Error recovery for bootstrap?
Hi all,
I am new in Weblogic. I use it bcos my company is developing
kind of gateway program which will connect to a Weblogic (shall
I call it M3?) server using CORBA and C++
The problem I have encountered is that, normally what will be
done is
create bootstrap -> Factory Finder -> Factory -> remote object.
Bcos I wanna have some error recovery logic, what make me
confusing is that, shall I re-create the bootstrap?
I have done some simple testing and seems that even the server
side is down, I can create remote object instance using the original
bootstrap. However, it is failed in the actual environment.
I tried to delete the bootstrap and recreate it, but I am afraid of,
bcos my program is multi-threaded, I wonder if removing the
bootstrap will cause the remote object generated by the old bootstrap
become void?
Shall I use only one bootstrap in the program, or shall I keep one
bootstrap for each thread? (I tried to keep one for each thread, but
seems that it always cause unexpected error...)
Where can I find more information on this topic?
Thanks a lot
Sorry, some more information :)
the "error recovery" I am mentioning is
something like re-establishing connection
to the server after the server is shutting
down /crashing and then up again.
"Adrian" <[email protected]> wrote in message
news:[email protected]..
Hi all,
I am new in Weblogic. I use it bcos my company is developing
kind of gateway program which will connect to a Weblogic (shall
I call it M3?) server using CORBA and C++
The problem I have encountered is that, normally what will be
done is
create bootstrap -> Factory Finder -> Factory -> remote object.
Bcos I wanna have some error recovery logic, what make me
confusing is that, shall I re-create the bootstrap?
I have done some simple testing and seems that even the server
side is down, I can create remote object instance using the original
bootstrap. However, it is failed in the actual environment.
I tried to delete the bootstrap and recreate it, but I am afraid of,
bcos my program is multi-threaded, I wonder if removing the
bootstrap will cause the remote object generated by the old bootstrap
become void?
Shall I use only one bootstrap in the program, or shall I keep one
bootstrap for each thread? (I tried to keep one for each thread, but
seems that it always cause unexpected error...)
Where can I find more information on this topic?
Thanks a lot
Similar Messages
-
I m using SQL Server 2012 Developer Edition. Even I tried 2012 express and enterprise edition but all
gave same error. I browsed msdn blog. But nothing help me out.
Below is the error log details--
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2013-10-21 12:58:05
End time: 2013-10-21 13:52:30
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for DQ: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: CROY-TOSH
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: C:\Users\CRoy\Downloads\SQL Server 2012 Developer Edition (x86 and x64) - DVD (English)\x64\setup\
Installation edition: Developer
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLSERVERAGENT
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AI
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Data
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: NT Service\MSSQLServerOLAPService
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: CRoy-TOSH\CRoy
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: ROY
CLTRESULTDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir\
CLTSTARTUPTYPE: Manual
CLTSVCACCOUNT: NT Service\SQL Server Distributed Replay Client
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\WorkingDir\
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\ConfigurationFile.ini
CTLRSTARTUPTYPE: Manual
CTLRSVCACCOUNT: NT Service\SQL Server Distributed Replay Controller
CTLRSVCPASSWORD: <empty>
CTLRUSERS: CRoy-TOSH\CRoy
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, RS_SHP, RS_SHPWFE, DQC, BIDS, CONN, IS, BC, SDK, BOL, SSMS, ADV_SSMS, DREPLAY_CTLR, DREPLAY_CLT, SNAC_SDK, MDS
FILESTREAMLEVEL: 2
FILESTREAMSHARENAME: MSSQLSERVER
FTSVCACCOUNT: NT Service\MSSQLFDLauncher
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT Service\MsDtsServer110
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: SharePointFilesOnlyMode
RSSVCACCOUNT: NT Service\ReportServer
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AI
SQLSVCACCOUNT: NT Service\MSSQLSERVER
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: CRoy-TOSH\CRoy
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: SQL Server Data Tools
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Master Data Services
Status: Passed
Feature: Distributed Replay Client
Status: Passed
Feature: Distributed Replay Controller
Status: Passed
Feature: Integration Services
Status: Passed
Feature: Data Quality Client
Status: Passed
Feature: Analysis Services
Status: Passed
Feature: Reporting Services - SharePoint
Status: Passed
Feature: Reporting Services Add-in for SharePoint Products
Status: Passed
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\SystemConfigurationCheck_Report.htmHi,
This 3rd time I followed this link. But nothing new, same error.
