Error ORA-22992, what to do?

I created database link to another oracle db (same version: 9.2). Now I want to create view for a table with BLOB.
"create or replace view persons as select * from persons@serv2"
What can I do?

http://asktom.oracle.com/pls/ask/f?p=4950:8:9407757796067305436::NO::F4950_P8_DISPLAYID,F4950_P8_CRITERIA:5322964030684
ORA-22992 cannot use LOB locators selected from remote tables
Cause: A remote LOB column cannot be referenced.
Action: Remove references to LOBs in remote tables.

Similar Messages

Creating view containing case statements received error ORA-22992

We have a create view referencing table through dblink. The select statement in the create view has case statements, when running the Select statement alone, results are return. However, when executing the create view, it returns:
SQL Error: ORA-22992: cannot use LOB locators selected from remote tables
22992. 00000 - "cannot use LOB locators selected from remote tables"
*Cause: A remote LOB column cannot be referenced.
*Action: Remove references to LOBs in remote tables.
One of the source table has LOB column but not in the select statement. The strange thing is when removing the case statement from the select, create view works fine. Can anybody tell me what caused the error and how to fix it?
Create View Snippet:
CREATE OR REPLACE VIEW "ABC"."XYZ" (....
AS SELECT
CASE
WHEN A.OUTAGE =1
THEN 'Y'
ELSE 'N'
END AS OUTAGE,
FROM
TABLEA@XXXX A
LEFT JOIN TABLEB@XXXX B
ON
A.LOC =B.LO
AND A.SITE =B.SITE
WHERE
A.CLASS ='CUSTOMER'
AND A.PLUSSISGIS =1;

What is your 4 digit Oracle version?
Try rewriting the query to not use ANSI SQL92 joins. I found a link where this solved a problem similar to yours.
DBLink problem ORA-22992
>
But, look at this curious thing: I re-write the query as follows:
SELECT A.ID, A.ID_REF, A.EVENDATE, B.DESCRIPTION
FROM A@ORCL A, B@ORCL B
WHERE A.ID_REF = B.ID_REF;
and it works fine... It seems like Oracle don't like the ANSI SQL92...
>
Several similar links by googling: 'SQL Error: ORA-22992'
http://www.dbuggr.com/smallwei/solution-error-ora-22992-lob-locators-selected-remote-tabl/
>
Fixing ORA-22992 “cannot use LOB locators selected from remote tables” error
You have migrated your Oracle 9i database to 10g and a distributed statement which worked fine in 9i now is getting error ORA-22992 “cannot use LOB locators selected from remote tables”. Even though the related remote table(s) does not contain any LOB column datatype.
FIX:
There is a bug on 9i,10g, and 11g that is related to this error. It is being fixed in 11.2. It can also be backported for previous 9i, 10g and 11g releases under the latest patchsets.
You may also do a workaround as follow:
Modify the affected SQL by adding the TO_CHAR function. For example:
-- Original SQL:
SELECT NVL2('a', 'b','c' ) FROM dual@remote_db;
-- Modified SQL:
SELECT TO_CHAR(NVL2('a','b','c')) FROM dual@remote_db;
>
See if that helps.

Materialized view fast refresh ...getting ORA-22992: error

Hi All,
Oracle version 11.1.0.7
While creating a materialized view(Fast refresh) on remote tables ... i am getting the ORA-22992: cannot use LOB locators selected from remote tables ... error.
but the actual scenario is... i am not selecting any of the BLOB/LOB columns from the remote tables. I did n't include them in my materialized query.
I am able to refresh it complete but couldn't refresh it fast. Here i want to mention other thing... when ever i have records in Mat view log(Base table has a blob cloumns in it)
i am getting the above error. when no record in the Mat view log(i.e on BLOB base table) .. i can able to refresh it as FAST.
MV_CAPABILITIES table tells that ...My Mat view is able to refresh it FAST.I don't know howw to approach to solve this issue.could some one tell me the approach..to solve it?
Here is the sample code ....this is what i have done so fat
session 1 (REMOTE_ONE)
I have created synonyms for the remote tables on current schema. That's why i didn't include @DBLINK.
create table RT_A ( col1_A varchar2(20), col2_A BLOB,COL3_A NUMBER);
create a table RT_B (COl1_B varchar2(20), col2_B BLOB, COL3_B NUMBER);
create a table RT_C (COL1_C varchar2(20), col2_C VARCHAR2,COL3_C NUMBER);
create MATERIALIZED VIEW LOG ON RT_A
WITH ROWID EXCLUDING NEW VALUES;
create MATERIALIZED VIEW LOG ON RT_B
WITH ROWID EXCLUDING NEW VALUES;
create MATERIALIZED VIEW LOG ON RT_C
WITH ROWID EXCLUDING NEW VALUES;
grant select on RT_A to CUURRENT_ONE with grant option;
grant select on RT_B to CUURRENT_ONE with grant option;
grant select on RT_C to CUURRENT_ONE with grant option;
grant select on MLOG$_RT_A to CUURRENT_ONE with grant option;
grant select on MLOG$_RT_B to CUURRENT_ONE with grant option;
grant select on MLOG$_RT_C to CUURRENT_ONE with grant option;Session 2 (CUURRENT_ONE)
create materialized view ABC_MV
BUILD IMMEDIATE REFRESH FORCE ON DEMAND START WITH SYSDATE NEXT SYSDATE+1
AS
select A.ROWID AS A_ROWID,
B.ROWID as B_ROWID,
C.ROWID AS C_ROWID,
A.COL1_A,
B.col1_B,
c.col1_c
from RT_A, RT_B,RT_C
where COL3_A = COL3_B(+)
and COL3_B = COL3_C(+)Appreciate your help.
Thanks,
Mike

