Error occured (retrying)
I receive error occurred (retrying) when starting workflow on a document. I feel that this is because these document have long URLs but I don't know how to fix it
Hello CarlieBim
Welcome to BlackBerry Support Forums
Is your new SIM card provisioned with BlackBerry Data Plan , if it is then are you sure your device is Unlocked from your previous carrier ? look at this Knowledge Base :
KB03889 Changing the service provider or network
Good luck.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Similar Messages
-
Can anyone help with the Photo Book process? I have tried at least a dozen times and the Photo Book always fails at the very last stage of the process. I ordered Buy Book, it assembles the book and files are transferred until the very last moment... it says " An error occurred while uoloading one of your files. Please check your network connection and click Retry to resend your files." It fails every time, any advice? My server is TalkTalk which may explain everything !! ?? Help.
Boot into Safe Mode, Mac OS X: Starting up in Safe Mode, and order from there.
Also make a PDF file of your book according to this Apple Document, iPhoto '11: Preview a book, card, or calendar before you order or print it, before you order to check for errors. Keep that file to compare with the printed copy when it arrives.
OT -
I can't start Facetime. Keep getting a pop-up window saying that "an internal FaceTime error occured. There was a problem with FaceTime.
You need to quit and open FaceTime again". I keep retrying to open and keep getting the same message over again.@ reichard
yeh man i have the same problem i think when i open the ****** facetime it dosent open there is a line in facetime icon it dosent open i dont know how it work **** i want it to work hope someone help me thx -
My PC works OK with dowload, but when I try to make an update for Premiere Elements 9, it says "An error occured during download, quit and retry later" - What can I do ?
try a manual update, http://www.adobe.com/downloads/updates/
-
Just for the record:
I had received the error message "An error occurred while uploading one of your files. Please check your network connection and click Retry to resend your file" after all data apparently had been uploaded.
After trying everything recommended on the internet, I finally found the culprit: Glimmerblocker, an ad blocker!
(GlimmerBlocker version 1.4.16, Mac OS X 10.7.2 Lion)
Actually, the credit goes to the very patient German Apple support: they had finally asked me: "what software have you installed lately" ... a big applause to the guys there!
Best,
Gabriel.In our case, it was not third party software, but a problem with our router not accepting pings. If you are using a router be sure to set-up Enable WAN Ping Respond, in the advanced settings. I reviewed my wireless router's logs and found that it was blocking ICMP Type 3 packets from Apple's server. As a result, it would give the message, "An error occurred while uploading one of your files. Please check your network connection and click Retry to resend your file." You can find the blocked packets in your log based on the time you clicked the buy button for your iPhoto purchase (in my case about a dozen times). If your packets are blocked, then that is your problem.
I should have suspected it was the connection since the message plainly said, "...check your network connection...". However, I discounted this along with so many others based on the forums, since I could connect to the internet. If there only was a way the message could have gave a little more saying, "Enable your WAN Ping Respond now, or else!"
Good fortune on your road to Macenlightenment! -
Cannot attach files to email. get message "An internal error occurred when attempting to attach... " Have tried attaching docs and jpg. Same result , files don't attach. When click on try again and then "switch" the file does attach.
Cannot attach files to email. get message "An internal error occurred when attempting to attach... " Have tried attaching docs and jpg. Same result , files don't attach. When click on try again and then "switch" the file does attach.
-
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that
the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 2)
The system cannot find the file specified
Cannot connect to COWBOYS.
Here are the technical details===================================
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476
Error Number: 2
Severity: 20
State: 0
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
timeout)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
The system cannot find the file specified
I have tried from so many forms. This is so frustrating. Thank for everyone/anyone who wants to help. So this is what happened: I had to uninstall my previous sqlserver 2012(which worked great) for some reason, and I uninstalled everything from that download.
Then I installed the trial edition of sql server 2012 (64 Bit) and It wouldn't connect to the database. (Error mentioned above.) My local DB is COWBOYS. (COWBOYS is also my computer name.) After this, I have tried downloading sqlexpress and sqlserver 64bit
many times and cannot connect to my local DB.
How do I connect to my Local DB?
Also, I think this might help: (When I run sqlserve.exe, which I was able to find in C:\Program Files\Microsoft SQL Server\110\LocalDB\Binn, I get an error: Your SQL server installation is either corrupt or has been tampered with(Error getting
instance ID from name). Please uninstall then re-run setup to correct this problem.
I would happily re install it, if it wasn't my 20th time.
I don't have any remote connections, I don't use username/password, only window authentication. I work mostly on visual studio, but without able to store /retrieve data, I don't know how to survive.
May be the solution is very simple, but I am too frustrated.
Some of the things I have tried:
From a command prompt, enter one of the following commands:
net start "SQL Server Agent (MSSQLSERVER)" OR
net start "SQL Server Agent(instancename)"(for instance)
on my sql configuration, I cannot start anything because there is nothing there to start. I can post more details, if that would help. Also, some more details about the error:
Details
Product:
SQL Server
ID:
2
Source:
MSSQLServer
Version:
10.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Version:
9.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Any one that can help me, I will be greatful. Thank you so much. p.s. please ask me anything if you have any questions.It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread. -
I know this is a long story, but I'll be damned if I'm not going to get the most specific help I can (as Apple seems to specialize in assuming user error for all its demonic software). I've never had issues with iTunes before (barring a "Connect to iTunes" snafu with my iPod Touch) -- and never, in fact, with Windows Vista, if you believe that -- but this is the most bizarre thing I've seen.
I recently downloaded the new iTunes v 9.0.3 as I am occasionally prompted to do whenever a new version comes out, and immediately I had problems. Access to the iTunes and Quicktime folders was mysteriously denied after the update, and after several hours of frustration, I was able to grant my own Administrative access to these two folders and installation went through. Thank God.
