Is there preventative repair or maintenance for my DV2000 Laptop?

So i updated the BIOS to the latest version, and the laptop still heats up real bad, freezes, then shuts down! My laptop is on the list that qualifies for the repair BUT it doesnt fit the "symptoms" that HP lists...What should i do???
Would getting a cooling pad/fan work? Should i just try to sell/get rid of it? I'm so indecisive...Any opinions???
Thanks!!!

Same goes for my DV2711TX, only lasted for 1 year before blank out & no solution or whatsoever from HP. Been send it to HP Center, got fixed & lasted for 2 months before going blank again.....
2nd time bring it to HP Center, told me have to change motherboard just as soon my warranty expired, why they not change it on the 1st time I bring it ? They already know the root problem from the 1st time I bring it but no replacement for the motherboard on that time.... What kind of service is that ????
Now, I'm happy with other brand, their customer service is good & their technician also....

Similar Messages

  • Preventive maintenance for equipments installed in plant area

    Dear experts,
    I want to implement Preventive maintenance for equipments installed in plant area.
    Requirement is that i should be able to create a maintenance plan & schedul it as per the due dates. Maintenance order should get created. This order can be linked to the service contract item for which service entry sheet is created & released.
    I want a control on service entry sheet creation if the order is not settled or the related inspection lot which is generated is not confirmed.
    Please give advice ,how to proceed.
    Regards
    Vivek Deshpande

    Hi Vivek,
    Not sure on clearly what u need .. but have a look at some of the plans and examples of their usage for better idea ..
    1. Types : Time Based or Performance Based
    2. Single Cycle Plan [Time Based] : Ex u2013 Maintenance of a Vehicle every 03 months
    3.Single Cycle Plan [Performance Based] :Ex- Maintenance of a Vehicle every                                1000KM .
    4.Strategy Cycle Plan [Time Based] : Ex- Maintenance of a Vehicle every 03                                            months, 06 months etc.
    5.Strategy Cycle Plan [Performance Based Plans] : Ex u2013Maintenance of Vehicle                                                                          every 1000km , 2000km etc.
    6.Multiple Cycle Plan with single cycle set [Time or Performance Based] : Ex u2013                                                    Maintenance of a vehicle every 3months or                                  500km
    7.Multiple Cycle Plan with Multiple Cycle Sets [Time of Performance Based] : Ex- Maintenance of a Vehicle every 3months or 500km and 6months or 1000km
    8. The above given are explained with callobject as Maintenance Order. For getting inspection Lot then you can use order type PM05 calibration order in your Maintenance Plan and MO gets created as per the plan cycle and inspection lot gets created once u release the MO ..
    9. If you want MP related to service items then create MP with service procurement as Maintenance plan category in IP41 .. for remaining you can put MO as Maintenance plan category  .. for details refer to SAP Help ..
    regards
    pushpa

  • Preventive maintenance for maintenance assembly

              I want to Preventive Maintenance for Maintenance Assembly.( IBAU). When I create a maintenance plan I cant specify Assembly ( Only Equipment or Functional location can be selected).
                I checked the customization settings where I have specified Screen object type as FLEquipmentAssembly but still i cant see Assembly field in the maintenance plan.

    thanks but is not working.
              The problem is that i can select the Reference Object screen for a particular main. plan category in customizing , but even if i select FLEquipmentAssembly- O100 in customizing (Backend) it is reflecting as FLEquipment in the IP41,42 screen. If I Select O110 - EquipmentAssembly in the customizing it is reflecting as Equipment only by any selection Assembly is not coming.
                I guess any table is not included but i am not sure.
                 do u know where these screen types -O100,O110 are defined.

  • Best System Diagnostic, Optimisation & Repair Tool/App For Noobs & Novices?

