Error opening report as webservice when there's parameters!

I followed the instructions in the developer's guide: "Publishing and Consuming a Report as a Web Service"
I am using VS2008 and Crystal Reports 2008.
I have a web application with 1 report in it called CrystalReport1.rpt and this report is published as a service called CrystalReport1Service.asmx
The web service is working normally. I can browse to http://localhost:51132/CrystalReport1Service.asmx
I am trying to load the report in a windows application (VB.NET) using the following code in the form:
> Me.CrystalReportViewer1.ReportSource = "http://localhost:51132/CrystalReport1Service.asmx"
This code works as long as the report does not require any parameters.
When I modify the report to require a parameter (date param), the viewer displays the parameter popup window, when I enter the parameter and press OK I get an exception error in visual studio IDE, the exception is:
>System.NullReferenceException was unhandled
> Message="Object reference not set to an instance of an object."
> Source="CrystalDecisions.Windows.Forms"
> StackTrace:
>       at CrystalDecisions.Windows.Forms.ParameterFieldInfo.get_isDCP()
>       at CrystalDecisions.Windows.Forms.ParameterValueEditControl.Start()
>       at CrystalDecisions.Windows.Forms.ParameterUnit.AddEditControl(ParameterValue pv)
>       at CrystalDecisions.Windows.Forms.ParameterUnit.UpdateControls()
>       at CrystalDecisions.Windows.Forms.ParameterUnit.set_ParameterFieldInfo(ParameterFieldInfo value)
>       at CrystalDecisions.Windows.Forms.InteractiveParameterPanel.ShowParameters()
>       at CrystalDecisions.Windows.Forms.CrystalReportViewer.ShowInteractiveParameters()
>       at CrystalDecisions.Windows.Forms.CrystalReportViewer.ShowReport()
>       at CrystalDecisions.Windows.Forms.CrystalReportViewer.OnPaint(PaintEventArgs evtArgs)
>       at System.Windows.Forms.Control.PaintWithErrorHandling(PaintEventArgs e, Int16 layer, Boolean disposeEventArgs)
>       at System.Windows.Forms.Control.WmPaint(Message& m)
>       at System.Windows.Forms.Control.WndProc(Message& m)
>       at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
>       at System.Windows.Forms.ContainerControl.WndProc(Message& m)
>       at System.Windows.Forms.UserControl.WndProc(Message& m)
>       at CrystalDecisions.Windows.Forms.CrystalReportViewer.WndProc(Message& msg)
>       at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
>       at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
>       at System.Windows.Forms.NativeWindow.DebuggableCallback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
>       at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
The documentation for publishing a report as a web service does not mention any special way to handle parameters, the windows viewer seems to read the parameter info correctly and automatically displays the window to edit the parameter, but the error happens upon submitting the parameter by clicking ok, this seems like a bug doesn't it?
The report works fine if I open it directly from Crystal Reports 2008 or if I embed it in my windows application.
Thanks,
Talal Nehme

Hello, Talal;
When you create the report with the parameter, was it the same report just adding a parameter or a new report?
Did you recompile the report after adding the parameter so you have a new "CrystalReport1Service.asmx" file?
The Crystal Report viewer should pass the parameter value correctly to the report as long as the asmx file is the updated report.
If you look at the parameter in the report, is it a Date, Date Time or String with date value?
How are you passing the value at runtime - what does the format look like in the prompt?
You may want to test first with a string or number parameter to eliminate possible format issues and see if you can get the parameter to work.
Elaine

Similar Messages

Error opening file for writing when installing

I cannot install Flash on my Vista X64. I have tried running
the downloadable install and the online install. Any time I try to
run the install I get "error opening file for writing" when trying
to write C:\Windows\SysWOW64\Macromed\Flash\Flash9d.ocx.
I have uninstalled Fash first (it never worked anyway) and I
have rebooted. I even tried rebooting in Safe Mode but no matter
what I try, I cannot remove the existing Flash9d.ocx and installing
will not overwrite the existing file.
Even after uninstalling Flash and rebooting to safe mode,
Windows reports that flash9d.ocx is in use. So why is the file in
use after uninstalling?
Any help is appreciated.
Dale

