Error on System.Linq.Enumerable. TakeIterator d__3a`1.MoveNext()

I have the following code to iterate over subwebs of a sharepoint site. If I debug it line by line, it never goes to my catchs.
however on the uls logs I have this exception which I dont know what it means or if I should worry
53b416d1-1497-4b40-beb5-cd261180ece8 Stack trace:
at Microsoft.SharePoint.SPWeb.get_Created()
at xx.SP.DMS.WebParts.WebParts.LastCreatedJobs.LastCreatedJobs.<>c__DisplayClass8.<LoadGridData>b__7(SPWeb d)
at System.Linq.EnumerableSorter`2.ComputeKeys(TElement[] elements, Int32 count)
at System.Linq.EnumerableSorter`1.Sort(TElement[] elements, Int32 count)
at System.Linq.OrderedEnumerable`1.<GetEnumerator>d__0.MoveNext()
at System.Linq.Enumerable.<TakeIterator>d__3a`1.MoveNext()
My code is as follows
private void LoadGridData()
try
String currentUrl = SPContext.Current.Site.Url;
var jobInfoList = new List<JobInfo>();
SPSecurity.RunWithElevatedPrivileges(delegate
using (var clientSiteCollection = new SPSite(currentUrl))
foreach (
SPWeb web in
clientSiteCollection.AllWebs.AsSafeEnumerable().Where(
c =>
c.AllProperties[Constants.WebProperties.General.WebTemplate] != null &&
c.AllProperties[Constants.WebProperties.General.WebTemplate].ToString() ==
Constants.WebTemplates.JobWebPropertyName).OrderByDescending(d => d.Created).Take(5)
if (web.DoesUserHavePermissions(SPContext.Current.Web.CurrentUser.LoginName,
SPBasePermissions.Open))
web.Dispose();
_lastCreatedJobsGrid.DataSource = jobInfoList;
_lastCreatedJobsGrid.DataBind();
catch (Exception ex)
LoggingService.LogError(LoggingCategory.Job, ex);
Any idea what could be the cause and solution if needed?
Follow me on Twitter <<<
levalencia Blog <<<

Few questions around your code.
1. jobInfoList variable has not assigned any data.
2. Why are you disposing the object in between the loop? Move that to outside.
3. Take below into different variable and use new variable in  foreach loop.
clientSiteCollection.AllWebs.AsSafeEnumerable().Where(
c =>
c.AllProperties[Constants.WebProperties.General.WebTemplate] != null &&
c.AllProperties[Constants.WebProperties.General.WebTemplate].ToString() ==
Constants.WebTemplates.JobWebPropertyName).OrderByDescending(d => d.Created).Take(5)
Bala

Similar Messages

  • Convert-WindowsImage.ps1 Could not load file or assembly 'System.Linq,..' error

    I tried the following:
    .\Convert-WindowsImage.ps1
    -SourcePath C:\Backups\All\Files\Windows8-ReleasePreview-64bit-English.iso -VHDFormat VHD -SizeBytes 52GB -VHDPath C:\AllSharedC\VPC\Win8.vhd
    and got the following error in the log.  .Net 4.0 full and WMF 3.0 RC are all installed.
    Log
    Windows PowerShell transcript start
    Start time: 20120601112809
    Username  : Sys\User
    Machine   : Sys (Microsoft Windows NT 6.1.7601 Service Pack 1)
    ERROR  : Could not load file or assembly 'System.Linq, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified.
    INFO   : Log folder is C:\Users\Byron\AppData\Local\Temp\Convert-WindowsImage\942fccac-662a-4b2a-bfa9-6831892cad5c
    INFO   : Done.
    Windows PowerShell transcript end
    End time: 20120601112809
    How can I solve this?

    Running on Win7 Ultimate with sp1. I'm sure I got all the prerequites installed.
    System Requirements
    Convert-WindowsImage can only be run on Windows 8 Consumer Preview, Windows 8 Release Preview, Windows Server 8 Beta, and Windows Server 2012 Release Candidate
    operating systems.
    Sorry man.  As per above

  • I have an alert message in disc utility. Error: storage system verify or repair failed. Problems were found with the partitian map which might prevent booting.

