Error passing bool/categorical parameter into web service

I am working on publishing a web service to produce a prediction based on a model. One of my parameters is whether or not a given day is a holiday, which was a boolean (TRUE / FALSE) that was calculated during an R script. When I preview the
output of my input data, I see lowercase "true" and "false". When I try to pass this into the web service, I get the following error.
InputParseError: Parsing of input vector failed. Verify the input vector has the correct number of columns and data types. Additional details: Value "bool" is not defined in enum. Line 1, position 2167.., Error code: BadArgument, Http status code:
400, Request id: 338eb834-b195-4a09-b6b2-47a0b91e80f1, Timestamp: Fri, 23 Jan 2015 20:51:09 GMT
I have tried passing in true, 1, TRUE.
Does anyone know how I can successfully pass in a value for this parameter to get the service to execute?
Thanks,
Jeff

Hello Jeff,
This is the error observed in our log:
Code: InputParseError, Target: ClientID,Location,Procedure,Month,DayOfWeek,Holiday, Message: Parsing of
input vector failed. Verify the input vector has the correct number of columns and data types. Additional details: Value "bool" is not defined in enum
You have tried to pass "true"/"TRUE"/1 as input value for "Holiday" right? Do you mind sending us more information to help troubleshoot? I'd like to request 1) your sample R code 2) your sample input. Could you please
send to my email address?
Thanks
Jing

Similar Messages

"Cannot log into Web service" error when tying to use Wifi to connect to Google Drive or Facebook

We have a relatively new Canon Powershot s120. Up until a few days ago, it worked just fine to connect to the Wifi and upload pictures to both Google Drive and Facebook. Now, every time I try to connect, I get a message "Cannot log into Web service"
I have already tried removing Google Drive from the Camera and re-adding it. I went into the Canon Image Gateway website and disconnected and then reconnected the service. That didn't do anything.
Would really appreciate any tips anyone has.
Thanks!

Problem sorted - there is a new set of terms and conditions which came out on the 6th August.
You have to log in under your current user name & password and agree to them and it works again. I spent a frustrating hour doiung this until I found out that this had happened!

