Planned Order Report for WBS

Hi expert,
Is there any standard report to list planned order for one WBS ?
Thanks and Regards
Shubin

Hi Balachandar，
Thanks a lot for your support, I would like to have report which could be export to Excel. By MD16, we see there are more than 50 pages, we could not export to Excel easily.
Thanks and Regards
Shubin

Similar Messages

  • Planned order link for Strategy group 40

    Dear All,
    We are creating sales order for a material which is having strategy group 40. Requirement Type KSV is determined in the sales order. Let us assume that we don't have stock for this material. After MRP run, planned order has been created for sales order qty. Now I want to get planned order number for sales order at table level or any using any FM to use Z report. I can check the planned order number in MD4C by giving sales order number in the input screen but I want to know where and how to get the link for Z report. Please any one help me out on this.
    Thanks in advance,
    Regards,
    Babu

    any idea/update on this.....

  • Error in the explosion of "order report for element" in MD04

    Hi gurus,
    On the report MD04, I try to explode the "order report for element", where you can find the tree of the bom with the mrp results to cover the materials needs, but the following error occurs:
    "Order 000001008418 possibly contains recursive BOM components
    Message no. MF331
    Diagnosis
    The order contains component reservations that could have a higher low-level code than that of the order material.
    To avoid an endless loop the requirement for this component is not included."
    As one of you suggested, I tryed to install the  Snote: 10000698, but the systeme tell me that there are no valid input to manage.
    The error related is the follow:
    "SAP Note does not contain valid correction instructions
    Message no. SCWN002
    Diagnosis
    You tried to implement corrections that are contained in an SAP Note.
    The corrections in this SAP Note are, however, not valid for the release and Support Package level of your system. This means that the error that is described in the SAP Note either did not occur in your system, or it has already been corrected by a Support Package.
    In certain cases the error cannot be corrected by an SAP Note correction.
    System Response
    The system cannot implement the SAP Note.
    Procedure
    Follow the recommendations in the SAP Note text."
    ..now, what can I do?I can find No significative instruction on the note!!
    Please help me: our client is very annoyed by this problem!
    Thanks,
    Valentina

    Dear,
    Error message MF331 'Order & possibly contains recursive BOM components' is generated in the order report.
    If the header BOM material same you are using as a component then BOM become Recursive.
    If you create a recursive BOM, you must decide whether you want to allow recursiveness or delete the component that caused the recursiveness,
    Go to CS02  BOM of that material and check the sets  recursive indicator.
    Also refer the OSS Note 839879. 161742 - Consulting note:
    Regards,
    R.Brahmankar

  • Collective Planned orders Scheduling for lower level orders with reference to the Superior order

    Hi All,
    Collective planned order scheduling.
    I have been trying to reschedule the superior planned order and i was expecting the lower level planned orders to reschedule based on the superior planned order.
    My problem is
    when i try to reschedule the superior planned order the system is not rescheduling the lower level planned orders.
    For example if i change the basic finish date of superior planned order as 30/09/2014 and reschedule the planned order it is only scheduling the header planned order and the lower level planned order is not scheduling.
    Could some one tell me why this is not happenning at planned order level.
    As the rescheduling of collective order will work at production order level but for some reason it is not happening at planned order level(as there is no option available to do so).
    Please give your thoughts on this asap.
    Mahee.

    Hello Mahee
    Please observe that your system is working as designed. Planned orders are scheduled independently, even when they are part of a network/collective order. Note 152319 explains the planned order scheduling in detail and it provides the following information:
    * No scheduling of overall networks is executed although a directly manufactured component is assigned.
    Note that no scheduling of the overall network is executed for planned orders. For the components requirements dates are determined. In order to cover them, planned orders are created in the next MRP run. Since the requirements are not managed using the exact time, the results of the planned order scheduling and of a scheduling of the overall network of the converted collective order can differ.
    BR
    Caetano