Then I bought some music. No problems -- downloaded just fine, along with a copy of Cinderella Man and the new episode of Smallville. Life was good for a few days.
Then I connected my iPod Touch to the computer. All of a sudden, Microsoft Windows informs me that the "Apple Mobile Device Service stopped working and was closed," with subtext, "A problem caused the application to stop working correctly. Windows will notify you if a solution is available."
Bullsh*t Windows can help me with anything from Apple.
So I've tried to get iTunes to work with me on this. I've come up against the infamous "iTunes could not connect to this iPhone because an unknown error occurred (OxE8000001)" message. My God, when does it ever end?
So I go into Control Panel > Administrative Tools > Services > Apple Mobile Device and start it back up... only to watch it stop again inexplicably moments later. Hmm... Restart. Stays on. Unplug the iPod and plug it back in. Apple Mobile Device Service stops again. Maybe it's the iPod Service itself. Hey, that one's not started! [Start] "Windows could not start the iPod Service service on Local Computer -- Error 5: Access is denied."
What the f*ck is it with this "Access denied" crap? I've never been denied access to even the most intimate functions, files and folders on my freaking computer before! What has Apple created!?
I thought, perhaps Apple Mobile Device software was somehow removed. Okay, let's redownload iTunes (aka Repair the program from the Programs and Features menu in the Control Panel -- same thing). Huh. "An error occurred while attempting to create directory C:\Program Files\iTunes\CD Configuration," and I can choose to Retry or Cancel. So, instinctively, I deleted the CD Configuration folder, assuming iTunes Setup would just recreate it.
Well, that didn't work now, did it? I deleted it and hit Retry, and it said, "The installer has insufficient priveleges to access the directory: C:\Program Files\iTunes\CD Configuration. Log on as administrator or contact your system administrator." Running the .exe file as an adminstrator changes NOTHING about this predicament.
So that's where it stands. No CD Configuration folder; full access to all files and folders involved; Apple Mobile Device Service still keeps going off for no reason; iPod Service still doesn't run; Repairing/Reinstalling iTunes, Quicktime, Bonjour, etc. does nothing; and God (aka Steve Jobs, apparently) hates me.
. . . . . . . . . . . . Help me.Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
-Griff W. -
SharePoint Foundation 2010, hotfix install fail "An error occurred while running detection"
Hi all,
I am having a lot of trouble installing hotfix 2849990 on my server. After running it shows the error "An error occurred while running detection". I tried another hotfix as well but got the same result. I read on the web to do a "repair"
but I cannot seem to access that. I attempting to run the install to get there, I click "Install SharePoint Foundation" a new window begins and I can see a new window open that reads "Please wait while setup prepares the necessarily files"
Very shortly after this opens, it then closes and nothing else happens.
Anybody have any suggestions?
Thanks!Thanks for the quick reply. Here is the Folder I am looking in:
"C:\Users\[My User]\AppData\Local\Temp\2" Let me know if this is incorrect.
Here is some of my opatchinstall log:
OPatchInstall: Logging all properties
OPatchInstall: Property 'PACKAGE.KBARTICLE' value '2880975'
OPatchInstall: Property 'PACKAGE.MIN.MSI.VER' value '3.1.0.0'
OPatchInstall: Property 'PACKAGE.NAME' value 'Hotfix for Microsoft SharePoint Foundation 2010 (KB2880975) 64-Bit Edition'
OPatchInstall: Property 'PACKAGE.PATH.TEMP' value 'C:\Users\SVCSAN~2\AppData\Local\Temp\2\OWPBBC.tmp'
OPatchInstall: Property 'PACKAGE.PLATFORM' value '64-Bit Edition'
OPatchInstall: Property 'PACKAGE.PRODUCTNAME' value 'Microsoft SharePoint Foundation 2010'
OPatchInstall: Property 'PACKAGE.PROMPT.ALREADYINSTALLED' value 'The update is already installed on this system.'
OPatchInstall: Property 'PACKAGE.PROMPT.CONFIG.AFTERUPDATE' value 'You must install the same SharePoint 2010 Products and patches on every server in your server farm. If you have multiple servers in your farm, please immediately install the same patches on all the other farm servers once this installation has completed.'
OPatchInstall: Property 'PACKAGE.PROMPT.DETECTIONERROR' value 'An error occurred while running detection.'
OPatchInstall: Property 'PACKAGE.PROMPT.DETFAILED' value 'The detection failed, this can be due to a corrupted installation database.'
OPatchInstall: Property 'PACKAGE.PROMPT.ERROR.WITHKB' value 'The installation of this package failed. Please see for more information.'
OPatchInstall: Property 'PACKAGE.PROMPT.EULA' value 'You must accept the Microsoft Software License Terms in order to continue the installation.'
OPatchInstall: Property 'PACKAGE.PROMPT.EXTRACTFAILURE' value 'The extraction of files from this package failed.'
OPatchInstall: Property 'PACKAGE.PROMPT.EXTRACTFOLDER' value 'Select a folder to store the extracted files'
OPatchInstall: Property 'PACKAGE.PROMPT.INITIAL' value 'Do you wish to proceed with the installation?'
OPatchInstall: Property 'PACKAGE.PROMPT.INSTALLCANCELED' value 'The installation of this package was canceled.'
OPatchInstall: Property 'PACKAGE.PROMPT.INSTALLFAILURE' value 'The installation of this package failed.'
OPatchInstall: Property 'PACKAGE.PROMPT.INSTALLSUCCESS' value 'The installation is complete.'
OPatchInstall: Property 'PACKAGE.PROMPT.NOPRODUCTSPRESENT' value 'There are no products affected by this package installed on this system.'
OPatchInstall: Property 'PACKAGE.PROMPT.NOTADMINUSER' value 'You do not have sufficient privileges to complete this installation for all users of the machine. Log on as administrator and then retry this installation.'