Trying to pass xml data to a web service

I'm working on an Apex application that is required to pass data to a web service for loading into another (non Oracle) system. The web service expects two stings as input, the first string is simply an ID, the second string is an xml document. I generate an xml 'string' using PL/SQL in an on-submit process prior to invoking the web service. If I pass regular text for the second parameter, the web service returns an error message which is stored in the response collection and displayed on the page as expected. When I pass the the xml data, I get a no data found error and the response collection is empty. I have tried this in our development environment on Apex 3.1.2 (database version 10.2). I also tried this on our Apex 4.0.2 sandbox (with the same Oracle 10.2 database). I have found that once I have nested xml, I get the no data found message, if I pass partial xml data, I get the error response from the web service. Perhaps I am not generating the xml correctly to pass to the web service (this only just occurred to me as I write this)? Or is there an issue passing xml data from Apex to the web service? Any help will be greatly appreciated! here is the code I use to generate the xml string:
declare
cursor build_data is
    select u_catt_request_buid,u_catt_request_name,u_catt_cassette_buid,u_catt_cassette_name
      ,u_project_name,u_sub_project,replace(u_nominator,'ERROR ','') u_nominator
      ,replace(replace(u_going_to_vqc,'Yes','true'),'No','false') u_going_to_vqc
      ,u_promoter,u_cds,u_terminator
      ,u_primary_trait,u_source_mat_prvd,u_pro_resistance_1,u_vector_type
      ,nvl(u_my_priority,'Medium') u_my_priority
      ,replace(replace(u_immediate_trafo,'Yes','true'),'No','false') u_immediate_trafo
      ,replace(replace(u_new_bps_cmpnt,'Yes','true'),'No','false') u_new_bps_cmpnt
      ,u_compnt_name,u_new_cmpt_desc,initcap(u_target_crop) u_target_crop,u_corn_line
      ,u_plant_selection,u_num_of_ind_events,u_num_plants_per_event,u_molecular_quality_events
      ,replace(replace(u_field,'Yes','true'),'No','false') u_field
      ,u_t1_seed_request,u_potential_phenotype,u_submission_date
      ,u_sequence_length,u_trait,u_frst_parent,u_frst_parent_vshare_id,u_cds_vshare_id
      ,constructid,cassetteid,description
    from temp_constructs_lims
    order by constructid,description;
v_xml_info         varchar2(350);
v_xml_header       varchar2(1000);
v_xml_data         clob;
v_xml_footer       varchar2(50);
v_create_date      varchar2(10);
v_scientist_name   v_users.full_name%type;
v_scientist_email v_users.email_address%type;
v_primas_code      construct.fkprimas%type;
v_nominator_name   v_nominators.full_name%type;
v_file_length      number;
begin
-- initialize variables
v_create_date := to_char(sysdate,'YYYY-MM-DD');
v_xml_data := null;
-- get name and email address
begin
    select full_name,email_address
    into v_scientist_name,v_scientist_email
    from v_users
    where ldap_account = :F140_USER_ID;
exception when no_data_found then
    v_scientist_name := '';
    v_scientist_email := '';
    v_scientist_name := 'Test, Christine';
    v_scientist_email := '[email protected]';
end;
-- set up xml file
if :OWNER like '%DEV%' then
    v_xml_info := '
      <?xml version="1.0" encoding="utf-8"?>
      <exchange xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
                xmlns="deService"
                xsi:schemaLocation="deService http://mycompany.com/webservices/apexdataexchange/schemas/RTPCATT.xsd">
else
    v_xml_info := '
      <?xml version="1.0" encoding="utf-8"?>
      <exchange xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
                xmlns="deService"
                xsi:schemaLocation="deService http://mycompanyprod.com/webservices/apexdataexchange/schemas/RTPCATT.xsd">
end if;
-- populate xml header records
v_xml_header := '<header xmlns="">
    <stdXmlVer>2.0</stdXmlVer>
    <sendingUnit>'||:P36_UNIT_NUMBER||'</sendingUnit>
    <sendingPerson>'||v_scientist_name||'</sendingPerson>
    <notification>'||v_scientist_email||'</notification>
    <creationDate>'||v_create_date||'</creationDate>
</header>
<entities xmlns="">
for rec in build_data loop
    begin
      -- get primas code for current construct
      select fkprimas
      into v_primas_code
      from construct
      where constructid = rec.constructid;
    exception when no_data_found then
      v_primas_code := null;
    end;
    begin
      -- get nominator name for current construct
      select full_name
      into v_nominator_name
      from v_nominators
      where nominator_id = rec.u_nominator;
    exception
      when no_data_found then
        v_nominator_name := null;
      when invalid_number then
        v_nominator_name := catt_pkg.full_name_from_user_id(p_user_id => rec.u_nominator);
        v_nominator_name := 'Test, Christine';
    end;
    v_xml_data := v_xml_data||'
      <Construct>
      <requestBUID>'||rec.u_catt_request_buid||'</requestBUID>
      <requestName>'||rec.u_catt_request_name||'</requestName>
      <cassetteBUID>'||rec.u_catt_cassette_buid||'</cassetteBUID>
      <cassetteName>'||rec.u_catt_cassette_name||'</cassetteName>
      <scientist>'||v_scientist_name||'</scientist>
      <projectNumber>'||v_primas_code||'</projectNumber>
      <subProject>'||rec.u_sub_project||'</subProject>
      <comments>'||rec.description||'</comments>
      <nominator>'||v_nominator_name||'</nominator>
      <goingToVqc>'||rec.u_going_to_vqc||'</goingToVqc>
      <primaryTrait>'||rec.u_primary_trait||'</primaryTrait>
      <sourceMatPrvd>'||rec.u_source_mat_prvd||'</sourceMatPrvd>
      <prokaryoticResistance>'||rec.u_pro_resistance_1||'</prokaryoticResistance>
      <vectorType>'||rec.u_vector_type||'</vectorType>
      <priority>'||rec.u_my_priority||'</priority>
      <immediateTrafo>'||rec.u_immediate_trafo||'</immediateTrafo>
      <newComponent>'||rec.u_new_bps_cmpnt||'</newComponent>
      <componentName>'||rec.u_compnt_name||'</componentName>
      <newComponentDescription>'||rec.u_new_cmpt_desc||'</newComponentDescription>
      <targetCrop>'||rec.u_target_crop||'</targetCrop>
      <Line>'||rec.u_corn_line||'</Line>
      <plantSelection>'||rec.u_plant_selection||'</plantSelection>
      <numOfIndEvents>'||rec.u_num_of_ind_events||'</numOfIndEvents>
      <numOfPlantsPerEvent>'||rec.u_num_plants_per_event||'</numOfPlantsPerEvent>
      <molecularQualityEvents>'||rec.u_molecular_quality_events||'</molecularQualityEvents>
      <toField>'||rec.u_field||'</toField>
      <potentialPhenotype>'||rec.u_potential_phenotype||'</potentialPhenotype>
      </Construct>
end loop;
-- complete xml data
v_xml_footer := '
      </entities>
    </exchange>
-- complete submission data
:P36_XML_SUBMISSION := null;
:P36_XML_SUBMISSION := v_xml_info||v_xml_header||v_xml_data||v_xml_footer;
:P36_XML_SUBMISSION := trim(:P36_XML_SUBMISSION);
end;Here is an example of :P36_XML_SUBMISSION:
<?xml version="1.0" encoding="utf-8"?> <exchange xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="deService" xsi:schemaLocation="deService http://mycompany.com/webservices/apexdataexchange/schemas/RTPCATT.xsd"> <header xmlns=""> <stdXmlVer>2.0</stdXmlVer> <sendingUnit>10</sendingUnit> <sendingPerson>Test, Christine</sendingPerson> <notification>[email protected]</notification> <creationDate>2011-12-20</creationDate> </header> <entities xmlns=""> <Construct> <requestBUID>150000123</requestBUID> <requestName>AA0000123</requestName> <cassetteBUID>160000123</cassetteBUID> <cassetteName>AB000123</cassetteName> <scientist>Test, Christine</scientist> <projectNumber>T000123</projectNumber> <subProject>Discovery Plus</subProject> <comments>AA0000123 From CATT on 20-DEC-11 </comments> <nominator>Test, Christine</nominator> <goingToVqc>true</goingToVqc> <primaryTrait>promoter::intron::transit:gene::terminator</primaryTrait> <sourceMatPrvd>seed - stuff</sourceMatPrvd> <prokaryoticResistance></prokaryoticResistance> <vectorType>Plant Vector</vectorType> <priority>Medium</priority> <immediateTrafo>true</immediateTrafo> <newComponent></newComponent> <componentName>gene</componentName> <newComponentDescription>unknown function; sequence has some similarity to others</newComponentDescription> <targetCrop>Crop</targetCrop> <Line>Inbred</Line> <plantSelection>smidge ver2</plantSelection> <numOfIndEvents>6</numOfIndEvents> <numOfPlantsPerEvent>1</numOfPlantsPerEvent> <molecularQualityEvents>NA</molecularQualityEvents> <toField>true</toField> <potentialPhenotype></potentialPhenotype> </Construct> </entities> </exchange>My application page is accessed by an action from another page. The user reviews the data in a sql report region. When the use clicks on the Upload (SUBMIT) button, the xml string is generated first and then the web service is invoked. I have tried passing a simple string as the second parameter ("dummydata") and partial data in the xml string ("<sendingPerson>Test, Christine</sendingPerson>") the web service returns this error in both cases:
Error[Validate Data]: (XML) = Data at the root level is invalid. Line 1, position 1.. Cannot validate the XML! Data Exchange not accepted!Once I pass the entire xml string above, I get an Oracle-01403: no data found error. I have opened the web service in IE and pasted my xml input string and received a valid, verified result, so I am sure that the generated xml is correct. I have spoken with the web service developer; there are no log entries created by the web service when I submit the full xml string, so I suspect the failure is in the Apex application.
Thanks,
Christine
I should add that once I have nested tags in the xml, I get the Oracle no data found error ("<header xmlns=""> <stdXmlVer>2.0</stdXmlVer> <sendingUnit>10</sendingUnit> </header>"). I f I do not have nested tags in the xml ("<notification>[email protected]</notification> <creationDate>2011-12-20</creationDate>"), I get the web service response (error).
Edited by: ChristineD on Dec 20, 2011 9:54 AM

