Error running a Copy Package from BPF (BPC7.5)

Hi all,
I'm on BPC75 NW SP09, and Iu2019m trying to run the standard u201CCopyu201D package through BPF but it gives me following error message: IMMEDIATE RUN: Error occurred while trying to run the package on the server Data not found in table (UJD_PACKAGES2). It works fine when I run manually/directly in Data Manager.
Here my BPF settings: Interface: Data Manager; Task: RUN SPECIFIC PACKAGE; PACKAGE: Copy; FILE: /CPMB/COPY; TEAM: Company; GROUP: Data Management
I have searched other related threads to validate my configuration and I have also checked the table UJD_PACKAGES2 but it seems to be okay. The only thing that I noticed is that it does not have the TEAM populated in this table.
Any idea on how to resolve this issue? Your comments/suggestions are very much appreciated.
Thanks,
Heverton
Edited by: Heverton Oliveira on Jan 13, 2012 9:24 PM

Similar Messages

Getting an error running an SSIS package from SQL server agent

This is the first time I'm running an SSIS package in SQL server agent.
I'm running a SQL server agent job and getting this error message:
Am I using the correct options? (options list below)
Message
Executed as user: SITEX\stxdatasqlexec. Microsoft (R) SQL Server Execute Package Utility Version 10.50.1600.1 for 32-bit Copyright (C) Microsoft Corporation 2010. All rights reserved.    Started: 1:42:00 PM Error: 2014-04-17
13:42:01.01     Code: 0xC0011007     Source: {B72BF421-785A-44EC-9570-D2A40B046CA7}      Description: Unable to load the package as XML because of package does not have a valid XML format. A
specific XML parser error will be posted. End Error Error: 2014-04-17 13:42:01.02     Code: 0xC0011002     Source: {B72BF421-785A-44EC-9570-D2A40B046CA7}      Description: Failed
to open package file "C:\Users\halexandrovich\Documents\Nbr_Rolls_base.dtsx" due to error 0x80070003 "The system cannot find the path specified.". This happens when loading a package and the file cannot be opened or loaded correctly
into the XML document. This can be the result of either providing an incorrect file name was specified when calling LoadPackage or the XML file was specified and has an incorrect format. End Error Could not load package "C:\Users\halexandrovich\Documents\Nbr_Rolls_base.dtsx"
because of error 0xC0011002. Description: Failed to open package file "C:\Users\halexandrovich\Documents\Nbr_Rolls_base.dtsx" due to error 0x80070003 "The system cannot find the path specified.". This happens when loading a
package and the file cannot be opened or loaded correctly into the XML document. This can be the result of either providing an incorrect file name was specified when calling LoadPackage or the XML file was specified and has an incorrect format. Source:
{B72BF421-785A-44EC-9570-D2A40B046CA7} Started: 1:42:00 PM Finished: 1:42:01 PM Elapsed: 0.047 seconds. The package could not be found. The step failed.
Here are the options I'm using:
package source - file system
data source destination = my SQL server db
execution option - use 32 bit runtime
command line entry:
- /FILE "C:\Users\halexandrovich\Documents\Nbr_Rolls_base.dtsx" /CONNECTION DestinationConnectionOLEDB;"\"Data Source=esxdspr-sql01.sitex.com;Initial Catalog=SuesTbls;Provider=SQLNCLI10;Integrated Security=SSPI;Auto Translate=false;\""
/CONNECTION SourceConnectionFlatFile;"\\sitex.com\dfs\Production\SFTPData\LPSEFTProcess\FromAADFS\Rpt_Nbr_Rollsperbatch_20140331_20_0.txt"
/X86 /CHECKPOINTING OFF /REPORTING E
I checked the filename so it must be the XML format it's complaining about.