Well, I finally figured out the problem with mine today. Of
course, I'd still like to know what nefarious purpose might be
involved with the Flash activeX file being loaded in memory even
after uninstall and reboot such that it cannot be removed from my
PC even in Safe Mode.
At least I got Flash working. I discovered that Flash was
disabled in IE.
In IE, go to Tools->Options->Programs and then Manage
Add-Ons. In my case, the ShockWave Flash Object was set to
disabled. I changed it to Enabled and I was able to install and use
Flash properly. Now I am just not sure I want to.
With the questionable practices of using the ActiveX control
even after uninstall, and making the file un-removable, along with
the extremely (in my opinion) dishonest practice of installing
Google Toolbar with Flash, I am hoping that Microsoft's Silverlight
puts Flash out of the market - and I'm no huge fan of Microsoft
either. With the new practices from Adobe, they are, in my opinion,
no better than any other spyware and malware purveyor on the market
- right up there with Napster and the dozens of follow-on products
that tricked users into installing unwanted software.

FinRep 9.3.1: All users getting error opening reports from root directory

We are having an irritating, although not missiion critical error
When a user (any user) attempts to open a report from the explorer view in Financial Reporting 9.3.1, we receive an "_Error 1000165"._ No explanation is provided. No folders are openable within the explorer view except "Personal Page."
It is possible to open reports by opening a report that got accidentally stored in the root directory and then opening another report from the menu system in the usual way. So it is not a user permissions/provisioning issue.
Is there a fix to this? I am afraid someone will clean out the root directory and then we won't be able to access our reports.
Update: I can use the pattern "VariancePercent([B(A)],[A(A)])" to cut this to 27 Columns by varying the direct reference to the column. But is there an easier way to do this?
Edited by: user10868938 on Feb 24, 2009 3:43 PM

We have been able to complete the update of our users SSID's in our Planning SQL tables through the utility. We had to create the users in Essbase first though.
However, if I try to log into Planning (through Workspace) I still cannot see the Planning applicaitons I should have access too. In Shared Services if I pull up my network ID and View Report, I do not get any Planning groups to show up that I belong too. I can open the group in HSS and see my ID is in it but when I do the View Report on my ID nothing comes up.
Additionally, if I add a user from scratch to the existing Planning groups that we've migrated and do the View Report they will show up for that user and the security passes through to Planning/Essbase so that I could log on fine. So, the problem is not with adding new users but the existing one's that were migrated. HSS shows the users in the groups but if you view a Report for those users it doesn't look like you belong to any groups.
We are going to apply a patch to Shared Services to see if it helps. It's suppose to deal with Groups that have users from multple domains but one set of those users cannot log into the application they should have access too. We applied this in our stand-alone S9 Essbase environment a couple of months ago to deal with a break between our existing users and groups from HSS to Essbase. Maybe this will be the final piece.

"Error opening installation log file" when installing Photoshop Elements 10

I bought Photoshop Elements 10 , Premiere Elements 10 .... I got the Premiere to download no problem but i can't get the photoshop to download. This is the msg that I am getting when I try to dl it "Error opening installation log file. Verify that the specified log file location exsists and is writable". Not sure why I can download one and not the other since they are both on the same disc. Plus in the program that I purchased I has 5 DVD's. Any suggestions??
Thanks
Message title was edited by: Brett N

Install Premiere Elements, Photoshop Elements
Mylenium

Error Opening Reports (Cannot find Dimension Scenario, Error executing query: the member null doesn't exist in this application)

Hello,
two of our users get the following error message, when opening two specific reports:
First Report: Cannot find Dimension Scenario.
Second Report: Error executing query: the member null doesn't exist in this application.
Other users can access these reports, and the same users where the problem occurs can access other reports in the same folder.
I set the same rights for me, but i can access the reports without problems.
Somebody encountered the same problem before?

