ERROR (ORA-01002) when Ioading a table by UPDATE/INSERT

I get the error message ORA-01002 ( Fetch out of sequence ) when I am loading a table by UPDATE/INSERT.
At de Runtime Audit Viewer the process of loading update a number of register, in that case 44.050 and to the left register I get the error message that I show above.

Can you please give us some details about your source and targets. I have used UPDATE/INSERT but I did not get this kind of error.
rgds
-AP

Similar Messages

Error ORA-10635 when shrink a table!!

Hi all,
I have a table created in a tablespace using ASSM and when i try to shrink this table i receive the error ORA-10635. I can do shrink on other tables that are on the same tablespace of that table that is giving me this error.
Anyone can help please??
Tks,
Paulo.

10635, 00000, "Invalid segment or tablespace type"
// *Cause: Cannot shrink the segment because it is not in auto segment space
// managed tablespace or it is not a data, index or lob segment.
// *Action: Check the tablespace and segment type and reissue the statement

Error ORA-01002: fetch out of sequence

Hi all,
I created 3 cursors. The scenario is like following :
Begin Cur A
Begin FOR xx IN Cur B LOOP
Begin FOR xx IN Cur C LOOP
End LOOP Cur C;
commit;
End LOOP Cur B;
End Cur A;
When i run the program its display error ORA-01002: fetch out of sequence.
The objective of my program is to insert into table and commit every transaction.
Kindly share info with me why this error happened.
TQ.
tim

Tim,
Refer to the following:
ORA-01002: fetch out of sequence
Cause: This error means that a fetch has been attempted from a cursor which is no longer valid.
Note that a PL/SQL cursor loop implicitly does fetches, and thus may also cause this error. There are a number of possible causes for this error, including:
1) Fetching from a cursor after the last row has been retrieved and the ORA-1403 error returned.
2) If the cursor has been opened with the FOR UPDATE clause, fetching after a COMMIT has been issued will return the error.
3) Rebinding any placeholders in the SQL statement, then issuing a fetch before reexecuting the statement.
Action:
1) Do not issue a fetch statement after the last row has been retrieved - there are no more rows to fetch.
2) Do not issue a COMMIT inside a fetch loop for a cursor that has been opened FOR UPDATE.
3) Reexecute the statement after rebinding, then attempt to fetch again.
HTH,
Thierry
Edited by: Thierry H. on May 4, 2011 12:30 PM Reformatting

