Error Related with SL & Excise

Hi Pankaj/Ashok/Priyanka,
I have two issues which is unanswered,plz look into it.
this is the case of 103/105 Movt. type. in both scenarios.
1. During UD storage location is not getting populated automatically whereas i have done the standard setting for plant & movement type103/104/105/106.
2. PO is cost center based & excisable.
after GR cancellation when I am using standard method to cancel excise invoice it is not getting reverse.
a. Cancellation of GR, Here itself part1 will also get reverse.
b. Using J1IEX --> Post the Excise Invoice.
c. Using J1IEX --> cancel the Excise Invoice so that we can use the same excise no.
whereas it is working perfectly in case 101 movt. type.
plz help me to resove this issue.
Worm Regards
Manoj Singh
9777299580

Hi Priyanka,
Thanks for your kind reply,
Let me tell you my requirement.
While doing GR w.r.t PO for Movement type 103.
following transaction is taking place.
1. Excise capture/posting is taking place.
2. Material is getting posted to GR block stock type.
3. Inspection lot is also getting generated.
4. For this inspection lot , Result recording and UD transaction is taking place, while doing UD, Relevent UD code is being given and in Inspection lot Screen, material qty. has to be posted to Unrestricted Stk. and Storage location field has to be populated automatically.which is not happening.
I believe that much of information is enough to understand my requirement.
now please help me to resolve this critical issue.
Regards
Manoj

Similar Messages

Failed to add app with security error related with c2wts

Right now, we are facing some weird issue when adding our app to customer's SharePoint site. When site collection admin clicks our app to add it, he would get a popup page with title "Access Required" and message "Sorry, you
don't have access to this page", however he is already site collection admin.
At the SharePoint logs, we saw the following exceptions:
SPSecurityContext: Could not retrieve a valid windows identity for username 'company\user' with UPN '[email protected]'. UPN is required when Kerberos constrained delegation is used. Exception: System.ServiceModel.FaultException`1[System.ServiceModel.ExceptionDetail]: WTS0003: The caller is not authorized to access the service. (Fault Detail is equal to An ExceptionDetail, likely created by IncludeExceptionDetailInFaults=true, whose value is: System.UnauthorizedAccessException: WTS0003: The caller is not authorized to access the service.
at Microsoft.IdentityModel.WindowsTokenService.CallerSecurity.CheckCaller(WindowsIdentity callerIdentity)
at Microsoft.IdentityModel.WindowsTokenService.S4UServiceContract.PerformLogon(Func`1 logonOperation, Int32 pid)
at SyncInvokeUpnLogon(Object , Object[] , Object[] )
at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs)
at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin(MessageRpc& rpc)
at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage5(MessageRpc& rpc)
at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage31(MessageRpc& rpc)
at System.ServiceModel.Dispatcher.MessageRpc.Process(Boolean isOperationContextSet))..
(note, I changed the user name to some generic name there)
after that, we also saw another exception:
No windows identity for company\user
Access Denied. Exception: Attempted to perform an unauthorized operation., StackTrace:
at Microsoft.SharePoint.Utilities.SPUtility.HandleAccessDenied(Exception ex)
at Microsoft.SharePoint.SPAppPrincipalPermissionsManager.UpdateAppOnlyPolicy(SPAppPrincipalInfo appPrincipal, Boolean allowAppOnlyPolicy)
at Microsoft.SharePoint.ApplicationPages.AppAuthorizePageBase.GrantAppAccess()
at Microsoft.SharePoint.ApplicationPages.AppInvPage.BtnAllow_Click(Object sender, EventArgs e)
at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error)
at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb)
at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus)
at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) .
I did some reading over the SharePoint code and also searched over internet, I found out this link:
Adding App Causes Security Error where the similar error is thrown as well and he fixed the issue by reconfiguring the c2wts services. His issue is slightly different from mine. In his case, end users won't be able to add in the first time
and they would get "You Can't Add This App Here" message while in our case the error is thrown during adding the app.
Why we would need the c2wts services here for adding an app if user is already logged in SharePoint via windows authentication? Could someone confirm that would be the root cause for this failure since I also see the stack related " at Microsoft.SharePoint.SPAppPrincipalPermissionsManager.UpdateAppOnlyPolicy(SPAppPrincipalInfo
appPrincipal, Boolean allowAppOnlyPolicy)", just wonder if AppOnlyPolicy=true which our app requires has anything to do with this as well. Again, I could not find anything related article about that specific configuration is required to allow app with
AppOnlyPolicy.
Another weird thing is that it only happens at sites with managed path. At root site, the app could be added without any problem.
Any suggestions are highly welcome and really appreciated. This is on a big customer. :-) Thanks in advance for your insights.

