Error open Fiori UI Theme Designer on https

Dear all,
We're able to execute Fiori transaction apps on http and https.
Fiori launchpad also work on http and https.
Fiori UI Theme Designer also work perfectly on http ...
But if we open on https, we found 500 Internal Server Error after input user ID and Password ...
https://xxxxxxxxxx/sap/bc/theming/theme-designer?sap-client=080&sap-language=EN
I tried to search on forum and found some of help i.e :
Error in opening Fiori UI5 Theme designer
SAP Fiori LL07 - Common mistake for launchpage setting
Masa mention that Theme Designer and Apps should be on same protocol.
But how to switch from http to https?
We've done all step in Prerequisites - User Interface Add-On for SAP NetWeaver - SAP Library
Below component in SAP NW Gateway :
SAP_BASIS    740    0005    SAPKB74005
SAP_ABA    740    0005    SAPKA74005
SAP_GWFND    740    0007    SAPK-74007INSAPGWFND
SAP_UI    740    0008    SAPK-74008INSAPUI
PI_BASIS    740    0005    SAPK-74005INPIBASIS
ST-PI    2008_1_710    0007    SAPKITLRE7
SAP_BW    740    0005    SAPKW74005
IW_PGW    100    0005    SAPK-10005INIWPGW
UIX01CA1    100    0002    SAPK-10002INUIX01CA1
UIX01EAP    100    0002    SAPK-10002INUIX01EAP
UIX01HCM    100    0002    SAPK-10002INUIX01HCM
UIX01TRV    100    0002    SAPK-10002INUIX01TRV
thx in advance.
Tags edited by: Michael Appleby

Hi Samuli Kaski,
All problem resolved now.
I just turn off http service via tcode SMICM (just leave only https service) and restart application.
Now I can create custom theme via UI Theme Designer using https protocol.
Thx for your attention before.
Regards,
Daniel K

Similar Messages

  • Mixed content error for FIORI launchpad designer

    Dear team,
    I have activated a ERP trial on AWS via CAL. Fiori launchpad and designer opens and works properly but when I am creating new tiles in a catalog, none of information on tile gets saved.
    I checked in Chrome console and following error is recorded when saving a tile:
    After allowing unsafe scripts, error changed to following:
    Any ideas?
    Best Regards - Anuraag

    Hi Anuraag,
    Please open the launchpad designer with http (not https). If you can not logon via http, change the protocol to  "Do not switch" in the SICF setting.
    Simple steps to configure Fiori Login\Logoff Page
    SAP Fiori - SAP Fiori launchpad troubleshooting
    Regards,
    Masa / SAP P&I Technology RIG

  • Reg. Bex Error while opening query in query designer!!!!!