OPatchInstall: Property 'PACKAGE.PROMPT.NOTMINMSIVERSION' value 'This program requires Windows Installer 3.1.0.0 (or greater).'
OPatchInstall: Property 'PACKAGE.PROMPT.NOTNEEDED' value 'This package is not needed for the current release of the installed product.'
OPatchInstall: Property 'PACKAGE.PROMPT.PATCHEDBYADMIN' value 'The update cannot be installed due to a previous update was installed through a modified installation source.'
OPatchInstall: Property 'PACKAGE.PROMPT.PRODUCTVERSIONFAILURE' value 'The expected version of the product was not found on the system.'
OPatchInstall: Property 'PACKAGE.PROMPT.REBOOTNEEDED' value 'Do you want to reboot now to complete the installation of this package?'
OPatchInstall: Property 'PACKAGE.PROMPT.RM.CONFIRM' value '&OK'
OPatchInstall: Property 'PACKAGE.PROMPT.RM.DETECTION' value 'Please wait while we determine the list of files that need to be updated.'
OPatchInstall: Property 'PACKAGE.PROMPT.RM.DISABLE' value 'Do ¬ close applications. (A Reboot will be required.)'
OPatchInstall: Property 'PACKAGE.PROMPT.RM.ENABLE' value 'Automatically &close applications and attempt to restart them after setup is complete.'
OPatchInstall: Property 'PACKAGE.PROMPT.RM.OPERATION' value 'The following applications should be closed before continuing the install:'
OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.DETAILSPREBODY' value 'Hotfix for Microsoft SharePoint Foundation 2010 (KB2880975) 64-Bit Edition failed to install.'
OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.GENERALAPPNAME' value 'Hotfix for Microsoft SharePoint Foundation 2010 (KB2880975) 64-Bit Edition'
OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.GENERALREPORTEE' value 'Microsoft'
OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.INTROREG' value 'We apologize for the update installation failure'
OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.MAINCAPTION' value 'Report Hotfix for Microsoft SharePoint Foundation 2010 (KB2880975) 64-Bit Edition Installation Failure'
OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.MAININTROBOLD' value 'An error report containing information about the updates that failed installation has been generated.'
OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.MAINNOREPORTBTN' value 'Cancel'
OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.MAINPLEAREG' value 'Using the information in the report we can investigate and potentially fix the problem you experienced. We will treat this report as confidential and anonymous.'
OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.MAINREPORTBTN' value 'Send Report'
OPatchInstall: Property 'PACKAGE.RM.ENABLED' value '0'
OPatchInstall: Property 'PACKAGE.RM.MINOS.VERSION' value '600'
OPatchInstall: Property 'PACKAGE.STRING.CANCEL' value '&Cancel'
OPatchInstall: Property 'PACKAGE.STRING.CANCELCONFIRMATION' value 'Are you sure you want to cancel setup?'
OPatchInstall: Property 'PACKAGE.STRING.CONTINUE' value '&Continue'
OPatchInstall: Property 'PACKAGE.STRING.DETECTING' value 'Please wait while update detection is being run.'
OPatchInstall: Property 'PACKAGE.STRING.EULACHECKBOX' value 'Click here to &accept the Microsoft Software License Terms.'
OPatchInstall: Property 'PACKAGE.STRING.EXTRACTING' value 'Extracting files, please wait...'
OPatchInstall: Property 'PACKAGE.STRING.HELP' value 'Usage:
/extract:path, extracts the content of the package to the path folder
/log[:path to log file], enables verbose logging for the update installation
/lang:lcid, sets the user interface to the specified locale when multiple locales are available within the package
/quiet, runs the package in silent mode
/passive, runs the update without any interaction from the user
/norestart, prevents prompting of user when reboot of machine is needed
/forcerestart, forced restart of machine once update is complete
/?, shows this help message'
OPatchInstall: Property 'PACKAGE.STRING.INSTALLING' value 'Please wait while the update is installed.'
OPatchInstall: Property 'PACKAGE.SUCCESS.WITHERRORS' value 'The installation is complete. However, some updates were not applied (please see the log for additional details).'
OPatchInstall: Property 'PATCH.FILEID.EULA' value 'volumelicense_eula_postrtm_en-us.txt'
OPatchInstall: Property 'PATCH.LANG' value '1033'
OPatchInstall: Property 'SYS.ARGS.EXTRACT' value '0'
OPatchInstall: Property 'SYS.ARGS.EXTRACTPATH' value 'NONE'
OPatchInstall: Property 'SYS.ARGS.EXTRACTPATHREADONLY' value '0'
OPatchInstall: Property 'SYS.ARGS.EXTRACTREADONLY' value '0'
OPatchInstall: Property 'SYS.ARGS.FORCERESTART' value '0'
OPatchInstall: Property 'SYS.ARGS.FORCERESTARTREADONLY' value '0'
OPatchInstall: Property 'SYS.ARGS.HELP' value '0'
OPatchInstall: Property 'SYS.ARGS.HELPREADONLY' value '0'
OPatchInstall: Property 'SYS.ARGS.LANG' value '0'
OPatchInstall: Property 'SYS.ARGS.LANGREADONLY' value '0'
OPatchInstall: Property 'SYS.ARGS.LANGVALUE' value 'NONE'
OPatchInstall: Property 'SYS.ARGS.LANGVALUEREADONLY' value '0'
OPatchInstall: Property 'SYS.ARGS.LOG' value '1'
OPatchInstall: Property 'SYS.ARGS.LOGPATH' value 'NONE'
OPatchInstall: Property 'SYS.ARGS.LOGPATHREADONLY' value '0'
OPatchInstall: Property 'SYS.ARGS.LOGREADONLY' value '0'
OPatchInstall: Property 'SYS.ARGS.NORESTART' value '0'
OPatchInstall: Property 'SYS.ARGS.NORESTARTREADONLY' value '0'
OPatchInstall: Property 'SYS.ARGS.PASSIVE' value '0'
OPatchInstall: Property 'SYS.ARGS.PASSIVEREADONLY' value '0'
OPatchInstall: Property 'SYS.ARGS.QUIET' value '0'
OPatchInstall: Property 'SYS.ARGS.QUIETREADONLY' value '0'
OPatchInstall: Property 'SYS.ERROR.ARG1' value 'NONE'