Hi there,
I had the same issue a few weeks ago... not sure how it happened but it was related only with my username.
In order to fix it:
1. I created a report which does not require to select the scenario in advance. Try to use the default data-grid that you get when you first create a report for example.
2. When the user runs the report, try to see if he can see the dimension. Do not use the missing dimension on rows or columns. If he can see the dimension, ask him to select one scenario. This will solve the issue.
3. If he cannot see the dimension, try to change the layout of the report.
Regards,
Thanos

Error opening report using WEB.SHOW_DOCUMENT

Hi
I have a report in pdf format that opens ok by itself. When I use WEB.SHOW_DOCUMENT in the when_mouse_click trigger on the item in the form the report doesnt display. Only an IE window with "The page cannot be displayed" message.
Here is the trigger code:
Web.show_document(http://nbotlaguduru.dms.local/export/||FMSLaborChargesalcs20060829132645.pdf)
where FMSLaborChargesalcs20060829132645.pdf is the name of the report I am trying to open.
Here is the URL that appears in the second window that opens:
http://nbotlaguduru.dms.local/export/FMSLaborChargesalcs20060829132645.pdf
this url generates the error message "The page cannot be displayed"
I am using Forms [32 Bit] Version 10.1.2.0.2 (Production)
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
Report Builder 10.1.2.0.2
ORACLE Server Release 10.1.0.4.2
and I running the forms and reports server on my local machine.
Any help would be greatly appreciated. Thanks

Thanks for answering,
I changed the URL from
http://nbotlaguduru.dms.local/export/FMSLaborChargesalcs20060829132645.pdf
to
http://nbotlaguduru.dms.local:8889/export/FMSLaborChargesalcs20060829132645.pdf
and the same problem occured
the file is located on my local C drive in:
C:\lcs\export
seems as though I am missing something else as well
any ideas?

Error Creating Reports Server Components when installing 11.1.1.2

Hi There
I'm trying to install a A WLS(11.3.2) and Forms/Report 11g (11.1.1.2 bundle) on a Linux RedHat 5.5.
But when the configuration tools of Forms/Reports is trying to create the reports server I got the following error:
Executing Task: Creating Reports Server Components
ALERT: Invalid component name: ReportsServer_fd-red03.in.fd.dk_asinst_1 (Component name must begin with an alphabetic character; may only contain alphanumeric characters, or the underscore (_) or hyphen ( -) characters; and must be 4 to 30 characters long.) Continuing anyway.
progress in calculate progress4
Executing Task: Executing: opmnctl startproc ias-component=ReportsServer_fd-red03.in.fd.dk_asinst_1
GJS: About to call startOpmn
GJS: Entered startOpmn
*************** Trying to Start OPMN **************
*************** Executing Command **************
/home/oastest/Oracle/Middleware/asinst_1/bin/opmnctl startproc ias-component=ReportsServer_fd-red03.in.fd.dk_asinst_1
As I read the error message is the component name illegale and I guees that whats cause the Report Server to faile.
But how does the install tool figure out the name: ReportsServer_fd-red03.in.fd.dk_asinst_1 ?
And how do I prvent it from happens again.
Note: "fd-red03.in.fd.dk" is the full hostname
Regards Hans S

Hello Hans. Did you ever find a resolution to this problem? I'm encountering the same issue and cannot find much information online pertaining to this problem. Can you tell me if you found a solution or any useful posts pertaining to this problem?
Thanks,
Pablo

Error in chart legend totals when there is a negative number involved

Post Author: dawnyanne
CA Forum: Charts and Graphs
Hi
if anyone can help me I would be extremely grateful!
I have a pie chart with a legend. There are just two values that are showing but one of the values is a negative value and the total of the legend is adding up incorrectly. Here is how it is showing at the moment
Cash                 -0.71
Uk Equities     100.71
Total              101.42
here is how it should be
Cash               -0.71
UK Equities   100.71
Total             100.00
I can set the chart amounts to be percentage - but then it comes out as only one decimal place and I need two.
Any help would be very much appreciated!
kind regards
Dawnyanne
Filed under: chart legend incorrect totals negative values

First see KnowledgeBase Entry 1XPH5BV7.
What processor speed was the Windows NT machine? What is the processor speed of the PXI-8170 (700 or 850 MHz). How many channels are you aquiring? Which version of LabVIEW Real-Time are you using? Which version of NI-DAQ are you using? Are you using an example program or one of your own programs? What priority are you running the VI at? (Time critical priority is recommended for DAQ VIs - remember to provide sleep time to allow lower priority operations, such as the user interface thread, to run).
If you feel this behavior may be a bug, please contact National Instruments technical support.
Regards,
Chad H.
Applications Engineering
National Instruments
http://www.ni.com/ask