  • There is still a purchase order commitment for WBS

    Hi All,
    We need to close  whole project while closing I am getting the attached error.
    There is still a purchase order commitment for WBS
    Additional Information or Comments: = I have checked and closed all purchases order commitment. But still the project shows the below error     .
    Edited by: nandhasapfi on Sep 22, 2011 10:52 AM

    Hello,
    This message is being output correctly as the AuC still has
    values against it.
    These values must be cleared before you can close the WBS element.
    Please do a FUL settlement against the WBS element to clear
    these values and then try to set the CLSD status again.
      There are two ways to 'clean' the AuC, so that you can deactivate it
      and close the wbs element:
      1. Post a manual retirement of the AuC to clean it.
      2. Create a new AuC and use it for all the differences in the final
         settlement.
    I hope this helps,
    regards
    Ray

  • Internal Order Report - For the documnets when the cost ele. was not create

    Hi,
    We created internal orders for tracking capital expenditure relating to assets. At that time, we were not created asset GL's as cost element. Recently we created asset GL's as cost elements (category 90).
    Now we are getting the internal order report after creation of cost element for the transactions done thereafter. We mentioned the internal order number in PO but not in accounting document earlier. Now we are maintaining internal order number in accounting document also.
    So when we run OKBA we are getting CO document but, it is not tracking against internal order (since order number was not mentioned earlier). We executed one MM document in which internal order was mentioned through OKBB but there is no change in the internal order report.
    Is there any possibility to get the internal order report for the transactions done before creation of cost element.
    Please guide me
    Best Regards
    Madhusekhar Gupta G

    Hi,
    Thanks for your quick replies.
    Can we get the report as follows.
    1. Total Po's value for the internal Order (through Table EKKN)                                                      xxx
    Less: Value already posted to Internal order after creation of cost elements (S_alr_87013019)  xxx
    Less: Total Value to be invoiced (Tcode -ME2N)                                                                             xxx
    Net amount to be posted to Internal Order manually                                                                        xxx
    Is it correct?
    Regards
    Madhusekhar Gupta G
    Edited by: gms gupta on Feb 20, 2012 4:33 PM

  • Planned Order Profile for REM

    Hi,
    Is Planned order profile for REM needs to configured for Planned Order type PE in IMG(T Code OMDD).
    Thanks in Advance.
    Regards,
    PPcon

    Dear,
    SPRO>Production>MRP> proc.proposals>planned orders-->Define order profiles
    Ypu have set the rep mfg indiactor & suitable rem profile in MRP 4 view of material
    BOM Explosion Tab
    Selection method : 2 -By production version (prior to this , a Prod version shd be created)
    Please try and come back.
    Regards,
    R.Brahmankar

  • Order report for all components & services with plan/actual price

    Dear all Hi,
    I want to see a report which should give me the all the details of components & services cunsumed with their paln& actual costs for a production order, please suggest/help.
    Thanks in advance.

    Hi,
    You can get order wise costing report as following :
    Go to Production-->Shop Floor Control>Information System>Controlling Reports->Product Cost by Order where you will different drilldown options for getting costing report for orders.
    Hope this helps.
    Regards,
    Tejas

  • TREE Report for WBS Element

    hi gurus,
             can any one tell me how to generate the hierarchical (tree ) report for a purticular project.
    I should genarate a hierarchical report for all WBS (From top level to lower level WBS ).
    With Regards,
    Raj.