Thanks for the reply
In that he/she is selecting the LOB column from the remote database(master site).
I am just referencing the table which has BLOB column in it.I am not referencing any LOB column in my select(Mat view) query...
is there anything i need to check..?
Regards,
Mike

What are the "Shared Cursor (KKS) errors" = ORA-44201 - 44300

Hi,
Does anybody know what are the "Shared Cursor (KKS) errors" supposed to raise Oracle errors ORA-44201 till 44300?
I am currently facing an 'ORA-44201: cursor needs to be reparsed' using Oracle DB EE 10.2.0.3!
The 11g documentation is mentioning: "Action: Investigate possible causes of resource contention."
Many Thanks in advance,
Sébastien
Brussels, Belgium

Hi Rob,
For sure, the error message generated by our 10.2.0.3 db is ORA-44201: cursor needs to be reparsed.
I have posted a thread in Database - General:
The environment: OS: Solaris 10 / DB: 10.2.0.3 / OWB: 10.2.0.2 / Workflow: 2.6.4
I am facing this ORA-44201 when calling a function developed to create a materialized view on a prebuilt table:
FUNCTION mv_create (p_mv_name IN VARCHAR2)
RETURN NUMBER
IS
v_query VARCHAR2 (4000);
v_active NUMBER;
BEGIN
SELECT mv_query, mv_active
INTO v_query, v_active
FROM mtd_materialized_view
WHERE mv_name = p_mv_name;
IF (v_active = 1)
THEN
EXECUTE IMMEDIATE 'CREATE MATERIALIZED VIEW '
|| p_mv_name
|| ' '
|| 'ON PREBUILT TABLE '
|| 'WITH REDUCED PRECISION '
|| 'ENABLE QUERY REWRITE AS '
|| v_query;
END IF;
RETURN 1;
EXCEPTION
WHEN NO_DATA_FOUND
THEN
raise_application_error (-20250,
'Create materialized view '
|| p_mv_name
|| ' failed: not found in metadata'
RETURN 3;
WHEN OTHERS
THEN
raise_application_error (-20251,
'Create materialized view '
|| p_mv_name
|| ' failed unexpectedly: '
|| SQLERRM
RETURN 3;
END mv_create;
-- End of mv_create function
The error message:
ORA-20251: Create materialized view MV_IA_COMN_MTLY failed unexpectedly:
ORA-44201: cursor needs to be reparsed
ORA-06512: at "CIS_DWH_FCT.CIS_L_FCT_XCH", line 507
ORA-06512: at line 1
I am totally blocked and need your help!!!
Many Thanks in advance,
Sébastien
Brussels, Belgium

ORA-06550 - What is this error.

Hi,
I'm new to Oracle. Can anyone explain what
the error is.
Thanks,
AO.

Thanks R,
I should have asked about PLS-00905 error.
Found what's causing - it's acutally in
PL/SQL block where the database is
referred with a period like - namespace.db1 -
Once again thanks for letting me know how to
use the Find.
AO
<BLOCKQUOTE><font size="1" face="Verdana, Arial, Helvetica">quote:</font><HR>Originally posted by Rachel:
ORA-06550 line string, column string:string
Cause: A PL/SQL compilation error has occurred. The numbers given for line and column are the location in the PL/SQL block where the error occurred.
Action: Refer to the following PL/SQL messages for more information about the error.
For more information type the ORA-error number in the find box in the upper right corner. This is very helpful for finding meaning to errors oracle gives.
R<HR></BLOCKQUOTE>
null

PL/SQL: ORA-22992: cannot use LOB locators selected from remote tables

Dear ALL,
My O/S is Redhatlinux 5.2 and i had Migrated my Oracle databse to 11g2. But after that while i am retrieving records through dblinks from one of my other Oracle 9.2.0.8 databse it's throwing the error : PL/SQL: ORA-22992: cannot use LOB locators selected from remote tables.* This error i am getting in TOAD as well as SQL Developer.
Can anybody tell me how to fix this error ? Because am not able to get the records.
Also am getting another error during retrieving data from some of my tables after migrating i.e the table which having CLOB data type while am accessing to retrieve the records using select query it's throwing the error :
+(The following error has occurred:+
A query with LOB's requires OCI8 mode, but OCI7 mode is used.)
If anyone having any idea kindly share.
Thanks and Regards
Biswa

Hi,
Ya what u sent that is fine. But already am using one procudure which is accessing LOB data from another databse through DBlink and working fine. But there Both the databse are 9.2.0.8.
But while am executing the same procedure in oracle 11g where the Dblink accessing the data from Oracle 9i , there am getting this error.
Kindly tell if u know any resolution.
Thanks