Thank you, pituach.
I tried running the package using just my c drive without partition, C:\Nbr_Rolls.dtsx, but still getting the same
error. I do not see any option on this site to post my package. I know it's not the path that's the issue. Our support desk already fixed that because I was getting a different message before.
Message
Executed as user: SITEX\stxdatasqlexec. Microsoft (R) SQL Server Execute Package Utility Version 10.50.1600.1 for 32-bit Copyright (C) Microsoft Corporation 2010. All rights reserved.    Started: 11:23:00 AM Error: 2014-04-18
11:23:00.44     Code: 0xC0011007     Source: {2BEE62EB-DD08-4867-9F5C-660167964650}      Description: Unable to load the package as XML because of package does not have a valid XML format. A
specific XML parser error will be posted. End Error Error: 2014-04-18 11:23:00.45     Code: 0xC0011002     Source: {2BEE62EB-DD08-4867-9F5C-660167964650}      Description: Failed
to open package file "C:\Nbr_Rolls.dtsx" due to error 0x800C0006 "The system cannot locate the object specified.". This happens when loading a package and the file cannot be opened or loaded correctly into the XML document. This can be the result of
either providing an incorrect file name was specified when calling LoadPackage or the XML file was specified and has an incorrect format. End Error Could not load package "C:\Nbr_Rolls.dtsx" because of error 0xC0011002. Description: Failed
to open package file "C:\Nbr_Rolls.dtsx" due to error 0x800C0006 "The system cannot locate the object specified.". This happens when loading a package and the file cannot be opened or loaded correctly into the XML document. This can be the result of
either providing an incorrect file name was specified when calling LoadPackage or the XML file was specified and has an incorrect format. Source: {2BEE62EB-DD08-4867-9F5C-660167964650} Started: 11:23:00 AM Finished: 11:23:00 AM
Elapsed: 0.125 seconds. The package could not be found. The step failed.

Getting Error while Execute SSIS Package from Console Application

Dear All,
SSIS package working fine directly.
I got following error while execute SSIS package from C# console application.
The connection "{79D920D4-9229-46CA-9018-235B711F04D9}" is not found. This error is thrown by Connections collection when the specific connection element is not found.
Cannot find the connection manager with ID "{79D920D4-9229-46CA-9018-235B711F04D9}" in the connection manager collection due to error code 0xC0010009. That connection manager is needed by "OLE DB Destination.Connections[OleDbConnection]"
in the connection manager collection of "OLE DB Destination". Verify that a connection manager in the connection manager collection, Connections, has been created with that ID.
OLE DB Destination failed validation and returned error code 0xC004800B.
One or more component failed validation.
There were errors during task validation.
Code :
public static string RunDTSPackage()
Package pkg;
Application app;
DTSExecResult pkgResults;
Variables vars;
app = new Application();
pkg = app.LoadPackage(@"D:\WORK\Package.dtsx", null);
Microsoft.SqlServer.Dts.Runtime.DTSExecResult results = pkg.Execute();
I have recreate the application with again new connection in SSIS.
Still not working, Please provide solution if any one have.
DB : SQL Server 2008 R2
Thanks and regards,
Hardik Ramwani

The connection "{79D920D4-9229-46CA-9018-235B711F04D9}" is not found. This error is thrown by Connections collection when the specific connection element is not found.
Cannot find the connection manager with ID "{79D920D4-9229-46CA-9018-235B711F04D9}" in the connection manager collection due to error code 0xC0010009. That connection manager is needed by "OLE DB Destination.Connections[OleDbConnection]"
in the connection manager collection of "OLE DB Destination". Verify that a connection manager in the connection manager collection, Connections, has been created with that ID.
Are you sure that you are running the same package via .NET which works fine from Visual Studio?
By reading error message, I can say that you have copied OLEDB task from another package OR you have deleted one OLEDB connection manager. Now when package is run this task tries to use the connection manager and not found thus throws error message.
Open all OLEDB destination tasks and you find connection manager missing. Connection Manager name should be provided there
Cheers,
Vaibhav Chaudhari
MCSA - SQL Server 2012

