Error reads as "no stock in returns, line has been processed check mb51"

Hello Experts,
I am getting an error "no stock in returns, line has been processed check mb51" while processing the returns delivery and no material document exists in MB51 after PGI. Can anyone suggest whats missing or wrong ?
regards, sunny

Hi,
Go to VL02N and check the Goods Movement Status for the Delivery under "Status" Tab. It should be C i.e. Completed. If it is not then PGI has not been done for the delivery so first do PGI and then try for Returns.

Similar Messages

Error saving map. Stored procedure returned non-zero result. Check if source and target schemas are present.

I am using VS 2012 and BizTalk 2013 and attempting to deploy an application to BizTalk when I get these errors:
Error 47
at Microsoft.BizTalk.Deployment.Assembly.BtsMap.Save()
at Microsoft.BizTalk.Deployment.Assembly.BtsArtifactCollection.Save()
at Microsoft.BizTalk.Deployment.Assembly.BtsAssembly.Save(String applicationName)
at Microsoft.BizTalk.Deployment.BizTalkAssembly.PrivateDeploy(String server, String database, String assemblyPathname, String applicationName)
at Microsoft.BizTalk.Deployment.BizTalkAssembly.Deploy(Boolean redeploy, String server, String database, String assemblyPathname, String group, String applicationName, ApplicationLog log)
0 0
Error 49
Failed to add resource(s). Change requests failed for some resources. BizTalkAssemblyResourceManager failed to complete end type change request. Failed to deploy map "XXX.BTS2013.XXX.Maps.map_XXXX_R01_InsLabProc".
Error saving map. Stored procedure returned non-zero result. Check if source and target schemas are present. Error saving map. Stored procedure returned non-zero result. Check if source and target schemas are present.
0 0
Error 46
Failed to deploy map "XXX.BTS2013.XXX.Maps.map_XXXX_R01_InsLabProc".
Error saving map. Stored procedure returned non-zero result. Check if source and target schemas are present.
0 0
I also tried to Import a MSI file from our test environment to see if that would work...got the same errors. After spending hours (not kidding) looking for an answer, all I could find is that a hotfix would work. So, I got the hotfix from Microsoft
Support and applied it then rebooted. Still getting the same errors. I'm absolutely at a stand still. Interesting that I got this application to deploy yesterday and then the next time I deployed it I started getting these errors. I'm
ready to pull my hair out!
Is there an answer for this out there somewhere? Any help would be appreciated.
Thanks,
Dave

Hi Dave,
Which hotfix have you applied? I don't think a hotfix of this issue is available for BizTalk 2013 yet. You should create a
support ticket with Microsoft to get a solution.
If this answers your question please mark as answer. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

How to find out if your BB line has been capped?

Is there somewhere I can go to find out if my BB line has been capped? I had an email form BT about a month ago warning me I might exceed my download limit. In the end I did not exceed my limit for the month. But it was shortly after that my BB speed was cut in half and has remained that way ever since. I have had 2 engineers out who can find nothing wrong with the exchange, the line or the equipment in my house. Despite at least 3 SNR resets, my IP profile has been fixed at 750k for the whole time. My IP profile was 2000k or more before the speed was cut.
I just wonder if there is anyway to tell if your BB line has been throttled.

"it is very likely a local noise issue that your line is picking up it is not a line fault this is is why bt cannot find the fault the problem could be caused by many things microwaves central heating pumps computer monitors poweresupplies and many similar items"
If there is a local noise issue as you suggest, How would one detect such a thing? You can't just switch everything off in a house and leave it for 3 to 5 days to see if the BB speed increases. Surely the tests the the engineers did when they came out to see me would have detected any noise on the line when they tested the line.
The thing I find most frustrating is BT don't even seem able to admit I have any sort of problem at all. The fact I have had a stable connection for years and then suddenly it drops by half overnight seems not to be considered a problem. I think I might just change to another ISP. I really don't think it can be any worse than this.

HT1338 What's going on with iCloud (MobileMe)? I'm able to sign in here, but I can't access mail on my Macbook Pro, iPhone, or work computer. I always get an authorization error (user-id or passwork wrong). This has been going on for almost a week now.

What's going on with iCloud (MobileMe)? I'm able to sign in here, but I can't access mail on my Macbook Pro, iPhone, or work computer. I always get an authorization error (user-id or passwork wrong). This has been going on for almost a week now.