This issue can occur when you change the name of the "Application Name" within Visual Studio, then deploy to BizTalk with the new name. Problems is the DLLs are still assocaited with that earlier deployment name in BizTalk. So go into BizTalk
Admin Console, then navigate to: BizTalk Group - Applications - Then for each application check the "Resources" folder. Under one of these folders you should see your DLLs are already assigned to one of these other BTS apps. So you need to
delete the resources from the app (or delete the other apps) then your new deployment name will work.

When I conect any ipod ,the itunes show an error msg-The syncServer found a problem and must be closed.After that another-Mobile device helper find a problem and must be closed -and this repeat more 2 times each are related with corefoundation.dll.

Six error msg about apple aplications that must be closed just when I connect my ipod to computers USB.SyncServer aplication and Mobile device helper is closed.The error relat.show :
AppName: syncserver.exe AppVer: 17.641.14.26 ModName: corefoundation.dll
ModVer: 1.550.54.0 Offset: 00043d08
These happens in both kind of messages that was showing three times each.After this ,Itunes can sinc music videos,photos,but I canot upgrade my ipod!
Detail:copy photo files from ipod to computer works normal.I use panda antivirus but without it in the computer,the problem persists.Yesterday I get the last ITunes,but the problem persists.I unistall anything about apple ,install the new Itunes and the problem remains.
And this problem occurs only after I connect ANY ipod to the computer,open Itunes for hear music,for example,still works OK.

I have been battling against the same issue for over 2 weeks now. After tracing what was happening on the machine to find that the crashes we're happening slightly after Apple's program we're identifying the Time Zone of the computer, I had the idea of checking the date/time properties of my Windows XP machine.
I unchecked the box to update the time from a time server (Internet time) and it's seem that this was what was causing itunes and its descendant to crash.
Now it seems it turned back to normal operation.
Please let me know if this fixes it for you as well.

Error while posting depot excise invoice

Dear SAP Experts,
We are continually facing the following error while posting "Depot
Excise Invoice" on Production sever
"Error in allocating Depot Invoice number interval not found Number
object J_1IDEPINV"
Message no is 8I336
We have already maintained the number interval for the above object i.e
J_1IDEPINV with respective series group 62.
Here is the business process:
1. First, we make transfer posting thr MB1B. We get material doc no
2. Second, we make selection for RG23D for this material doc thr J1IJ.
RG 23D register gets updated
3. Third, we make verify/post thr J1IJ itself. Here we are getting the
error when we post it.
Please do needful.
Its an urgent isue
Regards
Tushar

hello,
In transaction SNRO check number range for object J_1IDEPINV. There you choose number intervals abd check number intervals.
Regards
Kedar Kulkarni

Error while saving the excise invoice

Hi All,
I am getting the following error while saving the excise invoice.
No account is specified in item 0000000001
Message no. F5670
Diagnosis
No account was specified for account type "S" in item "0000000001" of the FI/CO document.
System Response
The Financial Accounting program cannot process the document.
Procedure
A system error has probably occurred in the application you called up. Check the data transferred to item "0000000001" of the FI/CO document.
I have read all the posts with regards to the error before, however still after doing the required settings I am getting the error. Please let me know for the same.
Kind Regards
Atul Keshav

