Error Photoshop can only decode FAX encoded images

I've been using an OCE flatbed scanner to digitise large documents. The software scans and saves the files as .tiffs with an LZW compression.
Using Photoshop CS3, I was able to open the files and correct the pixel ration. But, after trying to open the files with Photoshop CS5, I get an error message reading 'Photoshop can only decode FAX encoded images up to 32767 pixels wide or tall'. Seeing that CS3 opened them with no problem, is there any way to get CS5 to open them? They aren't CCITT compressed, so I'm not exactly sure why the FAX encoded error comes up...

They vary in size from around 150 KB to 2 MBs.
One file, for example, is 196 KB with dimensions 37795 x 22746 pixels.

Similar Messages

Photoshop CS5 can only decode fax encoded images up to 32767 pixels wide and tall

Dear Sir/Madam,
Can you please help me? I am scanning large drawings using an Xerox 6204 Large printer/scanner. The resolution is set at 600 and saved as .tif. Photoshop CS3 can open files with no problems, but CS5 gives me the following message:
"Photoshop can only decode fax encoded images up to 32767 pixels wide and tall"
I can also view with infarview and open with applications such as corel draw. Am I missing a plug-in or patch update? The same file can be opened in both Photoshop versions if I scan at resolution 300.
Your help is greatly appreciated.
All the best
Paulo

Hi Mylenium,
Many thanks for the prompt reply.
I agree with you... it's a little odd to save on fax tiff format... to be honest, it's not like we have an option on the matter... the XEROX 6204 Large Format Printer/Scanner either give us .Tif or .PDF options... Anyway's no problem with CS3 or other software like mentioned above... so even knowing it's a bit strange to use such format, still does not explain why on CS5 I get this error message. Furthermore if I open on CS3 and save as (same file name and same format .tif) I can then open on CS5!!!!
To my surprise, I did not know it was saving as a fax tif... all I get is tif. Even so if all other software including an older version of Photoshop can open it why CS5 can not? What is missing? As mentioned if scanned at 300 dpi it opens... Confused. Very confused!!
All the best
Paulo

I am trying to reinstall Dreamweaver CS3 from the CD after having computer issues. Now getting error "You can only install one Adobe product at a time. Please complete the other installation before attempting to install ......." There is no other Adobe

I am trying to reinstall Dreamweaver CS3 from the CD after having computer issues. Now getting error "You can only install one Adobe product at a time. Please complete the other installation before attempting to install ......." There is no other Adobe product installing. I have used the Adobe Cleaner Tool many times and uninstalled other Adobe Products but neither has worked. I have uninstalled/reinstalled this CD version of Dreamweaver several times when changing computers and after having computer issues. A google search of the problem suggested it may be an error related to the number of times I can reinstall this product due to licensing issues. Please help.

A google search of the problem suggested it may be an error related to the number of times I can reinstall this product due to licensing issues.
Absolutely not. You are misinterpreting things. The activation check never happens when just running the installer, only much later. It means what it says - there is another "install" pending/ active on your system, meaning somewhere there is an (invisible) process still blocking things. Either way, since you haven't provided any real technical info, we can't advise specifically. if you are on Windows, you may want to check your task manager and terminate any setup.exe and msiexec.exe processes plus potentially may need to manually fix/ delete some registry keys. For anything beyond that you will have to be much more specific.
Mylenium

Pixma MX 882 in if there is an answer machine on the line I can only receive faxes manually

I have a Pixma MX 882. I was told a while back by Canon Support that if there is an answer machine on the same line as the Canon that I can only receive faxes manually. Has Canon solved the problem.?
HP can do it, Brothers can do it, old Fax only machines can do it

Hi mort,
This is true...but let me clarify the setup for you. The answering machine must be connected directly to the printer. Your phone cord will come from the wall outlet, into your PIXMA MX882 (L port on your printer) and then out (from the phone port) to the answering machine. With your printer connected between the wall outlet and the answering machine, the printer can "listen in" for a fax on the line when the answering machine picks up. Be sure the printer is set to Tel Priority mode and the answering machine is set to pick up in about 3 rings.
If this didn't work, or if you have any other questions, please feel free to Contact Us!
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

