Error reading data from the MS Dos Console.

Hi,
We have a legacy application which is launched via a 3rd-party Telnet Server - the app acts as a remote shell for an RF device. The system has been functioning for many years but now we have migrated to Server 2012 the system no longer launches.
The RF device successfully connects to the telnet server, logs-in with embedded credentails but drops the connection when the shell application is launched.
The server has the following Application error
Error reading data from the MS Dos Console.
The pipe has been ended. 109 (0x6d)
The application can successfully be launched locally outside of the shell on the server. The error is reproducable across RF devices and desktop telnet connections.
The firewalls are off.
Are there some additional protections in Server 2012 which would cause the pipe-based link to be stopped when launching the exe? Am I missing something? The 3rd-party telnet server is certified for Server 2012.
Thnak you

I'd ask in the
Windows Server General Forum, or ask the third party vendor.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer
My Blog: http://unlockpowershell.wordpress.com
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ("6B61726C6D69747363686B65406D742E6E6574"-split"(?<=\G.{2})",19|%{[char][int]"0x$_"})

Similar Messages

Server error: "The attempt to read data from the server '(null)' failed"

Multiple times during each day my client (Mail.app) puts up a little exclamation mark "!" next to the mail account hosted on our Leopard Server. Clicking on this little alert icon pops up a message that reads:
+There may be a problem with the mail server or network. Verify the settings for account “Leopard Server Account” or try again.+
+The server returned the error: The attempt to read data from the server “(null)” failed.+
I can make the "!" go away by choosing Mailbox>Synchronize>Leopard Server Account. And everything seems peachy but it inevitably pops up again in another hour or two. It's annoying because I'm not sure if mail is getting through or not when the "!" is up.
Any ideas why this is happening?

MY SOLUTION REPOSTED FROM ANOTHER THREAD:
I've just solved a similar issue.
I have a dedicated server running Plesk 9.5 and when I upgraded to iLife 11 and Snow Leopard this error appeared. I could quickly click "get mail" and I'd get all my mail, but only 3-4 of my 9 mail accounts would connect. Theo others would have the error:
"The server error encountered was: The attempt to read data from the server..."
I found solutions for those using IMAP mail:
modify the /etc/courier-imap/imapd configuration file and change MAXDAEMONS from 40 to 80 and MAXPERIP from 4 to 40. This allows all the machines behind my home firewall to connect to multiple accounts on the e-mail server with mailbox caching enabled.
I'd made this change on my server but it didn't seem to have any effect. It dawned on me that I'm using POP, not IMAP. So I found in /etc/courier-imap/pop3d the same settings. I changed the MAXDAEMONS from 40 to 80 and MAXPERIP from 4 to 40 and voila, all my connections concurrently worked.
This has taken me more than two days to fix and I hope posting this helps someone else with the same issue.

TcpListener not working on Azure: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host