    The one thing that frustrates the **** out of me is that for noobs like me, when something goes wrong on ones Mac - it is a absolute nightmare trying to figure out how to fix it or get rid of the problem without being a rocket scientist on mac architecture and software code.
    I then have to spend days on end shooting in the dark, browsing forums for answers and wasting valuable time trying all sorts of different things which do not usually solve the problem.
    For example, I am getting constant spinning wheels on my June 2009 17" 2.8 MBP & I mean every other minute or so. When this happens sometimes my CPU readings go through the roof - nearly 200%! Same thing happens when using Safari as when using basic, simple apps. Doing simple things can cause a massive load on the CPU's with a high temperature rise. The trackpad is also very problematic and seems to have issues - it selects & highlights things blue, the cursor sweeps away randomly or sticks, sometimes it does not respond, stops following my finger, jumps and selects the wrong input, ignores touch clicks, the multi touch features are erratic etc and is extremely sensitive. I have tried multiple repair permissions, repair & verify disks, PRAM resets, techtool pro deluxe, Preferential Treatment, Safari resets, Applejack, ClamXav, etc and none have worked.
    Is there a programme out there that constantly monitors your system and
    1) Detects when something is wrong, broken, corrupted, damaged or in conflict?
    2) Informs you of this as it happens
    3) Diagnoses the problem(s) and its/their source?
    4) Fixes or Repairs the Issue for You?
    5) Stops it from happening again
    6) Constantly keeps your system clean and ensures it is always operating at optimum performance? If not something very similar or like they have in Windows where it interactively asks and suggests possible fixes and then carries them out?
    Surely, someone at Apple must have figured out the need for something like this? I have Onyx but it is just way too complicated a programme for someone like me to use.
    I have no idea about how computers work - I am monkey see - monkey do, but even then, were not Apple computers designed just for idiots like me because they "just work"? This is getting to be worse than having to deal with the various virus scans etc on windows - at least you could find out what the problem was and deal with it directly and have a ton of resources and fixes to help you. I am wasting days on end shooting in the dark for solutions to Apple problems and it is like trying to find a needle in a haystack. How is it that one of the latest and greatest high performance notebooks around gets to use so much CPU load by just a simple thing like running a single app or browsing the internet or that the most advanced & best operating system in the world can de so very difficult to diagnose problems? I am so very frustrated and beginning to regret moving to Apple - someone please kindly help.
    Suave!

    OS X pretty much takes care of itself as far as maintenance goes. No need to defrag hard drive either; that's done on-the-fly. With that being said, here is what I have and use:
    1. OnyX - Run the "Automation" tab periodically to repair permissions, clean System and User cache, font cache, etc.
    2. Maintidget - Although OS X runs maintenance scripts automatically now, I use this widget to monitor when my maintenance scripts were run last. You also have the option to run them manually if you wish.
    3. DiskWarrior - I periodically rebuild my hard drive's directory. It's more of a preventative maintenance thing I do.
    Try logging into another User account and see if the computer runs any faster. This is a good troubleshooting procedure to see if you have a "local" or "system-wide" problem. If your computer runs faster/better in another User account, the problem is most likely isolated locally to your main User Library. For example, you could have self-inflicted problems installing software.
    How full is your hard drive? That can slow you down if it's nearly full.
    Dave M.
    MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
    Macsimum News Associate Editor  Creator of 'Mac611 - Mobile Mac Support'

  • Is there a Repair function?

    My Mail.app is not working properly.
    Lots of times, after I view mail, it moves back to "unread" status again.
    Whenever I reply to a message I get the reply arrow, but clicking on the arrow no longer takes me to the reply message (double clicking simply takes me to the incoming message). In fact clicking on the arrow does nothing.
    The application clearly has difficulties. Is there a simple maintenance tool or is anyone here versed in the dark-arts of Mail.app repair?
    Thanks in advance.
    pBook 12/1.5mhz   Mac OS X (10.4.2)  