Can you please tell me how to do follow, I cannt do the 1st step, how to change the local system to windows level account, vice-versa. It is shown mine as
Server Configuration Manager(Local)
From here I folllowed the steps ---[I cannt insert link/image :-(]
SQL 2008/R2 setup fails with "Wait on the database engine recovery handle failed"
If I right clicked on SQL Server Service, there is no option to change the account.
Hello,
Thanks for your patience,did you tried stesp mentioned in below article
http://blogs.msdn.com/b/sqljourney/archive/2012/03/16/sql-2008-r2-setup-fails-with-quot-wait-on-the-database-engine-recovery-handle-failed-quot.aspx
To resolve it, follow these steps:-
When the installation throws this error, click on OK and allow it to proceed. It will fail for Database Engine, but the SQL Server service should have
been created. Check the Services console.
If the service is present, perform the following steps:-
1. Go to SQL Server Configuration manager, right click on the SQL Server service, and change the service account (if it is local system, give
it a windows level account, and vice-versa). It might throw a WMI error but you will see the account getting updated anyway. If not, then use the Services console. Change the account for SQL Agent as well.
Use this link to change sql server service account
http://technet.microsoft.com/en-us/library/ms345578.aspx
2. Next, try to start the service. It should come online.
3. However, you will not be able to log in to the SQL Server
4. Now stop the service and start it from the command prompt using -m -c -T3608 parameters.
5. Now try logging in to the server using admin connection from sqlcmd (sqlcmd admin:<server name>\<instance name> ...)
6. Once logged in, use the sp_addsrvrolemember '<domain\username>','sysadmin'.
Also add the builtin/administrators to the sysadmin role
7. Now stop the service from the command prompt and start it from SQL Server configuration manager
You should be able to log in to the server now.
Hope this helps someone.
Please revert if it helps or even if it does not
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
HT201263 how to fix error 9 for recovery
How do I fix error (9) for recovery in i tunes?
Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software. -
Need suggestion on implementing JMS message error recovery
Hi,
Our application has a JMS topic where we publish application events. Now, there can be scenarios where the consumers cannot process the message due to some infrastructure issues and would error out. We need a way so that those messages can be reprocessed again later. we are thinking of the following design for JMS message error recovery
1. Use a persistent TOPIC (this would ensure guaranteed delivery)
2. Configure a error destination on JMS topic e.g a jms queue
3. Have an error handling MDB listening to the Error destination. An error handling MDB would dequeue the errored messages from error destination and persist it to a Data base "error" table..
4. Provide a mechanism to republish those messages to topic (e.g a scheduler or admin ui or a command line utility) .. The messages would deleted from database "error" table and published to topic again....
A. Are there any issues with the above design which we need to handle?
B. Are there any additional steps required in a Cluster environment with a distributed topic and distribute error destination? (our error mdb will have one-copy-per-application setting)
B. From a performance angle, Is it OK to use persistent TOPIC ? Or will it better to persist the message to the db table and then publish it as a non persistent message ... ? (But i guess the performance should be more or less the same in both of these approaches)
C. Are there any other recommended design patterns for error recovery of JMS messages
Please advise.
Regards,
ArifThanks Tom !
We may not be able to go with the approach of delaying/pausing redelivery of the messsage because
1. Pausing entire MDB approach: Our MDB application consumes messages generated by different producers and our MDB needs to continue processing the messages even if messages corresponding to one producer is erroring out
2. Redelivery delay : This would only delay the retry of an errored message. But there would still be a problem if the message fails during all retries (i.e redelivery limit count). We don't want to lose this message. In our case, It is possible that a particular message cannot be processed due to unavailability of a third party system for hours or may be a day.