Re : Run oracle DB packages from OBIEE

Hello there,
Hope all is well. I was just wondering how do you run Oracle DB Packages from OBIEE ? How do I say EXEC package.procedure or package.function ?
Thanks in advance,
Sam

Hi..
Hope as you said.. use package.procedure or package.function in evaluate.. function
OR
if you go physical layer.. and try to create New Physical table..
Select Table type as Select and try to call your package function here...
Sorry to say this i didn't work on this.. but try and report back..
See my post Re: Calling Stored Procedure for Date Conversion ... for understanding .. this some what.
Thanks & Regards
Kishore Guggilla
Edited by: Kishore Guggilla on Dec 17, 2008 12:07 PM

Run-time Error '429' when copying queries from one userid to a new userid

Hello,
One of the users is having an issue when copying queries from an old user id to a new user id.
She is getting the visual basic run-time error '429' - active x component can't create object while copying.
This is not consistent. From what I can tell, this does not appear to be a bex query designer issue but something in microsoft.
Please let me know either way. I have found minimal posts on this issue. Most that I have found are outside the sdn forum and talk about registry issues?
Thank you,
Lynda

According to your error message, your onClick function declaration line closes the parenthesis twice... you may have a typo in what you actually put in the file versus what you think you put...
function onClick()event:MouseEvent):void{

ERROR WHILE MIGRATING SSIS PACKAGE FROM DEVELOPMENT TO PRODUCTION IN EXECUTION

HI,
I have a problem while executing the package after migrating from DEVELOPMENT to PRODUCTION.
We have two SQL database connections DEVMIDDLEWARE and PRODMIDDLEWARE for dev and prod respectively. When we have created package in development we have used DEVMIDDLEWARE and we have credentials in CONFIG file of that package and executed sucessfully. When
we migrated this same package to PRODUCTION when have given credentials of PRODMIDDLEWARE in CONFIG FILE of this package we are getting error as below
"Description: Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic
error. Verify that the correct key is available. End Error Error: 2014-10-28 07:41:44.24     Code: 0xC0016016     Source:       Description: Failed to decrypt protected XML node
"DTS:Password" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available.
End Error Error: 2014-10-28 07:41:44.85     Code: 0xC0202009     Source: Package Connection manager "DEVBIZTALKDB01.RHUL_Staging.devmiddleware"     Description: SSIS Error Code DTS_E_OLEDBERROR.
An OLE DB error has occurred. Error code: 0x80040E4D. An OLE DB record is available. Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80040E4D Description: "Login failed for user 'devmiddleware'.".
End Error Error: 2014-10-28 07:41:44.85     Code: 0xC020801C     Source: Package Log provider "SSIS log provider for SQL Server"     Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER.
The AcquireConnection method call to the connection manager "DEVBIZTALKDB01.RHUL_Staging.devmiddleware" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method
call failed. COM error object information is available. Source: "Package" error code: 0xC0202009 Description: "SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E4D. An OLE
DB record is available. Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80040E4D Description: "Login failed for user 'devmiddleware'.". ". End Error Error: 2014-10-28 07:41:44.98
Code: 0xC0202009     Source: Package Connection manager "AGRDB01.abwr66"     Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E4D. An OLE DB record
is available. Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80040E4D Description: "Login failed for user 'CC\epsdbuser'.". End Error Error: 2014-10-28 07:41:44.98     Code:
0xC020801C     Source: Data Flow Task OLE DB Source [1]     Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "AGRDB01.abwr66"
failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed. End Error Error: 2014-10-28 07:41:44.99     Code: 0xC0047017
Source: Data Flow Task SSIS.Pipeline     Description: component "OLE DB Source" (1) failed validation and returned error code 0xC020801C. End Error Error: 2014-10-28 07:41:44.99     Code: 0xC004700C
Source: Data Flow Task SSIS.Pipeline     Description: One or more component failed validation. End Error Error: 2014-10-28 07:41:45.00     Code: 0xC0024107     Source: Data Flow Task
Description: There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 07:41:44 Finished: 07:41:45 Elapsed: 0.859 seconds. The package execution failed.
The step failed."
Can anyone help for this error.
Many thanx in Advance