    Jules,
    There are quite a large number of other topics about problems with flawed and/or failed conversion of mailboxes from earlier versions of Mail, to Tiger, and steps to address those problems -- See also:
    http://discussions.apple.com/thread.jspa?threadID=413196
    and
    http://discussions.apple.com/thread.jspa?threadID=340466
    and the underlying support document at:
    http://docs.info.apple.com/article.html?artnum=301315
    If you can remove all leftover files -- but only after checking the size of mbox files versus Messages folders, or being otherwise satisfied that you are not missing any pre_Tiger email messages -- then the next step may be to force Mail to re-index all the mailboxes.
    There is quite a potential for leftover, unnecessary files from each previous version of Mail.
    Ernie

  • Possibility to edit datasets, when there is already a maintenance view?

    Hello again,
    is it right that I can modify datasets even when there exists a generated maintenance view for the table?
    It was usual for me, that in the transaction SE16 don't allow that.
    Thank you for your answers!
    Melanie

    Depends on the setting for "delivery and maintenance" in SE11, should be set to "allowed with restrictions" for the underlying tables of the view. Also check the very good F1 help for this field.
    Thomas

  • There is no more space for virtual disk ServerName_2.vmdk. You might be able to continue this session by freeing disk space on the relevant volume, and clicking Retry. Click Cancel to terminate this session.   Time: 30/05/2014 1:16:20 AM

    Recently, our mail server crashed at about 7pm one night, with the error 'There is no more space for virtual disk ServerName_2.vmdk. You might be able to continue this session by freeing disk space on the relevant volume, and clicking Retry. Click Cancel to terminate this session.'
    When we click Retry, the server starts up OK.
    There are no snapshots listed in Snapshot manager for any of the virtual machines on the host.
    There is also free disk space available on the host and for the VM with the disk errors.
    This happened at least three more times, often at bad times. Each time, we were able to click 'Retry' and the disk/system would allow the VM to start-up successfully.
    I checked the Forums, the VMware support articles and the internet as I had not seen this problem before. I have completed the VSphere 5.1 - Fast Track course and this issue was NOT covered in the training.
    Most of the advice on-line and even that on the VMware web-site was pointing to snapshots being the cause of this issue. There are no snapshots enabled and I cannot see evidence of snapshots ever being used.
    - We are running VMware vsphere (5.1.0) and there are (were) 4 virtual machines running on the ESX host. We are using the free version of VMware/ESXi.
    - The Hard disk types we are using for this Virtual Machine are 'Thin Provisioned'.
    - There are 4 [Thin Provisioned] Hard Disks for this virtual machine.
    - There are 6 CPUs
    - There is 20GB of RAM (memory)
    - The VM is running Windows Server 2008 R2 as the guest/VM operating system. It is an Exchange 2010 SP1 mail server. There is plenty of available disk space on all the drives. The [Exchange] log files are cleaned out regularly (automated).
    I decided to move one of our non-critical servers off this host and on to another host to see if this helped the problem. This took quite some time, as we are not using HA or vmotion, nor do we have VCenter Server...nonetheless, I finally managed to get the non-critical server on to another host (n.b. This was a much smaller machine with less virtual resources assigned to it).
    After moving the non-critical server off this host, we decided to monitor the Host and see if the issue resolved itself.
    I checked the host about 6-10 times a day, from first thing in the morning till last thing at night - monitoring the performance of not only the Virtual Machine, but the ESXi host also.
    There were no adverse performance issues. The only thing I did note, was in the Summary page on the ESX Host, under Storage, was If I right-clicked on the datastore and clicked refresh, then the free disk space would drop (ie from 140GB to 125GB).
    After monitoring the host and VM for about 2 weeks, we did NOT have another instance of the above error.
    Sorry for the long winded post, but I wanted to give as much detail given this error has been raised before and snapshots are usually blamed as the cause.
    My question is this:
    If the ESX host had plenty of available disk capacity and there were no snapshots enabled on the VM (or any other VM's on the same host), then why did our Virtual machine crash with the error that 'there is not more space for virtual disk Servername_2.vmdk'?
    How do we prevent this issue from happening if we don't know the underlying cause?
    I would greatly appreciate any advice or suggestions.
    If I have not provided enough info on the specs or environment, please let me know and I will provide more information.
    Thanks all,
    Kurt

