FATAL: Error inserting i915 xorg error, eee pc 1000h

Kernel version 2.6.30. Trying to install X on an eee pc 1000h. When I run xinit (using an xorg.conf autogenerated by X -configure), I get
FATAL: Error inserting i915 (/lib/modules/2.6.30-ARCH/kernel/drivers/gpu/drm/i915/i915.ko): Unknown symbol in module, or unknown parameter (see dmesg)
In short, exactly the same error as this guy is getting: http://bugs.archlinux.org/task/13968
except that I'm on kernel .30 and he's using .29.
That bug report was resolved as not a bug, since apparantly the problem gets fixed as soon as you run 'depmod -a'. Well, I tried running depmod -a, and I still get the same FATAL error when I try to start X.
If I try to run X without an xorg.conf, I get the same error, plus an additional error (EE) Failed to load module "i810" (module does not exist, 0). So that won't solve anything. Any ideas?

I have the same problem with my desktop VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller
and kernel Linux arch 2.6.30-ARCH
then i compile vanilla 2.6.31_rc5 kernel and i915 module have loaded successfully
Last edited by rovic (2009-08-13 09:15:57)

Similar Messages

Error inserting acpi_cpufreq: Input/output error?

Hi,
I'm trying to set up frequency scaling on my Intel i5 760 as per the wiki.
The only problem is I can't seem to load the acpi_cpufreq module!
# modprobe acpi_cpufreq
FATAL: Error inserting acpi_cpufreq (/lib/modules/2.6.39-ARCH/kernel/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.ko.gz): Input/output error
There is no additional output in dmesg from this error.
I'm running x86_64 btw, and I notice that it's trying to load an x86 module, could this have anything to do with it?
Thanks!

Hi
Did you find a solution? I'm having exactly the same problem with acpi-cpufreq. (eeepc 900). I tried modprobing the p4_clockmod as well, which some older posts say is required for my machine, but I got the same error.
Both modules appear to be available -
ls /lib/modules/$(uname -r)/kernel/arch/x86/kernel/cpu/cpufreq/
acpi-cpufreq.ko.gz gx-suspmod.ko.gz mperf.ko.gz powernow-k6.ko.gz speedstep-ich.ko.gz
cpufreq-nforce2.ko.gz longhaul.ko.gz p4-clockmod.ko.gz powernow-k7.ko.gz speedstep-lib.ko.gz
e_powersaver.ko.gz longrun.ko.gz pcc-cpufreq.ko.gz powernow-k8.ko.gz speedstep-smi.ko.gz
Last edited by belbo (2011-06-11 11:07:50)