    While running verify disc in disc utility on 251 GB SSD SM256c Media I came up with this message: Alert system verify or repair failed. In the descriptions box of history it said, problems were found with the partitions map which might prevent booting. This is followed by a message in red reading, Error: Storage system verify or repair failed. At the time I was down loading raw pictures off my camera through a card reader across my computer to a relatively new 2TB Western Digital portable hard drive. after about 13 to 15 pictures downloaded that drive faileded. My Mac Book Air works fine, but i get this message now everytime I run disc verify on this disc. The Macintosh HD checks out fine.

    While running verify disc in disc utility on 251 GB SSD SM256c Media I came up with this message: Alert system verify or repair failed. In the descriptions box of history it said, problems were found with the partitions map which might prevent booting. This is followed by a message in red reading, Error: Storage system verify or repair failed. At the time I was down loading raw pictures off my camera through a card reader across my computer to a relatively new 2TB Western Digital portable hard drive. after about 13 to 15 pictures downloaded that drive faileded. My Mac Book Air works fine, but i get this message now everytime I run disc verify on this disc. The Macintosh HD checks out fine.

  • Error: Source system already exists. Message no. RSAR201. Points rewarded.

    Error: Source system already exists. Message no. RSAR201
    We have installed a BI 7.0 system recently and I am setting up the server to connect to SAP ERP.
    In TA SM59 a connection to the SAP ERP has been established. The “Remote Logon” is OK, (meaning clicking it nothing happens). The “Connection Test” is OK.
    According to the Best Practices paper: “B84: BI Connectivity” (B84)
    http://help.sap.com/bp_biv170/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
    I have done the following:
    In TA RSA1
    1.     Choose Modeling.
    2.     Choose Source Systems.
    3.     Select SAP in the window on the right.
    4.     Choose the Context menu (right mouse click).
    5.     Choose Create.
    6.     Make the following entries:
    Available destination: (The above tested connection)
    Background user in source system: RFCUSER (I created the user in ERP according to step 1.4 in “B84”)
    Password for source system: *****
    Background user in BI: RFCUSER (I created the user in BI according to step 1.4 in “B84”)
    Password for BI user: *****
    8.     In the dialog box Please log on as an administrator in the following screen choose Continue.
    9.     Log on to the Source System with your administrator user. Choose the correct client.
    10.     On the dialog box New Source System Connection choose Continue.
    THEN I GET THE ERROR:
    Source system already exists.
    Message no. RSAR201
    What is wrong? I cannot locate any SAP notes to help on this problem.
    Best regards,
    Carsten Pold

    Hello Carsten,
    just some guessing at this point...
    a)
    Is the connection really new? For example, was there another system connected to that ERP, maybe with the same logical name? Or was any of the two systems copied from another system?
    b)
    Authorisations issues in this process may result in strange error messages. Make sure that the admin user in step 9 really has SAP_ALL. There are a lot of complex activities that this user must be able to do (ALE management, RFC access etc.). To exclude issues with the RFCUSER users: If possible, give them SAP_ALL, too. Of course only temporarily for testing.
    c)
    I normally don't use existing RFC destinations. Usually, I let the system create those, too. So maybe it makes a difference if you remove the RFC destinations on both sides and try again. In that case, you will of course have to provide the RFC details when creating the source system connection...
    I hope this brings you forward a little...
    Regards,
    Christian!

  • Windows Server 2012 VSS error "The system writer is missing"

    Hello All,
    I have a HP server that I have just installed Server 2012 standard, SQL Server 2012 and Sharepoint 2013.
    When I try to take bare metal backup I get the error: "The system writer is missing", I have tried the backup as the local admin and domain admin.
    The backup will only work if I decide to back up C:, once I select "Bare Metal" or "System State" the backup fails.
    I have tried this solution: http://technet.microsoft.com/en-us/library/cc734021.aspx but have not had any luck yet.
    When I run the command "vssadmin list writers" I can not see "System Writer" listed.
    How can I add/turn on the System Writer?