Hi Babloo,
According to the error message, the package may have failed are as follows:
The user account that is used to run the package under SQL Server Agent in PRODUCTION server differs from the original package author.
The user account does not have the required permissions to make connections or to access resources outside the SSIS package.
The package may not run in the following scenarios:
The current user cannot decrypt secrets from the package. This scenario can occur if the current account or the execution account differs from the original package author, and the package's ProtectionLevel property setting does not let the current user
decrypt secrets in the package. In this scenario, we can change the SSIS Package ProtectionLevel property to EncryptSensitiveWithPassword, then modify the SQL Server Agent job step command line to include this password.
File access fails because the current user does not have the required permissions to write to the file share that the connection manager accesses. In this scenario, we can create a SQL Server Agent proxy account. This proxy account must use a credential
that lets SQL Server Agent run the job as the account that created the package or as an account that has the required permissions.
References:
SSIS package does not run when called from a SQL Server Agent job step
Run an SSIS Package Under a Different Account
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Error while using Copy Package

Hi,
I want to copy data from category BudgetV1 to BudgetV2,
I have tried to use Copy Package but I always get error with
error message "The file is empty".
Can anyone help me with the problem?
Thanks in advance.

Hi,
Please check if you have data in category BudgetV1. This error normally occurs when there is no data in source specified in COPY package. Make sure to select appropriate members when you specify other source dimensions.
Hope this helps.
Regards,
Shoba

Error with standard Copy package

Hello!!
When I run the standard copy package selecting the option "Replace & clear data values" the execution finishes with status error and I receive the next error message in the log:
Item has already been added. Key in dictionary: '[Invalid time Member] - EN_NONE|DSP_INPUT|2004_UPA_SEPT|' Key being added: '[Invalid time Member] - EN_NONE|DSP_INPUT|2004_UPA_SEPT|'
If I run the package with the option "Merge" it executes OK.
Anybody help?
Thank you in advance
Pedro
Edited by: Pedro de las Heras on Aug 7, 2009 3:16 PM

Hello,
You probalby get this error message beacuse you have not setup the Work Status for this application. Please defined the Work Status you want to use on the appset level and then define the dimensions you want to use to control the work status on the application level. That should solve your issue.
Regards,
Marcel

Run Script Logic/Package from a different Application

Hi Experts,
I have a scenario here that I need to run a package from a different application. For example, I'm in Finance application and I need to run a package which is in the LegalApp application, is it possible to call that package or perhaps run the logic it was calling without having switch back to LegalApp.
Thanks,
Marvin

To run a package that runs logic on another application, you could copy a package such as "Default Formulas" and put the name of the target application in the new package's name. Then go to Modify Package --> Advanced. Edit the package to set the application as below. The LegalApp (for example) is set on the third Task command. Default logic is called on fifth.
PROMPT(RADIOBUTTON,%CHECKLCK%,"Select whether to check work status settings when running logic.",1,{"Yes, check for work status settings before running logic","No, do not check work status settings"},{"1","0"})
PROMPT(SELECTINPUT,,,,%CATEGORY_DIM%%ENTITY_DIM%%TIME_DIM%)
TASK(Execute formulas,USER,%USER%)
TASK(Execute formulas,APPSET,%APPSET%)
TASK(Execute formulas,APP,LegalApp)
TASK(Execute formulas,SELECTION,%SELECTIONFILE%)
TASK(Execute formulas,LOGICFILE,)
TASK(Execute formulas,CHECKLCK,%CHECKLCK%)

Finder error code -36: Copy file from macOS to external HD then copy it back to macOS: got error code -36