Basically, i am looking on approaches for a robust and performant error recovery/retry framework for our application (refer details in my first post on this thread) while fully making use of all features provided by middleware (WLS). Please advise.
Regards,
Arif -
I am installing SQL Server 2012 Developer (from ISO image written on DVD), my machine has Windows 7 (Edit: Windows 7 with service pack 1) on it. This machine already has SQL Express and SQL 2008 R2 Express installed in it.
On running 2012 setup it goes fine from Setup Support Rules to Installation Progress. In Installation Progress after some progress installation fails.
Windows show the following components couldn't installed:
Managment Tools Complete Failed. Client Tools Connectivity Failed. Client Tools SDK Failed. Client Tools Backwards Compantibility Failed. Managment Tools Basic Failed. SQL Server Data Tools Failed. Reporting Services -Native Failed. Database Engine
Services Failed. Data Quality Services Failed. full-Text and Semantic Extractins for Search Failed. SQL Server Replication Failed. Integration Services Failed. Analysis Services Failed. SQL Client Connectivity SDK Failed.
In detail for failure of every component it provide these details:
Action required:
Use the following information to resolve the error, and then try the setup process again.
Feature failure reason:
An error occurred for a dependency of the feature causing the setup process for the feature to fail.
In summary log file it provide the following details:
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2068643839
Start time: 2012-07-31 16:23:37
End time: 2012-07-31 16:33:32
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for Adv_SSMS: Use the following information to resolve the error, and then try the setup process again.
Next step for Conn: Use the following information to resolve the error, and then try the setup process again.
Next step for SDK: Use the following information to resolve the error, and then try the setup process again.
Next step for BC: Use the following information to resolve the error, and then try the setup process again.
Next step for SSMS: Use the following information to resolve the error, and then try the setup process again.
Next step for BIDS: Use the following information to resolve the error, and then try the setup process again.
Next step for RS: Use the following information to resolve the error, and then try the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, and then try the setup process again.
Next step for DQ: Use the following information to resolve the error, and then try the setup process again.
Next step for FullText: Use the following information to resolve the error, and then try the setup process again.
Next step for Replication: Use the following information to resolve the error, and then try the setup process again.
Next step for IS: Use the following information to resolve the error, and then try the setup process again.
Next step for AS: Use the following information to resolve the error, and then try the setup process again.
Next step for SNAC_SDK: Use the following information to resolve the error, and then try the setup process again.
Machine Properties:
Machine name: Haansi-PC
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
SQL Server 2005 SQLEXPRESS MSSQL.1
Database Engine Services 1033 Express Edition
9.4.5000 No
SQL Server 2005 SQLEXPRESS MSSQL.1
SQL Server Replication 1033 Express Edition
9.4.5000 No
SQL Server 2005 SQLEXPRESS MSSQL.1
SharedTools 1033
Express Edition 9.4.5000 No
SQL Server 2005
Tools 1033
Express Edition 9.4.5000 No
SQL Server 2005
ToolsClient 1033
Express Edition 9.4.5000 No
SQL Server 2005
ToolsClient\Connectivity 1033 Express Edition
9.4.5000 No
SQL Server 2008 R2 SQLSERVER08EXPR2 MSSQL10_50.SQLSERVER08EXPR2 Database Engine Services 1033
Express Edition 10.50.1617.0 No
SQL Server 2008 R2 SQLSERVER08EXPR2 MSSQL10_50.SQLSERVER08EXPR2 SQL Server Replication 1033
Express Edition 10.50.1617.0 No
SQL Server 2008 R2
Management Tools - Basic 1033 Express Edition
10.50.1617.0 No
SQL Server 2012
LocalDB 1033
Express Edition 11.0.2318.0 No
SQL Server 2012
Reporting Services - SharePoint
11.0.2100.60 No
Package properties:
Description: Microsoft SQL Server 2012
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: F:\x64\setup\
Installation edition: Developer
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLAgent$SS2012
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Data
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: TABULAR
ASSVCACCOUNT: NT Service\MSOLAP$SS2012
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Manual
ASSYSADMINACCOUNTS: PC\Haansi
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Automatic
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20120731_161013\ConfigurationFile.ini
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: false
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, BIDS, CONN, IS, BC, SDK, SSMS, ADV_SSMS, SNAC_SDK
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$SS2012
FTSVCPASSWORD: <empty>
HELP: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SS2012
INSTANCENAME: SS2012
ISSVCACCOUNT: NT Service\MsDtsServer110
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: NT Service\ReportServer$SS2012
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Manual
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT Service\MSSQL$SS2012
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: Haansi-PC\Haansi
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20120731_161013\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Client Tools Connectivity
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Client Tools SDK
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Client Tools Backwards Compatibility
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Management Tools - Basic
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: SQL Server Data Tools
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Integration Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Analysis Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: SQL Client Connectivity SDK
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20120731_161013\SystemConfigurationCheck_Report.htmPlease help.