Unable to add external data source in BAM : Error ORA-12505

Hi,
In BAM,
Im trying to add an external data source for creating a data object.
But when i try to test the connection i get the following error:
Listener refused the connection with the following error: ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
Source: "java.sql.SQLException: Listener refused the connection with the following error: ORA-12505, TNS:listener does not currently know of SID given in connect descriptor "
Listener refused the connection with the following error: ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
Source: "oracle.net.ns.NetException: Listener refused the connection with the following error: ORA-12505, TNS:listener does not currently know of SID given in connect descriptor "
As mentioned in another post ((Listener does not currently know of SID given in connection descriptor
i tried
lsnrctl stop.
delete listener.ora
lsnrctl start
lsnrctl reload
But still get the same error;
Im able to access the database with the specified username and password using sqlplus.
Your help will be appreciated.
Regards
Vignesh Ramanathan

For #5, not Windows, ConfigMgr 2012 R2. Anything before ConfigMgr 2012 R2 is not supported for the 8.1 ADK.
For the permissions, what accounts are you setting this for. In general, if the share is on the same server, Everyone Full or Read on the Share and System Full or Read on the NTFS should work.
For the error message, it looks like you are trying to import an OS Image and not an OS Install Package. OS images use a WIM file and OS Install Packages use the entire set of source files from the media. For OS images, you must thus explicitly point it
to a specific WIM file.
Jason | http://blog.configmgrftw.com

Error ORA-12560 prompts when trying to log in to the Enterprise Manager

Hi all,
I am a newbie to Oracle.
Just installed the Oracle 9i Database Enterprise Edition (9.0.1) into Windows Server 2003 Standard Edition. Problem is encountered when trying to log in to the Enterprise Manager Standalone mode using either system/oracle or scott/tiger as credentials. Error "ORA-12560: TNS:protocol adapter error" prompts.
I tried to check with some configuration and see whether the services are started. Services of "OracleOraHome90TNSListener" and "OracleServiceORCL" have been started and the database exists in the dedicated directory. Environment variables of "ORACLE_HOME" and "ORACLE_SID" have been added manually as the SID is set to orcl, which I just follow what the instruction manual has stated. Moreover, I can't get access using command prompt typing "svrmgrl"; error returned stating " 'svrmgrl' is not recognized as an internal or external command, operable program or batch file."
Another information is that there is no domain set in my server. Just a server with a name being assigned in a workgroup.
Hence, would you mind please advice me what to do in order to get access into the Enterprise Manager? It's quite an urgent task.
A million thx in advance!
Best Regards,
Karen

Hi Jigneshrp,
Thanks for your reply.
It is checked that the listener is running and TNS name service exists. Following your advice, I did create a new listener and another name service and use them, but the same error turns out when trying to log in to the Enterprise Manager again.
Additional information to take note for is that while reconfiguring the existing listener or creating a new listener, a mesage prompts stating "The information provided for this listener is currently in use by other software on this computer. You can proceed with the configuration as it is, but it will not be possible to start this listener until the conflict is resolved. Would you like to continue with the continue with the configuration anyway? Yes/No".
As for the reconfiguration or the new creation of TNS names service, when I am trying to test for the connection, the results in the details pane states that "Connecting... ORA-12560: TNS:protocol adapter error. The test did not succeed...."
Would you mind pls advice me on these?
Furthermore, there exist 2 questions I am wondering is that it is stated in the instruction manual that prior to the installation, a static IP should be specified for it instead of the DHCP one; hence, I wanna ask after the complete insallation, is it that the server should be running in the network, i.e. allow it to get connected with the outside network?
2nd question is that can Oracle 9i Database Server Standard Edition (9.0.1) be installed under a Windows Server 2003 Standard Edition and just a Window XP Professional?
Thanks for your reply.
Best Regards,
Karen

Error ORA-03113: end-of-file on communication channel in droppping a table

Good evening,
I am very new on Oracle and I have a problem with some tables. Without any reason, apparently, I can't drop some of my table. Oracle gives me this error:
ORA-03113: end-of-file on communication channel
and then close the connection of the user.
What I should have to do?
It is very important.
Thanks a lot
best regards
Anna Zanetti

