Error on starting GP process

Hello,
I get this error sometimes while starting a new GP Process on portal and sometimes it runs through fine :
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: View container UI element frameworkComponent4 in view VerticalContainerView of component VerticalContainer represents view container 172620045_0 which does not contain a view
Any help would be highly appreciated.
Anil

Hi Anil,
it seem that you have deleted some of the GP Portal Content.
1. Go to Content Administration tab, browse Portal Content > Content
provided by SAP > Platform Add-Ons, then delete the whole Guided
Procedures Folder.
2a. If you run NW 7.0, redeploy the latest SAP_EU.sca for your SP through SDM, using the update all
deploy option.
2b. If you run NW CE 7.10, redeploy GP-PP through NWDI, using the update all
deploy option.
3. Go back, re-assign GP roles to your user and test again.
Best regards,
George.

Similar Messages

Error during start of process in Inegration Process

Hi,
My scenario is file to integration process and back.
Message is not entering my integration process. In sxmb_moni it shows a green falg at the queue and when you click on 'PE', we are taken to the inbound queue with 'SYSFAIL'.
The error description at the trace is 'Error during start of process'.
There are no errors in sxi_cache for the particular integration process. The return code is '0'. I have tried re-activation too and tested again. But to no avail.
There are no entries in swwl, since the message has not even entered integration process.
Kindly help me to correct the error.
Thanks,
John

Hi,
Yes the the 'Start Process' is checked.
Steps in BPM.
Receive step, transformation step to a multiline element, a block for sending each line in the multiline, a container operation for appending (also inside the block) and finally another transforamtion and send step.
But since the message has not even entered the send step, it is not of much use to know all steps
Thanks,
John

Error during start of process of type

Hi All,
One of my BPM scenario was strucked every weekend in the queue (SMQ2) and say the error called " Error during start of process of type WS91000041"
I observed the Queue messages, due to the error from database system for particular record,
In my BPM there is Exception Branch in the block step in case of Database connection error, Why it was strucked in the queue in case of error in the Database?
Why it doesn't the goes to exception branch?
Kindly suggest me how i can approach here.
Thank you very much.
Regards,
Sateesh

Hello All,
Again,
Could you please suggest me above my problem.I am looking forward from you.
Thank you.
Kindest Regards,
Sateesh
Edited by: sateesh kumar .N on Oct 11, 2011 10:39 AM

Error in starting MRP process in Standby database.

Hi All,
OS:Windows server 03
DB:11g
I am creating a Standby database, everything is fine until i fire the below command to start the MRP process to start the recovery of the database.
alter database recover managed standby database disconnect from session;MRP0 started with pid=27, OS id=6640
2013-02-07 17:59:48.515000 +05:30
started logmerger process
Managed Standby Recovery not using Real Time Apply
Errors in file d:\app\oracle\diag\rdbms\testdr\testdr\trace\testdr_dbw0_6000.trc:
ORA-01157: cannot identify/lock data file 1 - see DBWR trace file
ORA-01110: data file 1: 'D:\APP\ORACLE\ORADATA\TEST\TEST\SYSTEM01.DBF'
ORA-27086: unable to lock file - already in use
OSD-00002: additional error information
O/S-Error: (OS 32) The process cannot access the file because it is being used by another process.
Errors in file d:\app\oracle\diag\rdbms\testdr\testdr\trace\testdr_dbw0_6000.trc:
ORA-01157: cannot identify/lock data file 2 - see DBWR trace file
ORA-01110: data file 2: 'D:\APP\ORACLE\ORADATA\TEST\TEST\SYSAUX01.DBF'
ORA-27086: unable to lock file - already in use
OSD-00002: additional error information
O/S-Error: (OS 32) The process cannot access the file because it is being used by another process.
Errors in file d:\app\oracle\diag\rdbms\testdr\testdr\trace\testdr_dbw0_6000.trc:
ORA-01157: cannot identify/lock data file 3 - see DBWR trace file
ORA-01110: data file 3: 'D:\APP\ORACLE\ORADATA\TEST\TEST\UNDOTBS01.DBF'
ORA-27086: unable to lock file - already in use
OSD-00002: additional error information
O/S-Error: (OS 32) The process cannot access the file because it is being used by another process.
Errors in file d:\app\oracle\diag\rdbms\testdr\testdr\trace\testdr_dbw0_6000.trc:
ORA-01157: cannot identify/lock data file 4 - see DBWR trace file
ORA-01110: data file 4: 'D:\APP\ORACLE\ORADATA\TEST\TEST\USERS01.DBF'
ORA-27086: unable to lock file - already in use
OSD-00002: additional error information
O/S-Error: (OS 32) The process cannot access the file because it is being used by another process.
MRP0: Background Media Recovery terminated with error 1110
Errors in file d:\app\oracle\diag\rdbms\testdr\testdr\trace\testdr_pr00_7984.trc:
ORA-01110: data file 1: 'D:\APP\ORACLE\ORADATA\TEST\TEST\SYSTEM01.DBF'
ORA-01157: cannot identify/lock data file 1 - see DBWR trace file
ORA-01110: data file 1: 'D:\APP\ORACLE\ORADATA\TEST\TEST\SYSTEM01.DBF'
Recovery Slave PR00 previously exited with exception 1110
Errors in file d:\app\oracle\diag\rdbms\testdr\testdr\trace\testdr_mrp0_6640.trc:
ORA-01110: data file 1: 'D:\APP\ORACLE\ORADATA\TEST\TEST\SYSTEM01.DBF'
ORA-01157: cannot identify/lock data file 1 - see DBWR trace file
ORA-01110: data file 1: 'D:\APP\ORACLE\ORADATA\TEST\TEST\SYSTEM01.DBF'
Completed: alter database recover managed standby database disconnect from session
Can anyone tell me why is this comming?
Regards,
Sphinx