    Hi Guys!!
    Can any one help me in getting out of this issue.
    I am getting BEx Error while opening query in query designer as below.
    3:45:00 PM.400: Info: Query Designer Start. Revision: 500
    3:45:06 PM.728: DEBUG ASSERT ### False - QDbCommandManager::.ctor - Method not called from CommandManager
    -CALLING-FROM- 3:45:06 PM.728: DEBUG ASSERT ### False - QDbCommandManager::.ctor - Method not called from CommandManager ---
       at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
       at com.sap.bi.et.common.appl.Log.Debug.Assert(Boolean iExpectedCondition, String iAdditionalInformation, String iDetailedMessage)
       at com.sap.bi.et.QueryDesigner.QDfForm.InitFromCommandManager(QDbCommandManager iCommandManager)
       at com.sap.bi.et.QueryDesigner.QDbCommandManager..ctor(QDbApplicationData iApplicationData, QDfForm iWindow)
       at com.sap.bi.et.QueryDesigner.QDbApplicationData.Init()
       at com.sap.bi.et.QueryDesigner.QDbApplicationData.Run(Boolean iAsApplication)
       at com.sap.bi.et.QueryDesigner.QDbQueryDesigner.Run(Boolean iAsApplication)
       at com.sap.bi.et.QueryDesigner.QDStarter.QDStartup.Main()
    3:45:07 PM.337: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager
    -CALLING-FROM- 3:45:07 PM.337: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager ---
       at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
       at com.sap.bi.et.common.appl.Log.Debug.Assert(Boolean iExpectedCondition, String iAdditionalInformation, String iDetailedMessage)
       at com.sap.bi.et.QueryDesigner.QDbCommandBase.Execute()
       at com.sap.bi.et.QueryDesigner.QDbCommandManager.DoViewCommand(QDeAreaType iAreaType, QDeViewOpenMode iOpenMode)
       at com.sap.bi.et.QueryDesigner.QDbApplicationData.OutputInvoke()
       at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
       at System.Delegate.DynamicInvokeImpl(Object[] args)
       at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme)
       at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj)
       at System.Threading.ExecutionContext.runTryCode(Object userData)
       at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
       at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme)
       at System.Windows.Forms.Control.InvokeMarshaledCallbacks()
       at System.Windows.Forms.Control.WndProc(Message& m)
       at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
       at System.Windows.Forms.ContainerControl.WndProc(Message& m)
       at System.Windows.Forms.Form.WndProc(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.CommandBarController.AppMainFormWnd.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.XPMenus.MenuActivationControl.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.XPMenus.FormNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
       at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
       at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
       at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
       at System.Windows.Forms.Application.Run(Form mainForm)
       at com.sap.bi.et.QueryDesigner.QDbApplicationData.Run(Boolean iAsApplication)
       at com.sap.bi.et.QueryDesigner.QDbQueryDesigner.Run(Boolean iAsApplication)
       at com.sap.bi.et.QueryDesigner.QDStarter.QDStartup.Main()
    QDbCommandManager::DoViewCommand  - Table View
    3:45:07 PM.368: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager
    -CALLING-FROM- 3:45:07 PM.368: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager ---
       at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
       at com.sap.bi.et.common.appl.Log.Debug.Assert(Boolean iExpectedCondition, String iAdditionalInformation, String iDetailedMessage)
       at com.sap.bi.et.QueryDesigner.QDbCommandBase.Execute()
       at com.sap.bi.et.QueryDesigner.QDbCommandManager.DoViewCommand(QDeAreaType iAreaType, QDeViewOpenMode iOpenMode)
       at com.sap.bi.et.QueryDesigner.QDbApplicationData.OutputInvoke()
       at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
       at System.Delegate.DynamicInvokeImpl(Object[] args)
       at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme)
       at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj)
       at System.Threading.ExecutionContext.runTryCode(Object userData)
       at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
       at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme)
       at System.Windows.Forms.Control.InvokeMarshaledCallbacks()
       at System.Windows.Forms.Control.WndProc(Message& m)
       at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
       at System.Windows.Forms.ContainerControl.WndProc(Message& m)
       at System.Windows.Forms.Form.WndProc(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.CommandBarController.AppMainFormWnd.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.XPMenus.MenuActivationControl.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.XPMenus.FormNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
       at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
       at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
       at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
       at System.Windows.Forms.Application.Run(Form mainForm)
       at com.sap.bi.et.QueryDesigner.QDbApplicationData.Run(Boolean iAsApplication)
       at com.sap.bi.et.QueryDesigner.QDbQueryDesigner.Run(Boolean iAsApplication)
       at com.sap.bi.et.QueryDesigner.QDStarter.QDStartup.Main()
    QDbCommandManager::DoViewCommand  - Rows/Columns
    3:45:07 PM.431: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager
    -CALLING-FROM- 3:45:07 PM.431: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager ---
       at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
       at com.sap.bi.et.common.appl.Log.Debug.Assert(Boolean iExpectedCondition, String iAdditionalInformation, String iDetailedMessage)
       at com.sap.bi.et.QueryDesigner.QDbCommandBase.Execute()
       at com.sap.bi.et.QueryDesigner.QDbCommandManager.DoViewCommand(QDeAreaType iAreaType, QDeViewOpenMode iOpenMode)
       at com.sap.bi.et.QueryDesigner.QDbApplicationData.OutputInvoke()
       at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
       at System.Delegate.DynamicInvokeImpl(Object[] args)
       at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme)
       at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj)
       at System.Threading.ExecutionContext.runTryCode(Object userData)
       at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
       at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme)
       at System.Windows.Forms.Control.InvokeMarshaledCallbacks()
       at System.Windows.Forms.Control.WndProc(Message& m)
       at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
       at System.Windows.Forms.ContainerControl.WndProc(Message& m)
       at System.Windows.Forms.Form.WndProc(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.CommandBarController.AppMainFormWnd.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.XPMenus.MenuActivationControl.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.XPMenus.FormNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
       at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
       at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
       at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
       at System.Windows.Forms.Application.Run(Form mainForm)
       at com.sap.bi.et.QueryDesigner.QDbApplicationData.Run(Boolean iAsApplication)
       at com.sap.bi.et.QueryDesigner.QDbQueryDesigner.Run(Boolean iAsApplication)
       at com.sap.bi.et.QueryDesigner.QDStarter.QDStartup.Main()
    QDbCommandManager::DoViewCommand  - Cells
    3:45:07 PM.446: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager
    -CALLING-FROM- 3:45:07 PM.446: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager ---
       at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
       at com.sap.bi.et.common.appl.Log.Debug.Assert(Boolean iExpectedCondition, String iAdditionalInformation, String iDetailedMessage)
       at com.sap.bi.et.QueryDesigner.QDbCommandBase.Execute()
       at com.sap.bi.et.QueryDesigner.QDbCommandManager.DoViewCommand(QDeAreaType iAreaType, QDeViewOpenMode iOpenMode)
       at com.sap.bi.et.QueryDesigner.QDbApplicationData.OutputInvoke()
       at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
       at System.Delegate.DynamicInvokeImpl(Object[] args)
       at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme)
       at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj)
       at System.Threading.ExecutionContext.runTryCode(Object userData)
       at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
       at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme)
       at System.Windows.Forms.Control.InvokeMarshaledCallbacks()
       at System.Windows.Forms.Control.WndProc(Message& m)
       at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
       at System.Windows.Forms.ContainerControl.WndProc(Message& m)
       at System.Windows.Forms.Form.WndProc(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.CommandBarController.AppMainFormWnd.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.XPMenus.MenuActivationControl.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.XPMenus.FormNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
       at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
       at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
       at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
       at System.Windows.Forms.Application.Run(Form mainForm)
       at com.sap.bi.et.QueryDesigner.QDbApplicationData.Run(Boolean iAsApplication)
       at com.sap.bi.et.QueryDesigner.QDbQueryDesigner.Run(Boolean iAsApplication)
       at com.sap.bi.et.QueryDesigner.QDStarter.QDStartup.Main()
    QDbCommandManager::DoViewCommand  - Conditions
    3:45:07 PM.446: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager
    -CALLING-FROM- 3:45:07 PM.446: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager ---
       at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
       at com.sap.bi.et.common.appl.Log.Debug.Assert(Boolean iExpectedCondition, String iAdditionalInformation, String iDetailedMessage)