ORA-19007 when coping a table with an xml type in it to a new schema in the

ORA-19007 when coping a table with an xml type in it to a new schema in the same database.
Hi all,
When I copy a table with an xml type in it to a new schema in the same database I get an ora-19009.
The setup is as follows I have a schema a with table TABLE_WITH_XMLTYPE where data is:
CREATE
TABLE TABLE_WITH_XMLTYPE
FOLDER_ID NUMBER (10, 0) NOT NULL,
SEARCH_PROPERTIES XMLTYPE ,
CONSTRAINT TABLE_WITH_XMLTYPE PK PRIMARY KEY (FOLDERID) USING INDEX
XMLTYPE COLUMN SEARCH_PROPERTIES XMLSCHEMA
"http://xxxxxxx.net/FolderProperties.xsd" element "FolderProperties"
VARRAY SEARCH_PROPERTIES."XMLDATA"."PROPERTIES"."PROPERTY" STORE AS TABLE
PROPERTY_TABLE
(PRIMARY KEY (NESTED_TABLE_ID, ARRAY_INDEX)) ORGANIZATION INDEX OVERFLOW
Both schemas have the following xml schema registered as a local xml schema
BEGIN
DBMS_XMLSCHEMA.registerSchema(
SCHEMAURL => 'http://xxxxxxx.net/FolderProperties.xsd',
SCHEMADOC =>
'<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns:xdb="http://xmlns.oracle.com/xdb"
xdb:storeVarrayAsTable="true">
<xs:element name="FolderProperties"
type="FolderPropertiesType"
xdb:defaultTable="FOLDER_SEARCH_PROPERTIES" />
<xs:complexType name="FolderPropertiesType" xdb:SQLType="FOLDERPROPERTIES_T">
<xs:sequence>
<xs:element name="FolderID" type="FolderIDType" minOccurs="1" xdb:SQLName="FOLDER_ID"/>
<xs:element name="Properties" type="PropertiesType" xdb:SQLName="PROPERTIES"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="PropertiesType" xdb:SQLType="PROPERTIES_T">
<xs:sequence>
<xs:element name="Property" type="PropertyType" maxOccurs="unbounded"
xdb:SQLName="PROPERTY" xdb:SQLCollType="PROPERTY_V"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="PropertyType" xdb:SQLType="PROPERTY_T">
<xs:sequence>
<xs:element name="DateValue" type="DateType" xdb:SQLName="DATE_VALUE"/>
<xs:element name="NumValue" type="NumType" xdb:SQLName="NUM_VALUE"/>
<xs:element name="StringValue" type="StringType" xdb:SQLName="STRING_VALUE"/>
</xs:sequence>
<xs:attribute name="Name" xdb:SQLName="NAME" xdb:SQLType="VARCHAR2">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:minLength value="1"/>
<xs:maxLength value="255"/>
</xs:restriction>
</xs:simpleType>
</xs:attribute>
</xs:complexType>
<xs:simpleType name="FolderIDType">
<xs:restriction base="xs:integer"/>
</xs:simpleType>
<xs:simpleType name="DateType">
<xs:restriction base="xs:dateTime"/>
</xs:simpleType>
<xs:simpleType name="NumType">
<xs:restriction base="xs:decimal"/>
</xs:simpleType>
<xs:simpleType name="StringType">
<xs:restriction base="xs:string" />
</xs:simpleType>
</xs:schema>',
LOCAL => TRUE,
GENTYPES => TRUE,
GENTABLES => FALSE);
END;
when I try to do the following insert:
insert into schemaB.TABLE_WITH_XMLTYPE ( FOLDER_ID, SEARCH_PROPERTIES)
select FOLDER_ID, SEARCH_PROPERTIES from schemaB.TABLE_WITH_XMLTYPE;
I’ll get an ora-19007.
Can some one point me in the right direction how to solve this error.
Thanks Roelof.

Who did you create the second table, in other words, how did you COPY the table as you said...
If you created the second table via a CTAS (create table as select) then you will have created a table that is not the same as the original one. AFAIK I have once created an enhancement request for this after discovering that JDeveloper, for example, creates a "copy" via a CTAS which creates the wrong structure. Double check via package DBMS_METADATA.
SQL> set long 1000000
SQL> select DBMS_METADATA('TABLE','TABLE_WITH_XMLTYPE','SchemaA') from dual;
SQL> select DBMS_METADATA('TABLE','TABLE_WITH_XMLTYPE','SchemaB') from dual;If you have got two different tables, than Mark's solution should help.
M.
Edited by: Marco Gralike on Feb 15, 2009 11:16 AM

Encounter ORA-01002 when calling OCIStmtFetch2 to fetch blob data

Oracle Version：Release 10.2.0.1.0
Description:
We use these two functions to fetch the content of blob field dynamically in batch mode:
OCIDefineByPos(OCI_DYNAMIC_FETCH)
OCIDefineDynamic(callbackfun->cbf_get_data)
We allocate fixed memory to fetch data in order to using compact memory.
If the size of blob to be fetched is larger than the allocated memory size, the fetch can not be done in one call, which need to be interrupted.
Those records would remain in cache and can only be fetched until calling OCIStmtFetch2 next time.
The callback function:cbf_get_data, achieves this by returning OCI_ROWCBK_DONE, which marks current fetch interrupted.
It would not return OCI_CONTINUE, because OCI_CONTINUE can not interrupt current fetch procedure in time.
We made a sample code test, and found this logic only works when fetching small rows (nearly 800 rows). Exceptions occurred when fetching more rows(>=1000 rows).
For example, among these 2 cases,
1.（OCIStmtFetch2(m_stmthp,m_errhp,(ub4)800,OCI_FETCH_NEXT,(sb4)OCI_FETCH_RELATIVE,OCI_DEFAULT)
2.（OCIStmtFetch2(m_stmthp,m_errhp,(ub4)1000,OCI_FETCH_NEXT,(sb4)OCI_FETCH_RELATIVE,OCI_DEFAULT)
only the 1st one work, but the 2nd.
After function cbf_get_data returns OCI_ROWCBK_DONE, calling OCIStmtFetch2 did not enter into callback function cbf_get_data.
And OCIErrorGet showed such error:
ORA-01002: fetch out of sequence
the total number of result set is about 100,000.
We tried to set PREFETCH to a larger value in this way::
OCIAttrSet(m_stmthp,OCI_HTYPE_STMT,(dvoid *)&rnum,0,OCI_ATTR_PREFETCH_ROWS,m_errhp);
rtn=OCIAttrSet((dvoid *)m_stmthp, (ub4) OCI_HTYPE_STMT,(dvoid *)&preFetch, (ub4)sizeof(preFetch), OCI_ATTR_PREFETCH_MEMORY,m_errhp);
but it did not help.
Waiting for you guidance.
Thanks in advance!
-Andy
Edited by: Andy Tong on 2010-10-22 上午12:29