The single download means that you won't be able to redownload it from the store without paying, either on a computer's iTunes or an iOS device - it doesn't stop you from copying the audiobook to your other computers or syncing it to your iOS devices, you just can't redownload it. (I believe that they are all supplied to Apple by audible.com, so I assume that it's them requiring the one-time download.)
You can download audiobooks on your computer's iTunes and sync them to iOS devices, you do not have to buy them directly on the device (if you do then you can copy them back to your computer's iTunes library by connecting the device and using the File > Devices > Transfer Purchases menu option on your computer's iTunes).
What you are doing to sync them should work i.e.
- connecting the iPad to your Mac
- selecting the iPad on your Mac's iTunes
- selecting its Books tab and selecting the audiobooks that you want to sync to the iPad and syncing/applying that selection.
You should then get an audiobooks option in the Music app on your iPad. If they aren't appearing there then do they show in Settings > General > Usage > Music on the device - if you have audiobooks on the iPad then they should be listed there under an 'audiobooks' heading.
By 'restart the iPad' do you mean a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
You could also try closing its Music app via the iPad's taskbar : Force an app to close in iOS.
And do a soft-reset and retry syncing.
I assume that music and other items sync ok ?

27" iMac was stolen, now returned but has been locked what do I do?

My 27' iMac was stolen, now returned but has been locked what do I do? It was purchased in December of 2011, they nust have set up icloud account to lock it. How do I get around this? Apple should have my serial number of this computer matching my account somewhere right?

What do you mean by 'locked'. Is it the admin password that you don't know or did they set a firmware password?

How to show all items in the reading list? I think this option has been removed in Safari Version 7.0.2

How to show all items in the reading list? I think this option has been removed in Safari Version 7.0.2

Thanks. That solved it. I had my doubts since I wasn't concerned about my lost bookmarks. I was concerned about the broken functionality. In any event, restoring from a backup solved both the functionality and the lost bookmarks. I appreciate the response!

Error occurred in deployment step 'Activate Features':EXCEPTION HAS BEEN THROWN BY THE TARGET OF AN INVOCATION?

Hi All,
While building event handler to call webservice facing "Error occurred in deployment step 'Activate Features':EXCEPTION HAS BEEN THROWN BY THE TARGET OF AN INVOCATION"; If comment webservice, then build successfully. How to fix this issue?
Thanks in advance!

hi
if you call WCF service in feature event receiver you need to ensure that proxy is properly configured. In most cases proxy is configured via web.config file using <system.serviceModel> section, but if it is used in feature receiver it depends on how
you activate the feature:
1. if feature is added to onet.xml of custom web template which is used for creating site collection from Central Administration you will need to modify web.config file of CA
2. similar to previous but instead of site collection you try to create sub site using custom web template: in this case you will need to modify web.config of your Sharepoint web application
3. if you activate feature from timer job somehow, you will need to modify owstimer.exe.config
4. if you activate feature form powershell, most probably you will need to modify or create powershell.exe.config, but I didn't try it
The most simple way which will work in all cases is to configure WCF proxy programmatically. See the following forum thread for details:
How can I set an HTTP Proxy (WebProxy) on a WCF client-side Service proxy.
Blog - http://sadomovalex.blogspot.com
Dynamic CAML queries via C# - http://camlex.codeplex.com

LSMW - Sending E-Mail about errors after a batch input has been processed..

Hi All,
I have a requirement in LSMW. The LSMW has to send an e-mail to a distribution list after all records are read and posted through LSMW i.e, if the method used is Batch Input Session then an e-mail has to be sent to a distribution list after the Batch Input Session has been processed. Kindly help me regarding this..
Regards,
Mahesh

Hi,
You can trigger an event once all the records are being processed and use that event to start the workflow. From workflow you can send mails to the initiator of the Batch session.
Regards,
Sumalatha

Dreamweaver Template Error: Error reading file (Site Location/info) returned incomplete data

Hello!
I am working on new website we are creating for our company. I have never really had any Dreamweaver template file errors before...so this one has me really stumped! We purchased the site files from Template Monster and I have contacted their tech support, but I have not had much luck with them.
I started out by creating the Dreamweaver template folder that includes the template files that I would like to use. I started creating some pages using the template. I placed all the html pages in the main folder of the website. When I go to update the template to those pages I get the following error: "Error reading file (Site Location\Folder name\Dreamweaver template name) returned incomplete data".
I am not sure what I am doing wrong. Any help and advice would be greatly appreciated!
The site is a CSS based site with a Flash navigation menu. Since it is in the production phase, I do not yet have it placed on a server so you can take a look at it at this time (although if really needed and we cannot find an answer, I may be able to get the test site on line - if someone thinks they can help me answer this problem by viewing the site). Right now the site is housed in the same place we house all of the other sites we have produced and all of our other templates on our other websites work just fine. The main difference with this site is that we did purchase files from Template Monster to help speed us along during the construction of the page structures and also this site has a Flash Navigation Menu and a few other Flash elements (something our other sites do not really have).
I am using Abobe Dreamweaver CS5 and Windows 7
Thanks again for taking the time to help find and answer to this problem!
-J