    Hi,
    The system writer fails due to the fact that the trusted installer & system accounts are missing permissions to files in the directory %windir%\winsxs\filemaps\.
    To resolve this issue, please run the following commands from an administrative elevated Command Window:
    CD c:\windows\system32
    Takeown /f %windir%\winsxs\filemaps\* /a
    icacls %windir%\winsxs\filemaps\*.* /grant "NT AUTHORITY\SYSTEM:(RX)"
    icacls %windir%\winsxs\filemaps\*.* /grant "NT Service\trustedinstaller:(F)"
    icacls %windir%\winsxs\filemaps\*.* /grant "BUILTIN\Users:(RX)"
    For more information, please also refer to the following links:
    Discussion Forum FAQ: VSS System Writer is missing. 
    http://social.technet.microsoft.com/Forums/en-US/winserverfiles/thread/0b1eb10a-d666-4f5e-b657-c93b1d754a7f
    Failure during Windows Server 2008 System State Backup & System Writer Missing
    http://blogs.technet.com/b/chrad/archive/2009/11/18/failure-during-windows-server-2008-system-state-backup-system-writer-missing.aspx
    Regards,
    Arthur Li
    TechNet Community Support

  • MR11 error message system status CLSD is active

    MR11 fails with error message system status CLSD is active . How to clear the PO line item which gives error message in MR11 system status CLSD is active .

    If you are using an account assigned PO then possibly the order(PM order, internal order etc) to which your PO refers might have status as CLSD.
    Check and reverse the status.

  • Entries appearing in Service Tax Control Account due to Error in System

    Hello Experts,
         I am facing a problem in one particular GL i.e.Service Tax Control a/c
    error-Entries appearing in Service Tax Control Account due to Error in System
    entries are- Service tax control   a/c   -
    Dr. 21,621.86
                            To Service Tax Control a/c     Cr.      21,621.86
    My question is when i am making entry as Service tax Dr-21,621.86,Service Tax Cr.21,621.86,so it will adjust,and in FBL3N amt will show 0 but it was showing 21,621.86
    Plz Guide me asap,very urgent issue
    Thanks in Advance

    Dear,
    What was the balance before you posted the below entry?
    Also run FBl3N with correct date parameters..
    br,Vivek

  • Product Instance Registration Error Message: "System Failure: Error while retrieving xml file from database"

    Hi Planning installation Gurus,
    Did u get any luck to resolve this problem as i am also facing same problem "Error creating instance" during install of Planning 9.3.1. i tried 30-50 times reconfiguration every time same problem..
    OS: Vista Premium
    SQL Server 2005
    Essbase:9.3.1
    Error Message: "System Failure: Error while retrieving xml file from database"
    Details of error:::::::::::::::::::::::::
    at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
    Can not get JDBC connection for SYS external changed actions.
    Can not get JDBC connection.
    java.lang.NullPointerException
    at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
    at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
    wn Source)
    at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
    Can not get JDBC connection for SYS external changed actions.
    Can not get JDBC connection.
    java.lang.NullPointerException
    at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
    at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
    wn Source)
    at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
    Can not get JDBC connection for SYS external changed actions.
    Can not get JDBC connection.
    Pls provide Solution

    Hi John,
    though i am trying with SQl server authentication with different user but still status is same of planningSystemDB.properties
    SYSTEM_DB_DRIVER=hyperion.jdbc.sqlserver.SQLServerDriver
    SYSTEM_DB_URL=jdbc:hyperion:sqlserver://neeraj-PC:1433
    SYSTEM_DB_USER=windowsAuthentication
    SYSTEM_DB_PASSWORD=CAFBAEFNBGEAABHEDOADFKADACBGBIFHBLCDFBAFFH
    SYSTEM_DB_CATALOG=plandb
    SYSTEM_DB_TYPE=SQL
    INSTANCE=
    my steps:
    Using SQL Server Management Studio
    Changed Widows authentication to SQL server authentication mode
    In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties.
    On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
    In the SQL Server Management Studio dialog box, click OK to acknowledge the requirement to restart SQL Server.
    In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties.
    On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
    In the SQL Server Management Studio dialog box, click OK to acknowledge the requirement to restart SQL Server.
    To restart SQL Server from SQL Server Management Studio
    To enable the sa login by using Management Studio
    In Object Explorer, expand Security, expand Logins, right-click sa, and then click Properties.
    On the General page, you might have to create and confirm a password for the sa login.
    On the Status page, in the Login section, click Enabled, and then click OK.
    In Object Explorer, expand Security, expand Logins, right-click sa, and then click Properties.
    On the General page, you might have to create and confirm a password for the sa login.
    On the Status page, in the Login section, click Enabled, and then click OK.}}}
    anything else should i change.................

