = it_alv_grid_1.
CALL METHOD gui_alv_grid_2->set_table_for_first_display
      EXPORTING
        is_layout       = wa_layout
        is_print        = wa_print
        i_save          = 'A'
        is_variant      = gs_disvariant_2
      CHANGING
        it_sort         = it_sort
        it_fieldcatalog = it_fieldcatalog
        it_outtab       = it_alv_grid_2.
Regards.

Drill Down for Map reports

Hi All,
I have a requirement in which i need a create a sales map report across all the states in NA.
i have created a main map report using the default map gallery and displayed all the sales figures across all the states in NA. Now i want to show the City level sales when i click on a particular state. The state on which i am going to click
should enlarge (or) it should redirect to other report having the particular statemap with city related values on it.
How can i do it please help..!
Do i need to download all the local statemaps and how do i store those maps in SQL server DB. Please explain in detail.
Thnaks in Advance..!
Regards,
Balaji Prasad B
Balaji - BI Developer

Hi Balaji Prasad,
According to your description, you create a state level map. When clicking on a particular state on the map, you want to display corresponding city level map.
In this scenario, we should import state and city level shapefiles into the database, then create maps with these spatial data. After that, we should click on the state map and select Polygon Properties to create a drill down report and specify state as
parameter to run the city map. For detail information, please refer to this article:
Drill down in SSRS Map Reports.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Drop down/drill down for the report

HI I have a requirement to have a kind of drop down menu on the heading level. So that if the data is say sales by model, on the invoice_date column, the user would have the option to look at this weeks' invoices, this months, etc.
I know there are Parameters up front to do this but they want this kind of drill down style.
Is there a way to do this in CR or via one of the add on products?

Hi
Apply record selection formula.
Create a formula field to display specific name for month, week etc.
Apply a group on this formula field.
Regards
Sourashree

How do I create a drill down for my summary data?

I have 7 fields of summary data with all having a common link called the customer account number.
I have tried the following steps several time carefully and was unable to get my drill down to work.
Insert menu > Group and chose the customer account number as my group field
copy and paste the summary fields to the group header ( which I now have hundreds of GH1)
Right click on the details section and chose Hide.
Suppress the Group Footer
File Menu > Report options and check on Show All Headers on Drill Down.
I must be missing a step somewhere here. I end up with no summary fields showing (to drill down into), and the customer account numbers showing.
Can some check this out for me?

hi Michael,
you need a group to have drill down. you can't drill down on a report footer. if you can't group by these categories then you can't have drill down.
your other option is to create an on demand subreport that you can open. i would suggest that you go through a bunch of the e-learning tutorials on crystal reports here. after that go to the online help for crystal reports and use the search tab and search for "creating an on demand subreport"
you'd need to create an on demand subreport for each total that you are showing. again, please see the elearning topics especially on subreports, grouping. and then do follow the steps on on demand subreports in the online help.
-jamie

Error in Drilled down ALV Report.