Error while running ejbc. Fatal error from EJB Compiler ---- Error while pr

Hi!
I was deploying a test application for a session bean with sun 1 studio 5 and I started getting this message while deploying.
I had tested the bean previously and I had no problems.
I found this in the sun app server 7 release notes, but I don't understand what I'm supposed to do...
"Deployment of CMP beans fails.
The following error is thrown because there are no <query-params> entries in the container-managed persistence (CMP) bean in sun-ejb-jar.xml file:
Error while running ejbc. Fatal error from EJB Compiler ---- Error while processing CMP beans.
Solution
Even if it isn't necessary for the CMP beans, add the query-params tag for finders in the sun-ejb-jar.xml file with the empty parameters."
Here is my sun-ejb-jar.xml file:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE sun-ejb-jar PUBLIC "-//Sun Microsystems, Inc.//DTD Sun ONE Application Server 7.0 EJB 2.0//EN" "http://www.sun.com/software/sunone/appserver/dtds/sun-ejb-jar_2_0-0.dtd">
<sun-ejb-jar>
<enterprise-beans>
<name>GestorDoBanco_EJBModule</name>
<ejb>
<ejb-name>Cliente</ejb-name>
<jndi-name>ejb/Cliente</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/Cliente.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>ClienteAssociadoAConta</ejb-name>
<jndi-name>ejb/ClienteAssociadoAConta</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/ClienteAssociadoAConta.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>Conta</ejb-name>
<jndi-name>ejb/Conta</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/Conta.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>GestorDoBanco</ejb-name>
<jndi-name>ejb/GestorDoBanco</jndi-name>
<pass-by-reference>false</pass-by-reference>
</ejb>
<ejb>
<ejb-name>MensagemM003</ejb-name>
<jndi-name>ejb/MensagemM003</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/MensagemM003.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>MensagemM003Rejeitada</ejb-name>
<jndi-name>ejb/MensagemM003Rejeitada</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/MensagemM003Rejeitada.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>MensagemM012</ejb-name>
<jndi-name>ejb/MensagemM012</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/MensagemM012.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>MensagemM012Rejeitada</ejb-name>
<jndi-name>ejb/MensagemM012Rejeitada</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/MensagemM012Rejeitada.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>MensagemM103</ejb-name>
<jndi-name>ejb/MensagemM103</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/MensagemM103.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>MensagemM112</ejb-name>
<jndi-name>ejb/MensagemM112</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/MensagemM112.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>Registo</ejb-name>
<jndi-name>ejb/Registo</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/Registo.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>TransaccaoConfirmada</ejb-name>
<jndi-name>ejb/TransaccaoConfirmada</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/TransaccaoConfirmada.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>TransaccaoFinalizada</ejb-name>
<jndi-name>ejb/TransaccaoFinalizada</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/TransaccaoFinalizada.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>TransaccaoIniciada</ejb-name>
<jndi-name>ejb/TransaccaoIniciada</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/TransaccaoIniciada.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<pm-descriptors>
<pm-descriptor>
<pm-identifier>SunONE</pm-identifier>
<pm-version>1.0</pm-version>
<pm-class-generator>com.iplanet.ias.persistence.internal.ejb.ejbc.JDOCodeGenerator</pm-class-generator>
<pm-mapping-factory>com.iplanet.ias.cmp.NullFactory</pm-mapping-factory>
</pm-descriptor>
<pm-inuse>
<pm-identifier>SunONE</pm-identifier>
<pm-version>1.0</pm-version>
</pm-inuse>
</pm-descriptors>
<cmp-resource>
<jndi-name>mysqlpmanager</jndi-name>
<default-resource-principal>
<name>bes</name>
<password>besbes</password>
</default-resource-principal>
</cmp-resource>
</enterprise-beans>
</sun-ejb-jar>
Thanks in advance for any help.
Nuno

http://docs.sun.com/source/817-2175-10/decmp.html
Please go to the above docs and look thru the examples given in it.
Example 2
This query returns all products in a specified price range. It defines two query parameters which are the lower and upper bound for the price: double low, double high. The filter compares the query parameters with the price field:
"low < price && price < high"
The finder element of the sun-ejb-jar.xml file would look like this:
<finder>
<method-name>findInRange</method-name>
<query-params>double low, double high</query-params>
<query-filter>low < price && price &lt
high</query-filter
</finder>
I hope this hepls. In your case u just have to make it null.

Error inserting a row into a table with identity column using cfgrid on change

I got an error on trying to insert a row into a table with identity column using cfgrid on change see below
also i would like to use cfstoreproc instead of cfquery but which argument i need to pass and how to use it usually i use stored procedure
update table (xxx,xxx,xxx)
values (uu,uuu,uu)
     My component

    <cffunction name="cfn_MediaType_Update" access="remote">
        <cfargument name="gridaction" type="string" required="yes">
        <cfargument name="gridrow" type="struct" required="yes">
        <cfargument name="gridchanged" type="struct" required="yes">
        
        <cfset var colname="">
        <cfset var value="">
        
        <cfswitch expression="#ARGUMENTS.gridaction#">
            
            <cfcase value="U">
                
                <cfset colname=StructKeyList(ARGUMENTS.gridchanged)>
                <cfset value=ARGUMENTS.gridchanged[colname]>
                
                <cfquery datasource="#application.dsn#">
                UPDATE SP.MediaType
                SET #colname# = '#value#'
                WHERE MediaTypeID = #ARGUMENTS.gridrow.MediaTypeID#
                </cfquery>
            </cfcase>
            
            <cfcase value="D">
                
                <cfquery datasource="#application.dsn#">
                update SP.MediaType
                set Deleted=1
                WHERE MediaTypeID = #ARGUMENTS.gridrow.MediaTypeID#
                </cfquery>
            </cfcase>
            <cfcase value="I">
                
