Error :Receiver File Channel not Initialized
Hi all,
I am using a file adapter at the receiver side with file content conversion option. When i post a message it shows an error in the message monitoring as "Reciever File Channel not initialized : Unable to proceed : null"
Please Help.....
Hi,
Check if the adapter is active or
check on this thread:
File Adapter Not Initialized Error
the error might be due to FCC. Jsut remove that and see ift he adapter works.
Regards
vijaya
Similar Messages
-
Error in communication channel " not initialized"
Hi All,
I'm working in FIle to mail scenario. In this scenario whenever i upload a text file to the R/3 application server. that file should be sent (as a attachment with a mail) to any email id. I did all the required configuration in IR. but i'm verymuch confused in ID configuration. I have created both sender and receiver communication channel in the same business system which refers a sender (R/3) System.sender communication channel is working fine. but when i activate the receiver communication channel it shows an error "not initialized".
So kindly let me know,
1. Should i use business system for my receiver end?,If so how do i create it?
2. is receiver agreement, receiver determination, interface mapping necessary? If so, how do i configure it? because i'm not using any recever service since i'm sending mail to my mail box.
note:
It would be very helpful if u refer any link to find out the recever determination and interface determination configuration for this type of scenario.
Thanks & Regards,
hari.Provide us the XML formed after mapping.
make sure that the msg type name is Mail and the name space name is http://sap.com/xi/XI/Mail/30.
regards
krishna -
Error in Receiver File Channel...in MTB module (Urgent)
Hi,
I am working on a Proxy to File scenario. I am using Message Transformation Bean in receiver file channel to convert xml file into fixed length file. I am getting an error : Transform: failed to execute the transformation: com.sap.aii.messaging.adapter.trans.TransformException: Error converting Message: java.lang.Exception: Exception in XML Parser (format problem?):java.lang.NullPointerException'; nested exception caused by: java.lang.Exception: Exception in XML Parser (format problem?):java.lang.NullPointerException
in MTB step of audit log for comm channel.
Please help me resolve this.
Thanks,
JayaHi ,
"Transform: failed to execute the transformation:"
Pls check ur data what u have to send .. any missing information or any special Chacters or any extra fields are available in the data, this type of transformation error raised.
check once again ur mapping transformation and test the mapping in INTEGRATION REPOISTERY with the same data(what u have to send Previously).
and also check ur adapter status in RWB.
Regards,
Sateesh N.
Edited by: Sateesh N on Apr 21, 2008 1:53 PM -
'Use Temporary File' in Receiver File channel
hi all,
I am facing a strange issue with receiver file channel which I am not sure if somene had already faced. I couldnt find any help from blogs..!
I have configured the Receiver File channel with Write mode as 'Use Temporary File' with a temporary file name(say tmp.xml) scheme and Empty-Message Handling set to 'Write Empty File'
When the scenario is executed, its so happening that the temporary file of 0 bytes(empty file) is being created as tmp<msgID>.xml before the actual file is being completely written. It is expected that once the Actual file is completely written, the tmp file should be deleted, but here is not the case.Thus causing both the files being present in the target location. This is not happening often though.
As the receiving application is processing all files from the target direcotry, the file is getting errored out in the target application.
I think the 'Write Empty File' has nothing to do with this as the option 'Write Empty File' is for empty payloads resulting from the message mapping.
Please correct me if am wrong and also provide me the inputs on my issue. Am on PI7.0
thanks in advance,Hi Tilak,
this is real time interface
real time by using a file... that's a non-sens according to me. You should use a non physical solution (web service, JMS, JDBC, etc...) but a not a file. well... Anyway, you can image that the receiver application schedule the folder every 30s or every 1min, that's almost a real time. Real time is mainly a conceptual view (only synchronous exchange needs really real time). Morevoer, if you really wanted a real time, you should not add a tool like PI (or other) between your source and your target system, the more we have systems, the less it's efficient (in term of delay and response time!).
Even if we propose that the receiver application should have a condition to its script to avoid picking the tmp*.xml files, after a period of time there would be a chance that the *tmp files may increase in number..
No ! coz if my theory is good, if your receiver application does not pick-up tmp.xml, that means this file is not currently treated and so PI is authorized to delete it. So no increase of tmp.xml files in this folder.
Another solution: to create the target file without option "temporary", but to create it in another folder than this one scheduled by your receiver application, and use an OS command AFTER processing, in your receiver CC, which move the created file from the "temp" folder to the target folder.
[http://wiki.sdn.sap.com/wiki/display/XI/SAPXIFileAdapterOSCommandLine+Feature]
regards.