       at com.sap.bi.et.QueryDesigner.QDbCommandBase.Execute()
       at com.sap.bi.et.QueryDesigner.QDbCommandManager.DoViewCommand(QDeAreaType iAreaType, QDeViewOpenMode iOpenMode)
       at com.sap.bi.et.QueryDesigner.QDbApplicationData.OutputInvoke()
       at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
       at System.Delegate.DynamicInvokeImpl(Object[] args)
       at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme)
       at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj)
       at System.Threading.ExecutionContext.runTryCode(Object userData)
       at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
       at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme)
       at System.Windows.Forms.Control.InvokeMarshaledCallbacks()
       at System.Windows.Forms.Control.WndProc(Message& m)
       at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
       at System.Windows.Forms.ContainerControl.WndProc(Message& m)
       at System.Windows.Forms.Form.WndProc(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.CommandBarController.AppMainFormWnd.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.XPMenus.MenuActivationControl.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.XPMenus.FormNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
       at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
       at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
       at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
       at System.Windows.Forms.Application.Run(Form mainForm)
       at com.sap.bi.et.QueryDesigner.QDbApplicationData.Run(Boolean iAsApplication)
       at com.sap.bi.et.QueryDesigner.QDbQueryDesigner.Run(Boolean iAsApplication)
       at com.sap.bi.et.QueryDesigner.QDStarter.QDStartup.Main()
    QDbCommandManager::DoViewCommand  - Exceptions
    3:45:07 PM.446: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager
    -CALLING-FROM- 3:45:07 PM.446: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager ---
       at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
       at com.sap.bi.et.common.appl.Log.Debug.Assert(Boolean iExpectedCondition, String iAdditionalInformation, String iDetailedMessage)
       at com.sap.bi.et.QueryDesigner.QDbCommandBase.Execute()
       at com.sap.bi.et.QueryDesigner.QDbCommandManager.DoViewCommand(QDeAreaType iAreaType, QDeViewOpenMode iOpenMode)
       at com.sap.bi.et.QueryDesigner.QDbApplicationData.OutputInvoke()
       at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
       at System.Delegate.DynamicInvokeImpl(Object[] args)
       at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme)
       at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj)
       at System.Threading.ExecutionContext.runTryCode(Object userData)
       at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
       at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme)
       at System.Windows.Forms.Control.InvokeMarshaledCallbacks()
       at System.Windows.Forms.Control.WndProc(Message& m)
       at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
       at System.Windows.Forms.ContainerControl.WndProc(Message& m)
       at System.Windows.Forms.Form.WndProc(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.CommandBarController.AppMainFormWnd.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.XPMenus.MenuActivationControl.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.XPMenus.FormNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
       at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
       at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
       at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
       at System.Windows.Forms.Application.Run(Form mainForm)
       at com.sap.bi.et.QueryDesigner.QDbApplicationData.Run(Boolean iAsApplication)
       at com.sap.bi.et.QueryDesigner.QDbQueryDesigner.Run(Boolean iAsApplication)
       at com.sap.bi.et.QueryDesigner.QDStarter.QDStartup.Main()
    QDbCommandManager::DoViewCommand  - InfoProvider
    3:45:07 PM.446: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager
    -CALLING-FROM- 3:45:07 PM.446: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager ---
       at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
       at com.sap.bi.et.common.appl.Log.Debug.Assert(Boolean iExpectedCondition, String iAdditionalInformation, String iDetailedMessage)
       at com.sap.bi.et.QueryDesigner.QDbCommandBase.Execute()
       at com.sap.bi.et.QueryDesigner.QDbCommandManager.DoViewCommand(QDeAreaType iAreaType, QDeViewOpenMode iOpenMode)
       at com.sap.bi.et.QueryDesigner.QDbApplicationData.OutputInvoke()
       at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
       at System.Delegate.DynamicInvokeImpl(Object[] args)
       at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme)
       at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj)
       at System.Threading.ExecutionContext.runTryCode(Object userData)
       at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
       at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme)
       at System.Windows.Forms.Control.InvokeMarshaledCallbacks()
       at System.Windows.Forms.Control.WndProc(Message& m)
       at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
       at System.Windows.Forms.ContainerControl.WndProc(Message& m)
       at System.Windows.Forms.Form.WndProc(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.CommandBarController.AppMainFormWnd.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.XPMenus.MenuActivationControl.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.XPMenus.FormNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
       at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
       at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
       at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
       at System.Windows.Forms.Application.Run(Form mainForm)
       at com.sap.bi.et.QueryDesigner.QDbApplicationData.Run(Boolean iAsApplication)
       at com.sap.bi.et.QueryDesigner.QDbQueryDesigner.Run(Boolean iAsApplication)
       at com.sap.bi.et.QueryDesigner.QDStarter.QDStartup.Main()
    QDbCommandManager::DoViewCommand  - Filter
    QDbCommandManager::CommandExecute  - Properties
    QDbCommandManager::DoViewCommand  - Properties
    QDdEventDispatcher::MenuItemClickedHandler - Bar clicked: OpenQuery
    QDbCommandManager::CommandExecute  - Open...
    OSDialogForm caught Exception: GetNodes: RFC Exception
    -EXCEPTION-START- 3:45:19 PM.24: TRACE EXCEPTION  ---
    Exception Name: ObjectDisposedException
    Exception Message: Cannot access a disposed object.
    Object name: 'OSDialogForm'.
    Exception    at System.Windows.Forms.Control.MarshaledInvoke(Control caller, Delegate method, Object[] args, Boolean synchronous)
       at System.Windows.Forms.Control.Invoke(Delegate method, Object[] args)
       at System.Windows.Forms.Control.Invoke(Delegate method)
       at com.sap.bi.et.BExOpenSaveServices.OSDialogForm.mController_CurrentFolderNodesUpdated(Object sender)
       at com.sap.bi.et.BExOpenSaveServices.OSDlgController.EndReadFolderNodes(OSFolderInfo piFolderInfo)
       at com.sap.bi.et.BExOpenSaveServices.OSDlgController.OSRequestFolderNodes.Callback(IAsyncResult ar)
       at System.Runtime.Remoting.Messaging.AsyncResult.SyncProcessMessage(IMessage msg)
       at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
       at System.Runtime.Remoting.Proxies.AgileAsyncWorkerItem.ThreadPoolCallBack(Object o)
       at System.Threading._ThreadPoolWaitCallback.WaitCallback_Context(Object state)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)
    Full Stack:   at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
       at com.sap.bi.et.common.appl.Log.Trace.Exception(Exception ex, String iAdditionalInformation)
       at com.sap.bi.et.QueryDesigner.QDbApplicationData.AppDomainUnhandledException(Object iSender, UnhandledExceptionEventArgs iEventArgs)
       at System.Windows.Forms.Control.MarshaledInvoke(Control caller, Delegate method, Object[] args, Boolean synchronous)
       at System.Windows.Forms.Control.Invoke(Delegate method, Object[] args)
       at System.Windows.Forms.Control.Invoke(Delegate method)
       at com.sap.bi.et.BExOpenSaveServices.OSDialogForm.mController_CurrentFolderNodesUpdated(Object sender)
       at com.sap.bi.et.BExOpenSaveServices.OSDlgController.EndReadFolderNodes(OSFolderInfo piFolderInfo)
       at com.sap.bi.et.BExOpenSaveServices.OSDlgController.OSRequestFolderNodes.Callback(IAsyncResult ar)
       at System.Runtime.Remoting.Messaging.AsyncResult.SyncProcessMessage(IMessage msg)
       at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
       at System.Runtime.Remoting.Proxies.AgileAsyncWorkerItem.ThreadPoolCallBack(Object o)
       at System.Threading._ThreadPoolWaitCallback.WaitCallback_Context(Object state)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)
    -EXCEPTION-END----
    -CALLING-FROM- 3:45:19 PM.24: TRACE EXCEPTION  ---
       at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
       at com.sap.bi.et.common.appl.Log.Trace.Exception(Exception ex, String iAdditionalInformation)
       at com.sap.bi.et.QueryDesigner.QDbApplicationData.AppDomainUnhandledException(Object iSender, UnhandledExceptionEventArgs iEventArgs)
       at System.Windows.Forms.Control.MarshaledInvoke(Control caller, Delegate method, Object[] args, Boolean synchronous)
       at System.Windows.Forms.Control.Invoke(Delegate method, Object[] args)
       at System.Windows.Forms.Control.Invoke(Delegate method)
       at com.sap.bi.et.BExOpenSaveServices.OSDialogForm.mController_CurrentFolderNodesUpdated(Object sender)
       at com.sap.bi.et.BExOpenSaveServices.OSDlgController.EndReadFolderNodes(OSFolderInfo piFolderInfo)
       at com.sap.bi.et.BExOpenSaveServices.OSDlgController.OSRequestFolderNodes.Callback(IAsyncResult ar)
       at System.Runtime.Remoting.Messaging.AsyncResult.SyncProcessMessage(IMessage msg)
       at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
       at System.Runtime.Remoting.Proxies.AgileAsyncWorkerItem.ThreadPoolCallBack(Object o)
       at System.Threading._ThreadPoolWaitCallback.WaitCallback_Context(Object state)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)
    Thanks in advance
    Peter