    Hi raj,
    check BCALV_TREE_02 for ALV TREE DISPLAY ( for more clarification debug it )
    * my final table structure
            BEGIN OF gty_fin ,
             posid TYPE ps_posid,
             pspnr TYPE ps_intnr,
             post1 TYPE ps_post1,
             ebeln TYPE ebeln,
             ebelp TYPE ebelp ,
             name1 TYPE name1,
             belnr TYPE mblnr ,
             cplan TYPE wtgxxx ,
             netpr TYPE ekpo-netpr ,
             dmbtr TYPE dmbtr ,
             obligo TYPE dmbtr,
             vefugt TYPE dmbtr,
             verfugbar TYPE dmbtr,
            END OF gty_fin ,
    * Coding starts here in ur PBO
    *do modification accordingly
    MODULE status_0100 OUTPUT.
        PERFORM init_tree.
    ENDMODULE.                 " STATUS_0100  OUTPUT
    FORM init_tree .
    * create container for alv-tree
      DATA: l_tree_container_name(30) TYPE c.
      l_tree_container_name = 'CCONTAINER1'.
      CREATE OBJECT g_custom_container
        EXPORTING
          container_name              = l_tree_container_name
    * create tree control
      CREATE OBJECT g_alv_tree
        EXPORTING
          parent                      = g_custom_container
          node_selection_mode         = cl_gui_column_tree=>node_sel_mode_single
          item_selection              = ' '
          no_html_header              = 'X'.
      DATA l_hierarchy_header TYPE treev_hhdr.
      PERFORM build_hierarchy_header CHANGING l_hierarchy_header.
    * Hide columns and sum up values initially using the fieldcatalog
      PERFORM build_fieldcatalog.
      CALL METHOD g_alv_tree->set_table_for_first_display
        EXPORTING
          is_hierarchy_header = l_hierarchy_header
        CHANGING
          it_fieldcatalog     = git_fieldcatalog
          it_outtab           = git_edit. "table must be empty !
      PERFORM create_hierarchy.
      PERFORM register_events.
      CALL METHOD g_alv_tree->update_calculations.
    * Send data to frontend.
      CALL METHOD g_alv_tree->frontend_update.
    ENDFORM.                    "init_tree
    " INIT_TREE
    *&      Form  BUILD_HIERARCHY_HEADER
    FORM build_hierarchy_header  CHANGING
                                     p_hierarchy_header TYPE treev_hhdr.
      p_hierarchy_header-heading = 'Project Definition'(002).
      p_hierarchy_header-tooltip = 'Project Definition'(002).
      p_hierarchy_header-width = 35.
      p_hierarchy_header-width_pix = ''.
    ENDFORM.                    " BUILD_HIERARCHY_HEADER
    *&      Form  exit_program
    *       free object and leave program
    FORM exit_program.
      CALL METHOD g_custom_container->free.
      LEAVE PROGRAM.
    ENDFORM.                    "exit_program
    *&      Form  build_fieldcatalog
    FORM build_fieldcatalog.
      DATA: lwa_fieldcatalog TYPE lvc_s_fcat.
    * The following function module generates a fieldcatalog according
    * to a given structure.
      REFRESH git_fieldcatalog.
      CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
        EXPORTING
          i_structure_name = 'ZDRK'       "  i created a structure same as final itab.
        CHANGING
          ct_fieldcat      = git_fieldcatalog.
      LOOP AT git_fieldcatalog INTO lwa_fieldcatalog.
        CASE lwa_fieldcatalog-fieldname.
    * hide columns which are already displayed in our tree
          WHEN 'POSID' OR 'PSPNR' OR 'EBELN' OR 'EBELP' OR 'POST1'.
            lwa_fieldcatalog-no_out = 'X'.
    ** Do some initial calculations:
    ** ALV Tree uses the field 'do_sum' to declare that a function
    ** for the corresponding column shall be calculated.
    ** Use 'h_ftype' to set the function type (MAX, MIN, SUM, AVG).
          WHEN 'DMBTR' OR 'OBLIGO'  OR 'VEFUGT' OR 'VERFUGBAR'. " 'CPLAN' OR
            lwa_fieldcatalog-do_sum = 'X'.
            lwa_fieldcatalog-h_ftype = 'SUM'.
          WHEN 'BELNR'.
            lwa_fieldcatalog-hotspot = 'X'.
            lwa_fieldcatalog-tooltip = 'Invoice Document Number'(003).
        ENDCASE.
        MODIFY git_fieldcatalog FROM lwa_fieldcatalog.
      ENDLOOP.
    ENDFORM.                               " build_fieldcatalog
    *&      Form  create_hierarchy
    FORM create_hierarchy.
      DATA: ls_fin TYPE gty_fin,
          lt_fin TYPE TABLE OF gty_fin,
          lv_posid1_last TYPE ps_posid,
          lv_ebeln TYPE ebeln,
          lv_post1 TYPE ps_post1,
          lv_ebeln_last TYPE ebeln,
          lv_ebelp TYPE ebelp.
      DATA: lv_ebeln_key TYPE lvc_nkey,
            lv_ebelp_key TYPE lvc_nkey,
            lv_last_key TYPE lvc_nkey,
            lv_top_key TYPE lvc_nkey,
            lv_node_text TYPE lvc_value,
            lv_text_psp TYPE char10 .
      lv_text_psp = 'Project'(004).
