Error on JCA connection with R/3 (Failure: ConnctorService)

Hi all,
i'm working with <b>SAP EP 6 SP 2</b>. I've developed an custom application that calls an BAPI on R/3 by the JCA connection.
the custom component works well in the develop enviroment but it go bad in quality enviroment.
when i execute it i've the following error message:
<b>Failure: ConnctorService- getConnectionFactory(), retrieving the ConnectionFactory</b>
any ideas?
thanks a lot!
gennaro

Hello,
   In order to access the connector service of portal, we need to configure this system information in the portal.
   System Administration --> System Configuration
   After this, you will have also have do User mapping to this system.
   When you configure this system in the above way, you can also test for the connections validity.
   You can find relevant information on portal guide http://help.sap.com/saphelp_nw04/helpdata/en/ea/d4df3df2ad685ae10000000a11405a/frameset.htm
   Hope this helps.
Best Regards,
Padma

Similar Messages

Internet Download error message: the connection with the server has been reset

With an WRT54GS v6 firmware v 1.50.9 on Windows XP SP2 with Internet Explorer 7, Intel wireless internal adaptor w/ 802.11b, I was getting the error message "The connection with the server has been reset" when downloading most anything from the Internet. My IP address would then be reset and download would be interrupted. To resolve, I turned off the WZC (Wireless Zero Configuration) Services, and this seems to correct the problem.
Control Panel > Admin Tools > Services > Wireless Zero Configuration > Disable
Hopes this helps.

Hi!
Im using Windows 7.... I tried looking for the Wireless Config - but it isn't in the Services options!
So, what can I do now?
Thanx

Error while Test Connection with Connector

hi all:
     there is an error while Test Connection with Connector , I also test it through sys administration->sys configuration->
suport -> sap transaction, I got all errors, I put these two errors as folows, could you please tell me how to sovle it
***************ERROR 1 while *error while Test Connection with Connector ******************************************************
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this
system object
Results
Retrieval of default alias successful
Connection failed. Make sure that Single Sign-On is configured correctly
************error sys administration->sys configuration-> suport -> sap transaction        ********************** 1.5 #0025B3E02892006100000A0800001798000487530FB0122E#1274690722265#com.sap.portal.prt.runtime#sap.com/irj#com.sap.portal.prt
.runtime#guodongdong#47472##n/a##690347f0670e11df98cc0025b3e02892#SAPEngine_Application_Thread[impl:3]
9##0#0#Error##Java###04:4524/05/10_0077_6087550
[EXCEPTION]
#1#com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in SAP Application Integrator occured: Application URL
&\#39;:///sap(ZT1KVXBWektldldTeV9QQXBXRjNaWTRBLS1OZmRvZzBRWWY2QmN0WThNUmgqdUlRLS0=)/bc/gui/sap/its/webgui&\#39; is not valid!
Please check the protocol and host entries for system &\#39;sapdev&\#39;.
     at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContentPass
(AbstractIntegratorComponent.java:123)
     at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContent(AbstractIntegratorComponent.java:98)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
     at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
     at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
     at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
     at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:523)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:412)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process
(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)

Hi,
As per this part of the trace:
Exception in SAP Application Integrator occured: Application URL &\#39;:///sap(ZT1KVXBWektldldTeV9QQXBXRjNaWTRBLS1OZmRvZzBRWWY2QmN0WThNUmgqdUlRLS0=)/bc/gui/sap/its/webgui&\#39; is not valid! Please check the protocol and host entries for system &\#39;sapdev&\#39;. at ...
You can clearly see that the system object 'sapdev' is not configured correctly/at all - you are trying to launch transaction iView
(WEBGUI) and in order to do so you should configure the 'internet transaction server' category of the system object
with the hostname of the ITS server.
Generally the template is
<System.Access.ITS.protocol>://<System.Access.ITS.hostname>/sap<ESID>/bc/gui/sap/its/webgui?\....
So that's why you got
Please check the protocol and host entries for system ..

Error -2147418113 when connecting with SQL toolkit

I have no trouble connecting with DBConnect( ) to an Access database. However, when I try to connect to an Oracle database (Oracle73 driver), I get error -2147418113 "Catastrophic failure". Any ideas? Thanks.