    Hi
    If I got your question properly, you have SAP GUI Installation issues , Try to install relevant Excel version too.
    http://help.sap.com/saphelp_nw70/helpdata/en/9c/03a042b443c56ae10000000a155106/frameset.htm
    BASIS Team can help you in this.
    Hope it helps

  • I have three aperture libraries. But just recently two of them (old from 2011) will not open. I get the following error: There was an error opening the database for the library "~/Pictures/Family IIi.aplibrary". Please help, thanks

    I have three aperture libraries. But just recently two of them (old from 2011) will not open. I get the following error: There was an error opening the database for the library “~/Pictures/Family IIi.aplibrary”. Please help, thanks

    Are all three libraries under your account or are they in different accounts? Any other errros on the system?
    Start by doing the permission repair and library repair steps in Aperture 3: Troubleshooting Basics

  • Trouble opening pdf's - I have received several pdf's from a friend via e-mail (Thunderbird). Some of them open just fine but others give me the message: "There was an error opening this document. The file is damaged and could not be repaired."

    Trouble opening pdf's - I have received several pdf's from a friend via e-mail (Thunderbird). Some of them open just fine but others give me the message: "There was an error opening this document. The file is damaged and could not be repaired." My friend made sure that the files in question opened without issue on his computer (a PC). Further, I was able to open one of these "damaged" files on my Android phone, but I cannot open them on the Macbook Air. Any help would be greatly appreciated.

    Back up all data.
    Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
    /Library/Internet Plug-ins
    In the Finder, select
    Go ▹ Go to Folder
    from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
    From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
    The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
    If you still have the issue, repeat with this line:
    ~/Library/Internet Plug-ins
    If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

  • Fiori Theme Designer: Target Content not saved

    Hello,
    I have created a theme based on the blue crystal theme. At first I entered the link to the application (URL to launchpad) and add the name of the application (eg "Launchpad").
    Now I press the "Add" button and a new entry is created as shown in the following screenshot:
    Next I do some customization and save + build my changes. If I now access my launchpad, the changes were applied.
    When I close the browser with the theme designer or just go back to the theme overview and load again my custom theme, the previously added target application ("Launchpad") is not more there (if I again add the link to my launchpad and give a name I can see, that all adaptions are loaded correctly in the preview mode, so in genereal, the changes are stored correctly, but my application target "Launchpad" not.)
    Is there a way to restore the prev. set target?
    Thanks and best regards,
    Patrick

    Hi Patrick,
    It has been a few months since I worked with Theme Designer, but the application targets never were saved, nor do I think they are meant to be saved.  Since I suspect themes to be only infrequently modified for a specific application, I don't see much of a rationale for saving those links.
    Regards, Mike
    SAP Customer Experience Group - CEG

  • Error - SAP Fiori (CRM standard application)

    Hi Experts,
    We are implementing standard CRM Fiori application – My Opportunities. No customization has been done to this app.
    Error is appearing while trying to open “Account” popup window. Error message is as below.
    {"error":{"code":"005056A509B11ED1B9BF9F46AA8E82ED","message":{"lang":"en","value":"In the context of Data Services an unknown internal server error occured"},"innererror":{"transactionid":"56E6CDE42550F16B8C7790B11C17C9CA","timestamp":"20150319031631.3160000","Error_Resolution":{"SAP_Transaction":"Run transaction /IWFND/ERROR_LOG on SAP NW Gateway hub system and search for entries with the timestamp above for more details","SAP_Note":"See SAP Note 1797736 for error analysis (https://service.sap.com/sap/support/notes/1797736)"}}}}
    Log file description in Tcode : /IWFND/ERROR_LOG - Dereferencing the NULL reference.
    System details:
    SAP Netweaver 7.4 SP 06.
    SAP CRM 7.0 EHP 3
    SAPUI5 library - 1.26.8
    UIX02CRM 100 – SP03
    Please suggest how to resolve this error. We have implemented below SAP notes.
    1979694
    Fiori App: Enhance Log Display of Changes in My Opportunitie
    1996733
    Multiple transaction types in My Notes App - DDIC Object
    1996734
    Multiple Transactions in My Notes App - SNOTE changes
    1997578
    Employee Responsible Blanking out - LEAD
    1997580
    Employee Responsible Blanking out - Opportunity
    1998138
    Accept/Reject Lead- Employee Responsible check
    1999951
    Accept/Reject Lead- Employee Responsible check- DDIC
    2014206
    Change pointers for marketing attributes in CRM
    2015743
    CRM Fiori: My Opportunites / My Leads - Set the maximum hit
    2048330
    Fiori Opportunity Search: Filtering by Opportunity ID issue
    2103131
    SAPUI5 Fixes for update via SMP
    2107709
    Corrections for Fiori App: My Opportunities
    2108617
    Hotfix 1.26.3 for UI AddOn SP11 SC:UI2_SRVC
    2111116
    Enable own support-message-system for Fiori Embedded Support
    2111618
    Sorting order of role menu entries for folders /reference us
    2115450
    Fix: Remove AUTH_DEFAULT in SAP Fiori content checker
    2119477
    UI theme designer for ABAP: Version 1.8.1
    2119807
    Fiori: Filter with Date attribute is not working as expected
    2119878
    Creation of server relative URL for non-Fiori business apps
    2123909
    Fiori Launchpad Designer - SP11 functional corrections
    2126801
    SAPUI5 Repository Load / Http: .Ui5RepositoryIgnore and othe
    2128620
    Image upload corrections in Suite Page Builder Application
    2128676
    SAPUI5 upgrade to version 1.26.8
    2135804
    SAPUI5 patch via SMP - better error handling
    2137006
    Suite Page Builder - Corrections for the disable personalization.
      Thanks & Regards,
    Jyoti Prakash Das