                <cfset colname=StructKeyList(ARGUMENTS.gridchanged)>
                <cfset value=ARGUMENTS.gridchanged[colname]>
                
               <cfquery datasource="#application.dsn#">
                insert into SP.MediaType (#colname#)
                Values ('#value#')
                </cfquery>
            </cfcase>
        </cfswitch>
    </cffunction>
my table
mediatype:
mediatypeid primary key,identity
mediatypename
my code is
<cfform method="post" name="GridExampleForm">
        <cfgrid format="html" name="grid_Tables2" pagesize="3" selectmode="edit" width="800px"
        delete="yes"
        insert="yes"
            bind="cfc:sp3.testing.MediaType.cfn_MediaType_All
                                                            ({cfgridpage},{cfgridpagesize},{cfgridsortcolumn},{cfgridsortdirection})"
              onchange="cfc:sp3.testing.MediaType.cfn_MediaType_Update({cfgridaction},
                                            {cfgridrow},
                                            {cfgridchanged})">
            <cfgridcolumn name="MediaTypeID" header="ID" display="no"/>
            <cfgridcolumn name="MediaTypeName" header="Media Type" />
        </cfgrid>
</cfform>
on insert I get the following error message ajax logging error message
http: Error invoking xxxxxxx/MediaType.cfc : Element '' is undefined in a CFML structure referenced as part of an expression.
{"gridaction":"I","gridrow":{"MEDIATYPEID":"","MEDIATYPENAME":"uuuuuu","CFGRIDROWINDEX":4} ,"gridchanged":{}}
Thanks

Is this with the Travel database or another database?
If it's another database then make sure your columns
allow nulls. To check this in the Server Navigator, expand
your DataSource down to the column.
Select the column and view the Is Nullable property
in the Property Sheet
If still no luck, check out a tutorial, like Performing Inserts, ...
http://developers.sun.com/prodtech/javatools/jscreator/learning/tutorials/index.jsp
John

Fatal two-task communication protocol error (when using db link)

I have created the db link betwen two databases of oracle version 9i 9.0.2
the db link connects to specific user
when i access the table with same name as user then recieve following message
ORA-03106: fatal two-task communication protocol error
when i access the other tables having different name that the user to which the db link connects
that works alright
so what is solution of problem in this particular case?

What is your Oracle release? Is it 9.0.1.2 or 9.2.0?
What version of Sql*Plus client are you using?

Syntax error, insert "}" to complete Class body.

Hello everyone,
I am trying to create simple Adobe form with WebDynpro for java. Java error in autogenerated class appears "Syntax error, insert "}" to complete Class body". As I see, java class really corrupted - there are no "}" at the class end.
Really appreciate any help.
Kirill

It dissappeared.