Hi ,
Yes, it is on the same server.
I have used the below mentioned parameters to rename the files
At Primary Pfile:
*.db_file_name_convert=('D:\app\oracle\oradata\test\test\','D:\app\oracle\testdr\oradata\datafiles\')
*.log_file_name_convert=('D:\app\oracle\oradata\test\test\','D:\app\oracle\testdr\oradata\redologs\')
At Standby:
*.db_file_name_convert=('D:\app\oracle\testdr\oradata\datafiles\','D:\app\oracle\oradata\test\test\')
*.log_file_name_convert=('D:\app\oracle\testdr\oradata\redologs\','D:\app\oracle\oradata\test\test\')
But the output of v$datafile at standby is showing the path of Primary datafiles
I manually tried recovering them but it is prompting me the same error.
Regards
Edited by: $phinx19 on Feb 7, 2013 6:23 AM

Error when starting a Process

Hi everyone,
I am using NetWeaver 7.0 SP13, and I am trying to start a process that was created previously, however I get the following exception:
com.sap.caf.eu.gp.exception.api.GPEngineException: Error filling role role.administrator of role type 3 during instantiation at
com.sap.caf.eu.gp.process.rt.impl.GPRuntimeManager.checkRoleList(GPRuntimeManager.java:307) at
com.sap.caf.eu.gp.process.rt.impl.GPRuntimeManager.startProcess(GPRuntimeManager.java:125) at
com.sap.test.process.StartProcess.startProcess(StartProcess.java:311) at
com.sap.test.process.wdp.InternalStartProcess.startProcess(InternalStartProcess.java:153) at
com.sap.test.process.view.StartProcessView.onActionstartProcess(StartProcessView.java:145) at
com.sap.test.process.view.wdp.InternalStartProcessView.wdInvokeEventHandler(InternalStartProcessView.java:140)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87) at om.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67) at
com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420) at
com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132) at
Here is the code I´m using, the line that rises the exception is this:
rtm.startProcess(process,
                         "API test by me", "This process has been started by me... :p",
                         user, roles, params, user);
The error reported above is " role role.administrator of role type 3" which I do not understand or found information
about it on help.sap.com.
          IWDClientUser wdUser = WDClientUser.getCurrentUser();
          user = wdUser.getSAPUser();
          IGPUserContext userContext2 = GPContextFactory.getContextManager().createUserContext(user);
          IGPProcess process =GPProcessFactory.getDesigntimeManager().getActiveTemplate( processId, userContext2 );
          IGPRuntimeManager rtm = GPProcessFactory.getRuntimeManager();
          IGPProcessRoleInstanceList roles = rtm.createProcessRoleInstanceList();
          int rolenum = process.getRoleInfoCount();
          for (int i = 0; i < rolenum; i++) {
               IGPProcessRoleInstance roleInstance = roles. createProcessRoleInstance(process.getRoleInfo(i).getRoleName());
               roleInstance.addUser(user);
               roles.addProcessRoleInstance(roleInstance);
          params = GPStructureFactory.getStructure(process.getInputParameters());
          wdComponentAPI.getMessageManager().reportSuccess( params.toString() );
          String name = process.getAdminRole().getRoleName();
          IGPProcessRoleInstance roleInstance = roles.createProcessRoleInstance(name);
          roleInstance.addRuntimeDefinedUser(user);
          roles.addProcessRoleInstance(roleInstance);
          Date date2 = new Date();
          params.setAttributeValue("data", date2);
          rtm.startProcess(process,
                         "API test by me", "This process has been started by me... :p",
                         user, roles, params, user);
Thanks in advance!
Cheers,
Francisco