  • Pr 6 of CS6 failed to install due to language error.  System: Mac OS 10.9.4.  Any idea?

    Pr 6 of CS6 failed to install due to language error.  System: Mac OS 10.9.4.  Any idea?

    attach a screenshot of the error message.

  • Workflow Error Message: System Account - The Workflow could not set Content Approval Status

    This is the first time I try an approval workflow. I am using a template in MS Word and assigned an approval workflow to it. The approval workflow is only going to one person in this case.
    When I start the work flow the following 3 error messages show up:
    Workflow Error Message: System Account - The Workflow could not set Content Approval Status. Enable content moderation for this list and run the workflow again.
    Workflow Error Message: System Account - The e-mail message cannot be sent. Make sure the e-mail has a valid recipient.
    Workflow Error Message: System Account - The e-mail message cannot be sent. Make sure the outgoing e-mail settings for the server are configured correctly.
    Thank you for your kind guidance.

    Hi,
    For the first error: Did you set Content Approval in the workflow?  If so, see if you have it in the versioning settings of the list settings.
    For the second error: double check your recipient is set up as being valid.  Did you type in the email address or is it referring to a people picker field?  also, make sure that in the workflow for the email that you actually populated it in the
    To: field.
    for the third error: I suspect that either your farm is not configured for email.  Or, this error is a knock on from the second error.  If you get the second error rectified it may clear this error.  If not then double check the email settings
    for your farm.
    Johnathan Lightfoot

  • Gets error "-17502; System Level Exception" while running the custom Step in NI TestStnad 2010

    I have a custom teststand step which works like For loop in TestStand. Previously I was using LV 2009 and NI TestStand 4.2.1 and this step was working fine. Recently I upgraded my system to LV 2010 and TestStand 2010, since that it is not working.
    When I run the step it gives error "-17502; System Level Exception". I have attached error screenshot.
    I am using NIFlowControl.dll in this step.
    Please do the needful.
    Attachments:
    System Levle Exception error.JPG ‏25 KB

    The source code for NIFlowControl.dll ships with TestStand. Did you perhaps
    1) modify the code and rebuild this dll in teststand 4.2.1, but did not move your changes into the 2010 version and recompile the 2010 version?
    Or
    2) Move your 4.2.1 version of this dll to 2010 in which case it might be missing important code that exists only in the 2010 version. It's best to redo your code changes to the 2010 version and recompile that if needed.
    Also ideally your modified version of NIFlowControl.dll should be located in the teststand public directory rather than the program files directory.
    -Doug