I did what you suggested, but, still got error message to install SQL server data tools: Here is the log.
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2068037632
Start time: 2014-09-29 15:05:38
End time: 2014-09-29 15:15:55
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for SSDTBI_VS2012: Use the following information to resolve the error, and then try the setup process again.
Machine Properties:
Machine name: MSBI
Machine processor count: 4
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered Configured
SQL Server 2008 Management Tools - Basic
1033 Express Edition 10.0.1600.22 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Database Engine Services 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER SQL Server Replication 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Full-Text and Semantic Extractions for Search 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Data Quality Services 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSAS11.MSSQLSERVER Analysis Services 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSRS11.MSSQLSERVER Reporting Services - Native 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Management Tools - Basic
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Management Tools - Complete
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Client Tools Connectivity
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Client Tools Backwards Compatibility
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Client Tools SDK
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 SQL Server Data Tools
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Integration Services
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Reporting Services - SharePoint
11.0.2100.60 No Yes
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
Installation location: C:\9f7a58aa5d6d76ffe6be968a4ad339f5\x86\setup\
Installation edition: Express
Slipstream: True
SP Level 1
Patch Level: 11.1.3128.0
Product Update Status:
Success: KB 2674319, KB 2793634
Product Updates Selected for Installation:
Title: Service Pack 1
Knowledge Based Article: KB 2674319
Version: 11.1.3000.0
Architecture: x86
Language: 1033
Title: SQL Server 2012 SP1 GDR Product Update
Knowledge Based Article: KB 2793634
Version: 11.1.3128.0
Architecture: x86
Language: All
Update Source: MU
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: <empty>
AGTSVCPASSWORD: <empty>
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SSDTBI_VS2012, SNAC_SDK
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTANCEID: <empty>
INSTANCENAME: <empty>
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: <empty>
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: <empty>
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: true
TCPENABLED: 0
UIMODE: AutoAdvance
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files (x86)\Microsoft SQL Server\110\Setup Bootstrap\Log\20140929_150412\ConfigurationFile.ini
Detailed results:
Feature: SQL Server Data Tools - Business Intelligence for Visual Studio 2012
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft Visual Studio Tools for Applications 2012
Component error code: 0x80044000
Component log file: C:\Program Files (x86)\Microsoft SQL Server\110\Setup Bootstrap\Log\20140929_150412\VSTA2012_LangsSupport_Cpu32_1.log
Error description: VS Shell 2012 installation has failed with exit code -2147205120.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3436.0&EvtType=VSTA2012_LangsSupport%40Install%400x-2147205120
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files (x86)\Microsoft SQL Server\110\Setup Bootstrap\Log\20140929_150412\SystemConfigurationCheck_Report.htm -
Advice on best way to setup Disaster Recovery for SOA Suite 10.1.3.4
Hi Everyone,
I need some advice on the best way to setup Disaster Recovery for a SOA Suite 10.1.3.4 install deploying JSF/ADF OC4J applications.
The way we are trying to do it at the moment is manually copy the "applications" and "applications-deployments" folders for the OC4J application on the production server, then compress and ship the files across to the DR application server nightly. (We don't require high availability).