-> press '''CTRL''' + '''SHIFT''' + '''ESC''' to Open Task Manager -> Processes tab -> right-click '''firefox.exe''' and click '''End Process Tree''' -> close Task Manager
Troubleshooting extensions and themes
* https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
Troubleshooting plugins
* https://support.mozilla.com/en-US/kb/Troubleshooting%20plugins
Check and tell if its working.

Random SP2 error when starting oracle process through SHELL script

Hi All,
I am trying to process data in n-Number of tables through a package. The package is called through a shell script to create start data processing. All calls to the package are in a sql script which is basically exec calls-
exec package.process ('T1','some param');
exec package.process ('T1','some param');
exec package.process ('T..n','some param');
I have a shell script which I use to execute commands from the sql script. There is a reason behind using shell script. For some strange reason, I keep on getting -
ERROR: logon denied - check for valid user with valid privileges
SP2-0640: Not connected
SP2-0641: "EXECUTE" requires connection to server
SP2-0640: Not connected
for some EXEC calls. Problem is, errors are generated at random. So in one run, I get error for T10,T11 and then in next run I might get for some other tables.
However, when I am running the sql script from the sql prompt, all calls to the package are executed without any problem.
This makes me think, it is something to do with the way database connection being initiated through UNIX.
Has anyone faced similar issue? Your help/gudence is much appreciated.
DB: Oracle 10.2.0.5
OS: SUN Solaris 10
Thanks in advance.

Login credentials are provided inside the shell script.
I did put a sleep(10) after EOF but no help. As mentioned if I run script file from sql promt, it runs without any hiccup. So it is the connection through the UNIX that is causing issue.
As pointed out by Sybrand, I agree that it does not make a sense to connect and commit after every sql statement. So decided to change the shell script and so far, the result from my initial tests on a sample data is quite encouraging. Hopefully I will have a solution.
But it will be nice to know why SHELL is doing what it is doing!!
Legacy prog are sometime big time eye-openers..;)

Error to start Extract Process....

hi,
when i am trying to start DataPump process then it send me the error.
GGS ERROR ZZ-0KL The trail './dirdat/ta' is not assigned to extract 'EPMP2'. Assign the trail to the extract with the command "ADD EXTTRAIL/RMTTRAIL ./dirdat/ta, EXTRACT EPMP2.
cant' start all the procees..
help????

Hi,
This problem related to assigning the trail file to pump process, Make sure the below steps which you have configured correctly,
Primary Extract:
GGSCI > ADD EXTRACT <ext name>, TRANLOG, BEGIN NOW
GGSCI > ADD EXTTRAIL <path of local trail file in source server > , EXTRACT <above same ext name >
For data pump process(secondary extract):
GGSCI > ADD EXTRACT <pump name > , EXTTRAILSOURCE < above same local trail file path >
For remote trail :
ADD RMTTRAIL < path of remote trail file, which is the path in remote server > , EXTRACT < above pump name>
Hopefully this will help you
Annamalai.

Error in starting new process in GP

Hi All
I am facing a problem is starting a new GP process dynamically.
On the following step I get a GP InvocationException
IGPUserContext userContext =GPContextFactory.getContextManager()
.createUserContext(processUser);.
Message:
ERROR_ALREADY_STOPPED
com.sap.caf.eu.gp.base.exception.InvocationException: ERROR_ALREADY_STOPPED
at com.sap.caf.eu.gp.base.caching.MemoryCache.checkActive(MemoryCache.java:231)
at com.sap.caf.eu.gp.base.caching.MemoryCache.getEntry(MemoryCache.java:282)
at com.sap.caf.eu.gp.model.context.impl.UserContextFactory.getUserContext(UserContextFactory.java:195)
at com.sap.caf.eu.gp.model.context.impl.UserContextFactory.getUserContext(UserContextFactory.java:181)
at com.sap.caf.eu.gp.context.impl.GPUserContext.<init>(GPUserContext.java:85)
I tried to restart the Server, even that does not help.
Please help
Deepu

hi deepu
check this
http://help.sap.com/saphelp_nw04s/helpdata/en/44/7a056cdb0b6573e10000000a11466f/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/43/fcdf77fc6510b3e10000000a11466f/frameset.htm
Can't start GP process by GP API
let me know u need any further info
bvr