Ok, I think I'm getting closer to thinking this all the way through. When I have used clobs in the past, I've always used the DBMS_CLOB package. I use this to create a temp clob and then make the above calls. I had to go find an example in my own code to remember all of this. So, here is another suggestion... feel free to disregard all the previous code snippets..
declare
cursor build_data is
    select u_catt_request_buid,u_catt_request_name,u_catt_cassette_buid,u_catt_cassette_name
      ,u_project_name,u_sub_project,replace(u_nominator,'ERROR ','') u_nominator
      ,replace(replace(u_going_to_vqc,'Yes','true'),'No','false') u_going_to_vqc
      ,u_promoter,u_cds,u_terminator
      ,u_primary_trait,u_source_mat_prvd,u_pro_resistance_1,u_vector_type
      ,nvl(u_my_priority,'Medium') u_my_priority
      ,replace(replace(u_immediate_trafo,'Yes','true'),'No','false') u_immediate_trafo
      ,replace(replace(u_new_bps_cmpnt,'Yes','true'),'No','false') u_new_bps_cmpnt
      ,u_compnt_name,u_new_cmpt_desc,initcap(u_target_crop) u_target_crop,u_corn_line
      ,u_plant_selection,u_num_of_ind_events,u_num_plants_per_event,u_molecular_quality_events
      ,replace(replace(u_field,'Yes','true'),'No','false') u_field
      ,u_t1_seed_request,u_potential_phenotype,u_submission_date
      ,u_sequence_length,u_trait,u_frst_parent,u_frst_parent_vshare_id,u_cds_vshare_id
      ,constructid,cassetteid,description
    from temp_constructs_lims
    order by constructid,description;
v_xml_info         varchar2(350);
v_xml_header       varchar2(1000);
v_xml_data         clob;
v_xml_footer       varchar2(50);
v_create_date      varchar2(10);
v_scientist_name   v_users.full_name%type;
v_scientist_email v_users.email_address%type;
v_primas_code      construct.fkprimas%type;
v_nominator_name   v_nominators.full_name%type;
v_file_length      number;
v_xml_body    varchar2(32767); --added by AustinJ
v_page_item    varchar2(32767); --added by AustinJ
begin
-- initialize variables
v_create_date := to_char(sysdate,'YYYY-MM-DD');
--v_xml_data := null;   --commented out by AustinJ
dbms_lob.createtemporary( v_xml_data, FALSE, dbms_lob.session ); --added by AustinJ
dbms_lob.open( v_xml_data, dbms_lob.lob_readwrite ); --added by AustinJ
-- get name and email address
begin
    select full_name,email_address
    into v_scientist_name,v_scientist_email
    from v_users
    where ldap_account = :F140_USER_ID;
exception when no_data_found then
    v_scientist_name := '';
    v_scientist_email := '';
    v_scientist_name := 'Test, Christine';
    v_scientist_email := '[email protected]';
end;
-- set up xml file
if :OWNER like '%DEV%' then
    v_xml_info := '
      <?xml version="1.0" encoding="utf-8"?>
      <exchange xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
                xmlns="deService"
                xsi:schemaLocation="deService http://mycompany.com/webservices/apexdataexchange/schemas/RTPCATT.xsd">
else
    v_xml_info := '
      <?xml version="1.0" encoding="utf-8"?>
      <exchange xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
                xmlns="deService"
                xsi:schemaLocation="deService http://mycompanyprod.com/webservices/apexdataexchange/schemas/RTPCATT.xsd">
end if;
-- populate xml header records
v_xml_header := '<header xmlns="">
    <stdXmlVer>2.0</stdXmlVer>
    <sendingUnit>'||:P36_UNIT_NUMBER||'</sendingUnit>
    <sendingPerson>'||v_scientist_name||'</sendingPerson>
    <notification>'||v_scientist_email||'</notification>
    <creationDate>'||v_create_date||'</creationDate>
</header>
<entities xmlns="">
for rec in build_data loop
    begin
      -- get primas code for current construct
      select fkprimas
      into v_primas_code
      from construct
      where constructid = rec.constructid;
    exception when no_data_found then
      v_primas_code := null;
    end;
    begin
      -- get nominator name for current construct
      select full_name
      into v_nominator_name
      from v_nominators
      where nominator_id = rec.u_nominator;
    exception
      when no_data_found then
        v_nominator_name := null;
      when invalid_number then
        v_nominator_name := catt_pkg.full_name_from_user_id(p_user_id => rec.u_nominator);
        v_nominator_name := 'Test, Christine';
    end;
    v_xml_body := '
      <Construct>
      <requestBUID>'||rec.u_catt_request_buid||'</requestBUID>
      <requestName>'||rec.u_catt_request_name||'</requestName>
      <cassetteBUID>'||rec.u_catt_cassette_buid||'</cassetteBUID>
      <cassetteName>'||rec.u_catt_cassette_name||'</cassetteName>
      <scientist>'||v_scientist_name||'</scientist>
      <projectNumber>'||v_primas_code||'</projectNumber>
      <subProject>'||rec.u_sub_project||'</subProject>
      <comments>'||rec.description||'</comments>
      <nominator>'||v_nominator_name||'</nominator>
      <goingToVqc>'||rec.u_going_to_vqc||'</goingToVqc>
      <primaryTrait>'||rec.u_primary_trait||'</primaryTrait>
      <sourceMatPrvd>'||rec.u_source_mat_prvd||'</sourceMatPrvd>
      <prokaryoticResistance>'||rec.u_pro_resistance_1||'</prokaryoticResistance>
      <vectorType>'||rec.u_vector_type||'</vectorType>
      <priority>'||rec.u_my_priority||'</priority>
      <immediateTrafo>'||rec.u_immediate_trafo||'</immediateTrafo>
      <newComponent>'||rec.u_new_bps_cmpnt||'</newComponent>
      <componentName>'||rec.u_compnt_name||'</componentName>
      <newComponentDescription>'||rec.u_new_cmpt_desc||'</newComponentDescription>
      <targetCrop>'||rec.u_target_crop||'</targetCrop>
      <Line>'||rec.u_corn_line||'</Line>
      <plantSelection>'||rec.u_plant_selection||'</plantSelection>
      <numOfIndEvents>'||rec.u_num_of_ind_events||'</numOfIndEvents>
      <numOfPlantsPerEvent>'||rec.u_num_plants_per_event||'</numOfPlantsPerEvent>
      <molecularQualityEvents>'||rec.u_molecular_quality_events||'</molecularQualityEvents>
      <toField>'||rec.u_field||'</toField>
      <potentialPhenotype>'||rec.u_potential_phenotype||'</potentialPhenotype>
      </Construct>
    ';    --modified by AustinJ
    dbms_lob.writeappend( v_xml_data, length(v_xml_body), v_xml_body);   --added by AustinJ
end loop;
-- complete xml data
v_xml_footer := '
      </entities>
    </exchange>
-- complete submission data
v_page_item := null;
v_page_item := v_xml_info||v_xml_header||wwv_flow.do_substitutions(wwv_flow_utilities.clob_to_varchar2(v_xml_data))||v_xml_footer;   --added by AustinJ
:P36_XML_SUBMISSION := trim(v_page_item);   --added by AustinJ
    dbms_lob.close( v_xml_data); --added by AustinJ
    if v_xml_data is not null then
        dbms_lob.freetemporary(v_xml_data);   --added by AustinJ
    end if; --added by AustinJ
end;This code will use the Database to construct your clob and then convert it back to a varchar2 for output to your webservice. This makes more sense to me now and hopefully you can follow what the process is doing.
You don't technically need the two varchar2(36767) variables. I used two for naming convention clarity sake. You could use just one multipurpose variable instead.
If you have any questions, just ask. I'll help if I can.
Austin
Edited by: AustinJ on Dec 20, 2011 12:17 PM
Fixed spelling mistakes.