Here is our testing Code：
#include "oci.h"
#include<stdio.h>
#include<stdlib.h>
#include<string.h>
#pragma comment(lib,"oci.lib")
char buf1[5000];
char buf2[5000];
long datalen=5000;
ub4 outpos=1;
ub4 outpos2=2;
int sum=0;
int sum2=0;
OCIError *m_errhp;
OCIStmt *m_stmthp;
char LOBBuf[8006];
long LOBLen=8006;
long gindpp=0;
ub2 grcpp=0;
#define MAX_ROW_NUM 56338
/* Fetch callback to specify buffers. */
sb4 cbf_get_data( dvoid* ctxp,
 OCIDefine* dfnhp,
 ub4 iter,
 dvoid** bufpp,
 ub4** alenpp,
 ub1* piecep,
 dvoid** indpp,
 ub2** rcpp)
 if(iter==0)
 sum=0;
 else if(iter>=858) //857 exception
 //LOBBuf,LOBLen
 // sum+=LOBLen;
 // if(sum>1057552-100*1024)
 sum=0;
 bufpp=(dvoid)0;
 alenpp=(ub4)0;
 *piecep = (ub1)OCI_ONE_PIECE;
 indpp = (dvoid ) 0;
 rcpp = (ub2 ) 0;
 return(OCI_ROWCBK_DONE);
 LOBLen=8006;
 bufpp=(dvoid)LOBBuf;
 alenpp=(ub4)&LOBLen;
 *piecep = (ub1)OCI_ONE_PIECE;
 indpp = (dvoid )&gindpp;
 rcpp = (ub2 )&grcpp;
 return(OCI_CONTINUE);
BOOL CTest_ociApp::InitInstance()
 OCIEnv * m_envhp;
 OCIServer * m_srvhp;
 OCISvcCtx * m_svchp;
 sword rtn;
 char sqlState[256];
 int nativeErr;
 char errTxt[256];
 unsigned long bufLen=256;
 OCIDefine hDefine = (OCIDefine ) 0;
 OCIDefine hDefine1 = (OCIDefine ) 0;
 OCIDefine hDefine2 = (OCIDefine ) 0;
 OCIDefine hDefine3 = (OCIDefine ) 0;
 OCIDefine hDefine4 = (OCIDefine ) 0;
 int i;
 OCILobLocator** lob_array;
 char username[255];
 char password[30];
 char dbname[30];
 char szSqlStr[255];
 ub4 preFetch= 10*1024*16;
 strcpy(username,"dlg25w");
 strcpy(password,"sa");
 strcpy(dbname,"WIN10G");
 OCIEnvCreate(&m_envhp, OCI_DEFAULT | OCI_OBJECT, 0, 0, 0, 0, 0, 0);
 OCIHandleAlloc( (dvoid *)m_envhp, (dvoid **)&m_errhp,OCI_HTYPE_ERROR,(size_t) 0, (dvoid **) 0);
 OCIHandleAlloc( (dvoid *)m_envhp, (dvoid **)&m_srvhp,OCI_HTYPE_SERVER,(size_t) 0, (dvoid **) 0);
 OCIHandleAlloc( (dvoid *)m_envhp, (dvoid **)&m_svchp,OCI_HTYPE_SVCCTX,(size_t) 0, (dvoid **) 0);
 OCIHandleAlloc( (dvoid *)m_envhp, (dvoid **)&m_stmthp,OCI_HTYPE_STMT,(size_t) 0, (dvoid **)0);
 OCIServerAttach(m_srvhp, m_errhp,(text *)dbname, strlen(dbname),(ub4) OCI_DEFAULT);
 OCILogon(m_envhp,m_errhp,&m_svchp,(text *)username,strlen(username),(text *)password,strlen(password),(text *)dbname,strlen(dbname));