    Hi Masa,
    The CRM version in our landscape is : CRM 7.0 EHP3
    But we have installed below versions in Fiori.
    UIX02CRM (release 100) SP3.
    GBX02CRM SP3
    Please suggest whether we need to uninstall them and install new versions(CRM001-CRM 7.0 EhP3 SPS07).
    Also system does not allow to uninstall existing components. Please advice on this.
    Thanks,
    Jyoti Prakash Das

  • Error opening PDF files on anonymous SharePoint 2013SP1 site with IE

    Clicking search results, in the strict sense pdf files, using IE on an anonymous SharePint 2013SP1 site, I received the error:
    There was an error opening this document. The filename, directory name, or volume label syntax is incorrect.
    I would like to solve this problem on the server side.
    Starting position:
    - SharePoint 2013 SP1
    - Web Application:
      - based on template 'Publishing Portal'
      - Anonymous Access enabled
      - Claims based authentication: Integrated Windows Authentication NTLM
      - Client Integration disabled
    - Site Collection:
      - Anonymous Access enabled for 'Entire Web site' => group 'Anonymous Users' was created
      - added permission to open items: $Web.AnonymousPermMask64 = "ViewListItems, ViewVersions, ViewFormPages, Open, ViewPages, UseClientIntegration, OpenItems"
      - SC-Feature 'Limited-access user permission lockdown mode' disabled
    Client side solutions:
    c1) Open Link with “Open in new tab” or “Open in new window” => OK
    c2) Disable IE Add-on “Adobe Acrobat Sharepoint OpenDocuments Component” => OK
    c3) Set bDisableSharePointFeatures to 1 in regetit => OK
    Server side solutions:
    S1) Turn off Client Integration => didn't work, still same error
    S2) Modify DOCICON.XML => didn't work, still same error
    I gave these two options a chance:
    first: <Mapping Key="pdf" Value="icpdf.png" OpenControl="SharePoint.OpenDocuments"/>
    then: <Mapping Key="pdf" Value="icpdf.png" OpenControl="AdobeAcrobat.OpenDocuments"/>
    I modified DOCICON.XML on both hives 14 and 15.
    Remarks:
    - After changingparameters I allways did an IISreset.
    - As far as I understood I can only change bDisableSharePointFeatures on Client Side.
    Any help, suggestion, idea wellcome!
    Thanks!

    Hi Harry,
    From your description, I understand you encountered the issue when open PDF documents from search result page.
    Here is a similar thread, please try the piece of code in the page layout for the search results page from Mitch B_83:
    https://social.technet.microsoft.com/Forums/appvirtualization/en-US/545efcc6-b748-4df8-aee0-7f57f778ad1e/sharepoint-2010-opening-pdfs-in-search-results-the-filename-directory-name-or-volume-label?forum=sharepointgeneralprevious
    You could refer to this for search result page layout: Site settings > Web Designer Galleries > Master pages and page layouts > SearchResults.apsx .
    Regards,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected] .
    Rebecca Tu
    TechNet Community Support

  • Error opening XDP file from Internet Explorer

    Problem: We currently can view pay check online. But users always have problem printing online pay check. So we decided that we will convert online web pay check to PDF so that users can easily print it.<br /><br />We are on Peoplesoft.<br /> - I have created a PDF form using Adobe LiveCycle Designer 7.0 (which looks exactly like paycheck)<br /> - This form is stored on web server(IIS).<br /> - Written code (PeopleCode) which will take data from online pay check page and populate the blank PDF form stored on server.<br /> - Used ContentType("application/vnd.adobe.xdp+xml") to display PDF in browser.<br /><br />The code that can be seen on browser when %Response.SetContentType("text/plain") is used. <br /><br />---------------------------------------------------------------------<br /><?xml version="1.0" encoding="UTF-8"?> <br /><?xfa generator="XFA2_0" APIVersion="2.2.4333.0"?> <br /><xdp:xdp xmlns:xdp="http://ns.adobe.com/xdp/"> <br /><xfa:datasets xmlns:xfa="http://www.xfa.org/schema/xfa-data/1.0/"> <br /><xfa:data> <br /><form1> <br />  <netpay>99</netpay> <br />  <paybegindt>03/28/2006</paybegindt> <br />  <payenddt>03/29/2006</payenddt> <br />  <checkdt>03/30/2006</checkdt> <br />  <name>Kashyap,Nitin</name>      <br />  <eeid>12345678</eeid>       <br /></form1>  <br /></xfa:data> <br /></xfa:datasets>  <br /><pdf href="http://server.na.com/wwhrxa/final.pdf" xmlns="http://ns.adobe.com/xdp/pdf/"/>  <br /></xdp:xdp><br />---------------------------------------------------------------------<br /><br />It worked fine first time GREAT!!!. After that I keep getting this error message.<br /><br />ERROR MESSAGE<br />There was an error opening this document. This file is already open or in use by another application.<br /><br />The browser I am using is Internet Exlorer (Ver 6.0). I tried deleting cashe and re-booting with no use. Adobe reader version is 7.07. I also tried on couple of other PCs, but got same error.<br /><br />Any suggestions or hints would be of great help. I can also be reached at [email protected]<br /><br />Thanks!<br />Nitin

    Still working to get this issue resolved. Any pointers would be of great help. Thanks...