Hi all
i am creating a single level drilled down report , in that in the first screen i am displaying the header detials , in the second level i am displaying the item detial of the particular line..
While processing the second level i am getting a dump like
A PERFORM was used to call the routine "USER_COMMAND" of the program
"SAPLSLVC_FULLSCREEN".
This routine contains exactly 1 formal parameters, but the current
call contains 2 actual parameters.
parameters.
here is my code :
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM.
CASE R_UCOMM.
WHEN '&IC1'.
PERFORM BUILD_CATALOG_EKPO.
PERFORM EVENT_EKPO.
PERFORM POPULATE_EVENT_EKPO.
PERFORM DATA_EKPO.
PERFORM BUILD_LIST.
PERFORM DISPLAY_EKPO.
ENDCASE.
ENDFORM.
*&      Form BUILD_CATALOG_EKPO
      text
--> p1        text
<-- p2        text
FORM BUILD_CATALOG_EKPO .
WA_FIELDCAT-TABNAME = 'ITAB_EKPO'.
WA_FIELDCAT-FIELDNAME = 'EBELN'.
WA_FIELDCAT-SELTEXT_M = 'PO NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'ITAB_EKPO'.
WA_FIELDCAT-FIELDNAME = 'EBELP'.
WA_FIELDCAT-SELTEXT_M = 'Item No.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
    WA_FIELDCAT-TABNAME = 'ITAB_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MATNR'.
WA_FIELDCAT-SELTEXT_M = 'Material NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
    WA_FIELDCAT-TABNAME = 'ITAB_EKPO'.
WA_FIELDCAT-FIELDNAME = 'WERKS'.
WA_FIELDCAT-SELTEXT_M = 'PLANT.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
    WA_FIELDCAT-TABNAME = 'ITAB_EKPO'.
WA_FIELDCAT-FIELDNAME = 'LGORT'.
WA_FIELDCAT-SELTEXT_M = 'Storage Loc.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
    WA_FIELDCAT-TABNAME = 'ITAB_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MENGE'.
WA_FIELDCAT-SELTEXT_M = 'Quantity.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
    WA_FIELDCAT-TABNAME = 'ITAB_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MEINS'.
WA_FIELDCAT-SELTEXT_M = 'UNIT.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM.                    " BUILD_CATALOG_EKPO
*&      Form EVENT_EKPO
      text
--> p1        text
<-- p2        text
FORM EVENT_EKPO .
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE           = 0
IMPORTING
   ET_EVENTS             = V_EVENTS
EXCEPTIONS
LIST_TYPE_WRONG       = 1
OTHERS                = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " EVENT_EKPO
*&      Form POPULATE_EVENT_EKPO
      text
--> p1        text
<-- p2        text
FORM POPULATE_EVENT_EKPO .
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'TOP_OF_PAGE'.
IF SY-SUBRC EQ 0.
WA_EVENT-FORM = 'TOP_OF_PAGE'.
MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME = WA_EVENT-FORM.
ENDIF.
ENDFORM.                    " POPULATE_EVENT_EKPO
FORM F_TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      IT_LIST_COMMENTARY       = IT_LISTHEADER
   i_logo                   =
   I_END_OF_LIST_GRID       =
ENDFORM.
*&      Form DATA_EKPO
      text
--> p1        text
<-- p2        text
FORM DATA_EKPO .
DATA:RS_SELFIELD TYPE SLIS_SELFIELD.
READ TABLE ITAB_EKKO INTO WA_EKKO INDEX RS_SELFIELD-TABINDEX.
SELECT EBELN EBELP MATNR WERKS LGORT MENGE MEINS
FROM EKPO
INTO CORRESPONDING FIELDS OF TABLE ITAB_EKPO
WHERE EBELN = WA_EKKO-EBELN.
DATA :ID_ITEM_COLOR.
LOOP AT ITAB_EKPO INTO WA_EKPO.
ID_ITEM_COLOR = ID_ITEM_COLOR + 1.
IF ID_ITEM_COLOR = 8.
   ID_ITEM_COLOR = 1.
ENDIF.
CONCATENATE 'C' ID_ITEM_COLOR '10' INTO WA_EKPO-LINE_COLOR_ITEM.
MODIFY ITAB_EKPO FROM WA_EKPO TRANSPORTING LINE_COLOR_ITEM.
ENDLOOP.
ENDFORM.                    " DATA_EKPO
*&      Form DISPLAY_EKPO
      text
--> p1        text
<-- p2        text
FORM DISPLAY_EKPO .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK                 = ' '
I_BYPASSING_BUFFER                = ' '
I_BUFFER_ACTIVE                   = ' '
   I_CALLBACK_PROGRAM                 = V_REPID
I_CALLBACK_PF_STATUS_SET          = ' '
I_CALLBACK_USER_COMMAND           = 'USER_COMMAND '
I_CALLBACK_TOP_OF_PAGE            = 'TOP_OF_PAGE'
I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
I_CALLBACK_HTML_END_OF_LIST       = ' '
I_STRUCTURE_NAME                  =
I_BACKGROUND_ID                   = ' '
   I_GRID_TITLE                      = I_TITLE_EKPO
I_GRID_SETTINGS                   =
IS_LAYOUT                         =
   IT_FIELDCAT                       = I_FIELDCAT[]
IT_EXCLUDING                      =
IT_SPECIAL_GROUPS                 =
IT_SORT                           =
IT_FILTER                         =
IS_SEL_HIDE                       =
I_DEFAULT                         = 'X'
I_SAVE                            = ' '
IS_VARIANT                        =
   IT_EVENTS                         = V_EVENTS
IT_EVENT_EXIT                     =
IS_PRINT                          =
IS_REPREP_ID                      =
I_SCREEN_START_COLUMN             = 0
I_SCREEN_START_LINE               = 0
I_SCREEN_END_COLUMN               = 0
I_SCREEN_END_LINE                 = 0
IT_ALV_GRAPHICS                   =
IT_HYPERLINK                      =
IT_ADD_FIELDCAT                   =
IT_EXCEPT_QINFO                   =
I_HTML_HEIGHT_TOP                 =
I_HTML_HEIGHT_END                 =
IMPORTING
E_EXIT_CAUSED_BY_CALLER           =
ES_EXIT_CAUSED_BY_USER            =
TABLES
    T_OUTTAB                          = ITAB_EKPO
EXCEPTIONS
PROGRAM_ERROR                     = 1
OTHERS                            = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " DISPLAY_EKPO
*&      Form BUILD_LIST
      text
--> p1        text
<-- p2        text
FORM BUILD_LIST .
gd_layout-no_input          = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text       = 'Totals'(201).
Set layout field for row attributes(i.e. color)
gd_layout-info_fieldname =      ' LINE_COLOR_ITEM'.
ENDFORM.                    " BUILD_LIST
Arun Joseph

The form USER_COMMAND should have 2 changing/actual parameters which is standard.
Ex:
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
ENDFORM.

Error: "Numeric value entered was too low " -drill down discoverer report

Hi ,
We have created a Discoverer drill down report (drill down to another worksheet). We have two worksheets one for the master and and the other for the detail.The parameters are passed to detail sheet (The link information is set using the Manage links option in the Discoverer plus) from the master. This whole thing works fine in dev instance.
We imported the business area . Deleted the existing file and the opened the new .dis file from local computer and then saved it to db.
Now the master report runs fine and when we click on the drill down link for the detail we get the following error
An error occured while handling the event.See the application log for more details.
- The numerical value entered was too low."
However the link works fine in plus and desktop in the same instance.
Kindly help.
Thanks,
Shobana

I hope you're not using Internet Explorer v7.
It has a specific problem with Disco Viewer, is not certified to work with it, and the error is drilling in Viewer.
The Oracle bug (metalink) is: 5608740
This bug prevents the listing of drill items under the drill icon.
Russ

Unable to Drill Down for Report Designer

Similar Messages

Maybe you are looking for