Error inserting data into database

Hello I am having error inserting data into database through a servlet.Please I am very new to Java Technology and need your immediate help. beloww is the codea nd the error
Apache Tomcat/4.0.3
ERROR: Problems with adding new entry
java.sql.SQLException: [Microsoft][ODBC SQL Server Driver][SQL Server]There are more columns in the INSERT statement than values specified in the VALUES clause. The number of values in the VALUES clause must match the number of columns specified in the INSERT statement.
     at sun.jdbc.odbc.JdbcOdbc.createSQLException(JdbcOdbc.java:6106)
     at sun.jdbc.odbc.JdbcOdbc.standardError(JdbcOdbc.java:6263)
     at sun.jdbc.odbc.JdbcOdbc.SQLExecDirect(JdbcOdbc.java:2525)
     at sun.jdbc.odbc.JdbcOdbcStatement.execute(JdbcOdbcStatement.java:337)
     at Register.insertIntoDB(Register.java:71)
     at Register.doPost(Register.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:243)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:190)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
     at org.apache.catalina.valves.CertificatesValve.invoke(CertificatesValve.java:246)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
     at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2343)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:180)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
     at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:170)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:170)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
     at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:468)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:174)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
     at org.apache.catalina.connector.http.HttpProcessor.process(HttpProcessor.java:1012)
     at org.apache.catalina.connector.http.HttpProcessor.run(HttpProcessor.java:1107)
     at java.lang.Thread.run(Thread.java:536)
COde:
import java.util.*;
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
import java.sql.*;
public class Register extends HttpServlet
     public static Statement statement;
     private Connection DBConn;
     public void init(ServletConfig config) throws ServletException
          super.init(config);
          try {
               Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
               DBConn=DriverManager.getConnection("jdbc:odbc:Challenge");
          catch(Exception e) {
               e.printStackTrace();
               DBConn=null;
     public void doPost(HttpServletRequest req, HttpServletResponse res)
          throws ServletException, IOException
               String user_id,FirstName,LastName, Email, Login, Password;
          FirstName = req.getParameter("FirstName");
          LastName = req.getParameter("LastName");
          Email = req.getParameter("Email");
          Login = req.getParameter("Login");
          Password = req.getParameter("Password");
          PrintWriter output = res.getWriter();
          res.setContentType("text/html");
          if (user_id.equals("")||
          FirstName.equals("") ||
               LastName.equals("") ||
               Email.equals("") ||
               Login.equals("") ||
               Password.equals(""))
                    output.println("<H3>Please click back " + "button and fill in all " + "fileds.</H3>");
                    output.close();
                    return;
               boolean success = insertIntoDB("'" + FirstName + "','" + LastName + "','" + Email + "','" + Login + "','" + Password + "'");
               if (success)
                    output.print("<H2>Thank You " + FirstName + " for registering.</H2>");
                    res.sendRedirect("file:///Register.html");
               else
                    output.print("<H2>An error occured. " + "Please try again later.</H2>");
                    output.close();
          private boolean insertIntoDB(String stringtoinsert)
               try
                    statement = DBConn.createStatement();
                    statement.execute("INSERT INTO Users(user_id,FirstName,LastName,Email,Login,Password) values (" + stringtoinsert + ");");
                    statement.close();
               catch (Exception e)
                    System.err.println("ERROR: Problems with adding new entry");
                    e.printStackTrace();
                    return false;
               return true;
          public void destroy()
               try
                    DBConn.close();
               catch(Exception e)
                    System.err.println("Problem closing the database");
Your Help will be very much appreciate.I am using SQL Server database

The error concerns these two lines:
boolean success = insertIntoDB("'" + FirstName + "','" + LastName + "','" + Email + "','" + Login + "','" + Password + "'");
statement.execute("INSERT INTO Users(user_id,FirstName,LastName,Email,Login,Password) values (" + stringtoinsert + ");");
In the first line above, you have a string which represents the VALUES which you are inserting. There are 5 values. However in the second line above this is your actual SQL execution you are specifying 6 columns of data. If the column "user_id" is an identity or auto-incrementing field in the database, just remove it from this line. If not then you need to supply the "UserID" into the VALUES.
This should fix the problem.

Insertion of an error report was throttled to prevent flooding of the Call Detail Recording (CDR) database

Hello,
One of my Lync 2013 standard front-end servers is frequently logging this error:
Log Name:      Lync Server
Source:        LS Data Collection
Date:          28/12/2012 10:04:05
Event ID:      56208
Task Category: (2271)
Level:         Warning
Keywords:      Classic
User:          N/A
Computer:      LYNC-FE2.mydomain.local
Description:
Insertion of an error report was throttled to prevent flooding of the Call Detail Recording (CDR) database.
Component: CDR Adaptor
Cause: This is an expected condition if too many error reports of the same type were reported at the same time.
Resolution:
No action is needed. A large enough number of error reports of this type have already been inserted into the database and can be used for troubleshooting and reporting. Additional errors are not inserted to avoid flooding of the database with redundant information.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="LS Data Collection" />
    <EventID Qualifiers="35039">56208</EventID>
    <Level>3</Level>
    <Task>2271</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2012-12-28T10:04:05.000000000Z" />
    <EventRecordID>10745</EventRecordID>
    <Channel>Lync Server</Channel>
    <Computer>LYNC-FE2.mydomain.local</Computer>
    <Security />
</System>
<EventData>
    <Data>CDR Adaptor</Data>
</EventData>
</Event>
I don't appear to have any problems or issues with Lync at all. Full Enterprise Voice is in use at this site.
Anyone know why this may be occuring?
Thanks,
Ben