Hi Everybody,
i'm playing a little bit with Windows Azure and I'm blocked with a really simple issue (or maybe not).
I've created a Cloud Service containing one simple Worker Role. I've configured an EndPoint in the WorkerRole configuration, which allows Input connections via tcp on port 10100.
Here the ServiceDefinition.csdef file content:
<?xml version="1.0" encoding="utf-8"?>
<ServiceDefinition name="EmacCloudService" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceDefinition" schemaVersion="2014-01.2.3">
<WorkerRole name="TcpListenerWorkerRole" vmsize="Small">
<Imports>
<Import moduleName="Diagnostics" />
<Import moduleName="RemoteAccess" />
<Import moduleName="RemoteForwarder" />
</Imports>
<Endpoints>
<InputEndpoint name="Endpoint1" protocol="tcp" port="10100" />
</Endpoints>
</WorkerRole>
</ServiceDefinition>
This WorkerRole is just creating a TcpListener object listening to the configured port (using the RoleEnvironment instance) and waits for an incoming connection. It receives a message and returns a hardcoded message (see code snippet below).
namespace TcpListenerWorkerRole
using System;
using System.Net;
using Microsoft.WindowsAzure.ServiceRuntime;
using System.Net.Sockets;
using System.Text;
using Roche.Emac.Infrastructure;
using System.IO;
using System.Threading.Tasks;
using Microsoft.WindowsAzure.Diagnostics;
using System.Linq;
public class WorkerRole : RoleEntryPoint
public override void Run()
// This is a sample worker implementation. Replace with your logic.
LoggingProvider.Logger.Info("TcpListenerWorkerRole entry point called");
TcpListener listener = null;
try
listener = new TcpListener(RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint);
listener.ExclusiveAddressUse = false;
listener.Start();
LoggingProvider.Logger.Info(string.Format("TcpListener started at '{0}:{1}'", RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint.Address, RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint.Port));
catch (SocketException ex)
LoggingProvider.Logger.Exception("Unexpected exception while creating the TcpListener", ex);
return;
while (true)
Task.Run(async () =>
TcpClient client = await listener.AcceptTcpClientAsync();
LoggingProvider.Logger.Info(string.Format("Client connected. Address='{0}'", client.Client.RemoteEndPoint.ToString()));
NetworkStream networkStream = client.GetStream();
StreamReader reader = new StreamReader(networkStream);
StreamWriter writer = new StreamWriter(networkStream);
writer.AutoFlush = true;
string input = string.Empty;
while (true)
try
char[] receivedChars = new char[client.ReceiveBufferSize];
LoggingProvider.Logger.Info("Buffer size: " + client.ReceiveBufferSize);
int readedChars = reader.Read(receivedChars, 0, client.ReceiveBufferSize);
char[] validChars = new char[readedChars];
Array.ConstrainedCopy(receivedChars, 0, validChars, 0, readedChars);
input = new string(validChars);
LoggingProvider.Logger.Info("This is what the host sent to you: " + input+". Readed chars=" + readedChars);
try
string orderResultFormat = Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\xB")) + @"MSH|^~\&|Instrument|Laboratory|LIS|LIS Facility|20120427123212+0100||ORL^O34^ORL_O34| 11|P|2.5.1||||||UNICODE UTF-8|||LAB-28^IHE" + Environment.NewLine + "MSA|AA|10" + Environment.NewLine + @"PID|||patientId||""""||19700101|M" + Environment.NewLine + "SPM|1|sampleId&ROCHE||ORH^^HL70487|||||||P^^HL70369" + Environment.NewLine + "SAC|||sampleId" + Environment.NewLine + "ORC|OK|orderId|||SC||||20120427123212" + Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\x1c\x0d"));
writer.Write(orderResultFormat);
catch (Exception e)
LoggingProvider.Logger.Exception("Unexpected exception while writting the response", e);
client.Close();
break;
catch (Exception ex)
LoggingProvider.Logger.Exception("Unexpected exception while Reading the request", ex);
client.Close();
break;
}).Wait();
public override bool OnStart()
// Set the maximum number of concurrent connections
ServicePointManager.DefaultConnectionLimit = 12;
DiagnosticMonitor.Start("Microsoft.WindowsAzure.Plugins.Diagnostics.ConnectionString");
RoleEnvironment.Changing += RoleEnvironment_Changing;
return base.OnStart();
private void RoleEnvironment_Changing(object sender, RoleEnvironmentChangingEventArgs e)
// If a configuration setting is changing
LoggingProvider.Logger.Info("RoleEnvironment is changing....");
if (e.Changes.Any(change => change is RoleEnvironmentConfigurationSettingChange))
// Set e.Cancel to true to restart this role instance
e.Cancel = true;
As you can see, nothing special is being done. I've used the RoleEnvironment.CurrentRoleInstance.InstanceEndpoints to retrieve the current IPEndpoint.
Running the Cloud Service in the Windows Azure Compute Emulator everything works fine, but when I deploy it in Azure, then I receive the following Exception:
2014-08-06 14:55:23,816 [Role Start Thread] INFO EMAC Log - TcpListenerWorkerRole entry point called
2014-08-06 14:55:24,145 [Role Start Thread] INFO EMAC Log - TcpListener started at '100.74.10.55:10100'
2014-08-06 15:06:19,375 [9] INFO EMAC Log - Client connected. Address='196.3.50.254:51934'
2014-08-06 15:06:19,375 [9] INFO EMAC Log - Buffer size: 65536
2014-08-06 15:06:45,491 [9] FATAL EMAC Log - Unexpected exception while Reading the request
System.IO.IOException: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. ---> System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host
at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
--- End of inner exception stack trace ---
at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
at System.IO.StreamReader.ReadBuffer(Char[] userBuffer, Int32 userOffset, Int32 desiredChars, Boolean& readToUserBuffer)
at System.IO.StreamReader.Read(Char[] buffer, Int32 index, Int32 count)
at TcpListenerWorkerRole.WorkerRole.<>c__DisplayClass0.<<Run>b__2>d__0.MoveNext() in C:\Work\Own projects\EMAC\AzureCloudEmac\TcpListenerWorkerRole\WorkerRole.cs:line 60
I've already tried to configure an internal port in the ServiceDefinition.csdef file, but I get the same exception there.
As you can see, the client can connect to the service (the log shows the message: Client connected with the address) but when it tries to read the bytes from the stream, it throws the exception.
For me it seems like Azure is preventing the retrieval of the message. I've tried to disable the Firewall in the VM in Azure and the same continues happening.
I'm using Windows Azure SDK 2.3
Any help will be very very welcome!
Thanks in advance!
Javier
En caso de que la respuesta te sirva, porfavor, márcala como válida
Muchas gracias y suerte!
Javier Jiménez Roda
Blog: http://jimenezroda.wordpress.com