  • "There was an error opening the database for the library "~/Pictures/Apert"

    Hey everyone,
    There's already another discussion thread about this at the link below, but the problem was never actually resolved. http://discussions.apple.com/thread.jspa?threadID=2343014&tstart=0&messageID=116 67261#11667261
    So I stumbled across this problem where Aperture 3 will display the following error when opening the image library.
    There was an error opening the database for the library “~[path]/Aperture Library.aplibrary”.
    One user suggested navigating to the actual library, and ⌘⌥-clicking the library to open it with the Aperture Library First Aid dialog. This however, did not work for me. I still received the error messages upon ⌘⌥-clicking the library.
    Here's a little hack I discovered for those of you still struggling. It doesn't fix the problem (leaves quite a large dent remaining actually), but hopefully someone can cultivate what little I discovered.
    ⌥-click Aperture (not the library)
    You should get to the library selection dialog box. Create a new library (bottom right corner) and remember the location of the new library. Put a few random pictures in the new one.
    Close Aperture
    ⌃-click both the old and new libraries and "Show Package Contents."
    Open the folder "Database" in both libraries.
    Cross check the folders to see if the old library is missing files that are in the new library. If your old library is missing some files (mine was), drag the missing files from the new library to the old one.
    Close both folders.
    ⌘⌥-click the old library.
    NOW, I got the Aperture Library First Aid dialog.
    Rebuild the library (3rd option)
    Wait a while.
    Aperture should open up with a folder named "Recovered Folder." Within this folder will be a SINGLE project named "Recovered Project" with ALL the images from your old library. There may be a few albums there too, but mine were all empty so it didn't matter in my case. To my knowledge, I lost all the adjustments I performed too.
    This is as far as I got. I have much of my library backed up, so I only needed to copy the most recent photos into the backup. I am NOT reorganizing and re-editing pictures in this one!
    As Aperture is a photo-organizing and photo-editing software, I understand that this by no means fixes the problem, since you lose all organization and editing. But it enables one to at least view the images lost. Hopefully a more knowledgable hacker else can figure out how to fix this completely. Unfortunately, I simply don't have the time to continue messing with this.
    Good luck to anyone else having issues! I understand the frustration you must be facing, its freaky having years worth of images simply disappear! After this incident, I'm definitely going to configure Time Machine to perform more frequent backups, since my latest backup was already a couple weeks old.

    Hey All,
    To my horror I have a similar problem and your solution didn't seem to help. To be specific, I get the error:
    "There was an error opening the database for the library “~/Pictures/Aperture Library_2.aplibrary" Everytime I try to run Aperture. This happened because my Apple computer shut off completely (due to bad battery) while importing photos from a memory card.
    I've tried "option + command" while clicking the aperture application and that gave me the same error message without any other option except to quit the program. I tried "option + command" and clicked the library package but that didn't work either. I tried creating a new aperture library, opening it which I did successfully, and then switching to my main one but that didn't work.
    Does anyone know away to get it to work again and have the edits still there?
    I'm a professional photographer and have thousands of photos or so in the library so this is distressing. The master files for the photos are located on an external hard drive, but I'm not sure how to access them in aperture. Are all the edits on the photographs are in the external hard drive or the aperture library. Is there any other way to resolve this issue without losing the edits?
    Does apple have a support number I can call? Any help would be greatly appreciated!!

  • "There was an error opening this document. The filename, directory name, or volume label syntax is i

    "There was an error opening this document. The filename, directory name, or volume label syntax is incorrect."
    I tried different versions, no avail.
    I think it has to do with the password somehow, but I do not know. I can copy the files from the web folder to my desktop and they open fine (after entering the password AGAIN), but I can not open them directly form the web folder - it does not ask for the password again, just pops up the error.
    Adobe's support really upset me (insert explicative here) by keeping me on the phone for 20 min, collecting all sorts of information about me (not the problem) with some lady who barely spoke English, just to tell me to go to the website. No surprise they need to charge for tech support, customer service is doing everything but "service". I hate companies that do this. I am thinking of using another PDF reader, I have heard good things about them. Check
    http://en.wikipedia.org/wiki/List_of_PDF_software
    Has anyone ever been able to find a fix? I can not find anything on this site.

    Howdy, Moritz!
    Thanks for the suggestion, but this is not an issue of filename and language conflicts, at least in my environment. I highly doubt that's the root cause of this issue.
    The PDF files in my tests have all had very simple names, such as 123.pdf and test.pdf, as well as more complicated names with spaces in them. Nothing about the files contains anything outside of the English language, including the content and filenames.
    From everything I've been able to determine, this is a WebDAV-related security issue that affects programs like Acrobat Reader. I know for a fact that MS's KB892211 WebDAV patch doesn't create the issue, however MS's update to that 892211 patch DOES create the issue. As I've outlined earlier in this thread, my extensive testing has proven this more than once.
    At this point, I haven't been able to accurately uninstall the update to 892211 after the update has been installed. And, as far as I can tell, the update to 892211 comes down from MS as a Office and/or Windows Update component. So, everyone has it, the uninstaller doesn't work, and there's no documentation detailing what registry entries are being changed when the update to 892211 is installed.
    My ultimate goal is to bring a test machine to the point just before the update to 892211 goes on, fire up the Registry, Process, and File monitors on my test box, and install the 892211 update. This should give me an accurate picture of what I need to restore in order to rid the machine of the update to 892211.
    Until Microsoft officially fixes the issue, I am not totally sure how this will be resolved. I've ceased my work on the issue for now since copying the PDF file from the WebDAV share to the user's desktop gets the user what they wanted in the first place - the ability to open the PDF file!
    Maybe, once some other projects slow down a bit, I might get back to creating a solution, but it's going to be a "hack" no matter which way you slice it. I'd much rather MS spend their time creating the solution. If I have to do it, my fee to MS will be quite HIGH! :*)
    George B.