In the event of a disaster we then extract the files and copy to the OC4J instance (pre-created and configured) on the DR server. Unfortunately to date we haven't been able to reliably setup a DR application (seem to mostly get 404 errors etc), even though the OC4J application has its connection pool resolved to the DR database and is showing as "up" in the ASConsole.
My question is, is there a more "native" way to do what we are trying to do. We do not have Enterprise version of SOA Suite or 11g database so any advanced recovery features are not an option. The setup is also stand alone, i.e. we are not using clustering or RAC etc.
Any ideas would be really helpful.
Thanks,
Leigh.
PS we are also running the production apps server with Oracle Application server 10g 10.1.2.3.0 as the HTTP apache server (with Forms, Reports and Discoverer deployed) and the SOA Suite 10.1.3 applications use the 10.1.2 HTTP server via the HTTP to AJP bridge. So the 10.1.3 OC4J instance is configured to use AJP on port range 12501 - 12600.For enterprise solutions, AS Guard would work.
http://download.oracle.com/docs/cd/B25221_04/core.1013/b15977/disasrecov.htm#sthref303
However, since advanced recovery options are not available (as you said), then what you are doing should not be too bad.
AMN -
Satellite C640D 64-Bit Windows 7 Windows Error Recovery
Model PSC36L-003003 SN XXXXXXXXX
Boot is set to hard drive first and CDRW second.
Turn on the computer
8 seconds later it goes to Windows Error Recovery.
When I choose Launch Startup repair, it goes straight to Windows Boot manager. See #6.
When I choose Windows start normally, it goes to “Starting Windows”. After several minutes, it recycles to Windows Error Recovery Screen and then to Windows Boot Manager screen. See #6.
If I choose neither, it goes to Windows Boot manager; Windows failed to start; Status: 0xc000000e Info: The boot selection failed because a required device is inaccessible. I do not have the Windows Installation disc.
Action taken:
Created a Window 7 64-bit system repair disk on another computer.
Changed bios boot to CDRW first and hard drive second and saved.
Inserted System repair disk into CD drive.
Turned on computer and pressed any key.
Windows loaded files from repair CD disk.
A Windows blue background screen with leaves appears without Windows logo (not the blue screen of death); files load and cursor appears; CD stops running; but nothing else happens with screen for eight hours.
I do not have the Windows Installation disc.
Please, what do you think is wrong with the computer or what should I do next? Your help will be greatly appreciated. How do I confirm that it is Windows 7 32 or 64 Bit? I am trying to fix this for my friend who probably bought it in the Indonesia area. Thank you in advance.
[Moderator edit to remove serial number.]Satellite C640D-1064U (PSC36L-003003)
Downloads are here.
Windows loaded files from repair CD disk. A Windows blue background screen with leaves appears without Windows logo (not the blue screen of death); files load and cursor appears; CD stops running; but nothing else happens with screen for eight hours.
Something wrong with that repair disc or the hardware. The bitness of Windows on the hard drive should not matter at this point. I would burn another disc and try again.
Never seen a blue background with leaves. Can you snap a photo for us?
-Jerry -
HP Pavilion dv6 1334us won't start after windows update, stuck in Error Recovery
My computer is an HP Pavilion dv6 1334us with 32bit-windows 7. The computer did automatic updates and when it started up said there was another one avaliable through WIndows Updater. I installed the update and it said the computer needed to restart for the update to take effect. I choose to restart and the computer wouldn't boot back up, it boots to the 'Windows Error Recovery' screen where my options are 'Launch Startup Repair (recommended)' and 'Start Windows Normally'. When I select the repair, it says it loads windows files, then goes back to the error recovery screen. When I choose to start normally, it freezes the second it trys to start, flashes a blue screen and then returns to the Error Recovery page again.
Please follow the steps in the following document to troubleshoot and fix the boot issue that you are facing.
Overview of Troubleshooting Startup Problems (Windows 7, Vista, XP): http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01443371&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
Please let me know the results so that I can try helping you further. Thank you.
!-------------------Please click the white star in the blue box to give KUDOS if this answer was helpful or clarified your question or issue.