hi Javier,
I changed your code like this:
private AutoResetEvent connectionWaitHandle = new AutoResetEvent(false);
public override void Run()
TcpListener listener = null;
try
listener = new TcpListener(
RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint"].IPEndpoint);
listener.ExclusiveAddressUse = false;
listener.Start();
catch (SocketException se)
return;
while (true)
IAsyncResult result = listener.BeginAcceptTcpClient(HandleAsyncConnection, listener);
connectionWaitHandle.WaitOne();
The HandleAsync method is your "While (true)" code:
private void HandleAsyncConnection(IAsyncResult result)
TcpListener listener = (TcpListener)result.AsyncState;
TcpClient client = listener.EndAcceptTcpClient(result);
connectionWaitHandle.Set();
NetworkStream netStream = client.GetStream();
StreamReader reader = new StreamReader(netStream);
StreamWriter writer = new StreamWriter(netStream);
writer.AutoFlush = true;
string input = string.Empty;
try
char[] receivedChars = new char[client.ReceiveBufferSize];
// LoggingProvider.Logger.Info("Buffer size: " + client.ReceiveBufferSize);
int readedChars = reader.Read(receivedChars, 0, client.ReceiveBufferSize);
char[] validChars = new char[readedChars];
Array.ConstrainedCopy(receivedChars, 0, validChars, 0, readedChars);
input = new string(validChars);
// LoggingProvider.Logger.Info("This is what the host sent to you: " + input + ". Readed chars=" + readedChars);
try
string orderResultFormat = Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\xB")) + @"MSH|^~\&|Instrument|Laboratory|LIS|LIS Facility|20120427123212+0100||ORL^O34^ORL_O34| 11|P|2.5.1||||||UNICODE UTF-8|||LAB-28^IHE" + Environment.NewLine + "MSA|AA|10" + Environment.NewLine + @"PID|||patientId||""""||19700101|M" + Environment.NewLine + "SPM|1|sampleId&ROCHE||ORH^^HL70487|||||||P^^HL70369" + Environment.NewLine + "SAC|||sampleId" + Environment.NewLine + "ORC|OK|orderId|||SC||||20120427123212" + Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\x1c\x0d"));
writer.Write(orderResultFormat);
catch (Exception e)
// LoggingProvider.Logger.Exception("Unexpected exception while writting the response", e);
client.Close();
catch (Exception ex)
//LoggingProvider.Logger.Exception("Unexpected exception while Reading the request", ex);
client.Close();
Please try it. For this error message, I suggest you could refer to this thread (http://stackoverflow.com/questions/6173763/using-windows-azure-to-use-as-a-tcp-server
) and this post (http://stackoverflow.com/a/5420788).
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Unable to read data from the SAP Service Marketplace issue

Good morning, experts.
I´ve just installed the SAP Download Manager, but I can´t get connected to Marketplace.
First I tried downloading a file I could see in my Basket Download. Then I deleted it from the basket so I could test only the connection. In both situations I got the same error message: "Unable to read data from the SAP Service Marketplace (...)".
It is probably due to wrong settings, but I can´t figure it out. My settings are:
Address: https://websmp205.sap-ag.de/
User name: S0005951541
Password: (my password)
Proxy (my proxy settings)
Any ideas?

Thanks for your answer.
I can see my download basket online. I realize I didn´t delete the items so I could test purely the connection. I am going to do it again.
I found out I dind´t have permission to download those items, and with the right permission I could download them directly online.
As long as I have more information I am going to repost this issue on a new forum.
Thanks.

The attempt to read data from the server failed

Today I was looking into an error with several IMAP accounts in Apple Mail:
+The attempt to read data from the server "<<servername.tld>>" failed.+
At first I thought this was an Apple Mail problem, as the accounts in question seemed to work just fine when not used in combination. One possible answer to this problem is rather short:
Apple Mail uses IMAP caching, which uses more than 4 connections at the same time to the mail server. Some mail servers (like courier-imap in its default configuration) do not allow that much connections from the same IP address. The more accounts you are trying to connect to at the same time raises this number of connections. Meaning while you could probably check one account for new mails, the second will ultimately fail for no obvious reasons. The only solution to this problem is to raise the connections allowed by your IMAP server software. this solution only applies to people who have root access to their mail server.
in courier-imap you have to edit /etc/courier-imap/imapd
and change MAXPERIP=4 to a higher number (5 to 10 times the number of accounts you want to check simultaneously)
and change MAXDAEMONS=40 to a higher number (with only one user 200 might work, whereas if you serve multiple users, something like 500 or higher might be better suited).
of course increasing the numbers increases load on your server. this is why there are these restrictions in place.

MY SOLUTION REPOSTED FROM ANOTHER THREAD:
I've just solved a similar issue.
I have a dedicated server running Plesk 9.5 and when I upgraded to iLife 11 and Snow Leopard this error appeared. I could quickly click "get mail" and I'd get all my mail, but only 3-4 of my 9 mail accounts would connect. Theo others would have the error:
"The server error encountered was: The attempt to read data from the server..."
I found solutions for those using IMAP mail:
modify the /etc/courier-imap/imapd configuration file and change MAXDAEMONS from 40 to 80 and MAXPERIP from 4 to 40. This allows all the machines behind my home firewall to connect to multiple accounts on the e-mail server with mailbox caching enabled.
I'd made this change on my server but it didn't seem to have any effect. It dawned on me that I'm using POP, not IMAP. So I found in /etc/courier-imap/pop3d the same settings. I changed the MAXDAEMONS from 40 to 80 and MAXPERIP from 4 to 40 and voila, all my connections concurrently worked.
This has taken me more than two days to fix and I hope posting this helps someone else with the same issue.