CAD VIEW Error : "Status can only be set when all originals are stored"

Hi Friends,
I have Proe to SAP integrated and when I open Proe model in CAD VIEW and try to create a document it shows an error "Status can only be set when all originals are stored" Also I see that the model is not having Status in CAD VIEW.
When I double click on that object in CAD VIEW, it takes me to DIR creation screen with Document Type DES. Can someone help me in this ?
Rgds,
SM

Hello Sudharshan,
"Status can only be set when all originals are stored" Also I see that the model is not having Status in CAD VIEW.
This is error is indicating that your original CAD model is not checked in and as per your configuration you require the original to be checked in before moving to next status.
Please:
1. Check your document status network.
2. ensure that you have proper set up for the fields "check in" in the current status. This indicator should be set. This ensures that the document is automatically checked in before moving to the next status. This will solve your problem.
When I double click on that object in CAD VIEW, it takes me to DIR creation screen with Document Type DES. Can someone help me in this ?
Because of the above set up missing the original DIR is missing the original document and hence the system assumes you are creating a new DIR when you click on the object in CAD view.
regards,
N K

ERROR: jbd can only store block numbers in 32 bits.

I am running Oracle VM Server 2.2.1. When trying to format the following partition, an error is raised.
[root@vmserver08 ~]# cat /proc/partitions
major minor #blocks name
8 0 143247360 sda
8 1 104391 sda1
8 2 10482412 sda2
8 3 2096482 sda3
8 4 1 sda4
8 5 130560223 sda5
8 16 593755238301696 sdb
8 17 593755238301662 sdb1
[root@vmserver08 ~]# mkfs.ocfs2 -F -b 4k -C 32K -Tdatafiles -N10 /dev/sdb1
mkfs.ocfs2 1.4.3
Cluster stack: classic o2cb
Filesystem Type of datafiles
Filesystem label=
Block size=4096 (bits=12)
Cluster size=32768 (bits=15)
Volume size=19414325854208 (592478206 clusters) (4739825648 blocks)
18368 cluster groups (tail covers 32254 clusters, rest cover 32256 clusters)
Journal size=33554432
Initial number of node slots: 10
ERROR: jbd can only store block numbers in 32 bits. /dev/sdb1 can hold 4739825648 blocks which overflows this limit. If you have a new enough Ocfs2 with JBD2 support, you can try formatting with the "-Jblock64" option to turn on support for this size block device.
Otherwise, consider increasing the block size or decreasing the device size.
If I add the -Jblock64 option works, but dunno how can affect the performance of the cluster disk. By the way, block Size cannot be increased since 4096 is the maximum allowed.
[root@vmserver08 ~]# mkfs.ocfs2 -F -b 16k -Tdatafiles -N10 /dev/sdb1
mkfs.ocfs2: Specify a blocksize between 512 and 4096 in powers of 2
As far as I know, by default with block size = 4K you should be able to format a 16TB partition, am I wrong?
Any ideas?
Best regards,
Marc Caubet

Marc Caubet wrote:
8 16 593755238301696 sdbYeesh. I want your storage arrays. :) The biggest I've ever managed to see on my OVM installs is 8TB for a single partition.

Data merge with football tickets. Printing causes out of memory errors. Can only print 10 at a time!

Here's the deal. Printing football tickets for the local high school. 10 tickets per 8.5 x 11 sheet. All black and white. I couldn't data merge into one whole document of tickets because it was failing to do that. So, I end up with 3 documents. First two have 50 pages of tickets and the last has 37 pages.
When I go to print, I can only print 10 pages at a time or InDesign straight up crashes or I get an "Out of Memory" error which is bull because I've got plenty of ram available (unless it's complaining about lack of HD space for some reason)
Incredibly frustrating.
Each ticket has 3 images on it. Two of the images are the same. Those two images are about 103kb .ai files. Very very simple. The other image is a TIFF that is about 76kb. So there are 1000 .ai files / document and 500 TIFFs.
Here's a video I took of it ripping: http://www.youtube.com/watch?v=UCjvdmXuaYs&feature=c4-overview&list=UUf_1UFp80YLZJfCyIxXEg kg
Also, when printing, I have the Send Data set to Optimized Subsampling instead of "All". That's not seeming to help.
Any thoughts?
IDCS 5.5
OSX 10.8.4