Dear All,
The issue stands resolved please find below the required settings which need to be done.
You need to maintain the following entries in J_1ITRNACC table
100 DLFC 01 CR PLAAED
100 DLFC 01 CR PLABED
100 DLFC 01 CR PLACESS
100 DLFC 01 CR PLASED
100 DLFC 01 CR PLAAT1
100 DLFC 01 CR RG23AAt1
100 DLFC 01 CR RG23AED
100 DLFC 01 CR RG23BED
100 DLFC 01 CR RG23SED
100 DLFC 01 DR MSUSP
Also the table J_1ITRNACC should include entries for GRPO, CAPE, DIEX, EWPO,
TR6C with subtransaction type 01.
We need to maintain GL Accounts accordingly in the table J_1IEXCACC.
If still the error persists then you need to apply the following notes.
1018071
978186
1032813
The SAP note 1032813 contains the correction for the program MJ1IINF01
you will have to apply this manually.
Kind Regards
Atul Keshav

Lightroom 5: All photos now "Error working with this photo"

I went back to my lightroom catelog, where a lot of my photos are all on my NAS, and now all the photos are unable to be edited. "There was an error working with this photo."
Everything was working for awhile, but now every single photo is erroring out.
In the finder, i still see the photos perfectly fine. I even opened up the good 'ol Photo Mechanic 5 and opened a contact sheet, and these photos still worked. So it's not like they're corrupted or completely gone.
I created another new lightroom catelog, and tried to import the photos again. But when I select the directory the photos are in, it's empty for about 10 minutes, then shows all the photos but with "Preview unavailable for this file."
The big caveat are all these photos are on a networked NAS (Synology). I'm accessing it over WiFi which is probably the biggest problem.
The folder was mounted as a NFS folder. It was disconnected once when I had a power outage (damn wind). I since re-mounted the folder and all that. I'm not entirely sure if that's what did it or if these errors started happening after that or not. But I've moved photos to my NAS folder in my catalog just today, and they are now erroring as well. So it's not like the older ones are erroring. Just all of them are.
Mac OSX - Mavericks 10.9
32GB Ram / 3.4GHz Intel Core i7
Lightroom 5
Files are all: DNG/ARW/NEF

I'm sorry I can't be more helpful, but there are lots of messages in the forums about Lightroom problems specifically related to Synology NAS.
Have you spoken to Synology about this?

Error while doing J1IH (Excise JV) - TR6 Challan posting

I am getting the following error while doing, J1IH (Excise JV) - TR6 Challan posting
Please assist....
Short text
    The COMMIT WORK processing must not be interrupted.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLFACS" had to be terminated because it h
    come across a statement that unfortunately cannot be executed.
What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
Error analysis
    During the COMMIT WORK statement, the following are executed:
    - the routines registered with the statement PERFORM .. ON COMMIT,
    - the registered methods for the events of the object services
      and
    - possibly the local update (SET UPDATE TASK LOCAL).
    An exception was raised and caught. The normal sequence of the routines
    was interrupted by this resulting in the program being continued before
    the call of COMMIT WORK. As this can lead to inconsistencies, the
    processing cannot be continued in the normal way.

Thanks Milind...
I am also getting the following error:
Balance in transaction currency
    Message no. F5702
Diagnosis
    A balance has occurred in transaction currency 'INR' with the following
    details:
    Exchange rate '00', amount '       500,000.00' and currency key 'INR'.
    The data in the transaction currency were transferred from the calling
    application.
System Response
    Your data cannot be processed in FI.
Procedure
The error is probably in the calling application.
Please assist

Issue related to the Excise Postings

Issue related to the Excise Postings
My Scenario is i have an Purchase Order with Excise Duty of 16.48%
For Eg: Net Price(1000) + Excise Duty (16.48%) = Rs.1164.8
my vendor gives me a Modvat of 10% i.e Rs.104.8
but i have to pay him the total amount (i.e with excise)=Rs.1164.8
How to do the GR with Excise & Invoice Verification??
Wat amount will be Credited to vendor???
How to do Excise Posting for this Scenario???
Thanx & Regards,
Kumar Rayudu
Message was edited by:
Kumar Rayudu