  • Error "602" System error: AK Datapart too short

    Hi all,
    Ok, I have looked just about everywhere for an answer to this but to no avail...I even tried under a few rocks we have laying around.
    Anyway here it is:
    While running a compression in BW we get Error "602"  System error: AK Datapart too short.
    This is happening while doing a select statement during the compression of the infocube.  It does not happen all the time, just kind like when ever it feels like.  The only note I could find in OSS was one about Live Cache and it does not seem to apply.
    Here is the dump which I really hate doing this, but it gives all the info needed :
    untime Error          DBIF_DSQL2_SQL_ERROR
    Except.                CX_SY_NATIVE_SQL_ERROR
    Date and Time          08/15/2007 12:23:09
    ShrtText
    An SQL error occurred when executing Native SQL.
    What happened?
    Error "-602" occurred in the current database connection "DEFAULT".
    What can you do?
    Print out the error message (using the "Print" function)
    and make a note of the actions and input that caused the
    error.
    To resolve the problem, contact your SAP system administrator.
    You can use transaction ST22 (ABAP Dump Analysis) to view and administer
    termination messages, especially those beyond their normal deletion
    date.
    is especially useful if you want to keep a particular message.
    How to correct the error
    Database error text........: "System error: AK Datapart too short"
    Database error code .......: "-602"
    Triggering SQL statement...: "INSERT INTO "/BIC/EZPSD_C03" ( "KEY_ZPSD_C03P",
    "KEY_ZPSD_C03T", "KEY_ZPSD_C03U", "KEY_ZPSD_C031", "KEY_ZPSD_C032",
    "KEY_ZPSD_C033", "KEY_ZPSD_C034", "/BIC/ZNET_ASP" ) SELECT ? ,
    F."KEY_ZPSD_C03T", F."KEY_ZPSD_C03U", F."KEY_ZPSD_C031", F."KEY_ZPSD_C032","
    Internal call code.........: "[DBDS/NEW DSQL]"
    Please check the entries in the system log (Transaction SM21).
    You may able to find an interim solution to the problem
    in the SAP note system. If you have access to the note system yourself,
    use the following search criteria:
    "DBIF_DSQL2_SQL_ERROR" CX_SY_NATIVE_SQL_ERRORC
    "GP31VIZWJDTT90894L1IA5YAC7G" or "GP31VIZWJDTT90894L1IA5YAC7G"
    "TRANSFER_ALL"
    If you cannot solve the problem yourself and you wish to send
    an error message to SAP, include the following documents:
    1. A printout of the problem description (short dump)
    To obtain this, select in the current display "System->List->
    Save->Local File (unconverted)".
    2. A suitable printout of the system log
    To obtain this, call the system log through transaction SM21.
    Limit the time interval to 10 minutes before and 5 minutes
    after the short dump. In the display, then select the function
    "System->List->Save->Local File (unconverted)".
    3. If the programs are your own programs or modified SAP programs,
    supply the source code.
    To do this, select the Editor function "Further Utilities->
    Upload/Download->Download".
    4. Details regarding the conditions under which the error occurred
    or which actions and input led to the error.
    The exception must either be prevented, caught within the procedure
    "TRANSFER_ALL"
    "(FORM)", or declared in the procedure's RAISING clause.
    To prevent the exception, note the following:
    System environment
    SAP Release.............. "640"
    Application server....... "sdcbw03"
    Network address.......... "10.64.18.76"
    Operating system......... "Linux"
    Release.................. "2.6.9-55.ELsmp"
    Hardware type............ "x86_64"
    Character length......... 16 Bits
    Pointer length........... 64 Bits
    Work process number...... 21
    Short dump setting....... "full"
    Database server.......... "sdcbw03"
    Database type............ "ADABAS D"
    Database name............ "BWP"
    Database owner........... "SAPBWP"
    Character set............ "C"
    SAP kernel............... "640"
    Created on............... "Nov 5 2006 19:46:34"
    Created in............... "Linux GNU SLES-9 x86_64 cc3.3.3"
    Database version......... "SAPDB 7.5.0.030 "
    Patch level.............. "156"
    Patch text............... " "
    Supported environment....
    Database................. "MaxDB 7.5.0"
    SAP database version..... "640"
    Operating system......... "Linux 2.6"
    Memory usage.............
    Roll..................... 16192
    EM....................... 20949280
    Heap..................... 0
    Page..................... 24576
    MM Used.................. 9235016
    MM Free.................. 3331560
    SAP Release.............. "640"
    User and Transaction
    Client.............. 011
    User................ "ALEREMOTE"
    Language key........ "E"
    Transaction......... " "
    Program............. "GP31VIZWJDTT90894L1IA5YAC7G"
    Screen.............. "SAPMSSY0 1000"
    Screen line......... 6
    Information on where terminated
    The termination occurred in the ABAP program "GP31VIZWJDTT90894L1IA5YAC7G" in
    "TRANSFER_ALL".
    The main program was "RSPROCESS ".
    The termination occurred in line 573 of the source code of the (Include)
    program "GP31VIZWJDTT90894L1IA5YAC7G"
    of the source code of program "GP31VIZWJDTT90894L1IA5YAC7G" (when calling the
    editor 5730).
    The program "GP31VIZWJDTT90894L1IA5YAC7G" was started as a background job.
    Job name........ "BI_PROCESS_COMPRESS"
    Job initiator... "ALEREMOTE"
    Job number...... 12185102
    Processing was terminated because the exception "CX_SY_NATIVE_SQL_ERROR"
    occurred in the
    procedure "TRANSFER_ALL" "(FORM)" but was not handled locally, not declared in
    the
    RAISING clause of the procedure.
    The procedure is in the program "GP31VIZWJDTT90894L1IA5YAC7G ". Its source code
    starts in line 557
    of the (Include) program "GP31VIZWJDTT90894L1IA5YAC7G ".
    Source Code Extract
    Line
    SourceCde
    543
    ENDIF.
    544
    545
    COMMIT WORK.   " commit and close cursors
    546
    547
    l_str = i_max_requid.
    548
    PERFORM msg_append(saplrscondense)
    549
    USING    'S' '355' l_str space space space
    550
    CHANGING c_t_msg.
    551
    552
    ENDFORM.                               " CONDENSE_FACTTABLE_NEW
    553
    554
    555
         Form  TRANSFER_ALL
    556
    557
    FORM TRANSFER_ALL USING i_ref_update       TYPE rs_bool
    558
    i_pdimid           TYPE I
    559
    i_pdimid_ref_point TYPE rsd_sid
    560
    i_pdimid_normal    TYPE rsd_sid
    561
    i_recordtp         TYPE rsd_sid
    562
    CHANGING e_ref_ins_cnt TYPE I
    563
    e_ins_cnt     TYPE I
    564
    c_t_msg       TYPE rs_t_msg.
    565
    566
    CALL FUNCTION 'RSDU_INFOCUBE_INDEXES_DROP'
    567
    EXPORTING
    568
    I_INFOCUBE = 'ZPSD_C03'
    569
    I_FACTTAB  = '/BIC/EZPSD_C03'.
    570
    571
    572
    EXEC SQL.
    >>>>>
    INSERT INTO "/BIC/EZPSD_C03"
    574
    ( "KEY_ZPSD_C03P"
    575
    , "KEY_ZPSD_C03T"
    576
    , "KEY_ZPSD_C03U"
    577
    , "KEY_ZPSD_C031"
    578
    , "KEY_ZPSD_C032"
    579
    , "KEY_ZPSD_C033"
    580
    , "KEY_ZPSD_C034"
    581
    , "/BIC/ZNET_ASP"
    582
    583
    SELECT :i_pdimid_normal
    584
    , F."KEY_ZPSD_C03T"
    585
    , F."KEY_ZPSD_C03U"
    586
    , F."KEY_ZPSD_C031"
    587
    , F."KEY_ZPSD_C032"
    588
    , F."KEY_ZPSD_C033"
    589
    , F."KEY_ZPSD_C034"
    590
    , SUM( F."/BIC/ZNET_ASP" )
    591
    FROM "/BIC/FZPSD_C03" F
    592
    WHERE F."KEY_ZPSD_C03P" = :i_pdimid
    Any thoughts would be helpful,
    Thanks,
    David