Error reading data from static cursor cache.

Hi,
Does anyone know what causes this error below. It just started happening out of the blue. I'm running Apache Tomcat 4.1 on Win 2000 server with MS SQL Server 2000 database.
Error:
java.sql.SQLException: [Microsoft][SQLServer JDBC Driver]Error reading data from static cursor cache.
Thanks,
TR

hi,
i had a similar sort of error, something along the lines of "error setting up static cursor cache" using the SQL JDBC drivers on Win2K. i deleted the file entries in the TEMP folder of c:\documents and settings\<user>\Local Settings\TEMP and everything was cool after it. i'm not sure what the exact issue is (probably something like maximum folder size had been reached). i ran the FileMon utility from www.sysinternals.com and it reported a DISK_FULL error on a temporary file being read by the process. to cut a long story short, everything is NOW cool.
cheer,
dara

HTTP-500 Error Reading Data from Client!!

I'm trying to create a page where by clients are able to contact us through the portal. So, it's a pretty basic form where I have a text box for the subject, and a text area for the message body.
My problem is when the message body is over a certain size, I'm getting a "portlet cannot be contacted" on my screen. The Apache log comes up with the error:
[error] mod_plsql: /pls/portal/!PORTAL.wwpob_page.show HTTP-500 Error Reading Data from Client!!
I'm not using a windows OS, so the bug that has been talked about previously talked about shouldn't be the problem.
Also, I am using a POST rather than a GET, so I don't think it has to do with the browser (and I have tested this on Firefox and IE 5.5 and IE 6).
Would appreciate any advise.
Thanks, Nicky

Are you using SSL? Maybe, it has to do with it. I encountered a similar problem. It turned up that this read error occurred inside Apache and was caused by a nonstandard-SSL-request by Internet Explorer. te remedy was to add this to the Apache configuration:
SetEnvIf User-Agent ".*MSIE.*" \
nokeepalive ssl-unclean-shutdown downgrade-1.0 force-response-1.0
It tells Apache to switch to HTTP/1.0 and to never keep open socket connections with MSIE on SSL connections.
Lycka till!

Attempt to read data from the server failed...

I'm getting the following error on one of my email accounts:
+There may be a problem with the mail server or network. Verify the settings for account “[my account]” or try again.+
+The server returned the error: The attempt to read data from the server “[my account]” failed.+
I'd like to find out more about the error, so that I can start to track this down and see if there is a problem with the mail server settings, or if the problem is on my end.
I don't see any reference to this error in the logs – would it be somewhere else?

I've just solved a similar issue.
I have a dedicated server running Plesk 9.5 and when I upgraded to iLife 11 and Snow Leopard this error appeared. I could quickly click "get mail" and I'd get all my mail, but only 3-4 of my 9 mail accounts would connect. Theo others would have the error:
The server error encountered was: The attempt to read data from the server...
I found solutions for those using IMAP mail:
modify the /etc/courier-imap/imapd configuration file and change MAXDAEMONS from 40 to 80 and MAXPERIP from 4 to 40. This allows all the machines behind my home firewall to connect to multiple accounts on the e-mail server with mailbox caching enabled.
I'd made this change on my server but it didn't seem to have any effect. It dawned on me that I'm using POP, no IMAP. So I found in /etc/courier-imap/pop3d the same settings. I changed the MAXDAEMONS from 40 to 80 and MAXPERIP from 4 to 40 and voila, all my connections concurrently worked.
This has taken me more than two days to fix and I hope posting this helps someone else with the same issue.

TT16060: Failed to read data from the network. select() timed out

hi!
i am working on active standby pair.....i created
[activedsn]
Driver=/d01/oracle/tt70/TimesTen/tt70/lib/libtten.so
DataStore=/d01/oracle/tt70/TimesTen/tt70/info/activedsn
DatabaseCharacterSet=WE8MSWIN1252
PermSize=10
[standbydsn]
Driver=/d01/oracle/tt70/TimesTen/tt70/lib/libtten.so
DataStore=/d01/oracle/tt70/TimesTen/tt70/info/standbydsn
DatabaseCharacterSet=WE8MSWIN1252
PermSize=10
[sub3]
Driver=/d01/oracle/tt70/TimesTen/tt70/lib/libtten.so
DataStore=/d01/oracle/tt70/TimesTen/tt70/info/sub3
DatabaseCharacterSet=WE8MSWIN1252
PermSize=10
replication schemes; .............all are on same hosts..........
activedsn datastore.............
Command> create table readtab(a number not null primary key,b varchar2(31));
Command> insert into readtab values(101,'aaaa');
1 row inserted.
Command> commit;
command>create active standby pair activedsn on "tap2.test3.com",standbydsn on "tap2.test3.com" return receipt subscriber sub3 on "tap2.test3.com";
standbydsn datastore..........
command>ttrepadmin -duplicate -from activedsn -host "tap2.test3.com" -uid adm -pwd adm "dsn=standbydsn";
sub3 datastore..........
command>ttrepadmin -duplicate -from standbydsn -host "tap2.test3.com" -uid adm -pwd adm "dsn=sub3";
now they are working fine when i insert something from activedsn it is replicated to standbydsn and from standbydsn to sub3 ......
problem:
but when i test "Recovering from a failure of the standby master data store"
i ttdestroy standbydsn..............and on activedsn i executed
command>call ttrepstatesave('failed','standbydsn','tap2.test3.com');
after that all updates from activedsn were replicated to sub3....in the meanwhile i again duplicated standbydsn from activedsn
command>ttrepadmin -duplicate -from activedsn -host "tap2.test3.com" -uid adm -pwd adm "dsn=standbydsn";
now what happens updates from activedsn are replicated to standbydsn but no updates are replicated to sub3 it is giving error
15:24:29.29 Warn: REP: 7077: SUB3:receiver.c(1931): TT16060: Failed to read data from the network. select() timed out
15:29:36.09 Warn: REP: 7008: STANDBYDSN:receiver.c(1931): TT16060: Failed to read data from the network. TimesTen replication agent is stopping
replication agents for all are running.............
please helppppp..........
Edited by: Muhammad.Usman on Oct 13, 2009 2:57 AM
Edited by: Muhammad.Usman on Oct 13, 2009 3:08 AM