Did you check any additional errors? I'm seeing the same issue and linked it to this actual error message that seems to point towards a broken data model or bugged type casting/checking in the interface:
Failed to execute a stored procedure on the back-end.
Component: CDR Adaptor
Stored Procedure: RtcReportError
Error: System.Data.SqlClient.SqlException (0x80131904): Error converting data type varchar to float.
   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
   at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
   at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
   at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite)
   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
   at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
   at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
   at Microsoft.Rtc.Common.Data.DBCore.Execute(SprocContext sprocContext, SqlConnection sqlConnection, SqlTransaction sqlTransaction)
ClientConnectionId:xxxxxxxxxxxxx
Cause: Configuration issues, an unreachable back-end or an unexpected condition has resulted in the error.
Resolution:
Verify the back-end is up and this Lync Server has connectivity to it. If the problem persists, notify your organization's support team with the relevant details.

Internal error - insert in sorted tabl ZADRU with

Hello Experts,
While i open BP transaction for one of the business partner. We are getting the following error:
*Internal error - insert in sorted tabl ZADRU with*.
Request your help to resolve this issue. Do we have some SAP note to handle such scenarios. It seems the data has become inconsistent.
Thanks,
Rohit

Hi, Rohit
Table ZADRU - it's your own development, please ask abap-team about this table.
Denis

ORA-03106: fatal two-task communication protocol error

Hello everyone,
we have a problem with one of our table.
the problem occurs when i execute
SQL> select * from t;
select * from t
ERROR at line 1:
ORA-03106: fatal two-task communication protocol error
but i can access the data by giving the column names for the whole table.
also there is nothing wrong with the other tables in the schema.
many thanx in advance

first of all thanx in advance
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bi
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for IBM/AIX RISC System/6000: Version 10.2.0.1.0 - Productio
NLSRTL Version 10.2.0.1.0 - Production
SQL> select comp_id, version, status from dba_registry;
COMP_ID VERSION STATUS
CATALOG 10.2.0.1.0 VALID
CATPROC 10.2.0.1.0 VALID
OWM 10.2.0.1.0 VALID
JAVAVM 10.2.0.1.0 VALID
XML 10.2.0.1.0 VALID
CATJAVA 10.2.0.1.0 VALID
EXF 10.2.0.1.0 VALID
ODM 10.2.0.1.0 VALID
CONTEXT 10.2.0.1.0 VALID
XDB 10.2.0.1.0 VALID
RUL 10.2.0.1.0 VALID
COMP_ID VERSION STATUS
ORDIM 10.2.0.1.0 VALID
APS 10.2.0.1.0 VALID
XOQ 10.2.0.1.0 VALID
AMD 10.2.0.1.0 VALID
SDO 10.2.0.1.0 VALID
EM 10.2.0.1.0 VALID
but i cannot understand why..
as far as i know, nothing changed. but maybe the other admins:)
as i said i can query all colums in table t without using a *,
also i can use * when i include rowid in the query
select m.*,rowid from t m;
i am very confused now:S

ORA-3106 : fatal two-task communication protocol error

We get the following error intermittantly in our server. We are using WebLogic 6.1. Any reason. Here is the log we are getting...
Parsing: BEGIN gid_msg_fund.fund_get_details (:1, :2, :3, :4, :5, :6, :7, :8)
; END;
Executing: BEGIN gid_msg_fund.fund_get_details (:1, :2, :3, :4, :5, :6, :7, :8
) ; END;
SQLException: SQLState() vendor code(3106)
java.sql.SQLException: ORA-03106: fatal two-task communication protocol error
at weblogic.db.oci.OciCursor.getCDAException(OciCursor.java:240)
at weblogic.jdbc.oci.Statement.executeUpdate(Statement.java:990)
at weblogic.jdbc.oci.Statement.execute(Statement.java:1430)
at ...