Compler error "integer no too long" when there is no integer

My compiler complains that the interger value is too long.
i want to generate a 12 digit random pin numbers. i have this code that wont compile.
{private void generate()
      Long pinNumber=0;
      int no=100;
      for(int counter=0;counter<no;counter++)
          pinNumber=Math.round(Math.random()*1000000000000);;
}}

faustofrancis wrote:
pinNumber=Math.round(Math.random()*1000000000000);;The largest valid integer is 2147483647. You'll need to use longs, which means suffixing long constants with "L".
Also, multiplying Math.random() by a large number isn't a good idea, since it returns an int double. In addition, are PINs that begin with 0 okay?
Edited by: paul.miner on Dec 10, 2007 10:55 PM

Oracle Reports : Run time error when there is a call to DBMS_LOB package

I am facing a strange issue, please do share if you have some inputs. When I try running the compiled RDF report(Generating XML to be specific), Oracle Reports Builder crashes when I make use of the following formula function. Strangely, this works fine in the backend. Moreover I tried debugging and by trial and error method found out that, when there is a call to the DMBS_LOB package it errors (works fine when this is commented). Please do let me know whats the root cause of this issue. Thanks in advance
function CF_ClientSignatureFormula return VARCHAR2 is
file_name BFILE;
dir_name VARCHAR2(100);
dest_file_name VARCHAR2(100);
dest_path VARCHAR2(400);
begin
     SELECT client_signature
          INTO file_name
          FROM xxfpr.fpr_rcp_bank_details frb,
          Xxfpr. fpr_rcp_gtn_rpt_map frm
          WHERE frb.record_id = frm.bank_record_id
          AND frm.gtn_request_id = :p_gtn_request_id;
SYS.DBMS_LOB.filegetname(file_name,dir_name,dest_file_name);
SELECT directory_path INTO dest_path FROM all_directories where directory_name = dir_name;
dest_path := dest_path || '/' || dest_file_name;
return dest_path;
EXCEPTION
     WHEN OTHERS THEN
          RETURN NULL;
end;
Thanks,
NirmalGeo

And what version of Reports are you using?
BFILES are accessible from the database, not the client (Reports). So, put your code in the database.

After Effects error opening sound componant (-2166)

Hi
Im getting this error message( After Effects error-opening sound componant (-2166 )
When i go to render a comp that icludes several sound files (WAV) the render stops 80% of the time.is there a way to fix this.
Im rendering to Quicktime based on losssles or AVI based on lossless
Windows XP service pack 3
3 gigs ram
quad core
Quicktime pro latest version installed november 2009

This could happen for any of several reasons, including the sound files using sample rates or a number of channels that After Effects can't handle. After Effects is not the best at working with audio. I recommend converting the audio files to another format (such as AIFF), ensuring that the sample rate is something standard, making sure that the files are just plain old stereo, and trying again.

Display 'No Data Found' when there is inv data but still there is xml data

Hi,
I am converting an rdf to BI publisher. The issue is when there is no detail (inv) but still there is still xml data , due to which the report is getting printed with the skeleton template and blank details(inv).
I need to avoid printing the report out if there is not inv detail even though there is xml data. or atleast show 'NO DATA FOUND' msg. and print the report output only when there is inv data.
Any help is greatly appreciated.
sample XLM generated when there is inv data:
- <ARXCBI>
- <LIST_G_SETUP>
- <G_SETUP>
<COMPANY_NAME>GL SOB</COMPANY_NAME>
<FUNCTIONAL_CURRENCY>USD</FUNCTIONAL_CURRENCY>
<COA_ID>23456</COA_ID>
<SET_OF_BOOKS_ID>1</SET_OF_BOOKS_ID>
<LIST_G_SITES />
<REPORT_NAME>Billing Invoice</REPORT_NAME>
<SUB_TITLE />
</G_SETUP>
</LIST_G_SETUP>
<RP_COMPANY_NAME>GL SOB</RP_COMPANY_NAME>
<RP_REPORT_NAME>Billing Invoices</RP_REPORT_NAME>
<RP_DATA_FOUND />
<RP_SUB_TITLE />
<R_DEFAULT_COUNTRY>US</R_DEFAULT_COUNTRY>
<R_DEFAULT_COUNTRY_DESC>United States</R_DEFAULT_COUNTRY_DESC>
<T_REPORT_TOTAL />
<RP_COUNTER />
<INV>Invoice</INV>
<CM>Credit Memo</CM>
<ADJ>Adjustment</ADJ>
<XREV>Reverse Cross Site Credit Memo</XREV>
<XAPP>Apply Cross Site Credit Memo</XAPP>
</ARXCBI>
Thanks!