Good morning, I still have the same problem, I can't drop a table from my database.
The message is again:
Re: Error ORA-03113: end-of-file on communication channel
The alert log file says:
Fri Nov 17 12:27:31 2006
Errors in file /usr/oracle/admin/oracledb/udump/oracledb_ora_4369.trc:
ORA-07445: exception encountered: core dump [0955C61F] [SIGSEGV] [Address not mapped to object] [0xC] [] []
and in file oracledb_ora_4369.trc there is:
Exception signal: 11 (SIGSEGV), code: 1 (Address not mapped to object), addr: 0xc, PC: [0x955c61f, 0955C61F]
Registers:
%eax: 0x00000000 %ebx: 0x00012d95 %ecx: 0x58301930
%edx: 0x00000000 %edi: 0x5830d9e8 %esi: 0x00000000
%esp: 0xbfffae1c %ebp: 0xbfffb060 %eip: 0x0955c61f
%efl: 0x00210282
(0x955c61f) movzw 0xc(%eax),%eax(0x955c623) cmp $30,%eax
(0x955c626) jle 0x955c63e
(0x955c628) xor %edx,%edx
(0x955c62a) push %edx
*** 2006-11-17 12:27:31.658
ksedmp: internal or fatal error
ORA-07445: exception encountered: core dump [0955C61F] [SIGSEGV] [Address not mapped to object] [0xC] [] []
Current SQL statement for this session:
drop table fiumiforjoin
----- Call Stack Trace -----
calling call entry argument values in hex
location type point (? means dubious value)
08856247 call 0885776A 1 ? 0 ? 1 ? 1 ? 0 ? 0 ?
08290320 call 0885605A 3 ? 0 ? 0 ? 0 ? 0 ? 0 ?
0955C61F signal 08290320 B ? BFFFAAB0 ? BFFFAB30 ?
0955D6BE call 0955C61F 5830F01C ? 0 ? FFFFFFFF ? 0 ?
1 ? 5830F01C ?
08DD1EEB call 0955CC22 BFFFB394 ? 0 ? 0 ? BFFFB348 ?
58EAB2B0 ? C ?
09434EF3 call 08DD1A28 BF2A8C4 ? BFFFC0C0 ?
BFFFC0C0 ? 4 ? B6AB0300 ?
B6ABC2E0 ?
094106E0 call 094326D4 4 ? 0 ? BFFFC0C0 ?
093D7BB5 call 0940FEF8 3 ? E ? BFFFC1F8 ? A4 ?
093D630C call 093D7AC4 BFFFCDF0 ? BFFFCD08 ? 17 ?
1 ? 0 ? A4 ?
08293DE6 call 0850FFFF 5E ? 14 ? BFFFCDEC ?
0A1ED44D call 08293DE6 5E ? 14 ? BFFFCDEC ? 0 ?
08292122 call 0A1ECAE4 BF2A8C0 ? 5E ? BFFFCDEC ? 0 ?
BFFFD6E8 ? BFFFD6E4 ?
0941F190 call 0829193C 0 ? 0 ? BF2A8C0 ? BF83090 ?
F1 ? 0 ?
08293DE6 call 0850FFFF 3C ? 4 ? BFFFEB08 ?
08291238 call 082937A8 3C ? 4 ? BFFFEB08 ? 0 ?
0828F403 call 08291012 3C ? 4 ? BFFFEB08 ?
08274A3D call 0828F39C BFFFEAEC ? 3C ? 4 ?
BFFFEB08 ? B6CC017C ?
B6C1A17C ?
__libc_start_main() call 08274A3D 2 ? BFFFEBA4 ? BFFFEBB0 ? 0 ?
+218 B6C1C898 ? B7600020 ?
Any idea of what I have to do?
Thanks for your help..
Best Regards
Anna Zanetti

Report error: ORA-06502: PL/SQL: numeric or value error: character string b

I have a form which uses a customer form/report, drop downs etc..
the debug shows it running this statement
...Execute Statement: begin begin SELECT distinct initcap(RTRIM (LTRIM (e.surname, ' *0123456789-/:.?,'), ' *0123456789-/:.?,') || ', ' || RTRIM (LTRIM (e.first_name, ' *0123456789-/:.?,'), ' *0123456789-/:.?,' )) empname, e.ID bulk collect into wwv_flow_utilities.g_display,wwv_flow_utilities.g_value FROM dms.dms_employees@dmsprd e, dms.dms_employee_contracts@dmsprd ec WHERE e.ID = ec.emp_id and e.surname like '%%' AND :p75_date BETWEEN ec.start_date AND NVL (ec.end_date, :p75_date) AND e.brh_id = 3654 ORDER BY 1; end; end;
Then says
"report error: ORA-06502: PL/SQL: numeric or value error: character string buffer too small"
Any Ideas?
Thanks
Dean

Denes Kubicek wrote:
A select list is limited in size. I am not sure what the limit is but that is definitelly the case.The maximum size for the HTML generated for a select list is 32K.
86 options sounds on the low side to be hitting that limit, but there are other concerns to this as well. Scrolling through hundreds/thousands of options in a select list is a pain for users, and huge select lists produce bloated pages that impact load times and network bandwidth. That list of around 200 countries you find on many sites is about the sensible maximum length for a select list.
You should use popups.Indeed.

Error : ORA-06508: PL/SQL: could not find program unit being called

Hi
I got surprise issue while testing my Oracle code . Let me explain first the environment detail . Our appliaction built on
Java/J2EE(Weblogic) and backend is Oracle 11g re2 . While calling from java it call thru different user which have been provide
synonym and exectue option for corresponding procdure ,
I created on package EXTRACT_CUSTOMER_INFO_PK which will exract data to text file using UTL_FILE ( direcory , UTL_FILE grant is provided to DB user).
Now this package has been called from rp_execute_procedure_pr -- Here I is the code
CREATE OR REPLACE PROCEDURE RP_EXECUTE_PROCEDURE_PR
i_atlas_job_schedule_fk IN atlas_job_schedule.atlas_job_schedule_pk%TYPE,
i_job_id IN atlas_job.job_id%TYPE,
i_parm_value IN atlas_job_schedule.parm_value%TYPE,
o_status_code OUT NUMBER,
o_status_mesg OUT VARCHAR2
IS
-------Other old code which is not relevent for this issue ----
--------Other old code which is not relevent for this issue ----
----Below code I added ----
ELSIF l_job_id = 'CUST_EXTRACT' THEN
EXTRACT_CUSTOMER_INFO_PK.customer_report ( i_parm_value ,
o_status_code,
o_status_mesg ) ;
-- o_status_code := -99999999;
--o_status_mesg := 'PARTHA PARTHA PARTHAcess terminated!';
ELSE
o_status_code := -20300;
o_status_mesg := 'Job Id : ' || l_job_id || ' NOT found. Process terminated!';
END IF;
update_log_auto
ajs_rec.atlas_job_schedule_pk ,
'Processing End Time (GMT): '
EXCEPTION
WHEN eProcError THEN
o_status_code := SQLCODE;
o_status_mesg := SUBSTR(vMsg ||'-'||SQLERRM, 1, 200);
WHEN OTHERS THEN
o_status_code := -20300;
o_status_mesg := SUBSTR(SQLERRM, 1, 200);
update_log_auto
ajs_rec.atlas_job_schedule_pk ,
'Error : '||SQLERRM||' '
update_log_auto
ajs_rec.atlas_job_schedule_pk,
'Processing End Time (GMT): '
END RP_EXECUTE_PROCEDURE_PR;
Now It compiled sucesfully . And while I did SIT then RP_EXECUTE_PROCEDURE_PR run fine and extracted txt file . But while I called it from Java procedure It gives us error like
Error : ORA-06508: PL/SQL: could not find program unit being called 02-AUG-2012 13:16:51.
As I told RP_EXECUTE_PROCEDURE_PR old proc and used by other proc , So I first suspect issue is newly added code or may be some grant or synonym ( Although it should not be )
so I created public synony amd gave execute grant to my pkg to public .
But it repeat same error .
I did lot of R&D on my pkg but nothing happen . Finally I remane my new pkg RP_EXTRACT_CUSTOMER_INFO_PK and it works fine
I need to know what is the RCA for it . I donot think any dependecy issue as renaming pkg is working fine .
NB my DB user is iATLAS and Javauser is SUDEEP
Thanks in Advance
Debashis Mallick