OPatchInstall: Property 'SYS.ERROR.ARG2' value 'NONE'
OPatchInstall: Property 'SYS.ERROR.ARG3' value 'NONE'
OPatchInstall: Property 'SYS.ERROR.ARG4' value 'NONE'
OPatchInstall: Property 'SYS.ERROR.ARG5' value 'NONE'
OPatchInstall: Property 'SYS.ERROR.CODE' value '0'
OPatchInstall: Property 'SYS.ERROR.INERROR' value '0'
OPatchInstall: Property 'SYS.ERROR.TYPE' value 'NONE'
OPatchInstall: Property 'SYS.LANG.LCID' value '1033'
OPatchInstall: Property 'SYS.LANG.NAME' value 'en-us'
OPatchInstall: Property 'SYS.LANG.RTL' value '0'
OPatchInstall: Property 'SYS.MSI.VER' value '5.0.7601.17807'
OPatchInstall: Property 'SYS.PATCH.NEEDREBOOT' value '0'
OPatchInstall: Property 'SYS.PATCH.SUGGESTREBOOT' value '0'
OPatchInstall: Property 'SYS.PROC.RESULT' value '0'
OPatchInstall: Property 'SYS.WIN.ARCHITECTURE' value 'X64'
OPatchInstall: Property 'SYS.WIN.PACKAGEPATH' value 'C:\Users\Svcsandspfarm\Desktop\ubersts2010-kb2880975-fullfile-x64-glb.exe'
OPatchInstall: Property 'SYS.WIN.PLATFORM' value 'WINNT'
OPatchInstall: Property 'SYS.WIN.SHELLVER' value '6.1.7601.18429'
OPatchInstall: Property 'SYS.WIN.SPLEVEL' value '100'
OPatchInstall: Property 'SYS.WIN.SYSTEMLCID' value '1033'
OPatchInstall: Property 'SYS.WIN.USERADMIN' value '1'
OPatchInstall: Property 'SYS.WIN.USERLCID' value '1033'
OPatchInstall: Property 'SYS.WIN.VER' value '601'
OPatchInstall: End of all properties
OPatchInstall: Setting system property 'SYS.ARGS.LOGREADONLY' with value '1'
OPatchInstall: Setting system property 'SYS.ARGS.LOGPATH' with value 'C:\Users\SVCSAN~2\AppData\Local\Temp\2\opatchinstall(6).log'
OPatchInstall: Setting system property 'SYS.ARGS.LOGPATHREADONLY' with value '1'
OPatchInstall: Done executing the IfFalse list
OPatchInstall: CActionIf::execute ends
OPatchInstall: Done executing the IfTrue list
OPatchInstall: CActionIf::execute ends
OPatchInstall: Done executing action
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.LOG' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'LOGPATH' to value '$(fullPath:SYS.ARGS.LOGPATH)'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: Executing action
OPatchInstall: CActionIf::execute starts
OPatchInstall: Begin evaluation of the condition
OPatchInstall: The property 'SYS.ARGS.LOG' is equal to '1'
OPatchInstall: Evaluation of the condition complete, the result is true
OPatchInstall: Executing the IfTrue list
OPatchInstall: Setting property 'LOGPATH' to value 'C:\Users\SVCSAN~2\AppData\Local\Temp\2\opatchinstall(6).log'
OPatchInstall: Done executing the IfTrue list
OPatchInstall: CActionIf::execute ends
OPatchInstall: Done executing action
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionExtractFile
OPatchInstall: CActionExtractFile::initFromElement starts
OPatchInstall: Will extract the file with ID '$(PATCH.FILEID.EULA)' to the path '$(PACKAGE.PATH.TEMP)\eula.txt'
OPatchInstall: CActionExtractFile::initFromElement ends
OPatchInstall: Executing action
OPatchInstall: CActionExtractFile::execute starts
OPatchInstall: Will extract the file with ID 'volumelicense_eula_postrtm_en-us.txt' to the path 'C:\Users\SVCSAN~2\AppData\Local\Temp\2\OWPBBC.tmp\eula.txt'
OPatchInstall: Getting the data from the file 'C:\Users\Svcsandspfarm\Desktop\ubersts2010-kb2880975-fullfile-x64-glb.exe'
OPatchInstall: Successfully retrieved the data location and size
OPatchInstall: CActionExtractFile::execute ends
OPatchInstall: Done executing action
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: Executing action
OPatchInstall: CActionIf::execute starts
OPatchInstall: Begin evaluation of the condition
OPatchInstall: Executing CConditionBooleanOperator::evaluate
OPatchInstall: The property 'SYS.ERROR.INERROR' exists
OPatchInstall: The property 'SYS.ERROR.INERROR' is not equal to '1'
OPatchInstall: Evaluation of the condition complete, the result is false
OPatchInstall: Executing the IfFalse list
OPatchInstall: Done executing the IfFalse list
OPatchInstall: CActionIf::execute ends
OPatchInstall: Done executing action
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'PACKAGE.NOEULA.PROMPT' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'PACKAGE.NOEULA.PROMPT' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPromptEULA
OPatchInstall: CActionPromptEULA::initFromElement starts
OPatchInstall: No action list for quiet UI specified
OPatchInstall: No Accept button specified
OPatchInstall: Cancel button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionPromptEULA::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPromptEULA
OPatchInstall: CActionPromptEULA::initFromElement starts
OPatchInstall: No action list for quiet UI specified
OPatchInstall: No Accept button specified
OPatchInstall: Cancel button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionPromptEULA::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: Executing action
OPatchInstall: CActionIf::execute starts
OPatchInstall: Begin evaluation of the condition
OPatchInstall: The property 'SYS.ARGS.PASSIVE' is equal to '0'
OPatchInstall: Evaluation of the condition complete, the result is true
OPatchInstall: Executing the IfTrue list
OPatchInstall: CActionIf::execute starts
OPatchInstall: Begin evaluation of the condition
OPatchInstall: The property 'PACKAGE.NOEULA.PROMPT' doesn't exist
OPatchInstall: Evaluation of the condition complete, the result is false
OPatchInstall: Executing the IfFalse list
OPatchInstall: CActionPromptEULA::execute starts
OPatchInstall: Running in full UI, will show the EULA dialog
OPatchInstall: Reading EULA from file 'C:\Users\SVCSAN~2\AppData\Local\Temp\2\OWPBBC.tmp\eula.txt'
OPatchInstall: User Accepted the EULA, executing the Accept action list