Hi Srini,
Now I am running into another problem. When there is no detail data it displays 'No data found' as expected in the report output. But is there any way to restrict the print option (avoid wasting the paper) to just display 'No data found' in the output but not to print the output only in this case.
I really appreciate any help!

Error opening an RFC connection. FM: AC_FLUSH_CALL

In my code I have the return code 7 and message "Error opening an RFC Connection" when the function module AC_FLUSH_CALL is called.
Where can I start to find the error.
Thanks.

please help. Thanks.

"Software Usage Metrics initialize failed" error when open Report Manager, after moving ReportServer from SSRS 2008 to SSRS 2012 (Native Mode)

I've asked this question in SQL Server Upgrade forume, I'm asking here as well:
Your help is highly appreciated!
After migrating ReportServer db from 2008 to 2012, when access Report Manager throughhttp://myserver:80/Reports, I got the error below:
ui!ReportManager_0-3!11d8!02/04/2013-15:19:12:: e ERROR: Software Usage Metrics initialize failed
The process is below:
•I successfully installed SQL Server 2012 (64-bit) Enterprise as a Native Mode on a server who runs Windows 7 Enterprise SP1 (64-bit).
•I restored "ReportServer2008To2012" and "ReportServer2008To2012TempDB" in SSRS 2012 from the db files backed up in SQL 2008. In SSRS 2008, I have SSRS Model, ad-hoc reports based on model, and I also have canned reports built through BIDS
report server project.
•I reconfigured both databases' Compatibility level to SQL Server 2012(110) from SQL Server 2008(100).
•I configured SSRS through Reporting Services Configuration Manager as below:
> I chosen "Use built-in account:" as Service Account
> In "Database" tab, I selected "Choose an existing report server database" and choose "ReportServer2008To2012" db, I used "Windows Authentication" (my login has the System Administrator priviledge). I got all 4 parts
success: Verifying database sku = Success; Generating rights scripts = Success; Applying connection rights = Success; Setting DSN = Success.
> I went to "Scale-out Deployment" to check if the initializing succeed, I found nothing there.
Here are what I did from different approaches:
A •I went to "Encryption Keys" and restored the key I backed up from SSRS 2008, after retoring, I got two initialized instances: One is on my current server (SSRS 2012), the other one is from the old server (SSRS 2008).
   I deleted the old one(SSRS 2008) through "Remove Server" action and kept the one on my current server(SSRS 2012).
   After I restart SSRS service, and tried to connect Report Manager, I got "An internal error occurred on the report server. See the error log for more details."
   I checked the log file, the error is actually "ERROR: Software Usage Metrics initialize failed"
B •I also tried to "Delete Encrypted Content" and did see the SSRS was initialized through checking it on "Scale-out Deployment", however when I tried to open Report Manager, I got the same error.
Anyone had the same issue? Any solution? Thanks in advance!