Hi Gris,
This seems to be a relatively common error when connecting to SQL databases and is not necessarily related to LabWindows/CVI. The following are several third party resources that I hope you will find helpful in your troubleshooting:
Microsoft Support 1
Microsoft Support 2
Microsoft Support 3
There is one KnowledgeBase referring to this error when expereinced in our LabVIEW Database Connectivity that you may also find helpful:
Receiving Error -2147418113 "Catastrophic Failure in xxx.vi" When Using Database Connectivity Toolki...
I hope this helps!
Regards,
Jackie
DAQ Product Marketing Engineer
National Instruments

Error creating JCA connection factory in NWA

Hi,
I need to load an file with idoc content into a XML.
So parameter IDOCXmlToFlatConvertor is required and it's necessary to create a JCA Connection Factory in NWA.
I'm trying to do it using :
/people/william.li/blog/2009/04/01/how-to-use-user-module-for-conversion-of-idoc-messages-between-flat-and-xml-formats
http://help.sap.com/saphelp_nwpi711/helpdata/en/b5/bd93642dd3410f90ebea702399fac4/frameset.htm
But, when i try to create a JCA Connection Factory in NWA, systems returns next error:
com.sap.engine.services.connector.exceptions.BaseDeploymentException: Can not set authentication user store "null" in security context "MRD_300" for connector "MRD_300" in application "sap.com/tc~sapjra".
at com.sap.engine.services.connector.deploy.util.security.SecurityUtils.deploySecurity(SecurityUtils.java:507)
However, creating JCA connection as indicated in this blog, security tab doesn't allow any change and field user store can't be modified.
How to do it?
Carme

Hello Carme,
From the error , I can see that the name of the JCA Connection Factory that you are trying to create in NWA is: "MRD_300".
This beautiful blog by William will surely help you rectify the problem.
/people/william.li/blog/2009/04/01/how-to-use-user-module-for-conversion-of-idoc-messages-between-flat-and-xml-formats
Kindly check if you have done the following in your configuration:
1. Copy and create new dependent JCA Connection Factory from the JCA resource: "SAPJavaResourceAdapter15"
2. You have to go to the "Configuration Properties" tab (and not Security tab) of your JCA connection Factory (MRD_300) to enter the credentials that will be used by this CF. Make sure that you enter the details properly. Eg. In your case, just check if the password is entered.
3. Also, check if the JCA resource "SAPJavaResourceAdapter15" is up and running (green traffic light). Else, restart the corresponding Java Service from NWA -> Operations Management -> Start & Stop -> Java Services
I hope this should solve your problem.
Regards, Gaurav.

Error while making connection with remote oracle database

Dear,
I am trying to make connection with oracle database but when i run java file it's raise an error "classnotfoundexception oracle.jdbc.driver.oracledriver"
DriverManager.getConnection(
"jdbc:oracle:thin:@erp:1521:ORCL", "apps",
"apps");
Pls any body have idea.
Thanks.

Thanks for support.
Below is error which i am getting while making connection with remote database.
C:\Program Files\Java\jdk1.7.0_05\bin>java OracleJDBC
-------- Oracle JDBC Connection Testing ------
Where is your Oracle JDBC Driver?
java.lang.ClassNotFoundException: oracle.jdbc.driver.OracleDriver
        at java.net.URLClassLoader$1.run(URLClassLoader.java:366)
        at java.net.URLClassLoader$1.run(URLClassLoader.java:355)
        at java.security.AccessController.doPrivileged(Native Method)
        at java.net.URLClassLoader.findClass(URLClassLoader.java:354)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:423)
        at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:356)
        at java.lang.Class.forName0(Native Method)
        at java.lang.Class.forName(Class.java:186)
        at OracleJDBC.main(OracleJDBC.java:13)
Advice.

JDBC receiver error Cannot establish connection with the registered driver

Hi Expert,
I am constructing a proxy to JDBC scenario. And I am getting error saying "
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error when attempting to get processing resources: com.sap.aii.af.lib.util.concurrent.ResourcePoolException: Unable to create new pooled resource: DriverManagerException: Cannot establish connection with the registered driver. oracle.jdbc.driver.OracleDriver returns: The Network Adapter could not establish the connection. : SQLException: The Network Adapter could not establish the connection"
I can get into my Oracle database using TOAD with same IP address, user name and password. Could anybody tell me what should I do? Thanks a lot!
Charles

Hi,
Check with your network team, network conenction between PI and Data base not working , Network team have to open Data base system ports inorder connect PI System.
check with Basis team about network connectivty,like they are bale to ping Data base server ip or not.
please go through below thread,
SQLException: Io exception: The Network Adapter could not establish the con
regards,
ganesh.

Error saving JCA Connection factory in PI NWA

Hi All,
I am facing an issue in SAP PI NWA for creating a JCA connection factory so that I can use the user module to convert IDOCs to flat file. we are on SAP PI 7.11 sp06....
error details : CF_XD1_180 failed due to: Can not add connection factory '', Reason: . See the log file for more details.
The logs details : com.sap.engine.services.connector.exceptions.ConnectorException: Connector remote administration failed, reason: "Can not set authentication user store "null" in security context "CF_XD1_180" for connector "CF_XD1_180" in application "sap.com/tc~sapjra".".
at com.sap.engine.services.connector.deploy.ConnectorContainerImpl.addComponent(ConnectorContainerImpl.java:1005
i posted this in SAP PI forum also...
Error saving connection factory
Regards
ashutosh r