Hiii Ramakrishna,,
User doesnt know at the Time of Purchase Order that how much excise & Modvat will be getting. Only the Gross value is given in the Purchase order including all
taxes ( No Tax Code in the Purchase Order).
Excise Invoice and Vendor's Bill are received when the Materials are received.
They will get the Modavat according to the Excise Invoice of the Manufacturer
Now while doing GR i manually give the Excise BED & Cess given in the Manufacturer Excise Invoice.
Post the Excise Invoice before doing MIRO.
The Problem is in the MIRO Transaction.
At the MIRO i have selected the Tax Code with Excise.
System is caluclating the the Excise on the PO Value i.e more than the value in the Vendor Excise Invoice (Part 1 & Part 2) and the Liablity of vendor is increased and the difference amount is posted to the material.
Everything is going fine except the Vendor's liability and it should be value of the Purchase Order.
How the system is caluclating the Value ???
am i doing any wrong procedure???
Explain me???
Thanx & Regards.
Kumar Rayudu

Step by Step documents for Process Chain Error Handling with Screen Shots

Hi
Is anybody having Step By Step Documents for Process Chain Error Handling with Screen Shots ?. Please forward it to me to my e-mail [email protected] . I will reward points to u immediately.
bye
Aamira Khan

Hi,
You can find lots of topic related to process chain issues in SDN.Please make a search in SDN.
https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_library&query=process+chain&adv=true&sdn_author_name=&sdn_updated_on_comparator=ge&sdn_updated_on=&sortby=cm_rnd_rankvalue
Regards.

More No of GRN with single excise invoice

Dear Sir
we want to do goods receipt for 4 lots with single excise invoice.we have done multible goods receipt with multi credit settings in J1id for that perticular material.we tried to do goods receipt with reference to out bound delivery NO.first lot we done GRN with out any issue,For second lot we put a same Excise invoice NO,At the time System is giving error like This excise invoice all the items are recived. Any other option is there to to multible GRN with same excise invoice
Please help me in this
Thanks
Maruthi S

Hi
I have single line Item in PO & MIGO
This Is case of Pet Coke , Relience importing this Pet Coke & we are purchasing from relience
Supplier is provoiding actual excise invoice after 15 or 20 days of material supply
as soon as we received material we are doing Goods Receipts for 15 days then for all GRs we receive
single excise invoice after 15-20 days then . I want to capture & POst excise invoice for all GR , but as
per you suggetion in part 2 there are multiple entries for the single excise invocie , which is not correct
as per excise rule ,
please provide some solutions
thansk

EASIM error 016 with BPP creation

Can anyone help me pinpoint why a BPP can't be created. I'm pretty sure it's data related because it's not a widespread problem.
It's a new contract that has received it's first invoice, when using EK92 to create the BPP it errors out with a simulation error.
Error occured during Billing Simulation Service.
(EASIM) 016 Simulation of contract 300582973 for bill. order
The contract can be simulated with EA00, so I don't understand why its not working for the BPP.
I searched on the error number and couldn't find anything with the xsearch tool.
All tips appreciated.
Thanks
Astrid

Just a guess,
Calendar of 2013 may be required so that number of installments can be increased in future which have dates in 2013.
Thanks,
Murtuza

Query HR: error execution with infotype custom

Hello!
Can you help me?
In upgrade to ECC 6.0, when I create a query with an Infotype custom, I see this error: "Error when generating the report" (long text is about "AQ_AD_HOC221").
Thanks,
Manu

Hi Manu,
I executed the above mentioned program RPUMS40CCI by putting flag on above mentioned fields but I am still getting the error *Error when generating the report ( see long text ) *
My custom infotype has currency field. Due to think its something related with currency field.
Please let me know if u have any clue.
Palak