First of all If i run the main procedure in like below in my Schema it is working fine
begin
-- Call the procedure
rp_execute_procedure_pr(i_atlas_job_schedule_fk => :i_atlas_job_schedule_fk,
i_job_id => :i_job_id,
i_parm_value => :i_parm_value,
o_status_code => :o_status_code,
o_status_mesg => :o_status_mesg);
end;
So thre is no question of parameter .... or Invalid state etc . If it is parameter or Invalid state issue it will give other error.
Here problem is not syntax issue .
let me give u more detail regards this issue
1.. All objects corresponding to procedure all Valid
2.. If I test on the proc on my schema like above code . It works fine
3.rp_execute_procedure_pr is a old procudere which called for differner report generartion based on parameter passing . Also as extract_customer_info_pk called with in rp_execute_procedure_pr So there is no question of synonym or privilage issue for new procedure.
4. Suprising thing is if I rename and recreate package like extract_customer_info_pk _1 or rp_extract_customer_info_pk . Which are exactly same as extract_customer_info_pk and replace those new one with extract_customer_info_pk then it work fine in my java application
I think I make it clear the issue
Edited by: debashisora on Aug 3, 2012 5:31 AM
Edited by: debashisora on Aug 3, 2012 5:40 AM

IR Report Search - ORA-20001: get_dbms_sql_cursor error ORA-00936: missing expression

Hi All,
I had created a IR report based on a table and it was working with no issues. But after few days, when I try searching using the IR search bar it shows "ORA-20001: get_dbms_sql_cursor error ORA-00936: missing expression" error message. I don't see any debug messages or errors in the debug window. The Finder drop down is empty too, there are no columns displayed to filter.
When I recreate the IR report(new page) based on the same table, It works fine and there are no issues with the search. But the old IR report search doesnt work. I have not modified the any thing in the old report after initial creation. Report uses Primary key based on a sequence.
What might have caused this issue?
Is there a way to intercept the search query from IR report?
Apex version - 4.2.3.00.08.
Any help on this appreciated.
Thanks,
Jagan

Hi MK, as I had mentioned in my post, I don't see any logs in the debug window, query tab.
Can you please guide me how to check the query logs on search?
Thanks,
Jagan