[timesten@tap2 bin]$ ttrepadmin -showconfig activedsn
Self host "TAP2.TEST3.COM", port auto, name "ACTIVEDSN", LSN 0/916688, timeout 120, threshold 0
List of subscribers
Peer name Host name Port State Proto
SUB3 TAP2.TEST3.COM Auto Start 24
Last Msg Sent Last Msg Recv Latency TPS RecordsPS
00:00:03 - -1.00 -1 -1
Peer name Host name Port State Proto
STANDBYDSN TAP2.TEST3.COM Auto Start 24
Last Msg Sent Last Msg Recv Latency TPS RecordsPS
00:00:03 00:00:04 -1.00 -1 -1
List of objects and subscriptions
Table details
Table : ADM.READTAB Timestamp updates : -
Master Name Subscriber name
STANDBYDSN SUB3
STANDBYDSN ACTIVEDSN
Table details
Table : ADM.READTAB Timestamp updates : -
Master Name Subscriber name
ACTIVEDSN SUB3
ACTIVEDSN STANDBYDSN
Datastore details
Master Name Subscriber name
STANDBYDSN SUB3
STANDBYDSN ACTIVEDSN
Datastore details
Master Name Subscriber name
ACTIVEDSN SUB3
ACTIVEDSN STANDBYDSN
[timesten@tap2 bin]$ ttrepadmin -showstatus activedsn
Replication Agent Status as of: 2009-10-13 20:42:02
DSN : activedsn
Process ID : 19000 (Started)
Replication Agent Policy : manual
Host : TAP2.TEST3.COM
RepListener Port : 58698 (AUTO)
Last write LSN : 0.973840
Last LSN forced to disk : 0.973840
Replication hold LSN : 0.968456
Replication Peers:
Name : SUB3
Host : TAP2.TEST3.COM
Port : 58371 (AUTO) (Connected)
Replication State : STARTED
Communication Protocol : 24
Name : STANDBYDSN
Host : TAP2.TEST3.COM
Port : 59000 (AUTO) (Connected)
Replication State : STARTED
Communication Protocol : 24
TRANSMITTER thread(s):
For : SUB3
Start/Restart count : 6
Send LSN : 0.971432
Transactions sent : 2
Total packets sent : 158
Tick packets sent : 112
MIN sent packet size : 48
MAX sent packet size : 568
AVG sent packet size : 59
Last packet sent at : 20:42:00
Total Packets received: 158
MIN rcvd packet size : 48
MAX rcvd packet size : 96
AVG rcvd packet size : 64
Last packet rcvd'd at : 20:42:00
TRANSMITTER thread(s):
For : STANDBYDSN
Start/Restart count : 4
Send LSN : 0.971432
Transactions sent : 2
Total packets sent : 106
Tick packets sent : 84
MIN sent packet size : 48
MAX sent packet size : 560
AVG sent packet size : 63
Last packet sent at : 20:42:00
Total Packets received: 104
MIN rcvd packet size : 48
MAX rcvd packet size : 96
AVG rcvd packet size : 66
Last packet rcvd'd at : 20:42:00
Most recent errors (max 5):
TT16122 in transmitter.c (line 3313) at 20:28:28 on 10-13-2009
TT16121 in transmitter.c (line 3048) at 20:28:28 on 10-13-2009
TT16060 in transmitter.c (line 5028) at 20:33:59 on 10-13-2009
TT16122 in transmitter.c (line 3313) at 20:33:59 on 10-13-2009
TT16121 in transmitter.c (line 3048) at 20:33:59 on 10-13-2009
RECEIVER thread(s):
For : STANDBYDSN
Start/Restart count : 1
Transactions received : 0
Total packets sent : 33
Tick packets sent : 0
MIN sent packet size : 48
MAX sent packet size : 68
AVG sent packet size : 67
Last packet sent at : 20:42:00
Total Packets received: 33
MIN rcvd packet size : 48
MAX rcvd packet size : 135
AVG rcvd packet size : 51
Last packet rcvd'd at : 20:42:00
[timesten@tap2 bin]$
[timesten@tap2 bin]$ ttrepadmin -showstatus standbydsn
Replication Agent Status as of: 2009-10-13 20:42:35
DSN : standbydsn