401 Unauthorized Error When calling a SharePoint REST web service from SharePoint 2013 Workflow

We have our Workflow Manger installed on the same server as our SharePoint 2013 WFE development environment. When creating a SharePoint 2013 Workflow all Calls to a SharePoint 2013 REST web service results in a 401 Unauthorized error.
As an example I created a simple workflow that should return a JSON result. The REST Url returns the results in the browser without error.
Set Variable:webServiceUrl to https://<hostnamedsitecollection>/_vti_bin/client.svc/web/lists/getbytitle('ISR%20Approvers')/Items?$select=Title&$filter=Title%20eq%20%27General%27
then Build{...} Dictionary (Output to Variable:requestHeaders)
then Call [%Variable:webServiceUrl%] HTTP web service with request (ResponseContent to Variable:responseContent |ResponseHeaders to responseHeaders | ResponseStatusCode to Variable:responseCode)
The RequestHeader is set to the requestHeaders variable though the web service call properties
then Log Variable:responseCode to the workflow history list
After manually running the workflow in SharePoint on a list item in the ISR Approvers list it Logs "Unauthorized" in the Workflow History Log. It does this with every SharePoint REST web service call that I have tried through the workflow.
It doesn't have anything to do with the Workflow Manger being installed on the same machine as the SharePoint WFE does it?
Thank You for any insight

Hi,
According to your post, my understanding is that you had 401 Unauthorized Error when calling a SharePoint REST web service from SharePoint 2013 Workflow.
Please make sure you use the ‘Call HTTP Web Service’ correctly.
You can enter the URL into the brower to check whether it is correctly.
You need to
create the Request header requestHeaders
using a Dictionary:
Accept : application/json;odata=verbose
Content-Type : application/json;odata=verbose
To associate the
requestHeaders variable, select the Call action
property, set the RequestHeaders property to
requestHeaders.
Please refer to the following articles:
Working with Web Services in SharePoint 2013 Workflows using SharePoint Designer 2013
Calling the SharePoint 2013 Rest API from a SharePoint Designer
Workflow
In addtion, you need to make sure you install the workflow manager correctly.
More information:
Install and configure workflow for SharePoint Server 2013
Known Issues in Workflow Manager 1.0
Troubleshooting Workflow Manager 1.0 Management and Execution
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Unknown Error while communicating with O365 BEC Web Service

Hi Guys,
When I try to add a new mail user in O365 Exchange, one strange error is thrown.
Are any guys kind enough to help me ?
Here is the script and the error.
PS C:\Users\o365-user> $cred = New-Object -TypeName System.Management.Automation.PSCredential -ArgumentList
'[email protected]', $(ConvertTo-SecureString -String '*******' -AsPlainText -Force)
PS C:\Users\o365-user> $session = New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUri 'https:
//ps.outlook.com/powershell/' -Credential $cred -Authentication Basic -AllowRedirection
WARNING: Your connection has been redirected to the following URI:
"https://pod51053psh.outlook.com/powershell-liveid?PSVersion=4.0 "
PS C:\Users\o365-user> Import-PSSession $session
WARNING: The names of some imported commands from the module 'tmp_zkc5sid4.gpq' include unapproved verbs that might
make them less discoverable. To find the commands with unapproved verbs, run the Import-Module command again with the
Verbose parameter. For a list of approved verbs, type Get-Verb.
ModuleType Version Name ExportedCommands
Script 1.0 tmp_zkc5sid4.gpq {Add-AvailabilityAddressSpace, Add-DistributionGroupMember...
PS C:\Users\o365-user> $users=Get-MailUser
PS C:\Users\o365-user> New-MailUser -Name '[email protected]' -DisplayName 'Test LIU'
-MicrosoftOnlineServicesID '[email protected]' -Password $(ConvertTo-SecureString -String '*****' -AsPlainText -Force)
Unknown Error while communicating with O365 BEC Web Service (Exception type
"Microsoft.Exchange.Management.BecWebService.CouldNotCreateBecSyncServiceException", message=
"Microsoft.Exchange.Management.BecWebService.CouldNotCreateBecSyncServiceException: Couldn't create BEC Web Service:
The matching certificate for certificateSubject CN=ExoProvToO365.outlook.com, OU=Microsoft Corporation, O=Microsoft
Corporation, L=Redmond, S=WA, C=US couldn't be found.
Parameter name: certificateSubject ---> System.ArgumentException: The matching certificate for certificateSubject
CN=ExoProvToO365.outlook.com, OU=Microsoft Corporation, O=Microsoft Corporation, L=Redmond, S=WA, C=US couldn't be
found.
Parameter name: certificateSubject
at Microsoft.Exchange.Security.Cryptography.X509Certificates.TlsCertificateInfo.FindFirstCertWithSubjectDistinguishe
dName(String certificateSubject, Boolean checkForValid)
at Microsoft.Exchange.Management.BecWebService.BecWebServiceHelper.CreateService(Uri url)
--- End of inner exception stack trace ---
at Microsoft.Exchange.Management.BecWebService.BecWebServiceHelper.InvokeWithRetry[TResponse](Action operation)
at Microsoft.Exchange.Management.BecWebService.BecWebServiceHelper.GetUserByUpn(GetUserByUpnRequest request)
at Microsoft.Exchange.ProvisioningAgent.BecWebServiceLiveIdManager.GetMemberType(SmtpAddress memberName)", inner
message "System.ArgumentException: The matching certificate for certificateSubject CN=ExoProvToO365.outlook.com,
OU=Microsoft Corporation, O=Microsoft Corporation, L=Redmond, S=WA, C=US couldn't be found.
Parameter name: certificateSubject
at Microsoft.Exchange.Security.Cryptography.X509Certificates.TlsCertificateInfo.FindFirstCertWithSubjectDistinguishe
dName(String certificateSubject, Boolean checkForValid)
at Microsoft.Exchange.Management.BecWebService.BecWebServiceHelper.CreateService(Uri url)")
+ CategoryInfo : NotSpecified: (0:Int32) [New-MailUser], RecipientTaskException
+ FullyQualifiedErrorId : [Server=SG2PR01MB0540,RequestId=d97a193e-91a7-4430-ac64-6b7003f5b9b0,TimeStamp=4/23/2015
9:37:58 AM] [FailureCategory=Cmdlet-RecipientTaskException] 3F9FDA25,Microsoft.Exchange.Management.RecipientTasks
.NewMailUser
+ PSComputerName : pod51053psh.outlook.com
PS C:\Users\o365-user> New-ManagementRoleAssignment -Role 'ApplicationImpersonation' -User 'test1_1@smokeazu
rebeta5.onmicrosoft.com'
Couldn't find a user with the identity "[email protected]".
+ CategoryInfo : NotSpecified: (:) [New-ManagementRoleAssignment], ManagementObjectNotFoundException
+ FullyQualifiedErrorId : [Server=SG2PR01MB0540,RequestId=88777637-298d-4bb1-972f-b61161566a57,TimeStamp=4/23/2015
9:37:59 AM] [FailureCategory=Cmdlet-ManagementObjectNotFoundException] 921A76AD,Microsoft.Exchange.Management.Rba
cTasks.NewManagementRoleAssignment
+ PSComputerName : pod51053psh.outlook.com
PS C:\Users\o365-user> New-ManagementRoleAssignment -Role 'Mailbox Search' -User '[email protected]
microsoft.com'
Couldn't find a user with the identity "[email protected]".
+ CategoryInfo : NotSpecified: (:) [New-ManagementRoleAssignment], ManagementObjectNotFoundException
+ FullyQualifiedErrorId : [Server=SG2PR01MB0540,RequestId=2b64d3a2-97da-4de5-be8c-00ad73452456,TimeStamp=4/23/2015
9:38:00 AM] [FailureCategory=Cmdlet-ManagementObjectNotFoundException] 921A76AD,Microsoft.Exchange.Management.Rba
cTasks.NewManagementRoleAssignment
+ PSComputerName : pod51053psh.outlook.com
PS C:\Users\o365-user> Remove-PSSession $session
PS C:\Users\o365-user>
Thanks
Budlion LIU