Your help is highly appreciated!
After migrating ReportServer db from 2008 to 2012, when access Report Manager through
http://myserver:80/Reports, I got the error below:
ui!ReportManager_0-3!11d8!02/04/2013-15:19:12:: e ERROR: Software Usage Metrics initialize failed
The process is below:
•I successfully installed SQL Server 2012 (64-bit) Enterprise as a Native Mode on a server who runs Windows 7 Enterprise SP1 (64-bit).
•I restored "ReportServer2008To2012" and "ReportServer2008To2012TempDB" in SSRS 2012 from the db files backed up in SQL 2008. In SSRS 2008, I have SSRS Model, ad-hoc reports based on model, and I also have canned reports built through BIDS
report server project.
•I reconfigured both databases' Compatibility level to SQL Server 2012(110) from SQL Server 2008(100).
•I configured SSRS through Reporting Services Configuration Manager as below:
> I chosen "Use built-in account:" as Service Account
> In "Database" tab, I selected "Choose an existing report server database" and choose "ReportServer2008To2012" db, I used "Windows Authentication" (my login has the System Administrator priviledge). I got all
4 parts success: Verifying database sku = Success; Generating rights scripts = Success; Applying connection rights = Success; Setting DSN = Success.
> I went to "Scale-out Deployment" to check if the initializing succeed, I found nothing there.
Here are what I did from different approaches:
A •I went to "Encryption Keys" and restored the key I backed up from SSRS 2008, after retoring, I got two initialized instances: One is on my current server (SSRS 2012), the other one is from the old server (SSRS 2008).
   I deleted the old one(SSRS 2008) through "Remove Server" action and kept the one on my current server(SSRS 2012).
   After I restart SSRS service, and tried to connect Report Manager, I got "An internal error occurred on the report server. See the error log for more details."
   I checked the log file, the error is actually "ERROR: Software Usage Metrics initialize failed"
B •I also tried to "Delete Encrypted Content" and did see the SSRS was initialized through checking it on "Scale-out Deployment", however when I tried to open Report Manager, I got the same error.
Anyone had the same issue? Any solution? Thanks in advance!

Login error with report viewer when opening Crystal report with subreport

Hi
I have a problem with a login error (database vendor code 18456) when I try to open a crystal report to view it.
The report uses data from an external payroll database but I'm running it via our Accounts system (it's a convenient front end for users to run the report from). This works fine for another report that doesn't have any subreports. However when I run the Crystal report that has subreports, the report generation process works but when the crystal reports viewer tries to open the report I get the login error. It doesn't seem to be passing the login details for the payroll database down to the subreport.
I'm using Crystal Reports version 11.0.0.1282. The Accounts system is Technology One. Tech One have provided a report template that has several formulas designed to allow Tech One to play nicely with Crystal. One of these formulas allows me to enter the nickname of the external database that the report needs to use. The external database's connection details are fully specified in the Tech One configuration section (server console). So in this case the report says use database U1 & the server console identifies U1 as being the payroll database, specifies the connection path & has the username & password required to logon to the payroll database/server.
The report is running ok & retrieving data, but for some reason the viewer is erroring. If anyone has any ideas for how I can get the login details used to run the main report to flow through to the subreport it would be much appreciated.
Thanks
Sue

I understand your frustration. We can do a few things. But really, it should be Technology One contacting us. To use an analogy (which you are free to share with Technology One). They built a car and sealed the hood. You bought the car, but he engine does not quite run as it should. You bring the car to the mechanic and all he can do is look at the car as he can not even open the hood.
In any case, here is what I would do if I could open the hood (e.g.; if I was dealing with Technology One):
1) Look up database vendor code 18456. This is simply the error our print engine is receiving from the database client and it simply passes it through relatively unhandled. This you should be able to do your self or ask Technology One to tell you what that means.
2) Break out the subreport and see if it runs on it's own in the application (if this is a permissions issue - which I doubt - it should come up here too). Unfortunately, this is for Technology One to do...
3) Run the report (with the subreport) in the CR designer. Does it work there? If this is a win app and it works, we again eliminated permission issues. And we also confirmed that the report is good. Again, Technology One should do this for you.
BTW.; CR 11.0 is out of support - not sure if you or Technology One are aware of this...
4) Can the developer duplicate the issue on his development computer?
Now, there are couple of instances where you say something like; "the report works and gets data, but the viewer errors out":
+The report is running ok & retrieving data, but for some reason the viewer is erroring.
However when I run the Crystal report that has subreports, the report generation process works but when the crystal reports viewer tries to open the report I get the login error. +
How do you know the report is retrieving data? From the error I would say the report never connects, thus the error / request for a logon...
So, the short of all of this is; get Technology One to contact us. They can do it over the forums or obtain a phone case here;
http://store.businessobjects.com/store/bobjamer/en_US/pd/productID.98078100
Now, here is a warning. As CR 11.0 is out of support Technology One will have to upgrade to CR 11.5, before that can create a phone case, which for them and you brings up another bunch of issues...
If you do not get any joy from the support person at you are talking to at Technology One, get him to escalate the issue. They are the ones that should be talking to us...
Ludek

Error opening report as webservice when there's parameters!

Similar Messages

Maybe you are looking for