Process ID : 19102 (Started)
Replication Agent Policy : manual
Host : TAP2.TEST3.COM
RepListener Port : 59000 (AUTO)
Last write LSN : 0.1007904
Last LSN forced to disk : 0.1007904
Replication hold LSN : 0.1002472
Replication Peers:
Name : SUB3
Host : TAP2.TEST3.COM
Port : 58371 (AUTO) (Connected)
Replication State : STARTED
Communication Protocol : 24
Name : ACTIVEDSN
Host : TAP2.TEST3.COM
Port : 58698 (AUTO) (Connected)
Replication State : STARTED
Communication Protocol : 24
TRANSMITTER thread(s):
For : SUB3
Start/Restart count : 2
Send LSN : 0.1005496
Transactions sent : 1
Total packets sent : 48
Tick packets sent : 33
MIN sent packet size : 48
MAX sent packet size : 568
AVG sent packet size : 65
Last packet sent at : 20:42:30
Total Packets received: 48
MIN rcvd packet size : 48
MAX rcvd packet size : 96
AVG rcvd packet size : 64
Last packet rcvd'd at : 20:42:30
Most recent errors (max 5):
TT16229 in transmitter.c (line 6244) at 20:38:01 on 10-13-2009
TRANSMITTER thread(s):
For : ACTIVEDSN
Start/Restart count : 1
Send LSN : 0.1005496
Transactions sent : 0
Total packets sent : 36
Tick packets sent : 34
MIN sent packet size : 48
MAX sent packet size : 135
AVG sent packet size : 50
Last packet sent at : 20:42:30
Total Packets received: 36
MIN rcvd packet size : 48
MAX rcvd packet size : 68
AVG rcvd packet size : 67
Last packet rcvd'd at : 20:42:30
RECEIVER thread(s):
For : ACTIVEDSN
Start/Restart count : 1
Transactions received : 1
Total packets sent : 42
Tick packets sent : 0
MIN sent packet size : 48
MAX sent packet size : 96
AVG sent packet size : 66
Last packet sent at : 20:42:30
Total Packets received: 47
MIN rcvd packet size : 48
MAX rcvd packet size : 190
AVG rcvd packet size : 58
Last packet rcvd'd at : 20:42:30
[timesten@tap2 bin]$
[timesten@tap2 bin]$ ttrepadmin -showstatus sub3
Replication Agent Status as of: 2009-10-13 20:43:05
DSN : sub3
Process ID : 18898 (Started)
Replication Agent Policy : manual
Host : TAP2.TEST3.COM
RepListener Port : 58371 (AUTO)
Last write LSN : 0.707088
Last LSN forced to disk : 0.707088
Replication hold LSN : -1.-1
Replication Peers:
Name : ACTIVEDSN
Host : TAP2.TEST3.COM
Port : 0 (AUTO)
Replication State : STARTED
Communication Protocol : 24
Name : STANDBYDSN
Host : TAP2.TEST3.COM
Port : 0 (AUTO)
Replication State : STARTED
Communication Protocol : 24
RECEIVER thread(s):
For : ACTIVEDSN
Start/Restart count : 1
Transactions received : 0
Total packets sent : 46
Tick packets sent : 0
MIN sent packet size : 48
MAX sent packet size : 96
AVG sent packet size : 65
Last packet sent at : 20:43:00
Total Packets received: 46
MIN rcvd packet size : 48
MAX rcvd packet size : 134
AVG rcvd packet size : 51
Last packet rcvd'd at : 20:43:00
RECEIVER thread(s):
For : STANDBYDSN
Start/Restart count : 1
Transactions received : 1
Total packets sent : 45
Tick packets sent : 0
MIN sent packet size : 48
MAX sent packet size : 96
AVG sent packet size : 66
Last packet sent at : 20:43:00
Total Packets received: 50
MIN rcvd packet size : 48
MAX rcvd packet size : 190
AVG rcvd packet size : 56
Last packet rcvd'd at : 20:43:00
[timesten@tap2 bin]$
[timesten@tap2 bin]$
Edited by: Muhammad.Usman on Oct 13, 2009 9:57 PM