Hello,
Or you can also ask on Exchange Online Forum:
https://social.technet.microsoft.com/Forums/msonline/en-US/home?forum=onlineservicesexchange
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Error communicating with the Cluster Manage Web Service

Hi,
i connected oracle database with the Endeca Studio but while uploading Departments dataset i m getting this error
"Error communicating with the Cluster Manage Web Service" so plz can anyone explain me wat is this error about.
thanks in advance

I actually ran into this myself- as Pat notes, it's hard to say without seeing log files, but I think that perhaps the default domain profile that the Endeca Server uses for domains created using Provisioning services has not been created. First see what domain profiles exist. Navigate to wherever endeca-cmd lives (e.g., user_projects/domains/endeca_server_domain/EndecaServer/bin), and use the list-dd-profile command:
-bash-3.2$ ./endeca-cmd.sh list-dd-profiles
The profiles that exist will be returned in your terminal window:
prov_dd_profile
default
If you only see 'default', then you will need to create 'prov_dd_profile'
./endeca-cmd.sh put-dd-profile prov_dd_profile
Then try uploading your file again in Studio.
Cheers,
Andrew

Error while trying to publish a web service in UDDI client

hi
i m getting this error when trying to publish my web service in UDDI client.I have
configured my uddi client using Visual Administrator.I created a local test registry.The name of my registry is QuickCarRentalRegistry_Local.I created this at admin level.I also tried at level 1 Tier.But it was giving the same error.
The error is "<b> Internet Explorer Script Error</b>".my ie version is 7.0
In my alert window it displays error: 'ur_txt' is undefined.
Regards
mythri.

Hi mythri.
Did you find a way out of this error? Could you share the solution with me? Because I am facing a problem that looks just like the one you had.
Thanks in advance.
Renan

How to pass in a parameter into a report viewer on a jsp - and hidden

Hi, I've built a php application and am using the java environment to enable the crystal report/viewer. The developer was looking how to pass in a parameter into a report viewer on a jsp. Ultimately the end product we need is to get an HTML report viewer loading a report file with hidden parameters so to not expose other customer data (it's a shared database for multiple customers) preferably loaded from php using maybe the php java bridge. Would anyone happen to have any sample code or any guidance?
<%@ page contentType="text/html; charset=UTF-8"
pageEncoding="ISO-8859-1"%>
<%@ taglib uri="/crystal-tags-reportviewer.tld" prefix="crviewer"%>
<%
// just a test to grab rpt name from GET
String rptFile = "report_files/" + request.getParameter("rpt");
%>
<crviewer:viewer reportSourceType="reportingComponent" viewerName=""
isOwnPage="true">
<crviewer:report reportName="<%= rptFile %>" />
</crviewer:viewer>
Many thanks in advance!
Mark

I am not aware of any html tags you can pass to the viewer for parameter values. Normally, you would load the report in code and then use the SDK with the report object to pass parameter values.

Migrating BAPI & RFC function modules into web services

What is the advantage of migrating BAPI & RFC function modules into web services?

Hi.
That's a very good question. Why did you ask it, are you considering doing so?
I wouldn't think there would be any performance advantages using WebServices.
You could make your BAPI's available for other systems than Web Dynpro or SAP systems by turning them into WebServices.
That could be an issue when you want to use different integration engines perhaps.
A WebService might also be better for dealing with large number of requests I guess.
When dealing with XML you can also use the advantage of XSLT for validating your data.
The main advantages would still be the availability of your service for non-SAP systems.
/Mikael

HP 7520 Photosmart scanning error message: Unable to connect to Web Services

After many successful efforts in the past, suddenly I cannot scan to email on my HP Photosmart 7520. I have tried several of the solutions posted to no avail. I keep getting the error message "Unable to connect to Web Services. Confirm Iternet access and try again." I'm on Mac OS X. Very frustrating; I would appreciate help.

Hello skagitsusan,
Welcome to the HP Support Forums!
I am not 100% as to the steps you have tried in attempt to resolve the Scan to Email issue on the 7520, but I would like to offer the steps I have given in another Thread.
Re: Trouble scanning using Photosmart 6520 <---
The steps will cover your printer, even though they are different Photosmarts.
Let me know if this works.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Convert FM into web services

Hi,
I have a function module and I want to convert it into web services. Is it required that the FM must be RFC enabled?
Regards ,
Godadhar.

yes.
Please check link:
http://help.sap.com/saphelp_nw04/helpdata/en/e9/ae1b9a5d2cef4ea4b579f19d902871/frameset.htm
"To create a Web service from a function group or function module, you can call the Creation Wizard from the Function Builder (SE37). Choose the function module, display it, then choose Utilities --> More Utilities --> Create Web Service --> From the Function Moduleor From the Function Group.
Note that the function group must contain at least one RFC-enabled function module."