OPatchInstall: Finished executing the Accept action list
OPatchInstall: CActionPromptEULA::execute ends
OPatchInstall: Done executing the IfFalse list
OPatchInstall: CActionIf::execute ends
OPatchInstall: Done executing the IfTrue list
OPatchInstall: CActionIf::execute ends
OPatchInstall: Done executing action
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.EXTRACT' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListOr>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.EXTRACTPATH' to ''
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.EXTRACTPATH' to 'NONE'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPromptFolder
OPatchInstall: CActionPromptFolder::initFromElement starts
OPatchInstall: Will prompt the user with the title '$(PACKAGE.PROMPT.EXTRACTFOLDER)' and store the folder in 'PACKAGE.EXTRACT.FOLDER' if cancelled will set 'PACKAGE.FOLDER.CANCELED'
OPatchInstall: CActionPromptFolder::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'PACKAGE.FOLDER.CANCELED' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'PACKAGE.FOLDER.CANCELED' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17023'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLCANCELED)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionCreateFolder
OPatchInstall: CActionFile::initFromElement starts
OPatchInstall: Will check for file '$(PACKAGE.EXTRACT.FOLDER)'
OPatchInstall: CActionFile::initFromElements ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17024'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.EXTRACTFAILURE)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQueueExtractFile
OPatchInstall: CActionQueueExtractFile starts
OPatchInstall: Will extract the file with ID 'wssmui-nb-no.msp' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-nb-no.msp'
OPatchInstall: CAtionQueueExtractFile ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQueueExtractFile
OPatchInstall: CActionQueueExtractFile starts
OPatchInstall: Will extract the file with ID 'wssmui-nb-no.xml' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-nb-no.xml'
OPatchInstall: CAtionQueueExtractFile ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQueueExtractFile
OPatchInstall: CActionQueueExtractFile starts
OPatchInstall: Will extract the file with ID 'wssmui-cy-gb.msp' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-cy-gb.msp'
OPatchInstall: CAtionQueueExtractFile ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQueueExtractFile
OPatchInstall: CActionQueueExtractFile starts
OPatchInstall: Will extract the file with ID 'wssmui-cy-gb.xml' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-cy-gb.xml'
OPatchInstall: CAtionQueueExtractFile ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQueueExtractFile
OPatchInstall: CActionQueueExtractFile starts
OPatchInstall: Will extract the file with ID 'wssmui-prs-af.msp' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-prs-af.msp'
OPatchInstall: CAtionQueueExtractFile ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQueueExtractFile
OPatchInstall: CActionQueueExtractFile starts
OPatchInstall: Will extract the file with ID 'wssmui-prs-af.xml' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-prs-af.xml'
OPatchInstall: CAtionQueueExtractFile ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQueueExtractFile
OPatchInstall: CActionQueueExtractFile starts
OPatchInstall: Will extract the file with ID 'wssmui-ro-ro.msp' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-ro-ro.msp'
OPatchInstall: CAtionQueueExtractFile ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQueueExtractFile
OPatchInstall: CActionQueueExtractFile starts
OPatchInstall: Will extract the file with ID 'wssmui-ro-ro.xml' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-ro-ro.xml'
OPatchInstall: CAtionQueueExtractFile ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQueueExtractFile
OPatchInstall: CActionQueueExtractFile starts
OPatchInstall: Will extract the file with ID 'wssmui-th-th.msp' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-th-th.msp'
OPatchInstall: CAtionQueueExtractFile ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQueueExtractFile
OPatchInstall: CActionQueueExtractFile starts
OPatchInstall: Will extract the file with ID 'wssmui-th-th.xml' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-th-th.xml'
OPatchInstall: CAtionQueueExtractFile ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQueueExtractFile
OPatchInstall: CActionQueueExtractFile starts
OPatchInstall: Will extract the file with ID 'wssmui-ca-es.msp' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-ca-es.msp'
OPatchInstall: CAtionQueueExtractFile ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt -
PL/SQL: ORA-04052: error occurred when looking up remote object.
Hi All,
I'm getting the following error message while executing a PL/SQL Block.
PL/SQL: ORA-04052: error occurred when looking up remote object UPLDUSER.filestatushistory@FTS
ORA-00604: error occurred at recursive SQL level 1
ORA-03106: fatal two-task communication protocol error
ORA-02063: preceding line from FTSStatement
declare
v_coun number;
begin
select count(*) into v_coun
from updluser.filestatushistory@fts;
end;Back ground of the situation as follows,
My DataBase version 10.2.0.3 DB Name :DB1
Table Owner : UPLDUSER
Table Name : FILESTATUSHISTORY
I have a report user on the same database and I have grant all on the above table to report user
Report User : RPT_FTS
SQL> GRANT ALL ON FILESTATUSHISTORY_V TO RPT_FTS;Now Please find the below database details where I'm getting subjected error.