    * all my data is in final itab git_fin
      lt_fin[] = git_fin .
      lv_node_text = gv_proj.
      CALL METHOD g_alv_tree->add_node
        EXPORTING
          i_relat_node_key = ''
          i_relationship   = cl_gui_column_tree=>relat_last_child
          i_node_text      = lv_node_text
        IMPORTING
          e_new_node_key   = lv_top_key.
      LOOP AT lt_fin INTO ls_fin.
        lv_posid1 = ls_fin-posid.
        lv_post1  = ls_fin-post1.
        lv_ebeln  = ls_fin-ebeln.
        lv_ebelp  = ls_fin-ebelp.
        IF lv_posid1 <> lv_posid1_last.     " on change of posid
          lv_posid1_last = lv_posid1.
    * PO- ebeln nodes
          PERFORM add_ebeln USING  lv_posid1
                                   lv_post1
                                   lv_top_key
                            CHANGING lv_ebeln_key.
        ENDIF.
        IF lv_ebeln <> lv_ebeln_last.  " On change of lv_ebeln
          lv_ebeln_last = lv_ebeln .
          PERFORM add_ebelp USING ls_fin
                                  lv_ebeln_key
                                  lv_ebeln
                        CHANGING  lv_ebelp_key .
        ENDIF.
    * Leaf:
        PERFORM add_complete_line USING  ls_fin
                                         lv_ebelp_key
                                         lv_ebelp
                              CHANGING   lv_last_key .
      ENDLOOP.
    * expand first node initially
      CALL METHOD g_alv_tree->expand_node
        EXPORTING
          i_node_key = lv_top_key.
    ENDFORM.                               " create_hierarchy
    *&      Form  ADD_EBELN
    FORM add_ebeln  USING    p_lv_posid1 TYPE ps_posid
                             p_lv_post1 TYPE  ps_post1
                             p_lv_top_key TYPE lvc_nkey
                    CHANGING p_lv_ebeln_key TYPE lvc_nkey.
      DATA : ls_fin TYPE gty_fin,
             lv_node_text TYPE lvc_value ,
             lv_text_psp TYPE char11.
      lv_text_psp =  'WBS Element'(005).
      lv_node_text =  p_lv_posid1.
      CONCATENATE p_lv_post1 lv_node_text
             INTO lv_node_text
        SEPARATED BY space.
    * add node
      CALL METHOD g_alv_tree->add_node
        EXPORTING
          i_relat_node_key = p_lv_top_key
          i_relationship   = cl_gui_column_tree=>relat_last_child
          i_node_text      = lv_node_text  " 'WBS Element'
          is_outtab_line   = ls_fin
        IMPORTING
          e_new_node_key   = p_lv_ebeln_key.
    ENDFORM.                    " ADD_EBELN
    *&      Form  ADD_EBELP
    FORM add_ebelp  USING    p_ls_fin TYPE gty_fin
                             p_lv_ebeln_key TYPE lvc_nkey
                             p_lv_ebeln TYPE ebeln
                    CHANGING p_lv_ebelp_key TYPE lvc_nkey.
      DATA : ls_fin TYPE gty_fin ,
            lv_node_text TYPE lvc_value,
            lv_text_order TYPE char10 .
      lv_text_order = 'ORDER  '(006).
      lv_node_text = p_lv_ebeln  .
      CONCATENATE lv_text_order lv_node_text
             INTO lv_node_text
        SEPARATED BY space.
      CALL METHOD g_alv_tree->add_node
        EXPORTING
          i_relat_node_key = p_lv_ebeln_key
          i_relationship   = cl_gui_column_tree=>relat_last_child
          i_node_text      = lv_node_text " 'EBELN
          is_outtab_line   = ls_fin
        IMPORTING
          e_new_node_key   = p_lv_ebelp_key.
    ENDFORM.                    " ADD_EBELP
    *&      Form  ADD_COMPLETE_LINE
    *       text
    *      -->P_LS_FIN  text
    *      -->P_LV_EBELP_KEY  text
    *      <--P_LV_LAST_KEY  text
    FORM add_complete_line  USING    p_ls_fin TYPE gty_fin
                                     p_lv_ebelp_key TYPE lvc_nkey
                                     p_lv_ebelp TYPE ebelp
                            CHANGING p_lv_last_key TYPE lvc_nkey.
      DATA :  lv_text_pos TYPE char10,
              lv_node_text TYPE lvc_value,
              lv_node_layn TYPE lvc_s_layn.
      lv_text_pos = 'Position '(007).
      lv_node_text = p_lv_ebelp  .
      IF p_lv_ebelp IS INITIAL .
        lv_node_text = 'PLAN'(008) .
        lv_node_layn-hidden = 'X'.
      ELSE.
        CONCATENATE lv_text_pos lv_node_text
               INTO lv_node_text
          SEPARATED BY space.
      ENDIF.
      CALL METHOD g_alv_tree->add_node
        EXPORTING
          i_relat_node_key = p_lv_ebelp_key
          i_relationship   = cl_gui_column_tree=>relat_last_child
          is_outtab_line   = p_ls_fin
          is_node_layout   = lv_node_layn
          i_node_text      = lv_node_text " Position of item
        IMPORTING
          e_new_node_key   = p_lv_last_key.
        CLEAR : lv_node_layn .
    ENDFORM.                    " ADD_COMPLETE_LINE
    Regards,
    Aby
    hope this might be useful.