"Unable to log URL" error when importing WSDL into Web Service connection

Hello Experts
I'm using Xcelsius Engage and I'd like to use Web Service connection.
I've developed my own Web service (that is using 2 other web service inside it).
and now I'm trying to import it into the Xcelsius (connection --> Web service connection).
And I get the follwoing error:
"Unable to log URL"
When I browse to my wsdl file in IE the file is loaded with no problem.
When trying to import other URLs it also works fine (for example: http://www.xignite.com/xFinancials.asmx?wsdl)
Any idea?
Thanks,
Miki

Hi Matt
Thanks a lot!!!
Indeed the solution was in the follwoing thread:
VB.net code to create XML
Parsing the query result fixed the problem.
For others who might have the same problem:
Here's a working web service (C# code, for vb code follow the link to the thread above):
public Service () {
    public struct QueryResult
      public string SlpName;
      public string Commission;
    [WebMethod]
public QueryResult[] RunQuery()
      // Open Connection - Query Data from DB table - Close connection
      SqlConnection connection = new SqlConnection("Data Source=(local);Integrated Security=SSPI;Initial Catalog=SBODemoUS");
      SqlDataAdapter adapter = new SqlDataAdapter(
        "SELECT SlpName, Commission FROM OSLP", connection);
      DataTable DT_QryResult = new DataTable();
      adapter.Fill(DT_QryResult);
      connection.Close();
      // Parse data to be forward to Xcelsius
      QueryResult[] QryRes = null;
      QryRes = new QueryResult[DT_QryResult.Rows.Count];
      int i=0;
      foreach (DataRow row in DT_QryResult.Rows)
        QryRes<i>.SlpName = row["SlpName"].ToString();
        QryRes<i>.Commission = row["commission"].ToString();
        i++;
      return QryRes;
Best regards,
Miki

How to pass XMLNode to JAX-RPc web service

I am new to web services using JAX-RPC.
Here is my problem. I need to pass Node object from org.w2c.dom.Node to webservice (using JAX-RPC) and return canonicalBytes back to client.
I know I cannot pass Node directly as a parameter to the method (checked Java Language Typed supported by JAX-RPC).
So to cheat the system, I put in this Node object into a vector and then passed this vector to web service.
Here is the exception:-
java.rmi.RemoteException: serialization error: no serializer is registered for (class oracle.xml.parser.v2.XMLElement, null); nested exception is:
     serialization error: no serializer is registered for (class oracle.xml.parser.v2.XMLElement, null)
     at com.peppercoin.webservice.security.ISignatureVerification_Stub.getCanonicalBytes(ISignatureVerification_Stub.java:77)
     at HelloClient.main(HelloClient.java:29)
Caused by: serialization error: no serializer is registered for (class oracle.xml.parser.v2.XMLElement, null)
     at com.sun.xml.rpc.encoding.DynamicSerializer.getSerializerForObject(DynamicSerializer.java:69)
     at com.sun.xml.rpc.encoding.DynamicSerializer.serialize(DynamicSerializer.java:52)
     at com.sun.xml.rpc.encoding.ReferenceableSerializerImpl.serialize(ReferenceableSerializerImpl.java:59)
     at com.sun.xml.rpc.encoding.soap.CollectionSerializer.serializeArrayElements(CollectionSerializer.java:72)
     at com.sun.xml.rpc.encoding.soap.CollectionSerializer.serializeArrayInstance(CollectionSerializer.java:55)
     at com.sun.xml.rpc.encoding.soap.CollectionSerializerBase.serialize(CollectionSerializerBase.java:98)
     at com.sun.xml.rpc.encoding.ReferenceableSerializerImpl.serialize(ReferenceableSerializerImpl.java:59)
     at com.peppercoin.webservice.security.ISignatureVerification_getCanonicalBytes_RequestStruct_SOAPSerializer.doSerializeInstance(ISignatureVerification_getCanonicalBytes_RequestStruct_SOAPSerializer.java:62)
     at com.sun.xml.rpc.encoding.ObjectSerializerBase.serialize(ObjectSerializerBase.java:100)
     at com.sun.xml.rpc.encoding.ReferenceableSerializerImpl.serialize(ReferenceableSerializerImpl.java:59)
     at com.sun.xml.rpc.client.StreamingSender._writeRequest(StreamingSender.java:441)
     at com.sun.xml.rpc.client.StreamingSender._send(StreamingSender.java:63)
     at com.peppercoin.webservice.security.ISignatureVerification_Stub.getCanonicalBytes(ISignatureVerification_Stub.java:60)
     ... 1 more
Every works great as long as i put in strings in Vector.
Is there a work around or did i miss anything, Please help
I am using Oracle Parser
Thanks
Sagar Malisetti

You can't "cheat the system" this way. The serializer for Vector is trying to find a serializer for the elements in the Vector instance that it received. So, it is trying to find a serializer for whatever is the the runtime type of your org.w3c.dom.Node. When it can't find such a serializer in the TypeMappingRegistry, it throws the exception.