 ub4 rnum=0;
 unsigned int len=0;
 //rtn=OCIAttrGet(m_envhp,OCI_HTYPE_ENV,(dvoid *)&rnum,&len,OCI_ATTR_CACHE_MAX_SIZE,m_errhp);
 OCIErrorGet((dvoid *) m_errhp,(ub4)1,(OraText *)sqlState,&nativeErr,(unsigned char*)errTxt,bufLen,(ub4) OCI_HTYPE_ERROR);
 len=4;
 rnum=83886080;
 rtn=OCIAttrSet(m_envhp,OCI_HTYPE_ENV,(dvoid *)&rnum,len,OCI_ATTR_CACHE_OPT_SIZE,m_errhp);
 rtn=OCIAttrGet(m_envhp,OCI_HTYPE_ENV,(dvoid *)&rnum,&len,OCI_ATTR_CACHE_OPT_SIZE,m_errhp);
 OCIErrorGet((dvoid *) m_errhp,(ub4)1,(OraText *)sqlState,&nativeErr,(unsigned char*)errTxt,bufLen,(ub4) OCI_HTYPE_ERROR);
 rnum=2000;
 sprintf( szSqlStr,"%s", "SELECT DATA FROM MF4");
 OCIStmtPrepare(m_stmthp, m_errhp, (text*)szSqlStr, (ub4)strlen(szSqlStr),(ub4) OCI_NTV_SYNTAX, (ub4)OCI_DEFAULT);
OCIAttrSet(m_stmthp,OCI_HTYPE_STMT,(dvoid *)&rnum,0,OCI_ATTR_PREFETCH_ROWS,m_errhp);
 /* initialize array of locators */
 OCIDefineByPos(m_stmthp, &hDefine2, m_errhp, (ub4)1,(dvoid *)0,(sb4)8006,SQLT_BIN,(dvoid *)0, (ub2 *)0, (ub2 *)0,(ub4) OCI_DYNAMIC_FETCH);//OCI_DYNAMIC_FETCH
 OCIDefineDynamic(hDefine2, m_errhp, (dvoid *)&outpos,(OCICallbackDefine)cbf_get_data);
 OCIStmtExecute(m_svchp, m_stmthp, m_errhp,(ub4)0, (ub4) 0,(const OCISnapshot*) 0,
 (OCISnapshot*)0,(ub4)OCI_DEFAULT);//OCI_STMT_SCROLLABLE_READONLY
 rtn=OCIAttrSet((dvoid *)m_stmthp, (ub4) OCI_HTYPE_STMT,(dvoid *)&preFetch, (ub4)sizeof(preFetch), OCI_ATTR_PREFETCH_MEMORY,m_errhp);
 while(1)
 rtn=OCIStmtFetch2(m_stmthp,m_errhp,(ub4)1000,OCI_FETCH_NEXT,(sb4)OCI_FETCH_RELATIVE,OCI_DEFAULT);
 OCIErrorGet((dvoid *) m_errhp,(ub4)1,(OraText *)sqlState,&nativeErr,(unsigned char*)errTxt,bufLen,(ub4) OCI_HTYPE_ERROR);
 if(rtn==OCI_NO_DATA)
 break;
 else
 t0=GetTickCount()-t0;
 t0=0;
 OCIAttrGet((CONST void *)m_stmthp,OCI_HTYPE_STMT,(void *)&rows_fetched,(ub4 *)sizeof(rows_fetched),OCI_ATTR_ROW_COUNT ,m_errhp);
 printf("\n Total number of records：%d",rows_fetched);
 OCILogoff( m_svchp, m_errhp );
 OCIServerDetach( m_srvhp, m_errhp, OCI_DEFAULT );
 OCIHandleFree((dvoid *) m_stmthp, OCI_HTYPE_STMT);
 OCIHandleFree((dvoid *) m_svchp, OCI_HTYPE_SVCCTX);
 OCIHandleFree((dvoid *) m_srvhp, OCI_HTYPE_SERVER);
 OCIHandleFree((dvoid *) m_errhp, OCI_HTYPE_ERROR);
 getchar();
 return FALSE;
}