I just ran a sample on my laptop.
AI file, duplicated, is 284k. Image is roughly 200k. The CSV has 2054 records, and the merged document with 10 per page is 250 megabytes. PDF is just under 50 megs.
This laptop has only 4 gigs memory but has a lot of free disk space. It took a good amount of time to do the merge, a bit longer to create the PDF-X1a PDF.
Mike

ERROR : You can only work in client 900

Hi,
There are 2 clients in the BI environment.
Client 200 & Client 900.
Client 900 is used for testing.
Client 200 is used for development environment.
We are able to use Client 900 without any problem.
But when we login in client 200 and execute t-code RSA1"
following error occurs.
"You can only work in client 900
Message no. BRAIN009
Diagnosis
Your SAP BW system can only operate in client 900.
Procedure
Log on in client 900."
Can someone suggest solution for this.
rgds
Prashant

hi,
check oss note 522569-BW: Working in several clients (especially APO 4.x/SCM 4.x)
and thread
Re: Is it posible to work with multiple clients in BW?
hope this helps.
522569
Symptom
You cannot work in several clients in the BW system or in a system that uses BW as a basis (for example: APO Demand Planning).
Other terms
MANDT, client, source system, APO, SCM, ERP, Bank Analyzer
Reason and Prerequisites
In BW, master data IDs and dimension IDs are taken from number ranges. The BW objects against which the number range intervals are client-specific are cross-client objects. As the IDs must be unique, these may only be determined in one client. This means that BW can only operate in one client.
The BW objects are cross-client. They can be accessed and changed to the same extent in all clients. BW is displayed identically in all clients. In particular, there is only one Myself source system as this is used to generate the change log for ODS objects. Therefore, when the Administrator Workbench is started, the system checks to see whether you are working in the same client in which the Myself source system was created.
Some extractors from the APO system only work in the client in which the data was created (this is due to the fact that the LiveCache is used). As the Myself connection does not change the client, the extraction of this data must be started in the same client in which the APO data was generated.
For more information about client-dependencies for SAP APO and SCM 4.x, refer to the paper "SAP APO 3.x & SAP SCM 4.0 Multiclient Capabilities" in http://service.sap.com/scm -> mySAP SCM Technology -> "Installation, Upgrade, Migration, System Copy, Client Dependencies". The direct link for the paper is: http://service.sap.com/~sapidb/011000358700006688312002.
Solution
Particularly in SCM/APO it can make sense to use several clients for BW in the SCM/APO system, because the SCM/APO Customizing is client-specific. CAUTION, this note only applies to SCM Releases as of 4.0. For Releases below SCM 4.0, see note 384057.
In SCM as of 4.0 (BW 3.0), it is possible without a BW modification to log on in several clients and to also use the BW functions in these. In addition to this note, you must also take some restrictions and other information into account. This information is maintained centrally in the paper mentioned at the beginning of the note.
BW 3.0B
           Import Support Package 2 for Release 3.0B (BW3.0B patch 02 or SAPKW30B02) into your BW system. The Support Package will be available once Note 493971 "SAPBWNews BW 3.0B Support Package 02", which describes this Support Package in more detail, has been released for customers.
Proceed as follows:
The default client must still appear in the BWMANDT field in the RSADMINA table. Under no circumstances must this entry be changed. Otherwise it may be impossible to use the data in all InfoCubes and all master data tables. Numbers are taken and only created in this client.
Using transaction SM59, create an RFC destination for this default client with the following attributes:
RFC destination (name)
Connection type:         R/3 connection
Client:                  Default client from the RSADMINA-BWMANDT table
The connection must have a password or it must be set as a Trusted System. It must be possible to log on using this connection without additional passwords being requested.
Enter this RFC connection in the BWMANDTRFC field of the RSADMINA table.
When you work in different clients, you must take the following restrictions into account:
BW releases lower than 3.5
BW does not support the connection of new source systems (also file source systems) outside the BW standard client. Only one "myself" source system can be created.
It is considered possible to connect a client other than the BW standard client to an external BW as a source system. Although you can do this using note 609167, this involves restrictions that are mentioned below in the "BW Release as of 3.5" section.
Proceed as follows if you want to upload data into your new client (also ODS update and file source systems). This is not valid if note 609167 has been implemented):
                     In your new client for all source systems, from which you wish to upload data into non-BW standard clients, create partner connections as an IDENTICAL copy (including names) of the partners in the BW standard client. If you are setting up the new client for the first time, you can use the client copier (transaction SCCL).
                     Create the BW background user (generally, BWREMOTE) with the S_BI-WHM_RFC and S_BI-WX_RFC profiles. Make sure that the name is the same as the name in the BW standard client.
BW releases as of 3.5
BW does not support the connection of new source systems (also file source systems) outside the BW standard client. Only one "myself" source system can be created.
The Administrator workbench can only be called in the BW standard client.
You cannot upload data into a client other than the BW standard client.
                    As of BW 3.5 with PI BASIS 2004.1 or higher, you can connect another source system besides the BW standard client as a separate source system to BW (extraction from another client within the system), provided the BW standard client and BW background user have been entered in the Myself destination. See note 538052.
Authorizations/roles
Like users, authorizations are also client-specific. If you work in several clients, you must ensure that the necessary authorizations and roles exist in the other clients.
Client copy
No client copy may be performed in the BW standard clients. This would destroy the versions of the number range intervals and thereby make the BW data inconsistent.