Error: ORA-16778: redo transport error for one or more databases

Hi all
I have 2 database servers"Primary database and physical standby" in test environment( before going to Production)
Before Dataguard broker configuration , DG setup was running fine , redo was being applied and archived on phy standby.
but while enabling configuration i got "Warning: ORA-16607: one or more databases have failed" listener.ora & tnsnames.ora are updated with global_name_DGMGRL
Please help me how can i resolve this issue .Thanks in advance.
[oracle@PRIM ~]$ dgmgrl
DGMGRL for Linux: Version 10.2.0.1.0 - Production
Copyright (c) 2000, 2005, Oracle. All rights reserved.
Welcome to DGMGRL, type "help" for information.
DGMGRL> connect sys
Password:
Connected.
DGMGRL> show configuration
Configuration
Name: test
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
prim - Primary database
stan - Physical standby database
Current status for "test":
Warning: ORA-16607: one or more databases have failed
DGMGRL> show database
show database
^
Syntax error before or at "end-of-line"
DGMGRL> remove configuration
Warning: ORA-16620: one or more databases could not be contacted for a delete operation
Removed configuration
DGMGRL> exit
[oracle@PRIM ~]$ connect sys/sys@prim as sysdba
bash: connect: command not found
[oracle@PRIM ~]$ lsnrctl stop
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:52:30
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
The command completed successfully
[oracle@PRIM ~]$ lsnrctl start
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:52:48
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 08-OCT-2006 19:52:48
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PRIM_DGMGRLL" has 1 instance(s).
Instance "PRIM", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
[oracle@PRIM ~]$ lsnrctl stop
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:54:46
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
The command completed successfully
[oracle@PRIM ~]$ lsnrctl start
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:54:59
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
[oracle@PRIM ~]$ dgmgrl
DGMGRL for Linux: Version 10.2.0.1.0 - Production
Copyright (c) 2000, 2005, Oracle. All rights reserved.
Welcome to DGMGRL, type "help" for information.
DGMGRL> connect /
Connected.
DGMGRL> create configuration test as
primary database is PRIM
connect identifier is PRIM
;Configuration "test" created with primary database "prim"
DGMGRL> add database STAN as
connect identifier is STAN
maintained as physical;Database "stan" added
DGMGRL> show configuration
Configuration
Name: test
Enabled: NO
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
prim - Primary database
stan - Physical standby database
Current status for "test":
DISABLED
DGMGRL> enable configuration
Enabled.
DGMGRL> show configuration
Configuration
Name: test
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
prim - Primary database
stan - Physical standby database
Current status for "test":
Warning: ORA-16607: one or more databases have failed
DGMGRL> show database verbose prim
Database
Name: prim
Role: PRIMARY
Enabled: YES
Intended State: ONLINE
Instance(s):
PRIM
Properties:
InitialConnectIdentifier = 'prim'
LogXptMode = 'ASYNC'
Dependency = ''
DelayMins = '0'
Binding = 'OPTIONAL'
MaxFailure = '0'
MaxConnections = '1'
ReopenSecs = '300'
NetTimeout = '180'
LogShipping = 'ON'
PreferredApplyInstance = ''
ApplyInstanceTimeout = '0'
ApplyParallel = 'AUTO'
StandbyFileManagement = 'AUTO'
ArchiveLagTarget = '0'
LogArchiveMaxProcesses = '30'
LogArchiveMinSucceedDest = '1'
DbFileNameConvert = '/u01/app/oracle/oradata/STAN, /u01/app/oracle/oradata/PRIM'
LogFileNameConvert = '/u01/app/oracle/oradata/STAN, /u01/app/oracle/oradata/PRIM'
FastStartFailoverTarget = ''
StatusReport = '(monitor)'
InconsistentProperties = '(monitor)'
InconsistentLogXptProps = '(monitor)'
SendQEntries = '(monitor)'
LogXptStatus = '(monitor)'
RecvQEntries = '(monitor)'
HostName = 'PRIM'
SidName = 'PRIM'
LocalListenerAddress = '(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521))'
StandbyArchiveLocation = '/u01/app/oracle/flash_recovery_area/PRIM/archivelog/'
AlternateLocation = ''
LogArchiveTrace = '0'
LogArchiveFormat = '%t_%s_%r.arc'
LatestLog = '(monitor)'
TopWaitEvents = '(monitor)'
Current status for "prim":
Error: ORA-16778: redo transport error for one or more databases
DGMGRL> show database verbose stan
Database
Name: stan
Role: PHYSICAL STANDBY
Enabled: YES
Intended State: ONLINE
Instance(s):
STAN
Properties:
InitialConnectIdentifier = 'stan'
LogXptMode = 'ASYNC'
Dependency = ''
DelayMins = '0'
Binding = 'OPTIONAL'
MaxFailure = '0'
MaxConnections = '1'
ReopenSecs = '300'
NetTimeout = '180'
LogShipping = 'ON'
PreferredApplyInstance = ''
ApplyInstanceTimeout = '0'
ApplyParallel = 'AUTO'
StandbyFileManagement = 'AUTO'
ArchiveLagTarget = '0'
LogArchiveMaxProcesses = '30'
LogArchiveMinSucceedDest = '1'
DbFileNameConvert = '/u01/app/oracle/oradata/PRIM, /u01/app/oracle/oradata/STAN'
LogFileNameConvert = '/u01/app/oracle/oradata/PRIM, /u01/app/oracle/oradata/STAN'
FastStartFailoverTarget = ''
StatusReport = '(monitor)'
InconsistentProperties = '(monitor)'
InconsistentLogXptProps = '(monitor)'
SendQEntries = '(monitor)'
LogXptStatus = '(monitor)'
RecvQEntries = '(monitor)'
HostName = 'STAND'
SidName = 'STAN'
LocalListenerAddress = '(ADDRESS=(PROTOCOL=tcp)(HOST=STAND)(PORT=1521))'
StandbyArchiveLocation = '/u01/app/oracle/flash_recovery_area/STAN/archivelog/'
AlternateLocation = ''
LogArchiveTrace = '0'
LogArchiveFormat = '%t_%s_%r.arc'
LatestLog = '(monitor)'
TopWaitEvents = '(monitor)'
Current status for "stan":
Error: ORA-12545: Connect failed because target host or object does not exist
DGMGRL>

This:
Current status for "stan":
Error: ORA-12545: Connect failed because target host or object does not exist
says that your network setup is not correct. You need to resolve that first.
As for Broker setup steps how about the doc or our Data Guard 11g Handbook?
It's 3 DGMGRL commands so I am not sure what 'steps' you need?
Larry