Mickael -
I am working on a Mac 10.9.5 with Adobe CS6. My files are locally in Dropbox but once we moved files to network and tried opening the AI - the file would not recognize the original folder location. I tried ignoring the missing images but then I receive the error - The file could not be read due to an error." The same error happens when I try replacing the first missing image. I know the problem lies in the images are linked back to my Dropbox but the AI file doesn't care since it won't let me replace or ignore the image links.
Jasion,
Maybe a bit beside the question, but it is always recommended here to open/save from/to own hard disk, and to copy from/to networks and removable media. You may be lucky, at least for a while, but it is better to be safe than sorry.
In addition to the (far greater) risk of file corruption, some issues are mentioned here:
http://helpx.adobe.com/illustrator/kb/illustrator-support-networks-removable-media.html -
I am working on a Mac 10.9.5 with Adobe CS6. My files are locally in Dropbox but once we moved files to network and tried opening the AI - the file would not recognize the original folder location. I tried ignoring the missing images but then I receive the error - The file could not be read due to an error." The same error happens when I try replacing the first missing image. I know the problem lies in the images are linked back to my Dropbox but the AI file doesn't care since it won't let me replace or ignore the image links.
Jasion,
Maybe a bit beside the question, but it is always recommended here to open/save from/to own hard disk, and to copy from/to networks and removable media. You may be lucky, at least for a while, but it is better to be safe than sorry.
In addition to the (far greater) risk of file corruption, some issues are mentioned here:
http://helpx.adobe.com/illustrator/kb/illustrator-support-networks-removable-media.html -
Receiver File channel for XML files: with carriage return
Hi all,
we are using a receiver FILE channel to generate an XML file that is sent to an external partner.
The XML file looks good in a parser (IExplorer). But in fact there are not carriage return / line feeds between the XML tags
of the XML payload in the file.
Our partner now requires the XML file in a more vertical structure which means: for every tag a separate line (like it is displayed in a parser)
Does anybody know a more general way to convert to a vertical XML structure (so with carriage return line feed).
There is one entry in the SDN dealing with this topic but suggesting using an UDF. I think this is a very specific way.
I don't think it is a good way to change/enhance the message mapping just because of a general formating change.
Is it better to use an XSLT mapping as a second step in the interface mapping or a JAVA adapter module to convert ?
any experiences? suggestions? examples?
Thank you very much
best regards
Hans
examples:
original by XI receiver FILE adapter
<?xml version="1.0" encoding="UTF-8"?>
<MT_batchStatus><type>BS</type><header><message><messageSender>SENDER</messageSender><messageDate>20090723143720</messageDate> ... and so on
required:
<?xml version="1.0" encoding="UTF-8"?>
<MT_batchStatus>
<type>BS</type>
<header>
<message>
<messageSender>SENDER</messageSender>
<messageDate>20090723143720</messageDate>
... and so on>
Hans Georg Walter wrote:
> Is it better to use an XSLT mapping as a second step in the interface mapping or a JAVA adapter module to convert ?
> any experiences? suggestions? examples?
In such a case, the best is to write an generic XSLT or Java mapping that will attempt to do the pretty printing/formatting of the xml.
The advantage of a generic one is that you can reuse the same class/jar for many other scenarios.
so the flow will be as below in your interface mapping;
1. your specific source to target mapping
2. the generic formatting class -
Receiver file channel with ANSI format.
Hi,
I have developed file to file scenario for which sender file format is unicode and receiver file format is ANSI.
There is no FCC at sender and receiver site. In interface we are just bypassing the file in PI, there is no ESR objects.
I have configured sender channel for unicode in following way:
File Type : Text
file encoding : UTF-8
I have configured receiver file channel for ANSI in following way:
File Type : Text
file encoding : i have tried with cp1252 and ISO8859-1
When I run the interface I received receiver file in ANSI format. But when I open that file in notepad the content in the file is having spaces in between 2 characters like below.
V O L 1 0 0 0 0 0 9
Is any bady having idea about this problem?
Thanks.