    The type of storage is really based on your requirements, and your ability to withstand downtime.
    iSCSI as you are using with a NAS such as Synology or QNAP.  NAS Selector - Support - Synology - Network Attached Storage (NAS)
    I wouldn't use iSCSI for Exchange or any database.  It's a bit slow.
    Do you have a single physical host?  Then I'd probably to an external direct attached storage.  This would be a card inserted in your host server that gives you multilane SAS/SATA connectivity (www.techcable.com/SAS-SATA/SAS-SATA.pps) and an external disk enclosure/array.
    For multiple hosts to a single array, I recommend a fibre channel connection to a FC capable switch, and on to a FC connected array.
    We used to use a HP P2000 (on old G1), but it's since been retired.  Worked pretty well once firmware was upgraded.  http://www8.hp.com/us/en/products/disk-storage/product-detail.html?oid=4118559#!tab=features.  They can be connected via iSCSI, Fibre Channel or 6GB SAS so they are flexible and reasonably priced.
    Recommendations:
         Use RAID 6 with your large disk arrays.  With large disks there is a measurable failure rate when rebuilding a failed RAID5 array based on MTBF.
         Use smaller 15K disks in RAID 0+1 for speed on databases/Exchange.
         Use slower 7.2K disks in RAID6 for file storage.
    We are a small hospital and we have 3 VMware servers with dual CNA (FC and Ethernet in a single twinax cable) connections to 2 redundant Cisco Nexus 5K switches and then 4 Fibre Channel connections to an EMC VNX 5300.  It's extremely fast with about 50 virtual servers, but was quite an investment.  One thing we don't have to worry about is down time.  If there ever is an equipment failure, we have redundant everything, including power split between two UPSs.
    Our VNX has 3 tiers of performance.  3 100GB SSD "Fast Cache" in RAID 1 with hot spare, to keep the most used data ready, but it's not really a tier, however one could be built utilizing the same disks.  A second tier is performance tier with a 8 600GB RAID 0+1 and hot spare.  The third is a bunch of 7.2K 3TB disks in RAID6.  The VNX autotiers, placing data on disks depending on where it's needed.  The volumes are sliced and diced automatically in the background to make this happen and we never have to touch it.  I used a demo of Solarwinds Storage Manager to monitor performance for a while and the utilization was always low, meaning all data access was fast, througout the day.
    D

  • There is no iView available for system "SAP_ERP_Manufacturing"...

    Hi out there,
    I have imported the business packages Common Parts 1.2 and Maintenance Technician 1.2 in our portal testsystem (nw7, sps18). after setting up a system with alias SAP_ECC_MANUFACTURING and asigning the role com.sap.pct.erp.maintech.maintenance_technician to my super admin user I can browse through the navigation of this role and all the iviews do what they are supposed to to (e.g. I can call the "Technical Structure View" and create a notification for an object out of the list)...
    When assigning the role com.sap.pct.erp.maintech.maintenance_technician to a test user (with the roles and groups from a simple enduser), I get the following error when trying to create anotification (or doing anything else in the technical structure view): There is no iView available for system "SAP_ERP_Manufacturing": object "notification".
    I have checked the permissions in all relevant areas of the PCD. Everywhere there are at least read permissions for everyone. Also I have copied the iView com.sap.pct.erp.common.notification_create to another place in the PCD and added it to the operation "create" of the Business Object "SAP_ERP_Manufacturing.notification" (with the highest priority). But that didn't change anything...
    Well, I don't know what else I could do to find out what's wrong. I just hope anyone out there can help me out... )
    Best Regards
    Juergen Kuechle.