Database version : 9.2.0.8
DB Name : DB2
User Name : RPT_REPORTS
I Have create a dblink from RPT_REPORTS to RPT_FTS on DB1 and the dblink works fine. But getting the above error while running it.
but When I do the same other 10.2.0.3 db , the above PL/SQL block works fine without any problem.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Now the strange about this is that I have Created a new table on DB1 db like below;
SQL> CREATE TABLE UPLDUSER.ABC AS SELECT * FROM FILESTATUSHISTORY;and retry my code on DB2 (9.2.0.8) after changing the table to ABC and it worked. Now I don't know whats wrong with a original table(FILESTATUSHISTORY).
To over come the problem and a work-a-round method I create a view on the DB1 (RPT_FTS) like the below
SQL> CREATE VIEW FILESTATUSHISTORY AS SELECT * FROM UPLDUSER.FILESTATUSHISTORY;and was able to run the PL/SQL block Remotely.
Just wants To know what whould have been the cause for this .
Cheers
KanchanaHi Kanchana,
Perhaps following link of google search has answer to your query
ORA-04052. The search result contains some useful articles whose URLs I shan't post in the forums.
HTH!
*009* -
Hi,
I have been trying to get a very simple WebJob developed and deployed onto Azure with little to no luck. I have a MVC Website which has a common project which handles my Data Access Layer with Entity Framework. I have created a WebJob project
using Visual Studio and added the following lines of code to the Manual Trigger Function
[NoAutomaticTrigger]
public static void ManualTrigger(TextWriter log, int value, [Queue("queue")] out string message)
RitualDBEntities db = new RitualDBEntities();
log.WriteLine("Function is invoked with value={0}", value);
List<Location> locations = db.Locations.ToList();
string msg = string.Empty;
foreach (Location location in locations)
msg += location.Name;
message = msg;
log.WriteLine("Following message will be written on the Queue={0}", message);
In my app.config of my WebJob i have the following connection strings:
<add name="RitualDBEntities" connectionString="metadata=res://*/RitualDBEntities.csdl|res://*/RitualDBEntities.ssdl|res://*/RitualDBEntities.msl;provider=System.Data.SqlClient;provider connection string="data source=ritual-pc\sqlexpress;initial catalog=RitualDB;integrated security=True;persist security info=False;MultipleActiveResultSets=True;App=EntityFramework"" providerName="System.Data.EntityClient" />
<add name="RitualContext" connectionString="Integrated Security=SSPI;Persist Security Info=False;Initial Catalog=RitualDB;Data Source=ritual-pc\sqlexpress" providerName="System.Data.SqlClient" />
<add name="AzureWebJobsDashboard" connectionString="DefaultEndpointsProtocol=https;AccountName=ritual***;AccountKey=tQAP0gyMYKtWPJeIbsqk2iT2k69gyd1FwcyRf3+5Mc9b9EdYzpj0Dq8X2VHUmF*****"/>
<add name="AzureWebJobsStorage" connectionString="DefaultEndpointsProtocol=https;AccountName=ritual***;AccountKey=tQAP0gyMYKtWPJeIbsqk2iT2k69gyd1FwcyRf3+5Mc9b9EdYzpj0Dq8X2VHUmF*****" />
When i test locally (F5 Debugging) the webjob runs successfully and does the loop of the objects returned from the database. When i deploy this Azure the WebJob fails with the following error:
[03/29/2015 22:07:39 > 6ca05b: SYS INFO] Status changed to Initializing
[03/29/2015 22:07:41 > 6ca05b: SYS INFO] Run script 'Ritual.WebJobs.Members.exe' with script host - 'WindowsScriptHost'
[03/29/2015 22:07:41 > 6ca05b: SYS INFO] Status changed to Running
[03/29/2015 22:07:44 > 6ca05b: INFO] Found the following functions:
[03/29/2015 22:07:44 > 6ca05b: INFO] Ritual.WebJobs.Members.Functions.ManualTrigger
[03/29/2015 22:07:44 > 6ca05b: INFO] Executing: 'Functions.ManualTrigger' because This was function was programmatically called via the host APIs.