Edited by: darshana-PI on Jan 23, 2012 6:32 PMHi,
The blanks in your target file might be created because your source file is encoded with UTF-16, not UTF-8. Try using one of these as an encoding in sender communication channel:
UTF-16BE (16-bit Unicode character format, big-endian byte order)
UTF-16LE (16-bit Unicode character format, little-endian byte order)
UTF-16 (16-bit Unicode character format, byte order)
Hope you'll find this useful,
Greg -
Getting Error: Config file does not have IDStore WLS Administrator Username
I am configuring OIM/OAM in HA mode following the EDG:
- Enterprise Deployment Guide for Oracle Identity Management
- 11g Release 1 (11.1.1.5)
I am at step
- 10.4.5 Creating Users and Groups for Oracle WebLogic Server
I am executing this command:
- idmConfigTool.sh -prepareIDStore mode=WLS input_file=wls.props
Where wls.props has these values:
IDSTORE_HOST: admin.mycompany.com
IDSTORE_PORT: 389
IDSTORE_BINDDN: cn=orcladmin
IDSTORE_USERNAMEATTRIBUTE: cn
IDSTORE_LOGINATTRIBUTE: uid
IDSTORE_USERSEARCHBASE: cn=Users,dc=mycompany,dc=com
IDSTORE_GROUPSEARCHBASE: cn=Groups,dc=mycompany,dc=com
IDSTORE_SEARCHBASE: dc=lispa,dc=local
POLICYSTORE_SHARES_IDSTORE: true
and I am getting this error:
Config file does not have IDStore WLS Administrator Username
Any idea why ?I have added to the property files:
IDSTORE_SYSTEMIDBASE : cn=systemids,dc=mycompany,dc=com
But its not solving the issue.
Here is the log:
Jun 3, 2013 10:01:55 AM oracle.idm.automation.util.Util setLogger
WARNING: Logger initialized in warning mode
Jun 3, 2013 10:01:59 AM oracle.idm.automation.impl.oid.handlers.OIDIntegrationHandler validateInputParams
SEVERE: Config file does not have IDStore WLS Administrator Username
Please advise on how to resolve this issue -
When trying to change ringtone I keep getting the error message file type not supported.
I have downloaded some ringtones fro VZ Tones and when I go to make them the default it gives me the error message file type not supported. If I go to my storage and try to look at pictures, it tells me the same thing.
That's definitely odd CrystiDawn, and I understand it can be quite frustrating. Let's get to the bottomof this. What device make and model phone do you have? Did you receive a text message with a link to download the ringtones? If so, once downloaded, please go to all your Apps, locate "Files" and play the ringtone using the media player. You will have the option to set it as ringtone while playing and pressing the menu icon. Were the pictures taken from the phone or transferred using the USB cable?
AdaS_VZW
Follow us on Twitter at @VZWSupport -
Error "The file could not be written"
Hi!
'm tyring to export some pictures in lightroon but I receive the error "The file could not be written".
Any suggestion?
ThanksMake sure you have permission to write to the output folder and that there is enough space on the disk.
What OS are you running? What version of Lightroom?
Hal -
RW-00023: Error: DBC file was not created- When try to install 11i on OEL5
I got an erorr in the appl-top log file as below, also my installation wizard showing post installation checks did not succeed. Please advice.....:-)
DBC File Check
RW-00023: Error: - DBC file was not created:
File = /d01/oracle/visappl/fnd/11.5.0/secure/VIS_oracleapp1/vis.dbc
HTTP Check
checking URL = http://oracleapp1.srini.co.uk:8000
RW-50015: Error: - Portal is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
RW-50015: Error: - Portal is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
JSP Check
checking URL = http://oracleapp1.srini.co.uk:8000/OA_HTML/jsp/fnd/fndhelp.jsp?dbc=/d01/oracle/visappl/fnd/11.5.0/secure/VIS_oracleapp1/vis.dbc
RW-50015: Error: - JSP is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
PHP Check
checking URL = http://oracleapp1.srini.co.uk:8000/OA_HTML/US/ICXINDEX.htm
RW-50015: Error: - Login Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
JSP Check
checking URL = http://oracleapp1.srini.co.uk:8000/OA_HTML/jsp/fnd/fndhelp.jsp?dbc=/d01/oracle/visappl/fnd/11.5.0/secure/VIS_oracleapp1/vis.dbc
RW-50015: Error: - JSP is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
PHP Check
checking URL = http://oracleapp1.srini.co.uk:8000/OA_HTML/US/ICXINDEX.htm
RW-50015: Error: - Login Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.Hi JD,
I am able to fix this issue.....:-) Thanks for your help JD.
As per the Metalink note 747424.1, i replaced all occurances of LD_ASSUME_KERNEL with XD_ASSUME_KERNEL only in DB-tier, but not in the Apps tier. So this was causing the
above issue in the instalation of oracle 11i on OEL5
--Once again i alter and replaced all occurances of LD_ASSUME_KERNEL with XD_ASSUME_KERNEL in both the files....