ORA-03106
========
Possible reasons for the ORA-03106 errors include:
1. Incompatibilities between the client application and the RDBMS server.
For
example, version incompatibilities, or a client trying to use a feature not
supported by the database kernel.
2. When using database links or gateways.
3. Network or SQL*Net problems.
4. Corruptions.
5. PL/SQL - language related.
RDBMS - Troubleshooting two-task common errors
==============================================
1. Check for NLS incompatibilities between the client and server. This is
a very popular cause of the ORA-03106 error.
2. Check the alert log and RDBMS trace files for any pertinent information /
errors that coincide with receiving the ORA-03106 error.
3. Try to get a testcase and reproduce the problem in-house.
4. If a testcase is not possible, ask for SQL*Net trace files, SQL traces,
and
try setting event 3106 to obtain the error stack.
5. In extreme circumstances, this could indicate that a shared memory
segment
used by Oracle is corrupted. You will have to shut down the database,
possibly using the abort option. Make sure all semaphores have been
released by using the IPCS command on Unix. Oracle uses semaphores to
control concurrency between all of the background processes (pmon, smon,
drwr, lgwr, and oracle shadow processes). Semaphores are also used to
control Two-Task communication between the user process and the shadow
process.
6. Try and narrow down the code that may be causing it. For example it might
have started to happen after increasing the number of parameters in a PL/SQL
block or when using certain values for bind variables, etc.
7. If we still do not make headway, file a bug under RDBMS, but we still may
need some or all of the above information as indicated above
hope it helps!!
"Prasanna" <[email protected]> wrote in message
news:[email protected]...
We get the following error intermittantly in our server. We are usingWebLogic 6.1. Any reason. Here is the log we are getting...
>
Parsing: BEGIN gid_msg_fund.fund_get_details (:1, :2, :3, :4, :5, :6,:7, :8)
; END;
Executing: BEGIN gid_msg_fund.fund_get_details (:1, :2, :3, :4, :5, :6,:7, :8
) ; END;
SQLException: SQLState() vendor code(3106)
java.sql.SQLException: ORA-03106: fatal two-task communication protocolerror
at weblogic.db.oci.OciCursor.getCDAException(OciCursor.java:240)
at weblogic.jdbc.oci.Statement.executeUpdate(Statement.java:990)
at weblogic.jdbc.oci.Statement.execute(Statement.java:1430)
at ...

ORA-03106: fatal two-task communication protocol error USING INFORMATICA

Hi,
We are testing Oracle 10203 with linux using INFORMATICA 8.1.1
The user who run the informaica is getting the following error , after runing query against a remote database.
READER_12_1_1> RR_4035 SQL Error [
ORA-03106: fatal two-task communication protocol error
(Please note that informatica is not using db links to open a connection against a remote db).
The informatica client is installed on the same machine as the oracle database and they are using the same oracle client (e.g: 10203)
I also set a trace in the sqlnet.ora at server side and at the client side.
No error regarding ora-3106 was generated in the trace files.
I also added: alter system set events '3106 trace name errorstack level 10', but nothing writthen to the trace file.
Any suggestion ?
Thanks.

Error: ORA 3106
Text: fatal two-task communication protocol error
Cause: The communication path between Oracle and the user task has stopped.
This is an internal error message not usually issued.
Action: Contact customer support.
====================================================
Unfortunately the error text doesn't lie, this error is difficult to catch. You may search metalink's knowledge base for possible reasons,but there are many. And, since this is a 3rd party application, I would ask INFORMATICA (not Oracle), do they certify against 10g? Sometimes simply the application is not ready for the used Oracle version.
Werner

File: e:\pt849-905-R1-retail\peopletools\SRC\PSRED\psred.cppSQL error. Stmt #: 1849 Error Position: 24 Return: 3106 - ORA-03106: fatal two-task communication protocol error Failed SQL stmt:SELECT PROJECTNAME FROM PSPROJECTDEFN ORDER

File:
e:\pt849-905-R1-retail\peopletools\SRC\PSRED\psred.cppSQL error. Stmt #:
1849 Error Position: 24 Return: 3106 - ORA-03106: fatal two-task
communication protocol error
Failed SQL stmt:SELECT PROJECTNAME FROM PSPROJECTDEFN ORDER
BY PROJECTNAME
Got this error when opening the peopletools application designer 8.49. The same is working fine within the server, but not working from the client's machine.
We can still able to connect to the database & URL
Please help by throwing some lights.
Thanks,
Sarathy K

Looks like a SQL error. ARe you able to connect to the database with SQL*Plus ? Probably the Oracle client is badly configured.
Nicolas.