Error while starting the process

Hello,
I created a process and when running it in Runtime get the following error for every Action :
Cannot display the iView. The iView may have been removed, the path may be incorrect, or you may not have permission to access
I think so I have all the required Guided Procedures Roles on the Portal...
Please let me know how to fix this error...
Thanks in advance

Hi Anil,
it seem that you have deleted some of the GP Portal Content.
1. Go to Content Administration tab, browse Portal Content > Content
provided by SAP > Platform Add-Ons, then delete the whole Guided
Procedures Folder.
2a. If you run NW 7.0, redeploy the latest SAP_EU.sca for your SP through SDM, using the update all
deploy option.
2b. If you run NW CE 7.10, redeploy GP-PP through NWDI, using the update all
deploy option.
3. Go back, re-assign GP roles to your user and test again.
Best regards,
George.

Error in starting form processing................

Hi all
     I am trying to print one adobe form, but it is giving error
     I tryed with standard program
       FP_TEST_00 it is throwing message FPRUNX001 error while clicking on print preview.
   when i tried with FP_TEST_PDF_00, it is sucess, and giving me PDF document version.
when i am trying with FP_GET_LAST_ADS_ERRSTR, it is saying that it is giving error "Program FP_GET_LAST_ADS_ERRSTR does not exist"
Please help me solving this one.......
Regards
Pradeep P N

Hello,
this is a problem of the destination service. Please use the search function. This has been discussed here many times.
Best regards,
Dezso

"Permanent Error in BPE inboubd Processing" if payload is incomplete

hi all,
I have an BPM scenario and when payload is wrong or some field in the payload is missing i am getting "Permanent Error in BPE inboubd Processing" error. I have searched on SDN for same and found two blogs which might be helpful
/people/henrike.kaiser/blog/2009/02/03/how-to-analyze-stopped-queues-in-xi-ccbpm
/people/shabarish.vijayakumar/blog/2005/12/07/transformation-error-and-still-stuck
As per blog : /people/henrike.kaiser/blog/2009/02/03/how-to-analyze-stopped-queues-in-xi-ccbpm,
when i execute the function u2018Display Traceu2019
Data is coming as: 16 31 21.04.2010 - 12:06:37.0810000 DATA SWF_INB EXCEPTIONS WF-BATCH X Error during start of process of type WS90100001 by message 0050569F4A4E1DDF93A20375C360F54F WS90100001 XBQO$PE_WS90100001 0050569F4A4E1DDF93A20375C360F54F
when i execute the function u2018Simulate Message Delivery' it is coming as: Result of simulation: Message starts a new process
What is the meaning of this?
I have a transformation step in BPM only. Is there any validation of data performed before message is passed to BPM?
Thanks,
Mayank

Hi Maynak,
Whenever you will put incorrect data or missed any mandatory field to be created on target side then this error will occur .
Take the input and chek in the mapping test of IR and correct your source message.
In this situation we can do these two things if we are not in Production server.
1. Delete the errored queue and re trigger the message after correcting the source XML
2. Even if correcting the mapping error also again its not working then go to SWWL and delete all the process instaces and again re trigger the message .
It will work. As per my knowledge in PI7.0 the XML validation option is not available .
Regards,
Saurabh

Dreaded "Operations Manager failed to start a process" error (2012 R2)