Error ORA-06502 When using function REPLACE in PL/SQL

Hi,
I have a PL/SQL procedure which gives error 'Error ORA-06502 When using function REPLACE in PL/SQL' when the string value is quite long (I noticed this with a string 9K in length)
variable var_a is of type CLOB
and the assignment statement where it gives the error is
var_a := REPLACE(var_a, '^', ''',''');
Can anyone please help!
Thanks

Even then that shouldn't do so:
SQL> select overload, position, argument_name, data_type, in_out
2 from all_arguments
3 where package_name = 'STANDARD'
4 and object_name = 'LPAD'
5 order by 1,2
6 /
OVERLOAD   POSITION ARGUMENT_NAME                  DATA_TYPE                      IN_OUT
1                 0                                VARCHAR2                       OUT
1                 1 STR1                           VARCHAR2                       IN
1                 2 LEN                            BINARY_INTEGER                 IN
1                 3 PAD                            VARCHAR2                       IN
2                 0                                VARCHAR2                       OUT
2                 1 STR1                           VARCHAR2                       IN
2                 2 LEN                            BINARY_INTEGER                 IN
3                 0                                CLOB                           OUT
3                 1 STR1                           CLOB                           IN
3                 2 LEN                            NUMBER                         IN
3                 3 PAD                            CLOB                           IN
4                 0                                CLOB                           OUT
4                 1 STR1                           CLOB                           IN
4                 2 LEN                            NUMBER                         INI wonder what happened?

ORA-00604 ORA-00904 When query partitioned table with partitioned indexes

Got ORA-00604 ORA-00904 When query partitioned table with partitioned indexes in the data warehouse environment.
Query runs fine when query the partitioned table without partitioned indexes.
Here is the query.
SELECT al2.vdc_name, al7.model_series_name, COUNT (DISTINCT (al1.vin)),
al27.accessory_code
FROM vlc.veh_vdc_accessorization_fact al1,
vlc.vdc_dim al2,
vlc.model_attribute_dim al7,
vlc.ppo_list_dim al18,
vlc.ppo_list_indiv_type_dim al23,
vlc.accy_type_dim al27
WHERE ( al2.vdc_id = al1.vdc_location_id
AND al7.model_attribute_id = al1.model_attribute_id
AND al18.mydppolist_id = al1.ppo_list_id
AND al23.mydppolist_id = al18.mydppolist_id
AND al23.mydaccytyp_id = al27.mydaccytyp_id
AND ( al7.model_series_name IN ('SCION TC', 'SCION XA', 'SCION XB')
AND al2.vdc_name IN
('PORT OF BALTIMORE',
'PORT OF JACKSONVILLE - LEXUS',
'PORT OF LONG BEACH',
'PORT OF NEWARK',
'PORT OF PORTLAND'
AND al27.accessory_code IN ('42', '43', '44', '45')
GROUP BY al2.vdc_name, al7.model_series_name, al27.accessory_code

I would recommend that you post this at the following OTN forum:
Database - General
General Database Discussions
and perhaps at:
Oracle Warehouse Builder
Warehouse Builder
The Oracle OLAP forum typically does not cover general data warehousing topics.

Runtime error ora-12703 when running utl_mail

hello,
I call a procedure through push button to use UTL_MAIL.send(..) and I got error ora-12703.
There is no error during compilation.
For your info, I manage to execute the same code on stored procedure using TOAD and I received the email sent using TOAD and telnet from my local.
For info:
Forms developer version:
Forms [32 Bit] Version 10.1.2.0.2 (Production)
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
procedure:
PROCEDURE test_email IS
BEGIN
UTL_MAIL.send (
sender => '[email protected]',
recipients => '[email protected]',
cc => '[email protected]',
bcc => '[email protected]',
subject => 'Test',
MESSAGE => 'Hello World',
mime_type => 'text; charset=us-ascii',
priority => 3
END;
Could anyone please help me on this.
Regards,
Dayang