  • Can't open a pdf file: there was an error opening this document access denied

    Could anyone help in this problem I am facing. I have scanned documents as PDF and they opened nicely but after I renamed the files I am not able to open them. I get the message 'There was an error opening this document. Access denied'. When I try to copy/paste the document I also get the message 'cannot copy accounting 3: access is denied. Make sure the disk is not full or write-protected and the file is not currently in use'. I resterated Windows but still get same message although new files I scan open nicely even if I rename and/or copy/paste. Thank you

    Announcement: Would you like to help us improve Adobe Reader?
    Hi All,
    We have had a few bug reports related to Adobe Reader X protected mode coming in from you in this forum. We have addressed a large number of them in our upcoming Reader update and we would like to hear your feedback.
    To that extent, we would like to invite you to the Adobe Reader Prerelease program and try out the latest build. To participate, please fill in the form available at https://www.adobe.com/cfusion/mmform/index.cfm?name=reader_prerelease_ interest and indicate Adobe Reader as the product of your interest.
    We look forward to your active participation, feedback and help towards making Reader a better product.
    Thanks and regards,
    Adobe Prerelease Team

  • Unable to open jsp file in Design mode

    Hi,
    I am unable to open jsp files in design mode, I am using eclipse Version: 3.6.1.
    Please help.
    Regards,
    Ale Hasan

    Hi Ale,
    Thank you for the additional information. Unfortunately, there does not seem to be anything unusual about your project based on your description. I'm surprised you don't see any processes listed in the process view while waiting for the page to open. I thought you might see something related to a queue manager job to "Manage Resource Event Jobs".
    Are there any messages in the error.log? You can open a view to the error log from the menu option, "Window -> Show View -> Error Log". I'm curious if there are any messages about a process timing out, unable to reset some object within a certain time, or any exceptions logged.
    If you change to another workspace with just a single JSF web project containing a smaller number of JSP, do you experience the same behavior?
    Can you also try using a more recent release of OEPE to see if that helps? The 11.1.1.6.1 release is about a year old.
    http://www.oracle.com/technetwork/developer-tools/eclipse/downloads/index.html
    Kind regards,
    Carlin

  • Cisco AIR-CAP26021-A-K9 || Error opening tftp:// ... /ap3g2-k9w7-tar.default

    Hi everyone:
    I have a problem with two Cisco AIR AP's ... I have configured already eight of them (in lightweight mode), but those two send me the next error, right now.
    ap: %Error opening tftp://255.255.255.255/ap3g2-k9w7-tar.default (connection timed out)
    And when I boot to the AP, it says:
    %Error opening flash
    IOS Bootloader - Starting system.
    flash is writable
    FLASH CHIP:  Numonyx Mirrorbit (0089)
    Xmodem file system is available.
    flashfs[0]: 11 files, 2 directories
    flashfs[0]: 0 orphaned files, 0 orphaned directories
    flashfs[0]: Total bytes: 31997952
    flashfs[0]: Bytes used: 7245824
    flashfs[0]: Bytes available: 24752128
    flashfs[0]: flashfs fsck took 15 seconds.
    Reading cookie from SEEPROM
    Base Ethernet MAC address: c0:67:af:6f:31:25
    Ethernet speed is 100 Mb - FULL Duplex
    button is pressed, wait for button to be released...
    button pressed for 21 seconds
    process_config_recovery: set IP address and config to default 10.0.0.1
    process_config_recovery: image recovery
    image_recovery: Download default IOS tar image tftp://255.255.255.255/ap3g2-k9w7-tar.default
    examining image...
    DPAA Set for Independent Mode
    DPAA_INIT = 0x0
    %Error opening tftp://255.255.255.255/ap3g2-k9w7-tar.default (connection timed out)ap:
    ap:
    ap:
    IOS Bootloader - Starting system.
    flash is writable
    FLASH CHIP:  Numonyx Mirrorbit (0089)
    Xmodem file system is available.
    flashfs[0]: 10 files, 2 directories
    flashfs[0]: 0 orphaned files, 0 orphaned directories
    flashfs[0]: Total bytes: 31997952
    flashfs[0]: Bytes used: 7245824
    flashfs[0]: Bytes available: 24752128
    flashfs[0]: flashfs fsck took 14 seconds.
    Reading cookie from SEEPROM
    Base Ethernet MAC address: c0:67:af:6f:31:25
    Ethernet speed is 100 Mb - FULL Duplex
    Loading "flash:/ap3g2-rcvk9w8-mx/ap3g2-rcvk9w8-mx"...###########################
    File "flash:/ap3g2-rcvk9w8-mx/ap3g2-rcvk9w8-mx" uncompressed and installed, entry point: 0x2003000
    executing...
    Secondary Bootloader - Starting system.
    Xmodem file system is available.
    flashfs[0]: 10 files, 2 directories
    flashfs[0]: 0 orphaned files, 0 orphaned directories
    flashfs[0]: Total bytes: 31997952
    flashfs[0]: Bytes used: 7245824
    flashfs[0]: Bytes available: 24752128
    flashfs[0]: flashfs fsck took 7 seconds.
    Base Ethernet MAC address: c0:67:af:6f:31:25
    Boot CMD: 'boot  flash:/ap3g2-rcvk9w8-mx/ap3g2-rcvk9w8-xx'
    Loading "flash:/ap3g2-rcvk9w8-mx/ap3g2-rcvk9w8-xx"...#####################
    File "flash:/ap3g2-rcvk9w8-mx/ap3g2-rcvk9w8-xx" uncompressed and installed, entry point: 0x2003000
    executing...
    Initializing flashfs...
    flashfs[2]: 10 files, 2 directories
    flashfs[2]: 0 orphaned files, 0 orphaned directories
    flashfs[2]: Total bytes: 31739904
    flashfs[2]: Bytes used: 7245824
    flashfs[2]: Bytes available: 24494080
    flashfs[2]: flashfs fsck took 8 seconds.
    flashfs[2]: Initialization complete.
    flashfs[3]: 0 files, 1 directories
    flashfs[3]: 0 orphaned files, 0 orphaned directories
    flashfs[3]: Total bytes: 11999232
    flashfs[3]: Bytes used: 1024
    flashfs[3]: Bytes available: 11998208
    flashfs[3]: flashfs fsck took 0 seconds.
    flashfs[3]: Initialization complete.
    Copying radio files from flash: to ram:
    %Error opening flash:/ap3g2-rcvk9w8-mx/E2.bin (No such file or directory)
    %Error opening flash:/ap3g2-rcvk9w8-mx/B2.bin (No such file or directory)
    %Error opening flash:/ap3g2-rcvk9w8-mx/V2.bin (No such file or directory)
    %Error opening flash:/ap3g2-rcvk9w8-mx/X2.bin (No such file or directory)
    %Error opening flash:/ap3g2-rcvk9w8-mx/Y2.bin (No such file or directory)
    Uncompressing radio files...
    File not found: flash:/ap3g2-rcvk9w8-mx/8004.img
    File not found: flash:/ap3g2-rcvk9w8-mx/E5.bin
    File not found: flash:/ap3g2-rcvk9w8-mx/B5.bin
    File not found: flash:/ap3g2-rcvk9w8-mx/V5.bin
    File not found: flash:/ap3g2-rcvk9w8-mx/X5.bin
    File not found: flash:/ap3g2-rcvk9w8-mx/Y5.bin
    ...done Initializing flashfs.
    Press RETURN to get started!
    *Mar  1 00:00:11.335: %LWAPP-3-CLIENTERRORLOG: Config load from flash failed. Initialising Cfg
    *Mar  1 00:00:13.071: %LINK-6-UPDOWN: Interface GigabitEthernet0, changed state to up
    *Mar  1 00:00:13.663: %SYS-5-RESTART: System restarted --
    Cisco IOS Software, C2600 Software (AP3G2-RCVK9W8-M), Version 15.2(4)JA1, RELEASE SOFTWARE (fc2)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2013 by Cisco Systems, Inc.
    Compiled Tue 30-Jul-13 23:08 by prod_rel_team
    *Mar  1 00:00:13.795: %LWAPP-3-CLIENTERRORLOG: Config load from flash failed. Initialising Cfg
    *Mar  1 00:00:13.795: %CAPWAP-3-ERRORLOG: Failed to load configuration from flash. Resetting to default config
    *Mar  1 00:00:13.799: %PARSER-4-BADCFG: Unexpected end of configuration file.
    lwapp_crypto_init: MIC Present and Parsed Successfully
    *Mar  1 00:00:14.751: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
    *Mar  1 00:00:16.467: DPAA Initialization Complete
    *Mar  1 00:00:16.467: %SYS-3-HARIKARI: Process DPAA INIT top-level routine exited
    *Mar  1 00:00:16.915: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to up
    no bridge-group 1 source-learning
                       ^
    % Invalid input detected at '^' marker.
    %Default route without gateway, if not a point-to-point interface, may impact performance
    *Mar  1 00:00:47.151: %CDP_PD-4-POWER_OK: All radios disabled - NEGOTIATED inline power source
    *Mar  1 00:00:49.515: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.1.44.221, mask 255.255.255.0, hostname APc067.af6f.3125
    Translating "CISCO-CAPWAP-CONTROLLER.asf.gob.mx"...domain server (10.1.1.2)
    *Mar  1 00:01:00.403: %CAPWAP-3-ERRORLOG: Did not get log server settings from DHCP.
    *Mar  1 00:01:00.451: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER.asf.gob.mx
    The thing is, I've been applying the instruction:
    capwap ap controller ip address 10.4.13.2
    'cause I want them to communicate with a remote controller, and the past eight did it fine, but this two didn't.
    As for the things I've already tried, I have reset it's parameters to it's initial settings, I've tried to load a new IOS image, I've cleared the flash memory, but nothing works, it keeps communicating with the old controller.
    How can I fix this? (I mean, changing or adapting the AP to a lightweight AP)
    Thanks in advance