(db tier)
<DB_HOME>/appsutil/bin/adgetlnxver.sh (did it earlier)
(apps tier)
<APPL_TOP>/ad/11.5.0/bin/adgetlnxver.sh
--run the autoconfig in apps tier with completed successfully result (and also generated the DBC files)
--run the adstrtal.sh and retry the rapidwiz once more. ( Oracle Discoverer services VIS_oracleapp1 - addisctl.sh - this one is Failed)
--This time everything checked OK in the instalation wizard. -
HTTP Error 404 :File does not exist
Hi all,
On Test instance we are not able to open the help file,it give an error
HTTP Error 404 :File does not exist
can anybody have solution for this
it's very urgent
Thanks
shekharI have changed the note server definition in the external app to add the mail directory in front of the mail file name 'mail/mufile.nfs' and I get the following error:
05/04/21 15:15:07 lotusnotes: [instance=(null), id=97176201941,7] ERROR: LotusServiceSession: getConfigProperties(): An error occured
while reading/ retrieving the properties from the the configuration file.
05/04/21 15:15:07 lotusnotes: [instance=(null), id=97176201941,7] ERROR: Unhandled exception in SOAP call
oracle.portal.provider.v2.ProviderException: LotusServiceSession: getConfigProperties(): An error occured while reading/ retrieving the
properties from the the configuration file. -
when i download any file it works frequently and downloading start in a second but when i pause the downloading file & after some time when i open it,The downloading not start proper and after some time a message flash 'download error' source file could not be read please try again later or contact the server administrator.
I downloaded the Microsoft Autoruns package and ran it. There are no programs in the LSA Providers tab, and Apple's Bonjour is the only program in the Winsock Providers tab. I also did the "netsh winsock reset" and rebooted. It didn't fix the problem. Any more ideas?
-
Getting error logical file name not maintained adequtely
Hi,
when i execute a z report and press the download botton getting error logical file name not maintained adequtely,see long text.
Below code i wriien. Please somebody help..
DATA: lt_rows TYPE lvc_t_row.
CASE e_ucomm.
WHEN 'DOWNL'.
Determine and construct OS specific file name *
PERFORM get_file_name_for_os.
in the above perform , i wriien
FORM build_file_name USING pf_os
pf_with_file_extension
pf_param_1
pf_format
pf_fname.
DATA: lf_para1(20) TYPE c.
pf_param_1 hold the materialnr with leading zeros not prefered in *
download file name *
WRITE pf_param_1 TO lf_para1.
CALL FUNCTION 'FILE_GET_NAME'
EXPORTING
CLIENT = SY-MANDT
logical_filename = 'Z_MATERIAL_BOM_FILE'
operating_system = pf_os
parameter_1 = lf_para1
PARAMETER_2 = ' '
PARAMETER_3 = ' '
USE_PRESENTATION_SERVER = ' '
with_file_extension = pf_with_file_extension
USE_BUFFER = ' '
IMPORTING
EMERGENCY_FLAG =
file_format = pf_format
file_name = pf_fname
EXCEPTIONS
file_not_found = 1
OTHERS = 2
Error handling.
CASE sy-subrc.
WHEN '1'.
MESSAGE e014(ba) WITH 'Z_MATERIAL_BOM_FILE'. "error message i am getting LEAVE.
WHEN '2'.
MESSAGE e213(ky) WITH 'Z_MATERIAL_BOM_FILE'.
LEAVE.
ENDCASE.Hi.
In file txn,
click on "Logical File Name Definition, Cross-Client" from the left.
Then click position and check for your logical file name.
If you dont get it, it means you need to create it. You can click on New Entries to create.
Thanks
Mani
Maybe you are looking for
-
Can I get my ringtones off my old iphone, to my new iphone?
I bought a new iphone. I did the backup and restore, and everything is good, but I don't have any of my ringtones on my new phone. How can I get them without having to buy them again?
-
Can you please provide me some useful material on ALE and iDocs
-
We am not able see security groups in MSAD from Shared Services
hi gurus, User is actually upgraidng from 9.2 planning to 9.3.1 . so he has ran the import/export utility where he had users and group on the 9.2 system in an active directory. (MSAD) .. but after migrating the users/groups, he is only able to see th
-
Photoshop elements organizer trouble
I installed, reinstalled, rebooted and the organizer still won't open. when I clisk on the tab nothing happens.
-
Purchaser Order Locking Problem In PROXY interfaces
Hello Experts, Scenario is as follows landscape is : NON SAP system ->> PI --> ECC Documents flowing is Purchaser order create and change Problem is like when i receive same purchase order for change in few fraction of seconds and multiple time as i