Reg an error related to default organization dn

Hi,
We created a Test DC in our environment., dc=test,dc=alpha,dc=com , but the actual default organization dn was dc=alpha,dc=com.
And recently we deleted the Test DC, dc=test,dc=alpha,dc=com, from which we started getting errors related to provisioning profile,
When i tried checking the synchronization status , it is throwing error , cause it is taking the wrong organization dn value,
oidprovtool operation=STATUS \
> ldap_host=oidtest.bpweb.bp.com ldap_port=3060 \
> ldap_user="cn=orcladmin" \
> application_dn="orclApplicationCommonName=sid6853,cn=EBusiness,cn=Products,cn=OracleContext,dc=alpha,dc=com"
Please enter the LDAP password:
Please enter the Interface connection information (Press Enter key for empty value):
oracle.ldap.util.UtilException: NamingException encountered when resolving subscriber - DEFAULT = dc=test,dc=alpha,dc=com
        at oracle.ldap.util.Subscriber.resolve(Subscriber.java:591)
        at ora cle.ldap.util.Subscriber.<init>(Subscriber.java:372)
        at oracle.ldap.util.Subscriber.<init>(Subscriber.java:321)
        at oracle.ldap.util.RootOracleContext.getSubscriber(RootOracleContext.java:378)
        at oracle.ldap.util.provisioning.ProvisioningCmdArgs.computeDefaultValues(ProvisioningCmdArgs.java:243)
        at oracle.ldap.util.provisioning.ProvisioningProfile.ProfileHandler(ProvisioningProfile.java:632)
        at oracle.ldap.util.provisioning.ProvisioningProfile.main(ProvisioningProfile.java:1019)
Unable to resolve Organization : oracle.ldap.util.UtilException: NamingException encountered when resolving subscriber - DEFAULT = dc=test,dc=alpha,dc=com
But if i explicitly specify the organization dn, then it works correctly,
oidprovtool operation=STATUS \
> ldap_host=oidtest.bpweb.bp.com ldap_port=3060 \
> application_dn="orclApplicationCommonName=sid6854,cn=EBusiness,cn=Products,cn=OracleContext,dc=alpha,dc=com" \
> organization_dn="dc=alpha,dc=com" \
Please enter the LDAP password:
Please enter the Interface connection information (Press Enter key for empty value):
Inbound profile status details:
orclODIPProfileLastAppliedAppEventID: -4
orclODIPProfileProcessingStatus: Event Propagation Successful
orclODIPProfileLastProcessingTime: 20140115164253
orclODIPProfileLastSuccessfulProcessingTime: 20140115164253
Outbound profile status details:
orclLastAppliedChangeNumber: 4799005
orclSubscriberDisable: 0
orclODIPProfileProcessingStatus: Event Propagation Successful
orclODIPProfileLastProcessingTime: 20140115164304
orclODIPProfileLastSuccessfulProcessingTime: 20140115164304
So it seems the DEFAULT organization dn value is still stored in some locaiton from where oidprovtool using the wrong value ?
Could you please let me know how to point out to the correct organization dn ?
Regards,
Karthiga