Hello Carme,
From the error , I can see that the name of the JCA Connection Factory that you are trying to create in NWA is: "MRD_300".
This beautiful blog by William will surely help you rectify the problem.
/people/william.li/blog/2009/04/01/how-to-use-user-module-for-conversion-of-idoc-messages-between-flat-and-xml-formats
Kindly check if you have done the following in your configuration:
1. Copy and create new dependent JCA Connection Factory from the JCA resource: "SAPJavaResourceAdapter15"
2. You have to go to the "Configuration Properties" tab (and not Security tab) of your JCA connection Factory (MRD_300) to enter the credentials that will be used by this CF. Make sure that you enter the details properly. Eg. In your case, just check if the password is entered.
3. Also, check if the JCA resource "SAPJavaResourceAdapter15" is up and running (green traffic light). Else, restart the corresponding Java Service from NWA -> Operations Management -> Start & Stop -> Java Services
I hope this should solve your problem.
Regards, Gaurav.

Error when creating connection with SSO Authentication mode

Hi All,
when I am creating the connection with Authentication Mode as SSO, I get error "Unable to connect to SAP BW Server User abc has no RFC Authorization for function group SYST".
When I am craeting connection with specific user id and Password it works fine.
Pls. let me know whats the problem with creating connection with SSO.
System Info: BOXIR.3.1 Sp3, SAP 7.1
Regards,
Nisha

Yes, I have installed Integration Kit, and configured the SSO.
I am able to login into designer with Authentication as SAP.
But, the Problem is with connection creation with SSo authentication mode.
Is there any property or role needs to be defined for the universe designer Group or user, so that SSO is allowed in authentication mode?
Regards,
Nisha

Getting error message when connecting with DI

Hi all
i'm getting error code -8006 and error message: Resource Error. when i try to connect to the company db using the method connect() of the object Company.
does anyone knows what causes the problem and if so how to fix it?
appreciate the help
Yoav

Hi, Yoav.
I think it's the better to start with the SAP Notes search. The first that matches your error is <a href="https://websmp105.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=872933&_NLANG=E">here</a>.
hth

My c5180 no longer prints from my laptop. an error message comes up with ink system failure

My printer still prints but it will not print from my laptop. We've checked all the connections, replaced all the ink because it said that ink had expired. An error message comes up ink system failure.

Try the troubleshooting steps in this page.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Error "502" in connection with iCal ?

When I swich to my session (we have 3 sessions on our Mac), I receive following message:
The server responded with error
The request for account "rogers.com" failed.
The server responde with "502" to operation
CalDAVAccountRefreshQueuebleOperation
After that I have to go "Online" to Sync with my other devices. I am at loss as what to do about it.

im in the same boat. My regular internet is fine, fast as always and connected. No problem on another XP machine. but my vista is screwed. I have heard horror stories about iTunes and vista any advice people?? Apple? Because if they are not compatitatble im going to be extreamly disappointed. Any reply would be nice. Thanks!

Error 12545 on Connecting with sqlplus to Database. Remote connect hangs.