Hi all,
I got this error whenever copy file from my external HD to my macbook (internal HD).
For more detail:
last week, i copy a lot of my folder to external HD then i format my macbook to install new MacOSX Maverick.
But when i copy my file back to my laptop, i got a lot of file with message:
The Finder can't complete operator because some data in "some file name here" can't be read or written.
(Error code -36)
I try to research a lot of time on google and apple support communities but i still can not solve this problem.
Someone, please help me and guide me how to solve this error because almost my file is my working data.
Some infomation:
My last version of my macbook: MacOS 10.9.3
New version installed on my macbook: MacOS 10.9.3
I just only copy file from my macbook to external HD without doing anything.
Then i format my macbook to install new MacOS 10.9.3
When i copy my file back, this error is happened.
I try a lot of way like dot_clean, disk utility verified, repair, ....

The files may be from the old user account and not accessible from the new one. I found this article, though see that it may not be current.:
http://support.apple.com/kb/ts1402
Pondini's guide also covers this topic, but it may be hard to find the relevant bit of information.
http://pondini.org/OSX/Transfer.html
In future, use Time Machine or Carbon Copy Cloner to make a complete backup of your system onto an external disk, before doing an erase/install. Then you can use Transfer Assistant to bring your data and apps across.

Error when execute a package from SQL Server Agent

We have the next problem:
When we execute a package from a Job of SQL Server agent, it shows the success messege, but reviewing the results, the package didnt do all the tasks.
When we run it mannually by MSIS the package, it shows the success message and it works fine.
The workflow of the package is :
1) Shrink the databases (executing a sql file)
2) Backup the databases (Back up Database task of MSIS)
3) Rename the files to .BAK extension (by the Foreach loop container and fyle system task)
4) Execute command to compress the it (by a .bat)
5) Move the compress file to another location (by another Foreach loop)
Manually run correct, but when is a a SQL AGent Job that execute the package it does only the first 2 steps.
we are ussing Microsoft SQL Server 2008 R2 (SP1) - 10.50.2500.0 (X64) Jun 17 2011 00:54:03 Copyright (coffee) Microsoft Corporation Enterprise Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)
We are using a user with administrator privilegies
Cheers

Can you check if account running package has proper access. You may need to define a proxy account for that.
See
http://www.databasejournal.com/features/mssql/article.php/3789881/Proxy-Accounts-in-SQL-Server.htm
http://gqbi.wordpress.com/2014/01/30/setting-up-a-proxy-account-to-run-sql-server-integration-services-ssis-2012-packages/
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Error-36 and Error-42 when copying files from SD card

Hello!
I recently switched from a PC user to a mac user! Everything is great, but ever since I got the computer (refurbished 15in macbook pro) ive had problems with copying files from my SD card to my computer!! It so frustrating! Ive tried everything! I even called apple support, and after 30 minutes of calling came to no solution! I keep getting error-36 error-43 and sometimes error-8058 !!! I tried formatting with no success, because my computer cant read the disk! It is a PNY professtional 32gb sd card. Im not sure if this problem is happening due to the fact that I previousley used this same SD on my PC, but im going to return this computer if it doesnt fix! Ive also tried doing to terminal commands but it doesn't work! Please help!!
- from a distressed youtuber

I'm having similar problems and I'm using a 1Tb HDD ( USB connection) which has 3 partitions. I have discovered that after some time (not clear what triggers it) I start being unable to use one partition for backups. When I checked further I discovered that I cannot write any file no matter what size to it. The problem has normally disappeared for a while when I restart my computer. I've done disk verifies and things are fine. The other two partitions are Ok ... I use one for TimeMachine and the other for SuperDuper. This partition is primarily used for ChronoSync backups so I suspect that the problem is related to how ChronoSync backs up but I have yet to convince their tech support of that.