Error while trying to call external web service from oracle PL/SQL 10.2 g

Hi I am trying to call an external web service from oracle PL/SQL .I am getting following run time error when I try to set the opeartion style.
But as per the oracle documentation this is one of the 2 valid values.
ORA-29532: Java call terminated by uncaught Java exception: operation style: "document" not supported.Teh webservice does expect the operation style as document.
Following is the code I am executing.
FUNCTION email
return varchar2
AS
service_ SYS.utl_dbws.SERVICE;
call_ SYS.utl_dbws.CALL;
service_qname SYS.utl_dbws.QNAME;
port_qname SYS.utl_dbws.QNAME;
operation_qname SYS.utl_dbws.QNAME;
string_type_qname SYS.utl_dbws.QNAME;
retx ANYDATA;
retx_string VARCHAR2(1000);
retx_double number;
retx_len number;
params SYS.utl_dbws.ANYDATA_LIST;
l_input_params SYS.utl_dbws.anydata_list;
l_result ANYDATA;
l_namespace VARCHAR2(1000);
begin
-- open internet explorer and navigate to http://webservices.imacination.com/distance/Distance.jws?wsdl
-- search for 'targetNamespace' in the wsdl
l_namespace := 'http://service.xmlservices.global.freedomgroup.com/';
-- search for 'service name' in the wsdl
service_qname := SYS.utl_dbws.to_qname(l_namespace, 'ClientCoreWebServiceBeanService');
-- this is just the actual wsdl url
service_ := SYS.utl_dbws.create_service(HTTPURITYPE('http://hostname/GlobalWebServices/services/ClientCoreWebService?wsdl'), service_qname);
-- search for 'portType name' in the wsdl
port_qname := SYS.utl_dbws.to_qname(l_namespace, 'ClientCoreWebServiceBeanPort');
-- search for 'operation name' in the wsdl
-- there will be a lot, we will choose 'getCity'
operation_qname := SYS.utl_dbws.to_qname(l_namespace, 'postalCodelookup');
-- bind things together
call_ := SYS.utl_dbws.create_call(service_, port_qname, operation_qname);
-- default is 'FALSE', so we make it 'TRUE'
SYS.utl_dbws.set_property(call_, 'SOAPACTION_USE', 'TRUE');
-- search for 'operation soapAction' under <wsdl:operation name="getCity">
-- it is blank, so we make it ''
SYS.utl_dbws.set_property(call_, 'SOAPACTION_URI', '');
-- search for 'encodingstyle' under <wsdl:operation name="getCity">
SYS.utl_dbws.set_property(call_, 'ENCODINGSTYLE_URI', 'http://schemas.xmlsoap.org/soap/encoding/');
-- search for 'binding style'
SYS.utl_dbws.set_property(call_, 'OPERATION_STYLE', 'DOCUMENT');
-- search for 'xmlns:xs' to know the value of the first parameter
-- under <wsdl:message name="getCityResponse"> you will see the line <wsdl:part name="getCityReturn" type="xsd:string" />
-- thus the return type is 'string", removing 'xsd:'
string_type_qname := SYS.utl_dbws.to_qname('http://www.w3.org/2001/XMLSchema', 'string');
-- in the line <wsdl:operation name="getCity" parameterOrder="zip">
-- the parameterOrder is 'zip', thus we put in 'zip'
-- the 'ParameterMode.IN' is used to specify that we will be passing an "In Parameter" to the web service
-- the 'ParameterMode.IN' is a constant variable in the sys.utl_dbws package
--vj this cud be either params or xml
SYS.utl_dbws.add_parameter(call_, 'param1', string_type_qname, 'ParameterMode.IN');
SYS.utl_dbws.add_parameter(call_, 'param2', string_type_qname, 'ParameterMode.IN');
SYS.utl_dbws.set_return_type(call_, string_type_qname);
-- supply the In Parameter for the web service
params(0) := ANYDATA.convertvarchar('<TFGGlobalBasicXMLDO><systemCd>GLOBAL</systemCd><username>GlobalAdmin</username><password>GlobalAdmin</password><localID>1</localID></TFGGlobalBasicXMLDO>');
params(1) := ANYDATA.convertvarchar('<TFGGlobalPostalCodeLookupIDDO><postalCode>02446</postalCode><countryCode>USA</countryCode><stateCode>MA</stateCode><cityDisplay>BROOKLINE</cityDisplay><countyDisplay>NORFOLK</countyDisplay><include_inactive_flag>True</include_inactive_flag></TFGGlobalPostalCodeLookupIDDO>');
-- invoke the web service
retx := SYS.utl_dbws.invoke(call_, params);
dbms_output.put_line(retx.gettypename);
-- access the returned value and output it to the screen
retx_string := retx.accessvarchar2;
dbms_output.put_line('done' || retx_string);
dbms_output.put_line('PL/SQL DII client return ===> ' || retx_string);
-- release the web service call
SYS.utl_dbws.release_service(service_);
return retx_string;
end email;

thsi is urgent anybody ????