I know this error has been covered many times, and on many topics, but this time mine is slightly different.   It's
NOT the
"SCOMpercentageCPUTimeCounter" error covered by Kevin Holman.
Also, I am running SCOM 2012 R2 UR4 (7.1.10226.1046) and everything seems correctly patched (MS and agents), like
suggested by Nicole Welch and Kevin Holman as well.
So my environment is a fresh installation of SCOM 2012 R2, and I am transferring to this new Management Group, the monitored servers from our old SCOM 2012 "R1" (which I did not upgrade but rather made a brand new independent install). So
all servers aren't migrated yet, but I would like to solve this error before. This error did NOT happen in "R1", nor was it overridden (I imported the exact same Management Packs anyway).
On 2012 R2, it happens on almost all new monitored machines, mainly Read-Only Domain Controllers (RODCs).
Here is the kind of alert text I am getting:
Het om 10:10:15 gestarte proces is beëindigd als gevolg van een uitvoerverzamelfout als gevolg van fout 0x80070057 :
The parameter is incorrect.
; mogelijk zijn er gegevens verloren gegaan.
Opdracht die is uitgevoerd: "C:\Windows\system32\cscript.exe" //nologo "C:\Program Files\Microsoft Monitoring Agent\Agent\Health Service State\Monitoring Host Temporary Files 193\24788\AD_Global_Catalog_Search_Response.vbs"
RODC02.mydomain.be (objectCategory=DMD) false 4 {9E253FCB-8AAF-491F-CCA3-E632C6C2800C}
Werkmap: C:\Program Files\Microsoft Monitoring Agent\Agent\Health Service State\Monitoring Host Temporary Files 193\24788\
Dit is van invloed op een of meer werkstromen.
Werkstroomnaam: Microsoft.Windows.Server.2008.AD.DomainController.GCSearchTime.Monitor
Exemplaarnaam: RODC02
Our servers have Belgian (Dutch) regional settings, hence the language. But check out the highlighted info in bold.
The related event Number (in Alert Context) is 21404. Most other articles about this, mention 21402 or 21403. I suppose they all must be related but still, it's a new one here.
There you have the failing VBS file. I checked all alerts and there seem to be different files concerned overall. Other examples:
C:\Program Files\Microsoft Monitoring Agent\Agent\Health Service State\Monitoring Host Temporary Files 233\22737\AD_Database_and_Log.vbs    (from almost all RODCs)
C:\Program Files\Microsoft Monitoring Agent\Agent\Health Service State\Monitoring Host Temporary Files 196\19876\Microsoft.Windows.Server.Legacy.FreeSpace.vbs
(also from an RODC)
C:\Program Files\Microsoft System Center 2012 R2\Operations Manager\Server\Health Service State\Monitoring Host Temporary Files 5891\338282\Microsoft.Windows.Server.CPUUtilization.Monitortype.vbs 95 15
SCOM02.mydomain.be 1.4119384288787842     (this one is from my second Management Server..)
Repeat count of the alert is 1 to 2 a day, so it's not nightmareish, but still, requires to be fixed. I suspect that even if there is a different VBS file concerned, since the eventID and the alert text are the same, the repeat count will just increase,
not showing the last actual VBS concerned.
I connect to each of these servers, and browse to the directory containing the file, and the folder is there, the file is there. The error text mentions incorrect parameters but they still seem OK to me.
I found something which might be worth noting: when browsing to the directory, be it on an RODC or on the SCOM server, I get a permission popup requiring some admin rights to do so - although I am using my domain admin (+SCOM+SQL+local
admin everywhere) account:
SCOM services use the Local System account to run, on every machine. I thought Local System shouldn't be concerned with these permissions popups, but normally the domain/local admins aren't either, yet I am.
The "Health service" folder is the only one from the "C:\Program Files\Microsoft Monitoring Agent\Agent" folder to be concerned with this; I can browse without trouble to any other directory there.
After a SCOM service stop, I renamed the "Health Service state" folder (as you can see on the screenshot, there is a "Health Service State bak" folder) and let the service recreate it after a restart, to ensure it was clean and with
appropriate permissions , but it doesn't help.
Might that be a clue?
Or else what? I'm getting confused and don't find a suitable solution.
dd
Bix

On Thu, 4 Dec 2014 14:20:22 +0000, Bixessss wrote:
I know this error has been covered many times, and on many topics, but this time mine is slightly different.   It's*NOT* the "SCOMpercentageCPUTimeCounter" error covered by Kevin Holman <http://blogs.technet.com/b/kevinholman/archive/2010/02/23/a-new-script-error-scompercentagecputimecounter-vbs-invalid-class.aspx>.
Also, I am running *SCOM 2012 R2 UR4* (7.1.10226.1046) and everything seems correctly patched (MS and agents), likesuggested by Nicole Welch <http://nicolewelchscom.wordpress.com/2013/10/01/operations-manager-failed-to-start-a-process/>
and Kevin Holman as well.
This forum is for security issues related to Windows Server and not for
System Center questions.
Post your question in one of the following forums:
https://social.technet.microsoft.com/Forums/systemcenter/en-US/home?category=systemcenteroperationsmanager
Thanks.
Paul Adare - FIM CM MVP
Never trust a computer you can't lift. - Stan Masor