    This error usually occurs when there is a database lock or no space in teh database. Got DB02 and Click on Space critical objects to see whether any entries are there. If yes contact your basis to increase the space.
    Hope this helps
    Thanks,
    Satish

  • Error : Logical System is not defined

    Hi Experts,
    I have installed SAP CRM 7.0 IDES . But when i am trying to exectute Transaction Code /nbp ( Business Partner Creation) system is giving an error 'Logical System is not defined ' and i am not able to execute the transaction.
    Kindly explain how to define the logical system.
    Regards,
    Rohit Tripathi

    Hello Rohit,
    To solve the problem you should proceed as described in the long text of the error message B2 001 and maintain the logical system for the current client via transaction SCC4.
    The reason for this error is that the ALE outbound of business partner is activated. If you don't want the ALE messages to be generated when business partner is changed then you can disable the ALE outbound. To do that, go the maintenance view CRMC_BUT_CALL_FU and disable the following function modules if active:
    BUPA_OUTBOUND_REL
    BUPA_OUTBOUND_ALE_REL
    I hope this could be helpful.
    Best regards,
    Maggie

  • 2011 macbook pro OSX maverick, error: storage system verify or repair failed

    Hi there,
    My 2011 Macbook pro which came with Lion but now upgraded to Maverick 10.9.5 has just crashed. It will start up in recovery mode but when I've gone to the apple logo to start up from disk, it shows the disk but doesn't start up from it I just get a grey screen.
    I'ved tried to verify and repair the disk and get message: 'The partition map needs to be repaired because there's a problem with the EFI system partitions file system'
    I also get: error, storage system verify or repair failed.
    S.M.A.R.T staus is verified
    None of the key commands for start up seem to work, ie - option - shift - command P,R etc.
    I can't re-install operating system as it is an older version, ie Lion and have updated to Maverick via APP store so no way of re-installing OSX.
    Any ideas???