    Hi Thulasi,
    sorry, but that's not the point. The system with alias "SAP_ECC_MANUFACTURING" is used to call the WD application in the R/3 backend system (which works out pretty fine). The WD application then calls back the portal using the object based navigation technology (OBN). In this case it calls the object SAP_ERP_Manufacturing.notification and tries to execute the iview linked to the action "create" of the object.
    And here exactly is the problem that I'm facing. With the super admin user OBN works fine, with an enduser the OBN fails...
    Regards, Juergen.

  • Main optimizer error - There is already a transaction for the system

    Hi Guru's,
       I am trying to download support packs from maintenance optimizer in solution manager system. When i select the logical system it gives the error
    'There is already a transaction for the system of this product version'
    After this error, it does not proceed further.
    There is many maintanence transactions in Maintanence optimizer. Now how to remove all these.
    Any ideas or solutions most welcome.
    Moses

    As Christian has already written, the only problem is that there is already an open Maintenance Transaction for that specific system. Maintenance Optimizer checks that you do not open two different Maintenance Transactions for a system at the same time.
    You only have to withdraw the old Maintenance Transaction to be able to proceed with the new one. Open the old Maintenance Transaction and click "Withdraw" on the bottom of the page. If it is grayed out, you need to go one step backwards, there you can withdraw it.
    Best regards,
    Joachim

  • There is already a transaction for the systems of this product version(MOPZ)

    Hello All,
    I am trying to configure maintenance optimizer in Solution Manager 7.0
    on Windows 2003 server and SQL 2005 server.
    I am configuring this for SAP CRM 2007 server.
    Created the server, database and system in SMSY
    Created Logical Component in TA code SMSY
    SM59 connection for SAP-OSS is OK.
    S-User is assigned to a User.
    Created a solution using TA code solution_manager.
    Defined the product version for the solution created in the TA code
    solution_manager.
    When creating a Maintenance Optimizer transaction, I select the
    product version and its logical component in the Plan Maintenance
    (Phase) and click on Continue to go to Select Files Phase, I get below
    warning:
    Information Procedure 8000000130 Saved
    Warning: Status was reset by system
    Warning: There is already a transaction for the systems of this
    product version
    I cannot get pass this phase.
    I have deleted and recreated the solution, carried out the same
    activity again but its giving the same Warning
    Warning: Status was reset by system
    Warning: There is already a transaction for the systems of this
    product version
    Any help will be appreciated???
    Regards,
    Satish.

    Hello Ragu,
    Thanks for your response.
    As of now, we do not have ChaRM in place. Secondly, we use a single customer number.
    I would like to let you know that in our landscape we have two CRM server, one ECC sever, one SOLMAN7.0 server.
    I tried to configure MOPZ for CRM, ECC, SOLMAN server to download the respective STACKS.
    I was successful in configuring CRM and SOLMAN.
    But  when I tried to configure in ECC, it failed due to RFC erros.
    So I deleted the transaction for the ECC system and deleted the system itself in Solution Manager.
    Reconfigured the Systems in "SMSY", RFC connections are correctly defined to configure MOPZ between SOLMAN7.0 and ECC6.0.
    When I start configuring the MOPZ, I cannot get pass the first phase and this is when I get an error: There is already a transaction for the systems of this product version.
    Please let me know if you need further information.
    Regards,
    Satish.