I am curious as to why no one likes them around here.
They have spammed these forums in the past.
The code on their pages is rarely 'best-practice' code.
There are much better choices available.
My co-worker and I have to share the files, since we are editing the site together. The files are not local on our computers, but on the company's f drive that have Novell on it.
This arrangement is a recipe for disaster. The correct way to collaborate on a site with a colleague is with the following setup:
Each of you must have a LOCAL site (local to your workstation)
You would use a single remote location as a staging area, so each of you would have a site definition that specifies your own workstation for the local site, and the same network shared location as the Remote site
You will both need to enable Check In/ Check Out
You will both have to agree to PLAY BY THE RULES!
One (or both) of you will also need to have a second site defined that has the staging server as the local root folder, and would have the PRODUCTION server as the remote site. I'll explain how to use this site soon.
When you use CI/CO, your 'gold-standard files' are on the staging server. To begin working, you would connect to the staging server, and double click on a file, which will a) fetch the file from the staging server to your local site, and b) CHECK OUT the file to you. As long as you have the file checked out, it cannot be edited by your colleague. When you are done with your edit, you would CHECK IN the file (which uploads it to the staging server). It can now be edited by your colleague.
When you add templates to this scenario, things get even more complicated, although manageable. If you ever need to make a change to a template you must use the following procedure:
ALL FILES MUST BE CHECKED IN - this includes both you and your colleague.
One of you would connect with the SECOND SITE, open and edit the template, and save it propagating the changes to all "LOCAL" files (i.e., on the staging server).
Each of you would then need to return to the FIRST SITE, and again check out any files you want to work on.
When changes are done, and files are ready to publish, connect to the SECOND SITE, and upload the files from STAGING to PRODUCTION.
Does that make sense? It's important that it does.
I need to add in one more tab/link to the Flash nav bar.
Using Flash for navigation is a VERY POOR CHOICE, unless you also have redundant, text-based navigation on the pages. By using Flash to navigate, you guarantee: a) your pages will not be spiderable by search engines, b) your pages will not be navigable by iPlatforms, and c) your pages will be inaccessible to anyone browsing with screen assistive devices. Someone is making bad decisions about this site, in my opinion.

ERROR - Select a location to which a plant has been assigned

1 Message
Select a location to which a plant has been assigned (Item BOLT&NUT 4.6 COMM HEX HEAD BLK 10X170MM )
this is the error message I get any idea how to fix it?
Cheers
B

Hi. I presume the plants are linked correctly to the new company code in the backend, table T001K?
Also, check the entries in SRM in table BBP_LOCMAP.
Are the plants assigned to the right company codes in this table?
There is an issue if you replicate plants to SRM then change the company code assignment SRM does not get updated.
To correct BBP_LOCMAP you can use function BBP_CHANGE_ORGANIZATION.
Regards,
Dave.

Error in virtual machine event log "disk 1 has been surprise removed"

I have setup hyper-v server 2012 on my server. there is only 1 VM running with 4 GB ram & 1.5 TB expanding hard drive.
I have found error in guest os "disk 1 has been surprise removed"
can any one tell me what is this error exactly. after this error i have checked hyper-v manager & found machine is showing
"Merge In Progress"
i never saw "disk 1 has been surprise removed"
error. is this error occur because of hyper-v server is not configured properly.
Also i have server 2008 R2 DC x64 which is working as hyper-v host. I have checked event logs of same and found following error.
"The disk signature of disk 2 is equal to the disk signature of disk 1."
what is this.
Akshay Pate

I use CA-ArcServer Backup. Their technical support just verified this "warning" can be ignored.
This applies to 2008 - 2012R2. The warning is from VSS. You can disable VSS to stop the warnings, but be forewarned you will cause system instability by disabling VSS.
This is caused by the backup process (specifically imaging) that runs with CA-ArcServe and Windows Backup (and probably others). For CA-ArcServer, you can disregard the other event that coincides with the event id: 157.
I also verified my backups are working, did a file/folder restore test, and restored some emails (I run Exchange 2013 SP1 on this 2012R2 server too), which all worked fine and these restores also caused the 157 warnings.
Hope this eases someone's mind. I get all edgy when I see errors I do not recognize or have never seen before.