If my answer solved the issue, then please click on the Accept as solution button. Thank you-----------------------------------------------------------------!
I am an HP Employee but I am not speaking on behalf of HP. The opinions and views that I express here are my own. -
Disaster Recovery For SAP ECC 6.0 On Oracle
Hi All,
This is our infrastructure
Windows 2003 Server
SAP ECC 6.0
Oracle 10
Legato Networker Client / Library
Actually our Backup Strategy is to do an Online Backup Every Night from monday to saturday. We want to test our backup by doing a Restore. We are assuming a complete loss of the system including hardware.
What we do:
1. Install the SAP System on a new host with the same hardware characteristic of the source system.
2. Install & Configure the legato utility.
3. Copy the E:\oracle\MIS\sapbackup\ directory from the source system to the test system.
4. Them we put the database in mount mode.
5. Execute the command: brrestore -b bdyxwoqv.fnf -m full (bdyxwoqv.fnf-> Full Online Backup that was executed without problems).
It gives the following errors:
BR0386E File 'F:\ORACLE\MIS\SAPDATA2\SR3_10\SR3.DATA10' reported as not found by
backup utility
BR0386E File 'F:\ORACLE\MIS\SAPDATA3\SR3700_9\SR3700.DATA9' reported as not foun
d by backup utility
BR0280I BRRESTORE time stamp: 2008-10-01 17.45.19
BR0279E Return code from 'backint -u MIS -f restore -i E:\oracle\MIS\sapbackup\.
rdyybrzp.lst -t file -p E:\oracle\MIS\102\database\initMIS.utl': 2
BR0374E 0 of 63 files restored by backup utility
BR0280I BRRESTORE time stamp: 2008-10-01 17.45.19
BR0231E Backup utility call failed
BR0406I End of file restore: rdyybrzp.rsb 2008-10-01 17.45.19
BR0280I BRRESTORE time stamp: 2008-10-01 17.45.19
BR0404I BRRESTORE terminated with errors
Since this is a new SAP system it never will find the SAPDATA files because they where on the source system and this is a new test system.
We found the following note:
96848 Disaster recovery for SAP R/3 on Oracle
But this note is for SAP R/3 no for SAP ECC!
It explain that you have to install your SAP system with the System Copy Method (is this the only way??).
2.) Installation of the R/3 System
The installation of SAP software contains the software installation of the database. The initial SAP database should be created again but the SAP data should not be loaded.
Install the SAP system with the Oracle-specific system copy method, which is based on backup/restore. This method is described in the system copy guide for your Product/Release. Refer to Note 659509 for products that are based on Web AS.
3.) Modification of the installation
Above all, you must take into account the mounted file systems at the time of the loss. If necessary create new SAPDATA directories (mount points). These generally identify a disk or a logical storage area (logical volume).
Are we working in the right way? maybe there is a formal procedure to do a Restore from an Online backup when you complete loss your system.
Please some tips.
Best Regards,
Erick IlarrazaHi Eric,
Thanks a lot for your reply, I will follow the Note 96848 Disaster recovery for SAP R/3 on ORACLE point 5.
5.) Restore profile and log files, as you sayed in case of disaster we will lost our "source" system.
On the other hand to configure the legato client we take care of the name of the server, we configured the .sap, .cfg and .utl files so in theory the restore will be done on the new test system since we run the brrestore command from that system.
Officially there is not a documentation from SAP to do a Restore from a Online Backup with SAP ECC, SAP Netweaver (ABAP / ABAP + Java). You only have the 96848 note??? I found the following information:
http://help.sap.com/saphelp_nw70/helpdata/en/65/cade3bd0c8545ee10000000a114084/frameset.htm
But there is not a official procedure like a System Copy Guide or Installation Guide.
Best Regards,
Erick Ilarraza -
HP G62 Windows Startup error recovery Failure
Notebook:
HP G62 - 228CL
Running Windows 7 64-bit
Hello everyone, I need a bit of help.