  • Planned Order report

    Good morning,
    I am trying to find a report for the following scenario.
    We have a parent Planned Order and use fixed pegging, we have dependent Planned Orders from the Parent.
    Is there a report that I could see these?
    Would be even better if I could report status (as with the MRP lists).
    Thanks in advance.

    Hi,
    Check the belwo Options..-
    Option1
    MDVP - Collective Availability Check
    Option2
    MD4C-order report
    Option3
    COOIS-Order Informatio system
    Reg,
    Dsk

  • Planned Order creation for Sales Order and Purchase Order

    Hi
    We have a following requirement.
    In normal scenario when we have demand for material  which was created by MD61 and in addition to that if there is Sales Order the 1st planned order gets revised.To better expalin this consider possible scenario
    You create plan via MD61 for 200 qty .The system creates Planned Order for 200.
    Now there is Sales Order for 150 peices.Then what happens is original  Planed Order of 200 is changed to 50 and another planned order is created for 150 peices.The requirement is not summed.
    Now in new scenario instead of Sales Order there is Intercompany Purchase Order of 150 peices.
    Now the system is not changing original Planned Order of 200,but it created another planned order of 150.So now there are 2 Planned Orders of 150 and 200.
    What I want to know is there any way wherein the system will reduce the original planned order (similar to Sales Order scenario)
    Regards

    Hi,
    Use Strategy 52 in urs case.
    PIR witll be created .
    None convertable planned order will be created.
    Once you get sales order for that material.
    New planned order will be created which will consume PIR( planned order ).
    Eg.
    PIR 10.
    Planned order 10 qty.
    Sales oder 6
    Planned order for SO 6 qty
    Planned order through pir will become 4 qty.
    Regards,
    Vishal