Unable to read data from the SAP marketplace

Hi All,
    These days, certain packages in my download basketball cannot be downloaded, while others can be downloaded normally.
     After serveral redirecting, the SAP download manager keeps informing me that "Unable to read data from the SAP marketplace, check your settings and try again".
     Anyone knows how to solve it?
Thanks,
Yining

Hi Yining,
You user on SAP MarketPlace is locked.
You have to unlock it but I do not know the way.
Check in user data maintenance on SAP MarketPlace who is your responsible and perhaps he wwill be able to solve to unlock our user.
Regards,
Ronan

Error retrieving data from the web server in Excel fo BPC

Hello Everybody,
I'm working with BPC v7.5 , i created some reports with the EVDRE formula and they were working perfectly.
The problem started when i created new users, that in fact have the same access profile and task profile as my user.
i started to test these new users in excel and every time i expand the report this legend appears: " EVDRE Retrying... EVDRE encountered an error retrieving data from the Web Server. Retrying in (X) Seconds...". After waiting a while a push cancel, then appears a window with the legend: Ev4excel Addin, Errors found retriening data.
The funny thing is that when i login back to my user everything works fine again, any idea what could be the problem? the other user have the same permissions.
Thanks a lot in advance!!
Nidia Olguí

very strange. Normally the member access profile must be diifferent. So it is not important the task profile but the member access profile. Can you please double check ?
If you are doing a simple EVDRE with users having problems is it working or you still have problems?
Regards
Sorin Radulescu

EVDRE encountered an error retrieving data from the Web Server

Hi,
I'm working on a presales AppSet "Demo5b".
When I create a brand-new EVDRE report on FINANCE app, there is no problem.
However, after changing to ICMATCHING app, when I type =EVDRE() on a blank sheet and press Refresh, the following message pops up.
EVDRE encountered an error retrieving data from the Web Server
Retrying in (??) seconds
Any idea why this happens and how it can be solved?
Thanks!
Sunny

Hi Joost,
I have the same problem. When I try to retrieve data on an input schedule is launched that error.
I am working on an VM on MS BPC.
I am not working with cubes so the solution is not the same.
If i process all my dimensions this error does not appear any more?
Best regards,
Vitor

Error reading data from CLOB column into VARCHAR2 variable

Hi all,
Am hitting an issue retrieving data > 8K (minus 1) stored in a CLOB column into a VARCHAR2 variable in PL/SQL...
The "problem to be solved" here is storing DDL, in this case a "CREATE VIEW" statement, that is longer than 8K for later retrieval (and execution) using dynamic SQL. Given that the EXECUTE IMMEDIATE statement can take a VARCHAR2 variable (up to 32K(-1)), this should suffice for our needs, however, it seems that somewhere in the process of converting this VARCHAR2 text to a CLOB for storage, and then retrieving the CLOB and attempting to put it back into a VARCHAR2 variable, it is throwing a standard ORA-06502 exception ("PL/SQL: numeric or value error"). Consider the following code:
set serveroutput on
drop table test1;
create table test1(col1 CLOB);
declare
cursor c1 is select col1 from test1;
myvar VARCHAR2(32000);
begin
myvar := '';
for i in 1..8192 loop
myvar := myvar || 'a';
end loop;
INSERT INTO test1 (col1) VALUES (myvar);
for arec in c1 loop
begin
myvar := arec.col1;
dbms_output.put_line('Read data of length ' || length(myvar));
exception when others then
dbms_output.put_line('Error reading data: ' || sqlerrm);
end;
end loop;
end;
If you change the loop upper bound to 8191, all works fine. I'm guessing this might have something to do with the database character set -- we've recently converted our databases over to UTF-8, for Internationalizion support, and that seems to have changed underlying assumptions regarding character processing...?
As far as the dynamic SQL issue goes, we can probably use the DBMS_SQL interface instead, with it's EXECUTE procedure that takes a PL/SQL array of varchar2(32K) - the only issue there is reading the data from the CLOB column, and then breaking that data into an array but that doesn't seem insurmountable. But this same basic issue (when a 9K text block, let's say, turns into a >32K block after being CLOBberred) seems to comes up in other text-processing situations also, so any ideas for how to resolve would be much appreciated.
Thanks for any tips/hints/ideas...
Jim

For those curious about this, here's the word from Oracle support (courtesy of Metalinks):
RESEARCH
========
Test the issue for different DB version and different characterset.
--Testing the following PL/SQL blocks by using direct assignment method(myvar := arec.col1;) on
different database version and different characterset.
SQL>create table test1(col1 CLOB);
--Inserting four CLOB data into test1.
declare
myvar VARCHAR2(32767);
begin
myvar := RPAD('a',4000);
INSERT INTO test1 (col1) VALUES (myvar);
myvar := RPAD('a',8191);
INSERT INTO test1 (col1) VALUES (myvar);
myvar := RPAD('b',8192);
INSERT INTO test1 (col1) VALUES (myvar);
myvar := RPAD('c',32767);
INSERT INTO test1 (col1) VALUES (myvar);
commit;
end;
--Testing the direct assignment method.
declare
cursor c1 is select col1, length(col1) len1 from test1;
myvar VARCHAR2(32767);
begin
for arec in c1 loop
myvar := arec.col1;
--DBMS_LOB.READ(arec.col1, arec.len1, 1, myvar);
dbms_output.put_line('Read data of length: ' || length(myvar));
end loop;
end;
The following are the summary of the test results:
===================================
1. If the database characterset is WE8ISO8859P1, then the above direct assignment
method(myvar := arec.col1;) works for database version 9i/10g/11g without any
errors.
2. If the database characterset is UTF8 or AL32UTF8, then the above direct assignment method(myvar := arec.col1;) will generate the "ORA-06502:
PL/SQL: numeric or value error" when the length of the CLOB data is greater
than 8191(=8K-1). The same error can be reproduced across all database versions
9i/10g/11g.
3. Using DBMS_LOB.READ(arec.col1, arec.len1, 1, myvar) method to read CLOB data into a VARCHAR2 variable works for both WE8ISO8859P1 and UTF8
characterset and for all database versions.
So - it seems as I'd surmised, UTF8 changes the way VARCHAR2 and CLOB data is handled. Not too surprising, I suppose - may you all be lucky enough to be able to stay away from this sort of issue. But - the DBMS_LOB.READ workaround is certainly sufficient for the text processing situations we find ourselves in currently.
Cheers,
Jim C.