My computer will boot windows 7. When I start it up, it tries to boot up. I then get a Windows failed to boot message on the windows error recovery screen and asks me if I would like to use Windows Startup Repair Tool to fix the Problem. But the tool never starts up. It just leads to a windows background and does nothing. I have also tried using f11 System recovery but it does nothing.Hi,
Firstly, regarding your existing files.
One possible way to try and retrieve your files from a non-booting drive is to follow the process detailed in the link below. The Ubuntu operating system CD you create can run from the CD alone ( ie it doesn't have to install on the Hard Drive ) and I've often found it to be successful in retrieving data even from a failing Hard Drive. When you've created the CD, follow the instructions and see if you can back up your existing files.
http://www.howtogeek.com/howto/windows-vista/use-ubuntu-live-cd-to-backup-files-from-your-dead-windo...
Secondly, regarding the replacement of the Hard Drive.
The drive on the link below is an example of one that would be fine for your notebook.
500Gb Hard Drive
The procedure to replace the Hard Drive starts on Page 52 of your Maintenance & Service Guide.
Once done, simply use your Recovery DVDs to reinstall the Operating System on the new drive - the procedure is described in the HP document Here.
If you don't have your Recovery Discs, you can order a replacement set using the link below.
Order HP Recovery Discs.
If you have any problem with this link, order them directly from HP.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
Best regards and happy holidays,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
Help me, pls! Getting Windows Error Recovery of windows 7
Hi, my computer is in problem. It's Windows Error Recovery. Then, I did the steps by computer,I clicked the Startup Repair(Recommanded). A startup repair window appears and it scans the problems. It's scanning, I waited for several hours.. but it's scanning and scanning endlessly! It says "recovering disk error,this might take over an hour to complete".. yeah, more than an hour, I waited for five hours, nothing changed..scanning and scanning... What should I do?....
Hi,
Try tapping F8 on startup to check if it loads to Safe Mode..If it loads to Safe mode then you can perform a System Restore...Also check the hard drive by tapping F2 on startup..
OR,
Try the steps mentioned in the link below:
Actions when specific error messages display
Note:
If you have HP Support Assistant installed on the computer(The Blue Question Mark) then open it ==> Complete all pending Updates & Tuneups==> Restart and Check. It may solve your problem
Although I am an HP employee, I am speaking for myself and not for HP.
**Click on “Kudos” Star if you think this reply helped** Or Mark it as "Solved" if issue got fixed. -
Sql...forward error recovery
in the recovery technique know as forward error recovery, on the detection of a particular error in a system, the recovery procedure consists of adjusting the state of the system to recover from the error. Can such a technique be used in a DBMS to recover from the system crashes with the loss of volatile storage? thank you.
Randy,
This sounds like an issue with the BRTOOLs then. 1722 is a rare error where the SQL statement attempts to convert a string into a number - like a date in this instance.
You may need to open a ticket with SAP Support and have them look at the issue, as you may need a fix for the toolset itself.
Sorry I could not be of more assisatance Randy.
-Tim -
Windows Error Recovery Windows 7
I have a late 2006 iMac 24" and I simply can't complete the installation of windows 7 on it. I am caught in a Windows Error Recovery screen loop, it just keeps restarting and go back to that screen. I have tried just about everything I can think of and have tried everything suggested in my search for a solution. Can anyone help or even just tell me that my iMac model isn't compatible......
Satellite C640D-1064U (PSC36L-003003)
Downloads are here.
Windows loaded files from repair CD disk. A Windows blue background screen with leaves appears without Windows logo (not the blue screen of death); files load and cursor appears; CD stops running; but nothing else happens with screen for eight hours.
Something wrong with that repair disc or the hardware. The bitness of Windows on the hard drive should not matter at this point. I would burn another disc and try again.
Never seen a blue background with leaves. Can you snap a photo for us?
-Jerry -
Hi Alex,
My script always fails due to a timeout issue when invoking a CAS comman in Siebel functional test.
How can I use error recovery methods to ignore this particular error and prevent my test from failing?
Thanks in advance.