  • MASS MAINTENANCE FOR MATERIAL-RELATED EXCISE DUTIES FIELDS

    Dear Experts,
    Is there any separate t code available to MASS MAINTENANCE FOR MATERIAL-RELATED EXCISE DUTIES FIELDS ?
    I got this POINT from ECC 6.0 features in Solution browser.
    Please help me on this.
    MASS MAINTENANCE FOR MATERIAL-RELATED EXCISE DUTIES FIELDS:
    Functionality Enhancements
    Provides a specific transaction for mass maintenance of material related excise duties fields
    Business Benefits
    Mass maintenance can now be performed in one step for material-relevant excise duties fields, instead of maintaining the excise duties fields in each material master record separately.
    Regards
    Soundar.G

    Dear Ravi,
    I have already created LSMW for this in Material master and J1ID.
    But i have checked in ECC 6.0 feature, there they are mentioning New t code is available for MASS maintenance of excise duty fields.
    Regards
    Soundar.G

  • MASS MAINTENANCE FOR MATERIAL-RELATED EXCISE DUTIES FIELDS - T CODE

    Dear Experts,
    Is there any separate t code available to  MASS MAINTENANCE FOR MATERIAL-RELATED EXCISE DUTIES FIELDS ?
    I got this POINT from ECC 6.0 features in Solution browser.
    Please help me on this.
    MASS MAINTENANCE FOR MATERIAL-RELATED EXCISE DUTIES FIELDS:
    Functionality Enhancements
    Provides a specific transaction for mass maintenance of material related excise duties fields
    Business Benefits
    Mass maintenance can now be performed in one step for material-relevant excise duties fields, instead of maintaining the excise duties fields in each material master record separately.
    Regards
    Soundar.G

    Dear Ravi,
    I have already created LSMW for this in Material master and J1ID.
    But i have checked in ECC 6.0 feature, there they are mentioning New t code is available for MASS maintenance of excise duty fields.
    Regards
    Soundar.G

  • Table maintenance for HRUS_D2 missing in SRM 7.0

    Hi All,
    The table maintenance for HRUS_D2 is missing in SRM 7.0. Is there any other  other way of maintaining substitue on a large scale  by an administrator.
    i know we can assign substitute form portal , but initially we want some substitute set in the system  and currently i cannot maintain this table HRUS_D2.  The table maintenance is active in ECC system but not in SRM system.
    Any help or oss note would be appreciated.
    Thanks
    Iftekhar Alam

    Hi Masa,
    The report mentioned is  useful if we have to set substitution individually. i wanted to do in a mass way for 100-200 users  and SM30 for HRUS_D2 would have helped.
    Not sure why SAP provide the table maintenance in ECC but not in SRM.
    I have got a FM RH_UPDATE_SUBST_LIST_SERVER which i can use to update the substitution table in a mass way and it worked.
    Thanks
    Iftekhar Alam

  • Is there a 'repair' option in DW CS4?

    Dreamweaver just got stuck when I was saving a style sheet. I have switched off completely and re-started my computer but DW still tells me that my CSS files 'appear to be html' and all the external style sheet CSS options have vanished.
    Is there a 'repair' option for this software? I have CS4 web standard.  I looked in Windows Control panel and only found the uninstall option, if I am re-installing on the same computer do I still have to de-active the product?
    Grateful for some advice

    No there is not a repair option.  You really should de-activate your suite from another product if you can get in.  Because many cases the uninstall does not work well and most people have to use the CS4 Clean Script which erases the activation and if you did not de-activate the product you would have to go through a process.  If you are still able to get into DW though, make sure you Export all of your Sites to back them up because once you re-install the suite the defined sites will no longer be there. 
    Adobe - Adobe CS4 Clean Script

  • Data Maintenance For Pooled Table

    Hi,
    I have to make table maintenance for pooled table T052S , Can I make table maintenace , if I have access key, is it feaseable, as I have some requirement , which is to be done.  or is there any other method by which user can maintain this table except through SPRO.
    thanks
    bobby

    We're on ECC 5.0 here and this table already has a maintenance transaction defined - OBB9.
    This is how SAP sets up maintenance for a lot of the config tables:
         Define a Maintenance View - e.g. V_T052S
         Define a Maintenance Dialog
         Define a transaction variant on SM30
    A user can be given maintenance access for only OBB9

Maybe you are looking for