[03/29/2015 22:08:01 > 6ca05b: INFO] Function had errors. See Azure WebJobs SDK dashboard for details. Instance id is e99d7205-3ca0-4674-9414-f0381d5c2316
[03/29/2015 22:08:01 > 6ca05b: ERR ]
[03/29/2015 22:08:01 > 6ca05b: ERR ] Unhandled Exception: System.Data.Entity.Core.EntityException: The underlying provider failed on Open. ---> System.Data.SqlClient.SqlException: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer timeout)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnectionPool pool, DbConnection owningObject, DbConnectionOptions options, DbConnectionPoolKey poolKey, DbConnectionOptions userOptions)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject, DbConnectionOptions userOptions, DbConnectionInternal oldConnection)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject, DbConnectionOptions userOptions, DbConnectionInternal oldConnection)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, UInt32 waitForMultipleObjectsTimeout, Boolean allowCreate, Boolean onlyOneCheckConnection, DbConnectionOptions userOptions, DbConnectionInternal& connection)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal& connection)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.SqlClient.SqlConnection.Open()
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.Infrastructure.Interception.DbConnectionDispatcher.<Open>b__36(DbConnection t, DbConnectionInterceptionContext c)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.Infrastructure.Interception.InternalDispatcher`1.Dispatch[TTarget,TInterceptionContext](TTarget target, Action`2 operation, TInterceptionContext interceptionContext, Action`3 executing, Action`3 executed)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.Infrastructure.Interception.DbConnectionDispatcher.Open(DbConnection connection, DbInterceptionContext interceptionContext)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.Core.EntityClient.EntityConnection.<Open>b__2()
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.SqlServer.DefaultSqlExecutionStrategy.<>c__DisplayClass1.<Execute>b__0()
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.SqlServer.DefaultSqlExecutionStrategy.Execute[TResult](Func`1 operation)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.SqlServer.DefaultSqlExecutionStrategy.Execute(Action operation)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.Core.EntityClient.EntityConnection.Open()
[03/29/2015 22:08:01 > 6ca05b: ERR ] --- End of inner exception stack trace ---
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.Core.EntityClient.EntityConnection.Open()
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.Core.Objects.ObjectContext.EnsureConnection(Boolean shouldMonitorTransactions)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.Core.Objects.ObjectContext.ExecuteInTransaction[T](Func`1 func, IDbExecutionStrategy executionStrategy, Boolean startLocalTransaction, Boolean releaseConnectionOnSuccess)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.Core.Objects.ObjectQuery`1.<>c__DisplayClass7.<GetResults>b__5()
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.SqlServer.DefaultSqlExecutionStrategy.Execute[TResult](Func`1 operation)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.Core.Objects.ObjectQuery`1.GetResults(Nullable`1 forMergeOption)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.Core.Objects.ObjectQuery`1.<System.Collections.Generic.IEnumerable<T>.GetEnumerator>b__0()
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.Internal.LazyEnumerator`1.MoveNext()
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Collections.Generic.List`1..ctor(IEnumerable`1 collection)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Linq.Enumerable.ToList[TSource](IEnumerable`1 source)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at Ritual.WebJobs.Members.Functions.ManualTrigger(TextWriter log, Int32 value, String& message)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at lambda_method(Closure , Object[] )
[03/29/2015 22:08:01 > 6ca05b: ERR ] at Microsoft.Azure.WebJobs.Host.Executors.VoidInvoker.InvokeAsync(Object[] arguments)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at Microsoft.Azure.WebJobs.Host.Executors.FunctionExecutor.<ExecuteWithWatchersAsync>d__23.MoveNext()
[03/29/2015 22:08:01 > 6ca05b: ERR ] --- End of stack trace from previous location where exception was thrown ---
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at Microsoft.Azure.WebJobs.Host.Executors.FunctionExecutor.<ExecuteWithOutputLogsAsync>d__1c.MoveNext()
[03/29/2015 22:08:01 > 6ca05b: ERR ] --- End of stack trace from previous location where exception was thrown ---
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Runtime.CompilerServices.TaskAwaiter.ValidateEnd(Task task)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at Microsoft.Azure.WebJobs.Host.Executors.FunctionExecutor.<ExecuteWithLogMessageAsync>d__c.MoveNext()
[03/29/2015 22:08:01 > 6ca05b: ERR ] --- End of stack trace from previous location where exception was thrown ---
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
[03/29/2015 22:08:01 > 6ca05b: ERR ] at Microsoft.Azure.WebJobs.Host.Executors.FunctionExecutor.<ExecuteWithLogMessageAsync>d__c.MoveNext()
[03/29/2015 22:08:01 > 6ca05b: ERR ] --- End of stack trace from previous location where exception was thrown ---
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at Microsoft.Azure.WebJobs.Host.Executors.FunctionExecutor.<TryExecuteAsync>d__1.MoveNext()
[03/29/2015 22:08:01 > 6ca05b: ERR ] --- End of stack trace from previous location where exception was thrown ---
[03/29/2015 22:08:01 > 6ca05b: ERR ] at Microsoft.Azure.WebJobs.Host.Executors.ExceptionDispatchInfoDelayedException.Throw()
[03/29/2015 22:08:01 > 6ca05b: ERR ] at Microsoft.Azure.WebJobs.JobHost.<CallAsyncCore>d__7.MoveNext()
[03/29/2015 22:08:01 > 6ca05b: ERR ] --- End of stack trace from previous location where exception was thrown ---
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at Microsoft.Azure.WebJobs.JobHost.Call(MethodInfo method, Object arguments)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at Ritual.WebJobs.Members.Program.Main()
[03/29/2015 22:08:01 > 6ca05b: SYS INFO] Status changed to Failed
[03/29/2015 22:08:01 > 6ca05b: SYS ERR ] Job failed due to exit code -532462766
If i remove any of my database code and use just the basic Stub code my webjob will run successfully so i know that my connection strings (outside of the DB ones) are correct. My MVC web application also runs perfectly using the same connection strings
in Azure so i also know that they have also been configured.
I am now lost and need some guidance, so if someone is able to assist me that would be much appreciated.
Thanks
Ritual.Can you try to log the connection string you are using in both cases to make sure they are the same?
Also can you share your site name, either directly or indirectly?
This will help us investigate.
Thanks,
Amit -
Error:
Configure Portal Setup
An error occurred while executing a custom action:_GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6
This upgrade attempt has failed before permanent modifications were made. Upgrade has successfully rolled back to the original state of the system. Once the correction are made, you can retry upgrade for this role.
Errors in the Log:
MSI (s) (38:14) [21:30:36:094]: NOTE: custom action _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
CustomAction _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (38:94) [21:30:36:115]: User policy value 'DisableRollback' is 0
MSI (s) (38:14) [21:30:36:094]: NOTE: custom action _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
CustomAction _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (38:94) [21:30:36:115]: User policy value 'DisableRollback' is 0
I cannot get past this error. I am running Sharepoint Foundation 2010 with Sp1. This is on a Windows Server 2008 R2 Server +Sp1.
Any ideas?
David BaurI finally figured this out, The issue was that I had put in the Self Service Portal Computer Name and Service account into the Service Manager SQL as SysAdmin, once I removed it flew through just fine.
David Baur -
I'm installing the SCSM2012 Management Server
component on a SQL dev box. During the installation, the very last step (Import Management Packs) fails with this error:
An error occurred while executing a custom action:_PopulateUserRoles
This upgrade attempt has failed before permanent modifications were made. Upgrade has successfully rolled back to the original state of the system. Once the correction are made, you can retry upgrade for this role.