    Its fine to try to apply it from the console...but if you really want to clear the AP, you need to clear the nvram.  so if changing the primary from the GUI that the AP has joined didn't work, then try this:
    debug capwap console cli
    erase /all nvram
    Example:
    Entered the username and password
    debug capwap console cli
    erase /all nvram:
    [confirm]
    undebug all
    reload
    [confirm]
    Thanks,
    Scott
    Help out other by using the rating system and marking answered questions as "Answered"

  • Error saying "There was an error opening this document, the filename, directory name, or volume label syntax is correct"

    At my work we uses Macs to prepare PDF’s and the create folders to archive and print them. Other areas of work use PC’s to review these PDF. When they go to review these folders there is a small black dot which appears under random characters in the folder name and when they try and open the file an error message saying “There was an error opening this document, the filename, directory name, or volume label syntax is correct”. On the PC they can delete the name and rename the folder and the error disappears. If anyone can shed some light on this it would be greatly appreciated.  If I was to have a guess I think its most likely an error with character recognition between the MAC and PC.  Any help would be great , thank you 

    See if this helps on the charachters...
    http://averstak.tripod.com/fatdox/names.htm

Maybe you are looking for

  • Not sure if I have a problem

    Hi All, Well, have my MBP 2.53 and started setting it up but seem to have a couple of issues and not sure if it's the MBP or if it's normal so any advice or input would be helpful. 1. When repairing permissions on the Unibody (10.5.5 with all updates

  • How do I get to the logic board on a PSC 2210?

    I would like to swap a logic board from a known good machine to one which is having issues. How do I get it out? This question was solved. View Solution.

  • Update Inbound Delivery with batch

    Hi All,      My requirement is that, if for an Inbound delivery, the batch(CHARG) field is found to be empty, then a batch need to be created and the batch number should be updated in the Delivery. The batch can be created using the BAPI 'BAPI_BATCH_

  • Fastest way of deleting a DIT

    Hi, We have a chained suffix which is connected to 4 back end suffixes. Each of these 4 suffixes have their counterparts in another node, and they have a replication agreement. And the whole system is duplicated on another geographical redundancy cen

  • Software Update stops responding

    Hello, After installing Yosemite on Mac Pro 3.1 (early 2008) i can't get updates to finish installing. (only Updates that require restart) The installation bar freezes halfway. The same thing on 10.10.0 updated version and 10.10.2 clean install. Is i