Hi there,
i'am new to Oracle.
After installing 11g on Windows 2008 x64 Server i had solved many Problems. But this Problem now i do not get fixed.
If i connect through SQLPlus local to DB it works. But if i connect on client (Win XP Service Pack 3) it hangs.
Firewalls are turned off.
Ping and TNSping works fine.
Listener.ora:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = D:\app\Administrator\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:D:\app\Administrator\product\11.2.0\dbhome_1\bin\oraclr11.dll")
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = de0-vsidcoes-p1)(PORT = 1521))
ADR_BASE_LISTENER = D:\app\Administrator
tnsname.ora:
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
INDACO11 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = de0-vsidcoes-p1)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = INDACO11)
sqlnet.ora:
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
Alert.log:
Fatal NI connect error 12545, connecting to:
(LOCAL=NO)
VERSION INFORMATION:
     TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
     Oracle Bequeath NT Protocol Adapter for 64-bit Windows: Version 11.2.0.1.0 - Production
     Windows NT TCP/IP NT Protocol Adapter for 64-bit Windows: Version 11.2.0.1.0 - Production
Time: 09-APR-2013 10:10:33
Tracing not turned on.
Tns error struct:
ns main err code: 12545
TNS-12545: CONNECT nicht erfolgreich, da Ziel-Host oder -Objekt nicht vorhanden
ns secondary err code: 12560
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
opiodr aborting process unknown ospid (2208) as a result of ORA-609
Listener.Log:
09-APR-2013 10:10:33 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=indaco11)(CID=(PROGRAM=D:\app\Cyber\product\11.2.0\client_1\sqlplus.exe)(HOST=XPSUPCLNT)(USER=Cyber))) * (ADDRESS=(PROTOCOL=tcp)(HOST=169.254.238.212%11)(PORT=1047)) * establish * indaco11 * 0
lsnrctl services
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 09-APR-2013 10:35:31
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Anmeldung bei (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
Services ▄bersicht...
Dienst "CLRExtProc" hat 1 Instanzen.
Instanz "CLRExtProc", Status UNKNOWN, hat 1 Handler f³r diesen Dienst...
Handler:
"DEDICATED" eingerichtet:0 abgewiesen:0
LOCAL SERVER
Dienst "INDACO11XDB" hat 1 Instanzen.
Instanz "indaco11", Status READY, hat 1 Handler f³r diesen Dienst...
Handler:
"D000" eingerichtet:0 abgewiesen:0 aktuell:0 max:1022 Status:ready
DISPATCHER <machine: DE0-VSIDCOES-P1, pid: 1296>
(ADDRESS=(PROTOCOL=tcp)(HOST=de0-vsidcoes-p1)(PORT=49168))
Dienst "indaco11" hat 1 Instanzen.
Instanz "indaco11", Status READY, hat 1 Handler f³r diesen Dienst...
Handler:
"DEDICATED" festgelegt:3 abgelehnt:0 Status:ready
LOCAL SERVER
Der Befehl wurde erfolgreich ausgef³hrt.
lsnrctl status
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 09-APR-2013 10:36:05
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Anmeldung bei (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS des LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Production
Startdatum 09-APR-2013 10:02:57
Uptime 0 Tage 0 Std. 33 Min. 8 Sek.
Trace-Ebene off
Sicherheit ON: Local OS Authentication
SNMP OFF
Parameterdatei des Listener D:\app\Administrator\product\11.2.0\dbhome_1\network\admin\listener.ora
Log-Datei des Listener d:\app\administrator\diag\tnslsnr\de0-vsidcoes-p1\listener\alert\log.xml
Zusammenfassung Listening-Endpunkte...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=de0-vsidcoes-p1)(PORT=1521)))
Services ▄bersicht...
Dienst "CLRExtProc" hat 1 Instanzen.
Instanz "CLRExtProc", Status UNKNOWN, hat 1 Handler f³r diesen Dienst...
Dienst "INDACO11XDB" hat 1 Instanzen.
Instanz "indaco11", Status READY, hat 1 Handler f³r diesen Dienst...
Dienst "indaco11" hat 1 Instanzen.
Instanz "indaco11", Status READY, hat 1 Handler f³r diesen Dienst...
Der Befehl wurde erfolgreich ausgef³hrt.
Variables are set to:
ORACLE_HOME=D:\app\Administrator\product\11.2.0\dbhome_1
ORACLE_SID=INDACO11
TWO_TASK=INDACO11
I hope this is all information you need.
Any Idea to solve this problem?
Thanks!
Jens
Edited by: 998906 on 09.04.2013 01:40
Edited by: 998906 on 09.04.2013 01:53

Ok. Sorry, i solved this.
Set the local_listener helps:
alter system set local_listener='(ADDRESS=(PROTOCOL=TCP)(HOST=169.254.154.98)(PORT=1521))' sid='INDACO11';
Thanks!

Activesync of mail and calendar fails. Error message says connection with server is successful. Incorrect version accessed. Has anyone encountered this problem and figured out cause or solution?

Wireless connection through Versamail using Exchange Active Sync.
Post relates to: Treo 650 (Sprint)

I am having the exact same issue. I am running Windows Server 2003 SBS Premium with Exchange 2003 SP1 and the subsequent KB update installed.
I am currently thinking that this is related to the fact that I have issued my own SSL certificate for the site. I haven't been able to find a way to install a custom Certificate Authority to be trusted.
http://www.palmone.com/us/products/smartphones/treo650/activesync-faqs.epl says that "Companies that require the use of custom-made or SSL certificates signed by a trusted authority may have trouble using palmOnes implementation of Exchange ActiveSync." Has anyone who issues their own certs gotten Exchange Activesync to work properly? murph2 - Have you issued your own certificates?

Error 1858: The connection with Remote Managment Agent had timed out.

Every workstations seem the same result. I cannot remote or execute file.
Please help me. Thanks
Ps. All of them install Zenwork 6.5 Agent only ,which was deployed at the
sub branch, connected to the same server which using NAT IP address.

On Thu, 16 Dec 2004 11:54:47 GMT, [email protected] wrote:
> Ps. All of them install Zenwork 6.5 Agent only ,which was deployed at the
> sub branch, connected to the same server which using NAT IP address.
hmm.. same issue like your other mail?
Marcus Breiden
Please change -- to - to mail me.
The content of this mail is my private and personal opinion.
http://www.edu-magic.net

Error on JCA connection with R/3 (Failure: ConnctorService)

Similar Messages

Maybe you are looking for