Error reading data from Infocube using shell script.

Dear all ,
I am facing a problem while reading data from an infocube using a shell script.
The details are as follows.
One of the shell script reads the data from the infocube to extract files with the values.
The tables used for extraction by the shell script are :
from   SAPR3."/BIC/F&PAR_CUBE.COPA"     FCOPA,
       SAPR3."/BIC/D&PAR_CUBE.COPAU"    COPAU,
       SAPR3."/BIC/D&PAR_CUBE.COPAP"    COPAP,
       SAPR3."/BIC/D&PAR_CUBE.COPA1"    CCPROD,
       SAPR3."/BIC/D&PAR_CUBE.COPA2"    CCCUST,
       SAPR3."/BIC/D&PAR_CUBE.COPA3"    COPA3,
       SAPR3."/BIC/D&PAR_CUBE.COPA4"    COPA4,
       SAPR3."/BIC/D&PAR_CUBE.COPA5"    COPA5,
       SAPR3."/BIC/MCCPROD"      MCCPROD,
       SAPR3."/BIC/SCCPROD"      SCCPROD,
       SAPR3."/BIC/MCCCUSTOM"    MCCCUSTOM,
       SAPR3."/BIC/SCCCUSTOM"    SCCCUSTOM,
       SAPR3."/BIC/SORGUNIT"     SORGUNIT,
       SAPR3."/BIC/SUNIMOYEAR"   SUNIMOYEAR,
/*     SAPR3."/BI0/SFISCPER"     SFISCPER, */
       SAPR3."/BI0/SREQUID"      SREQUID,
       SAPR3."/BI0/SCURRENCY"    SCURRENCY,
       SAPR3."/BIC/SSCENARIO"    SSCENARIO,
       SAPR3."/BIC/SSOURCE"      SSOURCE
The problem is that the file generation by this script (after reading the data from teh infocube) is taking an unexpected time of 2 hours which needs to be maximum 10 mins only.
I used RSRV to get the info about these tables for the infocube:
Entry '00046174', SID = 37 in SID table is missing in master data table /BIC/MCUSLEVEL2
Entry '00081450', SID = 38 in SID table is missing in master data table /BIC/MCUSLEVEL2
and so on for SID = 39 and SID = 35 .
Checking of SID table /BIC/SCUSLEVEL2 produced errors
Checking of SID table /BIC/SCUSLEVEL3 produced errors
Can you please let me know if this can be a reason of delay in file generation (or reading of data from the infocube).
Also , Please let me know how to proceed with this issue.
Kindly let me know for more information, if required.
Thanks in advance for your help.
-Shalabh

Hi ,
In continuation with searching the solution to the problem , I could manage to note a difference in the partition of the Fact table of the infocube.
Using SE14 -> Storage Parameters, I could find the partition done for the fact table as :
PARTITION BY: RANGE
COLUMN_LIST: KEY_ABACOPA
and subsequently there are partitions with data in it.
I need to understand the details of these partitions .
Do they correspond to each requests in the infocube(which may not be possible as there are 13 requests in infocube and much more partitions).
Most importantly, since this partition is observed for this onfocube only and not for other infocubes, it is possible that it can be a reason for SLOW RETRIEVAL of data from this ionfocube( not sure since the partition is used to help in fast retreival of data from the infocubes).
Kindly help.
Thanks for your co-operation in advance.
-Shalabh

Error reading data from an infocube

Hello,
I want to read data from a remote infocube in tcode listcube, and I get this 2 error messages: "Error reading the data of InfoProvider IC_SNP_DR" and "Error when generating program". This is a remote cube reading data from a SNP Planning Area.
I´ve already activated Plng Object Strucuture 9ASNPBAS and repair all infoobject but in tcode /SAPAPO/MSDP_ADMIN in 9ASNPBAS I get message "Not All InfoObjects Can Be Read". Is this why I get the error in reading the infocube?
Does anyone know why I get this errors and how to solve them?
Thanks and Regards,
Teresa Lopes

Teresa
From /SAPAPO/MSDP_ADMIN go to extras/data extraction tools. This gives you all the things you need to manage the extractors on the snp planning areas. you can use RSA3 to test the extractor and pull data to a list. Are you sure you want to extract using the total POS (9SNPBAS). Based on the data you need you might want to extract based on one of the standard SNP aggregates. MALO (material location) for example.
You mention that the POS was active. Make sure you Planning area is also initialized
George

Error reading data from the MS Dos Console.

Similar Messages

Maybe you are looking for