Unable to pass xmlbeans object in weblogic web services using OEPE

Migrating Weblogic web services from Weblogic Workshop 10.3 to Oracle Enterprise for Eclipse...Passing xmlbean generated types in arguments of webservice call
How to work around the following errors? I do not have this error when in workshop 10.3 only in OEPE eclipse
"oracle.eclipse.tools.webservices.compiler.CompilationException: Errors: JAX-WS web services must not have xmlBean parameter or return type"
PLease note that I want DocType to be xmlbeans generated or inherited from org.apache.xmlbeans.XmlObject....
@WebMethod
     public void upload(String filename, DocType doc) {
Hi, I have legacy codes from Weblogic workshop 10.1 and 10.3.....
I am able to compile and run in Weblogic workshop 10.3 by passing the xmlbean generated DocType as arguments in the web services call.... but why am I not able to do this in Oracle Enterprise for Eclipse OEPE......
If I were to generate the web service from teh wsdl...it will generate it's own DocType.class in the jar files and not use the xmlbean generated class one....
How to get iOEPE to generate the classes in build\jws\ for
testWSService-annotation.xml
weblogic-webservices.xml etc like in workshop
How can I resolve this??? Am I stuck with Workshop on this?? How to work around??
Any help or clarifications would be much appreciated.
Inside testWS.java,
package ws;
import java.io.File;
import javax.jws.*;
import org.example.doc.DocType;
@WebService
public class testWS {
     @WebMethod
     public void upload(String filename, DocType doc) {
          try {
               doc.save(new File(filename));
          catch(Exception e) {
               System.out.println(e);
Inside xmlbeans generated DocType.java.....and DocTypeDocuments.java
* XML Type: DocType
* Namespace: http://www.example.org/doc
* Java type: org.example.doc.DocType
* Automatically generated - do not modify.
package org.example.doc;
* An XML DocType(@http://www.example.org/doc).
* This is a complex type.
public interface DocType extends org.apache.xmlbeans.XmlObject
public static final org.apache.xmlbeans.SchemaType type = (org.apache.xmlbeans.SchemaType)
org.apache.xmlbeans.XmlBeans.typeSystemForClassLoader(DocType.class.getClassLoader(), "schemaorg_apache_xmlbeans.system.testWSTypeSystem").resolveHandle("doctypec217type");
* Gets the "element1" element
java.lang.String getElement1();
* Gets (as xml) the "element1" element
org.apache.xmlbeans.XmlString xgetElement1();
* Sets the "element1" element
void setElement1(java.lang.String element1);
* Sets (as xml) the "element1" element
void xsetElement1(org.apache.xmlbeans.XmlString element1);
* Gets the "element2" element
java.lang.String getElement2();
* Gets (as xml) the "element2" element
org.apache.xmlbeans.XmlString xgetElement2();
* Sets the "element2" element
void setElement2(java.lang.String element2);
* Sets (as xml) the "element2" element
void xsetElement2(org.apache.xmlbeans.XmlString element2);
* A factory class with static methods for creating instances
* of this type.
public static final class Factory
public static org.example.doc.DocType newInstance() {
return (org.example.doc.DocType) org.apache.xmlbeans.XmlBeans.getContextTypeLoader().newInstance( type, null ); }
public static org.example.doc.DocType newInstance(org.apache.xmlbeans.XmlOptions options) {
return (org.example.doc.DocType) org.apache.xmlbeans.XmlBeans.getContextTypeLoader().newInstance( type, options ); }
/** @param xmlAsString the string value to parse */
public static org.example.doc.DocType parse(java.lang.String xmlAsString) throws org.apache.xmlbeans.XmlException {
return (org.example.doc.DocType) org.apache.xmlbeans.XmlBeans.getContextTypeLoader().parse( xmlAsString, type, null ); }
public static org.example.doc.DocType parse(java.lang.String xmlAsString, org.apache.xmlbeans.XmlOptions options) throws org.apache.xmlbeans.XmlException {
return (org.example.doc.DocType) org.apache.xmlbeans.XmlBeans.getContextTypeLoader().parse( xmlAsString, type, options ); }
/** @param file the file from which to load an xml document */
public static org.example.doc.DocType parse(java.io.File file) throws org.apache.xmlbeans.XmlException, java.io.IOException {
return (org.example.doc.DocType) org.apache.xmlbeans.XmlBeans.getContextTypeLoader().parse( file, type, null ); }
public static org.example.doc.DocType parse(java.io.File file, org.apache.xmlbeans.XmlOptions options) throws org.apache.xmlbeans.XmlException, java.io.IOException {
return (org.example.doc.DocType) org.apache.xmlbeans.XmlBeans.getContextTypeLoader().parse( file, type, options ); }
public static org.example.doc.DocType parse(java.net.URL u) throws org.apache.xmlbeans.XmlException, java.io.IOException {
return (org.example.doc.DocType) org.apache.xmlbeans.XmlBeans.getContextTypeLoader().parse( u, type, null ); }
public static org.example.doc.DocType parse(java.net.URL u, org.apache.xmlbeans.XmlOptions options) throws org.apache.xmlbeans.XmlException, java.io.IOException {
return (org.example.doc.DocType) org.apache.xmlbeans.XmlBeans.getContextTypeLoader().parse( u, type, options ); }
public static org.example.doc.DocType parse(java.io.InputStream is) throws org.apache.xmlbeans.XmlException, java.io.IOException {
return (org.example.doc.DocType) org.apache.xmlbeans.XmlBeans.getContextTypeLoader().parse( is, type, null ); }
public static org.example.doc.DocType parse(java.io.InputStream is, org.apache.xmlbeans.XmlOptions options) throws org.apache.xmlbeans.XmlException, java.io.IOException {
return (org.example.doc.DocType) org.apache.xmlbeans.XmlBeans.getContextTypeLoader().parse( is, type, options ); }
public static org.example.doc.DocType parse(java.io.Reader r) throws org.apache.xmlbeans.XmlException, java.io.IOException {
return (org.example.doc.DocType) org.apache.xmlbeans.XmlBeans.getContextTypeLoader().parse( r, type, null ); }
public static org.example.doc.DocType parse(java.io.Reader r, org.apache.xmlbeans.XmlOptions options) throws org.apache.xmlbeans.XmlException, java.io.IOException {
return (org.example.doc.DocType) org.apache.xmlbeans.XmlBeans.getContextTypeLoader().parse( r, type, options ); }
public static org.example.doc.DocType parse(javax.xml.stream.XMLStreamReader sr) throws org.apache.xmlbeans.XmlException {
return (org.example.doc.DocType) org.apache.xmlbeans.XmlBeans.getContextTypeLoader().parse( sr, type, null ); }
public static org.example.doc.DocType parse(javax.xml.stream.XMLStreamReader sr, org.apache.xmlbeans.XmlOptions options) throws org.apache.xmlbeans.XmlException {
return (org.example.doc.DocType) org.apache.xmlbeans.XmlBeans.getContextTypeLoader().parse( sr, type, options ); }
public static org.example.doc.DocType parse(org.w3c.dom.Node node) throws org.apache.xmlbeans.XmlException {
return (org.example.doc.DocType) org.apache.xmlbeans.XmlBeans.getContextTypeLoader().parse( node, type, null ); }
public static org.example.doc.DocType parse(org.w3c.dom.Node node, org.apache.xmlbeans.XmlOptions options) throws org.apache.xmlbeans.XmlException {
return (org.example.doc.DocType) org.apache.xmlbeans.XmlBeans.getContextTypeLoader().parse( node, type, options ); }
/** @deprecated {@link org.apache.xmlbeans.xml.stream.XMLInputStream} */
public static org.example.doc.DocType parse(org.apache.xmlbeans.xml.stream.XMLInputStream xis) throws org.apache.xmlbeans.XmlException, org.apache.xmlbeans.xml.stream.XMLStreamException {
return (org.example.doc.DocType) org.apache.xmlbeans.XmlBeans.getContextTypeLoader().parse( xis, type, null ); }
/** @deprecated {@link org.apache.xmlbeans.xml.stream.XMLInputStream} */
public static org.example.doc.DocType parse(org.apache.xmlbeans.xml.stream.XMLInputStream xis, org.apache.xmlbeans.XmlOptions options) throws org.apache.xmlbeans.XmlException, org.apache.xmlbeans.xml.stream.XMLStreamException {
return (org.example.doc.DocType) org.apache.xmlbeans.XmlBeans.getContextTypeLoader().parse( xis, type, options ); }
/** @deprecated {@link org.apache.xmlbeans.xml.stream.XMLInputStream} */
public static org.apache.xmlbeans.xml.stream.XMLInputStream newValidatingXMLInputStream(org.apache.xmlbeans.xml.stream.XMLInputStream xis) throws org.apache.xmlbeans.XmlException, org.apache.xmlbeans.xml.stream.XMLStreamException {
return org.apache.xmlbeans.XmlBeans.getContextTypeLoader().newValidatingXMLInputStream( xis, type, null ); }
/** @deprecated {@link org.apache.xmlbeans.xml.stream.XMLInputStream} */
public static org.apache.xmlbeans.xml.stream.XMLInputStream newValidatingXMLInputStream(org.apache.xmlbeans.xml.stream.XMLInputStream xis, org.apache.xmlbeans.XmlOptions options) throws org.apache.xmlbeans.XmlException, org.apache.xmlbeans.xml.stream.XMLStreamException {
return org.apache.xmlbeans.XmlBeans.getContextTypeLoader().newValidatingXMLInputStream( xis, type, options ); }
private Factory() { } // No instance of this class allowed
Edited by: user11079482 on Jan 1, 2010 2:09 AM

Ok just as I expected. So I guess I am left with the following two options
1) either I switched to using JAXB in my apps instaed of xmlbeans....
2) or if I still wanna use the old JAX-RPC web services to deploy on the Weblogic 10gR3 server i will have to create my own ant task jwsc directly......as shown below in your docs
Programming Web Services for WebLogic Server (ant tasks)
http://download.oracle.com/docs/cd/E13222_01/wls/docs92/webserv/anttasks.html
Getting Started With WebLogic Web Services Using JAX-RPC
http://download.oracle.com/docs/cd/E12840_01/wls/docs103/webserv_rpc/index.html
Will OEPE be supporting the old JAX-RPC anytime in the near future release? or have to create own build ant task to call jwsc ant task directly to compile JAX-RPC web services??

Error passing bool/categorical parameter into web service

Similar Messages

Maybe you are looking for