Hi All,
I tried another function that use utl_smtp to send email.
Again I could recieve email when I execute the function in TOAD but got error ora-12703 when I ran using forms.
When I ran the form, only "debug 1st" apear, then after that it returned error ora-12703.
Function:
FUNCTION SEND_MAIL
(pIssuer IN VARCHAR2,
pReceiver IN VARCHAR2,
pSender IN VARCHAR2,
pSubject IN VARCHAR2,
pMessage IN VARCHAR2) RETURN VARCHAR2 IS
c utl_smtp.connection;
respuesta utl_smtp.reply;
pServer VARCHAR2(50) := '10.0.3.79';
CRLF CHAR(2) := CHR(13) || CHR(10);
BEGIN
message('debug 1st');
-- Abre la conexión al Server de correo
c := utl_smtp.open_connection(pServer);
message('debug2nd');
respuesta := utl_smtp.helo(c, pServer);
-- Inicia el Issuer del correo.
respuesta := utl_smtp.mail(c, pSender);
-- Inicia el Receiver
respuesta := utl_smtp.rcpt(c, pReceiver);
respuesta := utl_smtp.open_data(c);
-- Escribe la cabecera del e-mail
utl_smtp.write_data(c, 'From: ' || pIssuer || CRLF);
utl_smtp.write_data(c, 'To: ' || pReceiver || CRLF);
-- Escribe el Subject
utl_smtp.write_data(c, 'Subject: ' || pSubject || CRLF);
-- Escribe el texto del Message.
utl_smtp.write_data(c, CRLF || pMessage);
utl_smtp.write_data(c, CRLF || '.');
respuesta := utl_smtp.close_data(c);
-- Cierra la conexión
respuesta := utl_smtp.quit(c);
RETURN '0';
EXCEPTION
WHEN utl_smtp.transient_error OR utl_smtp.permanent_error THEN
utl_smtp.quit(c);
RETURN sqlerrm;
--raise_application_error(-20000,
-- 'El envío del email ha fallado devolviendo el siguiente error: ' || sqlerrm);
END;
Regards,
Dayang

TS3258 I get error message -42408 when trying to download itunes update 11.0.2 and thus can not upgrade to latest version. What should I do?

I get error message -42408 when trying to download itunes update 11.0.2 and I therefore can not update to that latest version. What can I do?

Hey there davidgor2!
I have found an article that should help you resolve this issue with updating your iTunes. The article can be found here:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
and the specific part of the article you will want to look at first is right here:
"Error 42023" through "Error 42408"
These alerts might occur when trying to authorize iTunes or during launch when iTunes checks for authorization information.
Install the latest iTunes from apple.com/itunes/download/
Remove the SC Info folder.
If that does not resolve the issue, see iTunes: "Error 42408" or "Error 42404" after upgrading to iTunes 9.0.3.
Thanks for using the Apple Support Communities!
Regards,
Braden

Getting error code A12E1 when trying to install CC update -- help! (Mac OS 10.7.5)

Getting error code A12E1 when trying to install CC update -- help! (Mac OS 10.7.5) I have disabled my security software, but that doesn't help. Any ideas?

http://helpx.adobe.com/creative-cloud/kb/a12e1-error-downloading-creative-cloud.html

IPhone says Unknown error has occurred when getting an app or update

IPhone says "Unknown error has occurred" when getting an app or update.
What should I do?

I also have this problem. I am thinking i am going to call customer support about this tomorrow. If i get it fixed i will post on here.

HT201413 itune appear "error occur (21)" when i restore off line update from ios 7.0.4 to 8.1.2

itune appear "error occur (21)" when i restore off line update from ios 7.0.4 to 8.1.2.