SQL Error: ORA-12899: value too large for column

Hi,
I'm trying to understand the above error. It occurs when we are migrating data from one oracle database to another:
Error report:
SQL Error: ORA-12899: value too large for column "USER_XYZ"."TAB_XYZ"."COL_XYZ" (actual: 10, maximum: 8)
12899. 00000 - "value too large for column %s (actual: %s, maximum: %s)"
*Cause:    An attempt was made to insert or update a column with a value
which is too wide for the width of the destination column.
The name of the column is given, along with the actual width
of the value, and the maximum allowed width of the column.
Note that widths are reported in characters if character length
semantics are in effect for the column, otherwise widths are
reported in bytes.
*Action:   Examine the SQL statement for correctness. Check source
and destination column data types.
Either make the destination column wider, or use a subset
of the source column (i.e. use substring).
The source database runs - Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
The target database runs - Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
The source and target table are identical and the column definitions are exactly the same. The column we get the error on is of CHAR(8). To migrate the data we use either a dblink or oracle datapump, both result in the same error. The data in the column is a fixed length string of 8 characters.
To resolve the error the column "COL_XYZ" gets widened by:
alter table TAB_XYZ modify (COL_XYZ varchar2(10));
-alter table TAB_XYZ succeeded.
We now move the data from the source into the target table without problem and then run:
select max(length(COL_XYZ)) from TAB_XYZ;
-8
So the maximal string length for this column is 8 characters. To reduce the column width back to its original 8, we then run:
alter table TAB_XYZ modify (COL_XYZ varchar2(8));
-Error report:
SQL Error: ORA-01441: cannot decrease column length because some value is too big
01441. 00000 - "cannot decrease column length because some value is too big"
*Cause:
*Action:
So we leave the column width at 10, but the curious thing is - once we have the data in the target table, we can then truncate the same table at source (ie. get rid of all the data) and move the data back in the original table (with COL_XYZ set at CHAR(8)) - without any issue.
My guess the error has something to do with the storage on the target database, but I would like to understand why. If anybody has an idea or suggestion what to look for - much appreciated.
Cheers.

843217 wrote:
Note that widths are reported in characters if character length
semantics are in effect for the column, otherwise widths are
reported in bytes.You are looking at character lengths vs byte lengths.
The data in the column is a fixed length string of 8 characters.
select max(length(COL_XYZ)) from TAB_XYZ;
-8
So the maximal string length for this column is 8 characters. To reduce the column width back to its original 8, we then run:
alter table TAB_XYZ modify (COL_XYZ varchar2(8));varchar2(8 byte) or varchar2(8 char)?
Use SQL Reference for datatype specification, length function, etc.
For more info, reference {forum:id=50} forum on the topic. And of course, the Globalization support guide.