    I have the same issue. Not able to fix it.

  • Error: Storage system verify or repair failed

    My MBP frooze a couple times yesterday; I loaded Disk Utillity and with the top level "122.33 GB APPLE SSD" selected I tried both "Verify Disk" and "Repair Disk." I get a pop up that says, "Alert: Storage system verify or repair failed." On the detailed section it states: "Problems were found with the parition map which might prevent booting. (In red letters) Error: Storage system verify or repair failed." When I select "Macintosh HD," I encounter no problems with Repairs or Verify Disks/Disk Permissions. I have always been able to select both and do the Verify/Repair options and haven't had any errors. I am running Lion and do have encrytption enabled. When I boot in recovery mode, I am able to Verify and Repair Disks on the "122.33 GB APPLE SSD" level without any problems. Only when I boot normally and attempt to Verify or Repair the top level. I am thinking its an encryption related error and not actually an issue. Any thoughts?

    My sert up looks simple in 10.6 and 10.7 disk utility             500GB Physical HD
                                     slightly to the right virtual volume partition (icon)1 Mountain Lion
                                                                                                            2 Lion
                                                                                                            3 Snowleopard
                                                                                                            4 empty
    In Lion Disk Utiity on First Aid if I choose 500HD and repair disk  In red it states alert storage system verify or repair failed disk permissions are greyed out that means they can not be clicked.
    If I choose Mountain lion (I am booted in Lion) it will repair permissions and veryfy and repair disk.
    If I choose Lion (I am booted in Lion) it will verify and repair permissions but only verify disk. NOT repair !
    ( it is said it can not repair itself so we need to be booted into lion recovery disk disk utilities)
    If I choose Snow leopard (I am booted in Lion) it will verify and repair permissions and verify and repair disk.
    In Mountain lion the partition map or set up is strange.
                                                                                 500GB Physical HD
                            slightly to the left virtual volume partition (icon) 1 Lion
                                slightly to the right virtual volume partition (icon) 2 Lion
                            slightly to the right virtual volume partition (icon) mountain Lion                     
                           slightly to the left virtual volume partition (icon) mountain Lion
                                                                                               3 Snowleopard
                                                                                               4 empty
    Do I have 6 partitions 2 Lions 2 Mountain lions?
    And on Mountain lion and lion on sub volume only FirstAid and Partition is shown not erase or restore !
    In Snow leopard disk utility Mountain lion and lion shows as incompatable so can even partitioned or repaired.
    When partitioning and installing 3 OSX's on 1 HD the partition table changes with Mountain lion and Lion.
    And if you have Vile fault turned on you can not access the Mountain lion and lion repair permissions and repair disk ,also can not access the recovery disk when booting using options.
    That means you have to turn Vilefault or Gate keeper off.
    Apple Japan said it does not support more than one OS per HD !
    It is a resl mess they do not fix these things and show photes and explanations of different scenrios on disk utility.
    we want to use all our OSX/s on the same machine because many applications do not work on different platforms.
    They should work out a solution when bring out new OS

Maybe you are looking for

  • Facetime on iphone and a mac can i use the same apple id

    i have a mac and iphone 4. I can receive facetime on my phone (email address) but not the mac. so i tried to change the facetime settings on my phone so that i receive facetime by phone number but it wont change. Im led to believe it email address fo

  • Blink while alarm on using shared variables with remote panel

    I am creating an application where I have front panel indicators data bound to shared variables.  I also set it up to have them blink when the alarm is on.  I am using the DSC module. This works great under the development environment.  But when I co

  • Batch management error while creating material

    Hi All, My client does not want to have qty updating and only value udating for his all materials. we are managing thro by removing qty updating tick for plants. Now issue is while craeting material master for semi finished material and while activat

  • Ipod nano 6th gen and bluetooth

    How do I connect my ipod nano 6th generation to a blutooth adapter so I can use wireless headphones?

  • Import and export module pool

    Hi all, I need to import the module pool or dialogprogram and then export it to another . say from sand box to dev . I cannot do it through transports . I need to transfer everything including the screens. Any help would be greatly appreciated. Thank