Problem with running a DTS package from CF Code

i am using a CFQUERY Tag with EXEC dbo.storedprocname to
execute a stored procedure on our sql server which runs a DTS
package. the cf template allows them to upload a text file to the
server for import to a sql table via this DTS package. the problem
is that if the DTS package fails - it does nto notify the user
runnign the CF template. is there any way to notify the user when
the DTS package fails?

well the size of the data file being import varies widely.
the import is to be run daily but some days it might contain 10
records and some days it might contain 10,000. the dts package
itself generally takes a few seconds to process and the CF template
takes around 5-10 seconds to complete.
so if i were to add a dts task to the end of my work flow to
update a table with a status message, that might work, but how
would i capture the status of the dts import task?
as for the asynchronous gateway, i don't think that would
work for me, the user would want more immediate feedback, they
would not wait for an email confirmation (the target users have
trouble figuring out how to use email as it is - they are not the
most computer savvy). so likely if i could get the dts package to
write a status message to a table, then i would just add a cfquery
to my cf template after the one that runs the dts package, and
check for the status message and output it to the screen.
but the key is how do i add a dts task to grab the status of
the dts import task and drop it in a table.

Error Running Doc-Level JavaScript from VBS

I have the document level javascript function in my PDF document "FillForm()", (see code below). When I run my VBS code, (see code below) I get the error: "Run-time Error '438': Object doesn't support this property or method." on the "jso.FillForm" line. I can execute 'jso.console.Show' without a problem. What am I doing wrong? (Oh, and it has to be a document level funtion, and not a folder level function. And once I get this working, I'll be passing parameters. I'm using a stripped down function just to get this to work).
DOCUMENT JAVASCRIPT
//<Document-Level>
//<ACRO_source>FillForm</ACRO_source>
//<ACRO_script>
/*********** belongs to: Document-Level:FillForm ***********/
function FillForm()
var textHolder;
textHolder = this.getField("dorReturnAddress");
textHolder.value = "dorReturnAddress";
textHolder = this.getField("attn");
textHolder.value = "attn";
//</ACRO_script>
//</Document-Level>
VBS CODE
Dim wAcro As Acrobat.AcroApp
Dim dAcro As Acrobat.AcroPDDoc
Dim jso As Object
Set wAcro = CreateObject("AcroExch.App")
wAcro.Show
Set dAcro = CreateObject("AcroExch.PDDoc")
dAcro.Open (ThisDocument.Path & "\" & "Worksheet - Template.pdf")
Set jso = dAcro.GetJSObject
jso.FillForm
- Thanks in Advance!

You can use the function ExecuteThisJavascript. Read more here:
http://www.acrobatusers.com/forums/aucbb/viewtopic.php?id=16431

Error while running the SSIS package from SQL DB to excel file - export option

hi all,
I have 4.6 million records in my sql db and i want to copy this into a excel file. for this i went to the db and rt click and export to command and started the ssis package running. but after
few minutes, it throws me an error that "error in transferring data into excel file."
Can anyone help me why this happened and the resolution ?
help is appreciated!
Copying to `excel1_Wbook` (Error)
Messages
Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x8007000E.
(SQL Server Import and Export Wizard)
Error 0xc0047022: Data Flow Task 1: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Destination - excel1_Wbook" (217) failed with error code 0xC0202009 while processing input "Destination Input" (228).
The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information
about the failure.
(SQL Server Import and Export Wizard)
Error 0xc02020c4: Data Flow Task 1: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
(SQL Server Import and Export Wizard)
Error 0xc0047038: Data Flow Task 1: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on Source - excel1_Wbook returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The
meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)

You need to split your data and create (at least 5) worksheet targets.
For example if you have a ROW_NUMBER column you can use for instance a
Conditional Split for something like:
ROW_NUMBER % 5 == 0 for Case 1 (excel 1)
ROW_NUMBER % 5 == 1 for Case 2 (excel 2)
ROW_NUMBER % 5 == 2 for Case 3 (excel 3)
ROW_NUMBER % 5 == 3 for Case 4 (excel 4)
ROW_NUMBER % 5 == 4 for Case 5 (excel 5)

Error running a Copy Package from BPF (BPC7.5)

Similar Messages

Maybe you are looking for