  • Want to know the sale order report for Delivery bclok at header level

    Dear,
    i would like to know some reports
    1). I would like to know  is ther any  SAP std report  is available for Sale order if Blocked for delivery(VBAK-LIFSK)??
    2). is ther any report for knowing the Sale order  if header/item text  is maintained??
    Pl advice if any std report is available.
    Thanks in advance

    Dear Pradyumna,
    Thanks for your reply, I did't find any Header r item text in the report.
    Pl suggest is there any other report is availble???
    Thanks in adv.

  • MD4C order report for shipping notification doesnu2019t display any component

    Dear guru ,
    I have created a shipping notification for a subcontract order.
    If I run order report (using MD04 or MD4C)  for shipping notification doesnu2019t display any component.
    I have seen note 498217.
    Any workaround does exist ? What do you suggest ?
    I need to have a confirmation date from vendor but also to have a pegging of the requirements.
    Thanks in advance.

    Any suggestions to this? I have the same problem
    rgds
    GAR

  • MRP Planned order generation for Order reservation excluding Dependent Requirements

    In our Project we have a requirement like for FG stage & SFG1 stage are M.T.O So after sales order are punched through  MD50 we have created Planned orders against sales orders,But dependent stages like SFG2 & SFG3 which are pure M.T.S so only Dependent requirements will get generated.Suppose for SFG1 i have partially converted planned order to Production order then for component SFG2 we get Partial Quantity as order reservation.Now requirement is if i run MRP for SFG2 system need to generate demand only for order reservation excluding Dependent requirements.Is there any possibility where we can generate demand only for order reservation.As system will create Planned order for SFG2=Dependent requirement + Order reservation

    Hi Uli,
    Suppose i have Sales order--100 kgs for FG
    B.O.M levels
    1.FG-----M.T.O
    2.SFG1---M.T.O
    3.SFG2---M.T.S
    4.SFG3---M.T.S
    5.ROH
    So if i run MRP via MD50 system would generate planned orders for FG & SFG1 level as they are M.T.O specific
    Now my requirement list would be
    FG-100kg planned order
    SFG1-100kg planned order
    SFG2-100kg dependent requirement.
    Now suppose i have partially converted SFG1 planned order to production order
    SFG1--100kg planned order to 30 kg production order
    Now my requirement list would be
    FG-100kg planned order
    SFG1-70kg planned order & 30 kg production order
    SFG2-70kg dependent requirement & 30kg order reservation.
    Here my requirement is if i run MRP for SFG2 in MD02 as these stage is M.T.S system should provide 30 kg planned order & if we see down the line it would be like
    Now my requirement list would be
    FG-100kg planned order
    SFG1-70kg planned order & 30 kg production order
    SFG2-30kg planned order & 70kg dependent requirement.
    SFG3-30kg planned order
    ROH-30kg Purchase req
    Client requirement is like these..

  • Planned order MD11/Planned order MD02 for sale order

    hi
    How to identify a planned order ref to sale order created manually MD11 or created by MRP run MD02.
    is there any table entries plaaned order and transaction codes?
    i got two planned orders qty1 and qty5  from a client for same sale order item.
    what could be possibilites.
    -ashok

    Dear,
    Couple of check,
    1) Check  Lotsize ?
    2)Planning strategy?
    3)Individual /collective requirements indicator in MRP4 view?
    For MTO, you will get one Planned Orders per one requirement element.
    So, you are getting number of Planned Orders for FG?
    For MTS Scenarion, the Lot Size EX will work just like the Daily lotsize (TB).
    So, system will club all the requiremnts per day and propose the Planned Orders for 1 day requirements.
    You will get separate planned orders for the Next day.
    Hope clear to you.
    Regards,
    R.Brahmankar

Maybe you are looking for