I've already verified that the account I'm logged in with has SA access to the SQL database. Windows 2008 R2 firewall is turned off.....
Has anybody else run into this problem?I don't see anything indicative in the setup log. The setup seems to get all the way to the part where it installs the management packs. Then right after that is when the installation fails and it rolls back.
From the setup log, towards the end:
Property(S): ACTIONSUSER = NETWORK SERVICE
Property(S): ACTIONSDOMAIN = NT AUTHORITY
Property(S): ACTIONSUSER_FOR_DB = NETWORK SERVICE
Property(S): ACTIONSDOMAIN_FOR_DB = NT AUTHORITY
Property(S): SOURCEDIR = C:\SCSM\SCSM2012_Beta\Setup\Server\
Property(S): SourcedirProduct = {295201AE-EAB6-416C-8252-7C065243EF55}
Property(S): ProductToBeRegistered = 1
MSI (s) (9C:54) [17:33:22:951]: Note: 1: 1708
MSI (s) (9C:54) [17:33:22:951]: Product: Microsoft System Center Service Manager 2012 -- Installation failed.
MSI (s) (9C:54) [17:33:22:959]: Windows Installer installed the product. Product Name: Microsoft System Center Service Manager 2012. Product Version: 7.5.1354.0. Product Language: 0. Manufacturer: Microsoft Corporation. Installation success or error status:
1603.
MSI (s) (9C:54) [17:33:23:010]: Deferring clean up of packages/files, if any exist
MSI (s) (9C:54) [17:33:23:013]: MainEngineThread is returning 1603
MSI (s) (9C:20) [17:33:23:061]: RESTART MANAGER: Session closed.
MSI (s) (9C:20) [17:33:23:061]: No System Restore sequence number for this installation.
=== Logging stopped: 11/7/2011 17:33:22 ===
MSI (s) (9C:20) [17:33:23:065]: User policy value 'DisableRollback' is 0
MSI (s) (9C:20) [17:33:23:065]: Machine policy value 'DisableRollback' is 0
MSI (s) (9C:20) [17:33:23:065]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (9C:20) [17:33:23:065]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (9C:20) [17:33:23:066]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (9C:20) [17:33:23:067]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (9C:20) [17:33:23:067]: Restoring environment variables
MSI (s) (9C:20) [17:33:23:089]: Destroying RemoteAPI object.
MSI (s) (9C:28) [17:33:23:089]: Custom Action Manager thread ending.
MSI (c) (C8:B4) [17:33:23:144]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (C8:B4) [17:33:23:175]: MainEngineThread is returning 1603
=== Verbose logging stopped: 11/7/2011 17:33:23 === -
HELP PLS.......when i download iTunes during downloading process on messege shown: "An error occurred during the installation of assembly‘Microsoft CRT.version=”8.0.50727.6195 publicKey Token = 1f c8 b3 b9a 1e 18e 3b processo rArhitecture = x86." please refer to Help and Support for more information. HRESULT: 0x80073712.
when click ok it rolling back and start process download again. and at last this messege appear: Service‘Apple Mobile Device’ (Apple Mobile Device) failed to start. Verify that youhave sufficient privileges to start system services with option
Abort Retry Ignore
i tried all option one by one but i did not success to download itunes.
Please help .You should check Windows update for Service Pack update, if there is any.
Otherwise, try to fix and update windows system filesas follows:
Go to command prompt (START/ALL PROGRAMS/ACCESSORIES right mouse click "command prompt" and choose "Run as Administrator"
type in
sfc /scannow
let Windows fix any system files that need to be repaired.
Restart the computer if it did actually repair any files.
Then do the download again. -
when i download iTunes during downloading process on messege shown:
An error occurred during the installation of assembly‘Microsoft CRT.version=”8.0.50727.4053”.type=”win32”.publicKeyToken=”1fc8b9a1e18e3b”.proce ssorArchitecture=”x86”’.Please refer to helpSuppport for more information. HRESULT:0x8007054F
when click ok it rolling back and start process download again. and at last this messege appear: Service‘Apple Mobile Device’ (Apple Mobile Device) failed to start. Verify that youhave sufficient privileges to start system services with option
Abort Retry Ignore
i tried all option one by one but i did not success to download itunes. i don't have mcafee security. i have zonealarm security.
please guide me for download itunes in my pc.Did you read threads "more like this" on the right side?
Yes there are issues and tips on resolving install errors.
Maybe you are looking for
-
Share iTunes library with multiple users of same computer
I have a new Vista Ultimate 32 computer and copied my existing iTunes library to the administrator acct in Vista. Now I want the family to use the user accts rather than the admin acct when on the computer. How can I get iTunes in a user acct to defa
-
Artists sync out of order randomly
So I just got the iPhone 4 (not 4S) and i upgraded it to iOS5 and i have iTunes 10. Everything was fine, but out of nowhere sometimes when I sync new songs it pushes all of my artists down out of alphabetical order, making half of my "B" artists unde
-
SD create Collective delivery document against scheduling agreement.
Dear freinds, I have created scheduling agreements for single material , and updated forecast deliery agaisnt IDOCS, now I want to make a single delivery agaisnt four different materials. I use Transaction VL 10 for Delivery due list and selected d
-
Hi, I'm trying to create a expired items report component. If I look at wwv_things you find the columns: - EXPIREMODE (Values PERMANENT,DATE,NUMBER) - EXPIREDATE - EXPIRENUMBER With this I'm able to determine whether an item is expired. However I can
-
Mac OS X-10.3.7-Questions about upgrading?
I am running mac os x-10.3.7 which came with my computer. I have had my computer for a few months now and I'm still learning new stuff everday and need help. I checked my updates and noticed updates for Java 1.4.2, Mac OS X Update Combined-10.3.9, Se