Hi Myo Ko Ko Aung,
When iTunes reports this error during the restoration of an iOS device, it typically indicates a conflict with security software.
Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
Resolve iOS update and restore errors
http://support.apple.com/en-us/TS3694
Sincerely,
Allen

MCOD Installation - Error ORA-1403 when accessing table SAPUSER

Hello.
We are in middle of a MCOD installation of 4.7 x 2.00 SR1 with BW 3.1 on Windows 2003/Oracle.
BW 3.1 is up and running, while 4.7 fails on R3loads.
Following are SAP000.log and SAPUSER.log files:
SAP000.log
===============================
D:\usr\sap\D11\SYS\exe\run/R3load.exe: START OF LOG: 20060507193904
D:\usr\sap\D11\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
D:\usr\sap\D11\SYS\exe\run/R3load.exe: version R6.40/V1.4
D:\usr\sap\D11\SYS\exe\run/R3load.exe -dbcodepage 1100 -i D:\Program Files\sapinst_instdir\R3E_472SR1_ABAP_NUC\DB/SAP0000.cmd -l D:\Program Files\sapinst_instdir\R3E_472SR1_ABAP_NUC\DB/SAP0000.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(DB) ERROR: DDL statement failed
(DROP TABLE "REPOLOAD")
DbSlExecute: rc = 103
(SQL error 942)
error message returned by DbSl:
ORA-00942: table or view does not exist
(IMP) INFO: a failed DROP attempt is not necessarily a problem
DbSl Trace: ORA-406 occured when executing SQL statement (parse error offset = 0)
(DB) ERROR: DDL statement failed
(CREATE TABLE "REPOLOAD" ( "PROGNAME" VARCHAR2(40) DEFAULT ' ' NOT NULL , "R3STATE" VARCHAR2(1) DEFAULT ' ' NOT NULL , "MACH" NUMBER(5) DEFAULT 0 NOT NULL , "UNAM" VARCHAR2(12) DEFAULT ' ' NOT NULL , "UDAT" VARCHAR2(8) DEFAULT '00000000' NOT NULL , "UTIME" VARCHAR2(6) DEFAULT '000000' NOT NULL , "L_DATALG" NUMBER(10) DEFAULT 0 NOT NULL , "Q_DATALG" NUMBER(10) DEFAULT 0 NOT NULL , "SDAT" VARCHAR2(8) DEFAULT '00000000' NOT NULL , "STIME" VARCHAR2(6) DEFAULT '000000' NOT NULL , "MINOR_VERS" NUMBER(5) DEFAULT 0 NOT NULL , "MAJOR_VERS" NUMBER(10) DEFAULT 0 NOT NULL , "LDATA" BLOB , "QDATA" BLOB ) TABLESPACE PSAPD11620 STORAGE (INITIAL 0000000016K NEXT 0000040960K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
DbSlExecute: rc = 99
(SQL error 406)
error message returned by DbSl:
ORA-00406: COMPATIBLE parameter needs to be 9.2.0.0.0 or greater
(DB) INFO: disconnected from DB
D:\usr\sap\D11\SYS\exe\run/R3load.exe: job finished with 1 error(s)
D:\usr\sap\D11\SYS\exe\run/R3load.exe: END OF LOG: 20060507193905
========================================
SAPUSER.log
==============================
D:\usr\sap\D11\SYS\exe\run/R3load.exe: START OF LOG: 20060507193834
D:\usr\sap\D11\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
D:\usr\sap\D11\SYS\exe\run/R3load.exe: version R6.40/V1.4
D:\usr\sap\D11\SYS\exe\run/R3load.exe -dbcodepage 1100 -i D:\Program Files\sapinst_instdir\R3E_472SR1_ABAP_NUC\DB/SAPUSER.cmd -l D:\Program Files\sapinst_instdir\R3E_472SR1_ABAP_NUC\DB/SAPUSER.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(DB) INFO: disconnected from DB
D:\usr\sap\D11\SYS\exe\run/R3load.exe: job completed
D:\usr\sap\D11\SYS\exe\run/R3load.exe: END OF LOG: 20060507193835
==============================================
Kindly look into it.
Thanks
KT

Hi KT,
Actually the problem is not ORA-1403, but the ORA-00406: COMPATIBLE parameter needs to be 9.2.0.0.0 or greater.
Please update the COMPATIBLE parameter in your init<SID>.ora file and restart the database. This should fix your problem.
Kind regards,
Alexander Webster
P.S. points are appreciated if my reply was helpfull.
Message was edited by: Alexander Webster
Removed typo