Horrible customer service my line has been off my house since dec 22nd due to ice storm

On dec 23 I contacted 8008374966 spoke to person trying to be helpful at that time I didn't realize the line was off my house so on dec 24 I called back and spoke to a different person who guaranteed me that someone would be to my home on the 26 between 9 and 11 am. NO ONE showed up so I call again and was assured they would be there that night the 26 before 7 pm. And No One came so now the 27th I again call the same number and end up with a woman this time who talked in circles and tried to tell me there is no record of me calling on the 24th or anyone scheduled to come to my home. So as aim on the phone I pull up Verizon website and there it is showing my call and that there is a service call to my house now showing for 31 of dec I even gave her the ticket number {edited for privacy} and she tried to tell me that if you call a different dept they can't see the notes come on now. All I kept saying to this woman in OVERSEAS is all I need is for the line to be put back on my home. Again lie after lie about it doesn't show I called??? So here it is at 610 pm on the 31 and nope nothing. Sorry I forgot I called yesterday the 30th to confirm someone would be out today as per my ticket and again was assured someone would be here this time I requested to speak to someone in the states and again was played a game with. I have never dealt with such arrogance and ignorance in my life. I can not even find a local contact to call I don't know what to do other than cancel Verizon and advise anyone who will listen how poorly I was not only treated but how inept their so called customer service actually is. And I guarantee they will want payment in full when my bill comes. Any help or advice would be greatly appreciated. Lost in middleport ny

Hi Heather1295,
Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you. Please go to your profile page for the forum and look at the top of the middle column where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under "My Support Cases" you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis, as the agent may be waiting for information from you before they can proceed with any actions. To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe". Please keep all correspondence regarding your issue in the private support portal.

Error when build cube - A duplicate attribute key has been found when processing...

Hi all,
I got an error “Errors in the OLAP storage engine: A duplicate attribute key has been found when processing: Table…” when built new cube. It looks strange in my case. I created a small example to re-produce this error as below:
I create a data source table as below
AgencyName(varchar(50))-----MediaSpend(float)
OE------------------------------------100
Œ-------------------------------------200
Then I create a cube base on this data source with a dimension AgencyName and 1 Measure MediaSpend.
The error happened again. This look link a special case when ‘OE’ and ‘Œ’ existed in a dimension.
Do you have any ideas on this?
Thanks,

Hi khoana,
Here is a similar thread about this topic for your reference, please see:
A duplicate attribute key has been found when processing:
http://social.technet.microsoft.com/Forums/en-US/sqlanalysisservices/thread/7c72639b-a050-4243-9f1d-4da906e981d5/
Regards,
Elvis Long
TechNet Community Support

The arrow at the top Left of the search line has been replaced by a sign which can be used to add bookmarks. How can I restore the arrow at the top left to go back to the previous page?

When Safari is opened on my MacBook Pro, the arrow at the top left ( of the search bar where I type what web site I am searching) has been replaced by the sign + which I can click on to add a bookmark... How can I restore the arrow that I can use to access the previous page?
What should I should do?
Tx

raymond ==
Go up to the main Safari menu bar above, and select "View."
Then when that bar comes down, select "Customize Toolbar."
Then select the arrow icon, and just drag it into your toolbar.

Read Only TextAreas with Carriage Return, Line Breaks and Word Wrapping

Hi all,
I know there are a few posts around this subject but I cannot find the answer to the exact problem I have.
I have a page that has a 'TextArea with Character Counter' (4000 Chars) that is conditionally read only based on the users credentials (using the 'Read Only' attributes of the TextArea item).
When the field is editable (not Read Only) everything works fine but when I make the field Read Only I start to have problems:
The first problem is that the Carriage Return and Line Breaks are ignored and the text becomes one continuos block. I have managed to fix this by adding pre and post element text of pre and /pre tags. This has made the Carriage Return and Line Breaks word nicely and dispaly correctly.
However, it has introduced a second problem. Long lines, with no Carriage Returns or Line Breaks, now extend to the far right of the page with no word wrapping, making my page potentially 4000+ characters wide.
How can I get the field to be display only, with recognised Carriage Returns and Line Breaks, and Word Wrapping inside a fixed width of, say, 150 characters?
Many thanks,
Martin

Hi,
Just a cut and paste of yours with the field name changed:
htp.p('<script>');
htp.p('$x("P3_COMMENTS").readonly=true;');
htp.p('</script>');I also have the following in the page HTML Header, could they be conflicting?
<script type="text/javascript" language="JavaScript">
function setReleaseToProd(wpTypeCode){
//setReleaseToProd($v(this))
var get = new htmldb_Get(null,$v('pFlowId'),'APPLICATION_PROCESS=set_release_to_prod',0);
get.addParam('x01',wpTypeCode);
gReturn = get.get();
if(gReturn) {
$s('P3_RELEASE_TO_PROD',gReturn);
get = null;
</script>I am a long way from knowing much about Javascript (this page code was written by someone else) so all help is much appreciated.
Martin

Error reads as "no stock in returns, line has been processed check mb51"

Similar Messages

Maybe you are looking for