Error (ORA-01403) saveing data form a report with apex_item items

Hi all,
I've a problem saveing data that's inserted into a report which I created using apex_item items. Reproducing the exact issue on apex.oracle.com will take me a lot of time, and I don't know if I really can reproduce this matter... So I hope I can explain my problem clearly enough, here...
The global story of the application is that its an application used for measureing objects. For these objects there are templates, with default properties. When measureing an object, the user must fill in those properties for the object. The report is build dynamicly, becouse each object has different properties and each property could be of an other kind (number, text, list, counter [=number field with add and substract buttons], and date). Depending on the type of the property, the report has to show an other item to fill.
The query for constructing this report is like this:
select defprop.proptyp_id,
apex_item.hidden(41,defprop.id) defprop_id,
defprop.nam,
decode(proptyp.id,
                1, apex_item.text(p_idx=>42,p_value=>''||
                    decode(defprop.srt, 'CONSTANT', (select WRD
                                                                        from    measurement_prop
                                                                        where    defprop_ID = defprop.id
                                                                        AND        measurement_id IN
                                                                            (SELECT ID
                                                                            FROM measurement
                                                                            WHERE OBJ_ID = obj.id
                                                                            AND DAT IN
                                                                                (SELECT latest_date
                                                                                from object_instance
                                                                                WHERE ID = obj.id)))
                 ||'' ,p_attributes=>'class=case5_num'),
                2, apex_item.text(p_idx=>42,p_value=>''||
                    decode(defprop.srt, 'CONSTANT', (select WRD
                                                                        from    measurement_prop
                                                                        where    defprop_ID = defprop.id
                                                                        AND        measurement_id IN
                                                                            (SELECT ID
                                                                            FROM measurement
                                                                            WHERE OBJ_ID = obj.id
                                                                            AND DAT IN
                                                                                (SELECT latest_date
                                                                                from object_instance
                                                                                WHERE ID = obj.id)))
                 ||''),
                3, apex_item.select_list_from_query(p_idx=>42,p_value=>''||
                    decode(defprop.srt, 'CONSTANT', (select WRD
                                                                        from    measurement_prop
                                                                        where    defprop_ID = defprop.id
                                                                        AND        measurement_id IN
                                                                            (SELECT ID
                                                                            FROM measurement
                                                                            WHERE OBJ_ID = obj.id
                                                                            AND DAT IN
                                                                                (SELECT latest_date
                                                                                from object_instance
                                                                                WHERE ID = obj.id)))
                 ||'', p_query=> 'select wrd, id from property_typewrd where proptyp_id = ' || proptyp.id ||' order by vlgnum', p_show_null=> 'NO'),
                4, apex_item.text(p_idx=>42,p_value=>''||
                    decode(defprop.srt, 'CONSTANT', (select WRD
                                                                        from    measurement_prop
                                                                        where    defprop_ID = defprop.id
                                                                        AND        measurement_id IN
                                                                            (SELECT ID
                                                                            FROM measurement
                                                                            WHERE OBJ_ID = obj.id
                                                                            AND DAT IN
                                                                                (SELECT latest_date
                                                                                from object_instance
                                                                                WHERE ID = obj.id)))
                 ||'',p_attributes=>'class=case5_num')
                || '<a name="add_f02" href="#"><img alt="add" src="#WORKSPACE_IMAGES#plusBig.gif"/></a>    '
                || '<a name="sub_f02" href="#"><img alt="sub" src="#WORKSPACE_IMAGES#minusBig.gif"/></a>',
                5, apex_item.date_popup(p_idx=>42, p_value=>''||
                    decode(defprop.srt, 'CONSTANT', (select WRD
                                                                        from    measurement_prop
                                                                        where    defprop_ID = defprop.id
                                                                        AND        measurement_id IN
                                                                            (SELECT ID
                                                                            FROM measurement
                                                                            WHERE OBJ_ID = obj.id
                                                                            AND DAT IN
                                                                                (SELECT latest_date
                                                                                from object_instance
                                                                                WHERE ID = obj.id)))
                 ||''),
                oms
            ) waarde
from default_property defprop,
object_instance obj,
property_type proptyp
where defprop.stdobjver_id = obj.stdobjver_id
and defprop.proptyp_id = proptyp.id
and obj.id = :P2200_ID_INVThis report works fine. Depending on the type of the property it shows a numberic field, text field, selectlist (with right values), counter field or date field.
If the default property is set to a 'CONSTANT' value, the last known value is filled in.
With a javascript I check the numberic field value and achieve the counterfield to add or substract values when 'plus' or 'minus' is clicked.
This javascript is placed in the field 'Execute when Page Loads' in the page properties in APEX. Here is the code:
/*Execute when page loads*/
/*Allow only numbers */
number_elem = $('input[name=f42].case5_num');
number_elem.keypress(function(event) {
if (event.which && (event.which < 46 || event.which > 57 || event.which == 47) && event.keyCode != 8) {
      event.preventDefault();
if (event.which == 46 && $(this).val().indexOf('.') != -1) {
      event.preventDefault();
//for mouse events, remove any non numeric characters
number_elem.bind('mouseup mousedown mouseleave', function(event) {
   this.value = this.value.replace(/[^0-9]/g, '');
/* Subtract Button */
$('a[name="sub_f42"]').click( function() {
number_elem = $(this).siblings('input[name=f42].case5_num');
currVal = number_elem.val();
if ( isNaN( currVal) ){
   elemVal = 0;
else {
   elemVal = Number(currVal);
if (elemVal > 0)
     number_elem.val(elemVal-1);
else
{ elemVal = 0; }
/* Add Button */
$('a[name="add_f02"]').click( function() {
number_elem = $(this).siblings('input[name=f42].case5_num');
currVal = number_elem.val();
if ( isNaN( currVal) ){
   elemVal = 0;
else {
   elemVal = Number(currVal);
number_elem.val(elemVal+1);
});Those two codes makes my report works fine. So far I'm happy. But now I want the data, which the user fills in the items, to be saved.
So I created a process that should do this for me (it wil run after the user hits a button), here is the code:
declare
     v_objmet_id number := 0;
begin
     select measurment_seq.nextval
     into v_objmet_id
     from dual;
     insert into measurment
     ( id
     , obj_id
     , dat
     values
     ( v_objmet_id
     , :P2200_ID_INV
     , :P2200_METDAT_INV
     /*Loop trough the values (g_f42 holds the value of the property)*/
     for i in 1 .. apex_application.g_f42.count loop
          /*g_f41 holds the key to the default property*/
          if apex_application.g_f41(i) is not null and
               apex_application.g_f41(i) > 0 then
               insert into measurment_prop
               ( measrument_id
               , defprop_id
               , wrd)
               values
               ( v_objmet_id
               , apex_application.g_f41(i)
               , apex_application.g_f42(i)
          end if;
     end loop;
end;After running this process, the application branches back to the page, clearing the cache and set some items I use for filtering an other report with their own values.
Both the process and the branche have a 'when button pressed' condition, where the same button is filled in. The branche fires on submit: after processing.
When I hit the button to save the data, I get an error: ORA-01403: no data found
In the debug info I can find there is encountered an unhandeled exception in the process, but I don't know what's going wrong...
I thought it could be something with the date field, I want to save, so I put it in a to_date() with the right format, but I still got the error...
I've also checked if the query which fetches the nextval of the sequence is correct, and it is, no typeing error in the sequence name, or something.
I'm using APEX 4.0.2
Edited by: Mir on 28-jun-2011 10:25
Changed some code of the javascript, it directed to the wrong item ID, now its correct

My problem is solved. The error occured when application item g_f41 was accessed, so my application couldn't find the data, the user putted in there. I now pasted this part of the sql, to the other apex_item field, so it became one field and now it works correctly:
select [...]
apex_item.hidden(41,defprop.id) ||
decode(proptyp.id,
                1, apex_item.text(p_idx=>42,p_value=>''||
                    decode(defprop.srt, 'CONSTANT', (select WRD
                                                                        from    measurement_prop
                                                                        where    defprop_ID = defprop.id
                                                                        AND        measurement_id IN
                                                                            (SELECT ID
                                                                            FROM measurement
                                                                            WHERE OBJ_ID = obj.id
                                                                            AND DAT IN
                                                                                (SELECT latest_date
                                                                                from object_instance
                                                                                WHERE ID = obj.id)))
[... etc ...]

Error ORA-22992, what to do?

Similar Messages

Maybe you are looking for