EJB Error: ORA-03106: fatal two-task communication protocol error

after weblogic running some time,my program often throw this Exception:
javax.ejb.EJBException: ejbLoad: ORA-03106: fatal two-task communication
protocol error
at
com.ebao.life.ejb.entity.customer.CustomerBean.ejbLoad(CustomerBean.java:206
at
weblogic.ejb.internal.EntityEJBContext.load(EntityEJBContext.java:160)
at
weblogic.ejb.internal.EntityEJBContext.afterBegin(EntityEJBContext.java:217)
at
weblogic.ejb.internal.StatefulEJBObject.getContextForInvoke(StatefulEJBObjec
t.java:165)
at
weblogic.ejb.internal.BaseEJBObject.preInvoke(BaseEJBObject.java:476)
at
com.ebao.life.ejb.entity.customer.CustomerBeanEOImpl.getData(CustomerBeanEOI
mpl.java:105)
at
com.ebao.life.bean.newbizgroup.entry.code.CodeBean.entry(CodeBean.java:120)
at
com.ebao.life.servlet.newbizgroup.entry.code.CodeEntryServlet.doPost(CodeEnt
ryServlet.java:39)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:772)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:865)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:120)
I use weblogic 5.1 sp10,Redhat Linux 6.2,and JDK 1.3
and the sp9 is the same.

I think there are too many bugs weblogic sp9 and later.
There are many strange jdbc error in these service pack
"Narinder" <[email protected]> wrote:
It seems like the connection to the oracle database is lost for no reason.
What is the oracle database server and the jdbc driver you are using?
Most
of the time this happens because the jdbc driver is not compatible with
the
oracle server.
-Narinder
"jason" <[email protected]> wrote in message
news:[email protected]..
after weblogic running some time,my program often throw this Exception:
javax.ejb.EJBException: ejbLoad: ORA-03106: fatal two-task communication
protocol error
at
com.ebao.life.ejb.entity.customer.CustomerBean.ejbLoad(CustomerBean.java:206
at
weblogic.ejb.internal.EntityEJBContext.load(EntityEJBContext.java:160)
at
weblogic.ejb.internal.EntityEJBContext.afterBegin(EntityEJBContext.java:217)
at
weblogic.ejb.internal.StatefulEJBObject.getContextForInvoke(StatefulEJBObjec
t.java:165)
at
weblogic.ejb.internal.BaseEJBObject.preInvoke(BaseEJBObject.java:476)
at
com.ebao.life.ejb.entity.customer.CustomerBeanEOImpl.getData(CustomerBeanEOI
mpl.java:105)
at
com.ebao.life.bean.newbizgroup.entry.code.CodeBean.entry(CodeBean.java:120)
at
com.ebao.life.servlet.newbizgroup.entry.code.CodeEntryServlet.doPost(CodeEnt
ryServlet.java:39)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:772)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:865)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:120)
I use weblogic 5.1 sp10,Redhat Linux 6.2,and JDK 1.3
and the sp9 is the same.

Help about "ORA-03106: fatal two-task communication protocol error"

Hello.
After having changed some functions written in pro*C, I am getting "ORA-03106: fatal two-task communication protocol error", in the functions I have changed (all of them).
Can someone tell me what the problem can be ?
Tahnks in advance.

The problem seems to be in pro*C code:
My pro*C function is like this:
int CSRIRDB_checkGT(char* in_CO_GT_V,
char* out_SQ_GZL_01)
int var_Error = CSRIRDB_OK;
char var_Sqlerrmc[2000];
char var_msg[512]; /* 512 es la longitud máxima del mensaje oracle incluyendo saltos de línea */
size_t var_buf_len, var_msg_len;
/* and the error is beacuse the following assignment */
:out_SQ_GZL_01 := to_char(v_SQ_GZL_01);
/* where v_SQ_GZL_01 is a NUMBER(5) */
I don't know what I'm doing wrong.

FATAL: Error inserting i915 xorg error, eee pc 1000h

Similar Messages

Maybe you are looking for