Autonomous Transactions & error ORA-01002

Either there's a bug w/ Autonomous Transactions or the documentation is incomplete because the AT is not working when
called from within Cursor Loop.
here's the outline:
CURSOR acct_cur IS ...FOR UPDATE OF a.account_nm...
FOR acct_rec IN acct_cur LOOP
fis_rte_util.print_msg (...) ---autonomous transaction writes to a logging table
---w/ commit
UPDATE ca_account_t
SET account_nm = acct_rec.account_nm....
this update statement causes a ORA-01002: fetch out of sequence exception. if
i comment out the print_msg line it works just fine. its as if the commit in the
AT is causing the problem. according to the documention, there should be no
interference between these 2 blocks.
thanks for any info or insight,
swg
null

Tim,
Refer to the following:
ORA-01002: fetch out of sequence
Cause: This error means that a fetch has been attempted from a cursor which is no longer valid.
Note that a PL/SQL cursor loop implicitly does fetches, and thus may also cause this error. There are a number of possible causes for this error, including:
1) Fetching from a cursor after the last row has been retrieved and the ORA-1403 error returned.
2) If the cursor has been opened with the FOR UPDATE clause, fetching after a COMMIT has been issued will return the error.
3) Rebinding any placeholders in the SQL statement, then issuing a fetch before reexecuting the statement.
Action:
1) Do not issue a fetch statement after the last row has been retrieved - there are no more rows to fetch.
2) Do not issue a COMMIT inside a fetch loop for a cursor that has been opened FOR UPDATE.
3) Reexecute the statement after rebinding, then attempt to fetch again.
HTH,
Thierry
Edited by: Thierry H. on May 4, 2011 12:30 PM Reformatting

Why I got error ORA-02429 when I tried to drop a tablespace?

I use the following command to drop the tablespace:
drop tablespace users including contents and datafiles;The error message is below:
Error report:
SQL Error: ORA-00604: error occurred at recursive SQL level 1
ORA-02429: cannot drop index used for enforcement of unique/primary key
00604. 00000 - "error occurred at recursive SQL level %s"
*Cause: An error occurred while processing a recursive SQL statement
 (a statement applying to internal dictionary tables).
*Action: If the situation described in the next error on the stack
 can be corrected, do so; otherwise contact Oracle Support.However, I have removed all the tables and indexes in this tablespace.
Nothing found when I issued the following enquiries.
select index_name from user_indexes where TABLESPACE_NAME = 'USERS';
select table_name from user_tables where TABLESPACE_NAME = 'USERS';Is there anything I missed?
Thanks in advance.

999274 wrote:
Could you please let me know how to purge recyclebin ?It's bad form to hijack someone else's thread for your own questions.
As for your question
=================================================
Learning how to look things up in the documentation is time well spent investing in your career. To that end, you should drop everything else you are doing and do the following:
Go to [url tahiti.oracle.com]tahiti.oracle.com.
Locate the link for your Oracle product and version, and click on it.
You are now at the entire documentation set for your selected Oracle product and version.
BOOKMARK THAT LOCATION
Spend a few minutes just getting familiar with what is available here. Take special note of the "books" and "search" tabs. Under the "books" tab (for 10.x) or the "Master Book List" link (for 11.x) you will find the complete documentation library.
Spend a few minutes just getting familiar with what kind of documentation is available there by simply browsing the titles under the "Books" tab.
Open the Reference Manual and spend a few minutes looking through the table of contents to get familiar with what kind of information is available there.
Do the same with the SQL Reference Manual.
Do the same with the Utilities manual.
You don't have to read the above in depth. They are reference manuals. Just get familiar with what is there to be referenced. Ninety percent of the questions asked on this forum can be answered in less than 5 minutes by simply searching one of the above manuals.
Then set yourself a plan to dig deeper.
- Read a chapter a day from the Concepts Manual.
- Take a look in your alert log. One of the first things listed at startup is the initialization parms with non-default values. Read up on each one of them (listed in your alert log) in the Reference Manual.
- Take a look at your listener.ora, tnsnames.ora, and sqlnet.ora files. Go to the Network Administrators manual and read up on everything you see in those files.
- When you have finished reading the Concepts Manual, do it again.
Give a man a fish and he eats for a day. Teach a man to fish and he eats for a lifetime.
=================================

ERROR (ORA-01002) when Ioading a table by UPDATE/INSERT

Similar Messages

Maybe you are looking for