Error - You Can only resubmit requisitions of status returned rejected

HI All ,
When I am trying to change the requisitions , I am getting this error message .
You Can only resubmit requisitions of status returned rejected
For newly created requisitions(which are having staus APPROVED ), and PO (Which are having status APPROVED) . I can able to change the requisitions .
But when I am tryingto change the old requisitions means which are created an year ago that time I am gettign this error .
Can u please help me what would be the reason and how to change the requisitiosn.
Thanks
sai

964036 wrote:
HI All ,
When I am trying to change the requisitions , I am getting this error message .
You Can only resubmit requisitions of status returned rejected
For newly created requisitions(which are having staus APPROVED ), and PO (Which are having status APPROVED) . I can able to change the requisitions .
But when I am tryingto change the old requisitions means which are created an year ago that time I am gettign this error .
Can u please help me what would be the reason and how to change the requisitiosn.
Thanks
saiPlease see these docs.
Unable To Change Or Complete Other Users Requisitions In ''My Group's Requisitions'' [ID 308882.1]
Not Able To Change A Requisition Selected From Search Results [ID 332438.1]
iProcurement FAQ: IPREQV Requisition Status [ID 135035.1]
iProcurement FAQ for 11i: iProcurement Approvals and Workflow [ID 135613.1]
Thanks,
Hussein

Photoshop can't print legal-size image to legal-size paper

I go through a lot of sketch stages to get to a final picture, and I sometimes print on legal paper. My Brother printer does fine at that with Apple Pages, MSWord, Acrobat, and Illustrator, but with Photoshop there's a problem. I set up a legal-size image in PS, go through all the settings I can find for printing to a non-letter-format sheet, hit print, and what I get is a letter-size patch of image on a legal-size sheet. Clearly, either I am missing something or PS is missing something. Any ideas or suggestions?