Thanks J,,, Your suggestion helped to find another way.
its resolved now..
1. Searched for the entry:
ldapsearch -h oidtest.bpweb.bp.com -p 3060 -b "cn=common,cn=products,cn=oraclecontext" -s base "cn=*" orcldefaultsubscriber
version: 1
dn: cn=Common,cn=Products,cn=OracleContext
orcldefaultsubscriber: dc=test,dc=alpha,dc=com
2. Created test.ldif file with the below entry:
dn: cn=common,cn=products,cn=oraclecontext
changetype: modify
replace: orcldefaultsubscriber
orcldefaultsubscriber: dc=alpha,dc=com
Executed modify command:
ldapmodify -h oidtest.bpweb.bp.com -p 3060 -D "cn=orcladmin" -w XXXXXXXXXXXXX -f test.ldif
3. Again searched for the value and it shows the right one now.
ldapsearch -h oidtest.bpweb.bp.com -p 3060 -b "cn=common,cn=products,cn=oraclecontext" -s base "cn=*" orcldefaultsubscriber
version: 1
dn: cn=Common,cn=Products,cn=OracleContext
orcldefaultsubscriber: dc=alpha,dc=com
4. And checked provisioning and it is working fine now
oidprovtool operation=STATUS \
> ldap_host=oidtest.bpweb.bp.com ldap_port=3060 \
> ldap_user="cn=orcladmin" \
> application_dn="orclApplicationCommonName=sid6853,cn=EBusiness,cn=Products,cn=OracleContext,dc=bp,dc=com"
Please enter the LDAP password:
Please enter the Interface connection information (Press Enter key for empty value):
Inbound profile status details:
orclODIPProfileLastAppliedAppEventID: -2
orclODIPProfileProcessingStatus: Event Propagation Successful
orclODIPProfileLastProcessingTime: 20140116120049
orclODIPProfileLastSuccessfulProcessingTime: 20140116120049
Outbound profile status details:
orclLastAppliedChangeNumber: 4808806
orclSubscriberDisable: 0
orclODIPProfileProcessingStatus: Event Propagation Successful
orclODIPProfileLastProcessingTime: 20140116120046
orclODIPProfileLastSuccessfulProcessingTime: 20140116120046
Regards,
Karthiga

Several errors related to recovery of A305-s6837

Hey everyone, had to use the recovery disks for my mom's laptop and am encountering several errors post-recovery.
1. The first error? is that everytime Windows is loaded I get a box labeled System Preparation 3.14 toolbox, it hangs around for a few seconds and then disappears.
2. When windows loads, I get a auto-installer trying to load "Toshiba Desktop links". It does this everytime I load the software.
3. next, it will pop-up a box checking for network connection and warning box that requires wireless and lan lines to be disconnected. If you try to cancal the error, it will keep popping up until you turn it off and then back on.
When windows reloads, notepad opens up and I get what looks to be an error relating to "CheckFM" and/or "InstallFM".
4. Get an error message that Windows cannot find C:\b27238e.exe
5. Had to turn the user account's off because the administer account had a password that was different than the one I had on it pre-crash.
What had happened was that the computer was freezing up within 3-4 minutes of loading. It didn't matter what program you loaded, it would freeze. Anyway, any suggestions would be very helpful. Thanks...

i cannot update to service pack 2. In short, nothing from microsoft is installing.
it is asking me to authenticate microsoft windows installer
i have a Windows requries a digitally signed driver
Those symptoms are consistent with restoring to a drive with advanced-format technology. See my post here.
Is this a replacement drive? If so, what is the make and specific model?
this is not a hardware issue.
If this is the trouble, I would certainly call it a hardware issue.
-Jerry

"unable to acquire rendered frame" error message with AE CS6 Motion Tracker

Hi Everyone,
I am having issues with the built in tracking software in After Effects CS6. Everytime I hit "analyze" I receive the error message "unable to acquire rendered frame" or it simply remains at "0% (frame 1 of 70)". Sometimes I get the message "unable to obtain dynamiclink server connection". I've tried different types of footage, re-started, re-installed the software, deleted (emptied) the database and caches, started a fresh composition, and even did a fresh install of OSX but nothing works. Any ideas? I've searched a lot of forums on this and I've seen the problem in similiar situations (same error message with Warp Stabilizer analysis) but nobody seem to have found any resolution.
I'm running AfterEffects CS6 on Mac OS 10.8.
Processor 2.93 GHz Quad-Core Intel Xeon
Memory 8 GB 1066 MHz DDR3 ECC
Graphics ATI Radeon HD 4870 512 MB
Downloaded all the latest updates.
Done all the usual emptying of caches, repaired disk permissions, re-installation of software, etc.
Any help would be very much appreciated.
Thank you.

What firewall/antivirus software are you using?
After Effects communicates with the background camera tracker process using TCP, and some overly aggressive firewall/antivirus software can block this communication. That may be the problem in your case.
See this document for a closely related issue:
http://helpx.adobe.com/x-productkb/multi/startup-screen-hangs-premiere-after.html

Error Related with SL & Excise

Similar Messages

Maybe you are looking for