Here is the code where it fails:
// CAS command that causes and exception although it gets performed almost immediately
try
siebelFT.button(
169,
"/siebelft:cas[@ClassName='SiebApplication' " +
"and @RepositoryName='Siebel Power Communications']" +
"/siebelft:cas[@ClassName='SiebScreen' and @RepositoryName='Orders']" +
"/siebelft:cas[@ClassName='SiebView' and @RepositoryName='Order Entry - Line Items View (Sales)']" +
"/siebelft:cas[@ClassName='SiebApplet' and @RepositoryName='Jawwal Order Entry - Order Form Applet Dashboard (Sales)']" +
"/siebelft:cas[@ClassName='SiebButton' and @RepositoryName='BSubmit']")
.*click()*;
catch (Exception e) {
System.out.println("****Submit Click Exception");
// Console Output after running this code
****Submit Click Exception
01:32:37,335 ERROR [1] Iteration 1 failed at line (script.java:231). Error(-3) submitting CAS command: Timeout in CAS.Submit
oracle.oats.scripting.modules.siebelFT.common.api.internal.exceptions.SiebelFTException: Error(-3) submitting CAS command: Timeout in CAS.Submit
at oracle.oats.scripting.modules.siebelFT.api.cas.AbstractSiebelFTElement.invokeCASMethodDirect(AbstractSiebelFTElement.java:607)
at oracle.oats.scripting.modules.siebelFT.api.cas.AbstractSiebelFTElement.invokeCASMethod(AbstractSiebelFTElement.java:582)
at oracle.oats.scripting.modules.siebelFT.api.cas.AbstractSiebelFTElement.invokeCASMethod(AbstractSiebelFTElement.java:552)
at oracle.oats.scripting.modules.siebelFT.api.cas.AbstractSiebelFTElement.invokeEvent(AbstractSiebelFTElement.java:678)
at oracle.oats.scripting.modules.siebelFT.api.cas.Button.click(Button.java:61)
at script.run(script.java:231)
at oracle.oats.scripting.modules.basic.api.IteratingVUser.run(IteratingVUser.java:311)
at oracle.oats.scripting.modules.basic.api.internal.IteratingAgent.run(IteratingAgent.java:631)
at java.lang.Thread.run(Thread.java:619)Hi Alex,
I have the SiebelFT method and I tried to increase it to 120 and even 300, but nothing has changed. The timeout error appears a few seconds after the CAS command is executed, and the scipt continues to run properly after the exception is thrown, but at the end it fails with the timeout error message.
I have been trying to solve this out with Oracle support team now for more than 2 months, and nothing worked so far. I am starting to have the feeling that my case is hopeless.
Please help me in this, it is blocking a lot of my work.
Thanks -
Hi,
plz any body tell me the best method of error recovery in bdc both in call transaction and bdc session, since data is in huge ammount and in excel sheet.
plz give me answer in full details, bcaz i am is in big trouble uploading around 40 lakh line of data in implementation project.
thanks and regards
vijay dwivediHi Vijay,
The general practice is that you for such huge data, BDC session is the better option. When you create the session using the program, you can go to sm35 and process it at a later stage. Once the processing is done, an error log is created automatically with all the records that have failed. YOu can then analyse the reason for the error by running a few of those records in E mode(Error screen mode) correct the data and reprocess the error records.
Regards,
Ravi
Maybe you are looking for
-
BroseForDirectory() crashes Indesign.
Hi All, when i am trying to call browseForDirectory() method from my extension it carshes the indesign, I am a newbee in extension development, please suggest. I am also handling select and cancle events in my code. for reference i am also posting th
-
Hello, I have formated my media card twice and satred over with putting only media on it and it still locks up my phone, any suggestions on what to do next?
-
Last night, a lowlife thief rifled through my car and stole my OLD iphone 3GS. The phone had been deactivated after I upgraded to my iPhone 4 several months ago. I suspect the battery was dead as well, but they stole my car charger, too. Here's my qu
-
I have "Show console" enabled in my Java Preferences Panel and the latest version of Java from Oracle installed. Running Mavericks 10.9.3. For some reason my Java console is not showing up?
-
How do I add additional folders to my email? such as for receipts, specific job, etc.