Error in Start SAP system (Post Processing)

Hi.,
I got an error during IDES installation in the step "Start SAP system (Post Processing)".
The details of START.LOG is as follows
running sapstart.exe GML 00 xyz -wait
Start service SAP_00 on machine
OpenSCManager of
failed. Error#: 6
CreateNamedPipe for
\pipe\SAP_00 Failed, Extended Error #123
Start service SAP_00 on machine
OpenSCManager of
failed. Error#: 6
Start (StartSAPService) failed.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
Kindly help me out in this regard.
Thanks in Advance,
Sridhar

Sridhar,
Check the path for the profile (whether it is accessible or not). Just to make sure that system has been installed properly, you could try connection check to the database also.
Thanks.
regards,
Murali

ERROR   ORA-12514: TNS: unable to start extract process

Hi Experts,
I have installed Oracle Golden Gate in the below environment.But unable to start extract process
Primary site (source): This is production DB and up and running.
RAC 2 nodes
Oracle RAC 11.2.0.1.0
ASM
Oracle GoldenGate 11g Release 1 (11.1.1.0.0)
Enterprise Linux Server release 5.5 (Carthage)
Processor Type x64
OS 64 bit
target Site (destination):
Standalone single server - Non RAC
Oracle version 11.2.0.1.0
ASM
Oracle GoldenGate 11g Release 1 (11.1.1.0.0)
Enterprise Linux Server release 5.5 (Carthage)
Processor Type x64
OS 64 bit
Getting below error in logs while starting extract process:
RECOVERY: reset to initial or altered checkpoint.
2012-08-05 10:34:10 ERROR   OGG-00868 Oracle GoldenGate Capture for Oracle, aaa.prm: Attaching to
ASM server asm: (12514) ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor.
2012-08-05 10:34:10 ERROR   OGG-01668 Oracle GoldenGate Capture for Oracle, aaa.prm: PROCESS
ABENDING.[oracle@ ggate]$
Getting below error while connecting with asm instance directly:
[oracle@ admin]$ sqlplus sys@asm as sysasm
SQL*Plus: Release 11.2.0.1.0 Production on Sun Aug 5 11:16:11 2012
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Enter password:
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
[oracle@ ~]$ tnsping asm TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 05-AUG-2012 11:55
:42
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = xxx-
scan)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = ASM) (I
NSTANCE_NAME = +ASM1)))
OK (0 msec) Any help Please ?
Regards
LazyDBA
Edited by: LazyDBA11g on Aug 5, 2012 12:14 AM
Edited by: LazyDBA11g on Aug 5, 2012 11:25 PM
Edited by: LazyDBA11g on Aug 12, 2012 4:36 AM

Hello JK,
Thanks a lot for specific response.
SQL> select INST_ID, NAME, VALUE from gv$parameter where name like '%_listener%';
INST_ID NAME VALUE
1 local_listener (DESCRIPTION=(ADDRESS_LIST=(AD
DRESS=(PROTOCOL=TCP)(HOST=xxx_
data1-vip)(PORT=1521))))
1 remote_listener xxxdata-scan:1521
2 local_listener (DESCRIPTION=(ADDRESS_LIST=(AD
DRESS=(PROTOCOL=TCP)(HOST=xxx_
data2-vip)(PORT=1521))))
2 remote_listener xxxdata-scan:1521
If I add REMOTE_LISTENER pointing to SCAN ip address, Does it require DB bounce ? (Its production DB)
Regards,
LazyDBA
Edited by: LazyDBA11g on Aug 10, 2012 12:01 PM
Edited by: LazyDBA11g on Aug 12, 2012 4:48 AM

PROCESS CHAIN error "Incorrect start date"

hi sap gurus,
I have parent chain in that a newly created meta chain is creating problem.I am getting error in the process chains since two days i am not able to solve this.Can anybody try to help me.
error: Incorrect start date: 00.00.0000; Start time 00:00:00 RSM 847
After that the process chain is turning red,but when i manually execute the process chain its running properly.
Please help me its urgent.

hi gurus,
Its working fine now.
Solution:
first exchange the variant with the smae and then activate and run.After that it will work in the process chain.
Thanks a lot to every body,especially MOHAN KRISHNA,

Error on starting GP process

Similar Messages

Maybe you are looking for