The problem persists. This has gone on for months, but now I've updated to OSX 10.9.1 and the latest Brother printer drivers. I still get legal sheets bearing letter-sized information. So far, the only answer anyone has had is to check every possible place where the paper size is defined. Right. How many of those are there? 2? 3? 4? See attached screen grab: I don't know what it's doing there, but the black patch at the bottom of the image corresponds to the cutoff area on the print. It shows up when I check the box "Print selected area". Otherwise, all the sizes and labels i can find are legal-paper sizes and labels. So how do I get rid of the black box? Note that, below, the "Print selected area" box is unchecked

Finder -600 error. Can only open Finder in background (open -g /path/) after force quit

Hey there,
I had multiple instances of finder and it kept relaunching so I force killed it from activity monitor. Now Finder, disk image mounter, and trash are all non functional from the front end and the desktop shortcuts are gone. After that if you tried to open it with the icon on the dock (right click icon > open) or in terminal it gave error code -600, the application "Finder" can't be opened. This is not the same as -10814, which i get only if i try to open it as a bundle (open -b Finder).
I can run Finder in the background using open -g /path/ and the desktop restores and I can get to trash and finder with right clicks from dock icons. =/
And that's all I got. I don't know a whole lot else about the system and I am kind of afraid to restart.
If it matters, I recently had a weird hardware thing where my keyboard, trackpad, and all peripheral usb mice/keyboards would not work and I had to do recovery because recovery mode was the only way I could use my mouse/keyboard.
Thanks for any insight!

Do a backup.
In Finder hold down the option/alt key while selecting the Go menu item. Select Library. Then go to Preferences/com.apple.finder.plist. Move the .plist to your desktop.
Restart the computer, and test. If it works okay, delete the plist from the desktop.
If the same, return the .plist to where you got it from, overwriting the newer ones.
If you want to make your user library permanently visible, run the below command in Applications/Utilities/Terminal.
chflags nohidden ~/Library/
You will need to do that after any updates.

Can only see text and image outlines

I am new and got stuck!
When I run the fla, it runs fine. However I have hit some setting and all I can see is the texts and image outlines...
Here are some screen shots:
This is what it looks like when i run it:
Please help! its probably the most fundamental thing ever but I am stuck and it is hot and I'm frustrated. Thank-you

Your timeline is set to outline view. At the top of the timeline, in the section where the names of each layer are shown, there are three icons: an eye, a lock and a box. Click on the box icon to switch between outline and normal view.

Is there a solution to Photoshop CS3ex only opening jpg & tif images in plug-in "RAW"?

Using the Preference for File Handling, if Adobe 'Prefer Camera Raw" for JPEG not checked, program shuts down by Windows Problem Error. Uninstalled and reinstalled Photoshop twice.

Thanks for the quick reply.
......BUT didn't correct the problem
Also I went back to Photoshop and unchecked "always open jpg with camera raw settings and the program as usual crashed with the error message "Adobe Photoshop cs3 has stopped working etc."
This all started without warning weeks ago which I blame on these automatic updates by windows.
Since then I've easily spent a week chasing possibilities including twice deleting and reinstalling the programs in the Suite.
Additionally there is something else going on.....at start up I am instructed to restart for upload updates to install which doesn't work either.
After doing the total reinstalls, I had to resort to downloading updates from the Adobe Site as updates from the different programs required uselessly restarting the computer. All a kind of dominos effect after the total reinstalls and having to do upgrades from Adobe and not from each of the program's update option.
At least it "works" with the Raw settings.
Jackh

Moving images from ip4 albums to ip5c ? can only seem to move images in the camera roll

I,m trying to move images from an iphone 4 ( camera roll and other albums) to a new iphone 5c.
Cannot seem to move the album images over....
Is there an easy way to do this ?
regards

Photos NOT in your camera roll got onto your iPhone by synching from your computer. You need to synch those very same photos from your computer to your new phone. You don't move them from one phone to another.

How can I work with two images at the same time?

I have downloaded Photoshop Elements 10 and I can not find the buttons for Minimize or Reset for the image. If I rightclick the miniature those options are grey. If I open two images so I have two miniatures in the holder and then go to Windows and Images the option Show Overlapping is grey but I can show Side by side. Then I can only shut down the images.
Thanks for help
Bibbi

Open the Editor and on the menu bar click:
Edit à Preferences à General
Check the box “Allow Floating documents in Full Edit Mode” and click OK.

Error Photoshop can only decode FAX encoded images

Similar Messages

Maybe you are looking for