Error – SAML Single Logout request does not correspond to the logged-in session participant

We are relatively new to ADFS, having set up working rp-trusts with three partners in the last few months. Our 4th partner is proving problematic. Single sign in works, but the ADFS
responds the single logout request from the RP with a status of Requester. The ADFS event log shows
The SAML Single Logout request does not correspond to the logged-in session participant.
Requestor: https://test-sso.rp.com/fed/sp
Request name identifier: Format: urn:oasis:names:tc:SAML:2.0:nameid-format:persistent, NameQualifier: http://fs.idp.com/adfs/services/trust SPNameQualifier:
https://test-sso.rp.com/fed/sp, SPProvidedId:
Logged-in session participants:
Count: 1, [Issuer: https://test-sso.crmondemand.com/fed/sp, NameID: (Format: , NameQualifier:
SPNameQualifier: , SPProvidedId: )]
This request failed.
User Action
Verify that the claim provider trust or the relying party trust configuration is up to date. If the name identifier in the request is different from the name identifier
in the session only by NameQualifier or SPNameQualifier, check and correct the name identifier policy issuance rule using the AD FS 2.0 Management snap-in.
The LogoutRequest looks like this
<samlp:LogoutRequest xmlns:samlp="urn:oasis:names:tc:SAML:2.0:protocol"
Destination="https://fs.timken.com/adfs/ls/"
                ID="id-HAScmHCfwfuYk76bce6YBfO2uOM-"
IssueInstant="2013-01-14T13:24:04Z"
Version="2.0">
. . . cert, etc. omitted . . .
<saml:NameID xmlns:saml="urn:oasis:names:tc:SAML:2.0:assertion"
Format="urn:oasis:names:tc:SAML:2.0:nameid-format:persistent"
NameQualifier="http://fs.idp.com/adfs/services/trust"
SPNameQualifier="https://test-sso.rp.com/fed/sp"
>jsmith</saml:NameID>
<samlp:SessionIndex>_df13d31b-162e-42e1-8331-f36be6bf1194</samlp:SessionIndex>
</samlp:LogoutRequest>
The session index and the username in NameID matches the Response we got from our AuthRequest. I don't know how to figure out what ADFS thinks does not match.
Any suggestions would be appreciated.
For completeness sake, the Response to AuthRequest looked like this.
<Subject>
            <NameID>jsmith</NameID>
            <SubjectConfirmation Method="urn:oasis:names:tc:SAML:2.0:cm:bearer">
                <SubjectConfirmationData NotOnOrAfter="2013-01-14T13:28:52.199Z"
                                         Recipient="https://test-sso.rp.com/fed/sp/authnResponse20"
                                         />
            </SubjectConfirmation>
        </Subject>
        <Conditions NotBefore="2013-01-14T13:23:52.183Z"
                    NotOnOrAfter="2013-01-14T14:23:52.183Z"
                    >
            <AudienceRestriction>
                <Audience>https://test-sso.rp.com/fed/sp</Audience>
            </AudienceRestriction>
        </Conditions>
        <AuthnStatement AuthnInstant="2013-01-14T13:10:43.826Z"
                        SessionIndex="_df13d31b-162e-42e1-8331-f36be6bf1194"
>

Okay, here are the relevant SAML messages.
The <AuthnRequest>
<samlp:AuthnRequest ID="_ced78e65-14d2-4c4d-8417-51f664a9e2e3"
                    Version="2.0"
                    IssueInstant="2013-02-04T13:29:20.887Z"
                    Destination="https://fs.timken.com/adfs/ls/"
                    Consent="urn:oasis:names:tc:SAML:2.0:consent:unspecified"
                    xmlns:samlp="urn:oasis:names:tc:SAML:2.0:protocol"
                    >
    <Issuer xmlns="urn:oasis:names:tc:SAML:2.0:assertion">http://fs.timken.com/adfs/services/trust</Issuer>
    <Conditions xmlns="urn:oasis:names:tc:SAML:2.0:assertion">
        <AudienceRestriction>
            <Audience>https://test-sso.salesdemand.com/fed/sp</Audience>
        </AudienceRestriction>
    </Conditions>
</samlp:AuthnRequest>The AuthnRequest Response<samlp:Response ID="_890f3128-6cae-414e-8272-30cde3bda94a"               Version="2.0"                IssueInstant="2013-02-04T13:29:29.748Z"                Destination="https://test-sso.salesdemand.com/fed/sp/authnResponse20"                Consent="urn:oasis:names:tc:SAML:2.0:consent:unspecified"                xmlns:samlp="urn:oasis:names:tc:SAML:2.0:protocol"                >    <Issuer xmlns="urn:oasis:names:tc:SAML:2.0:assertion">http://fs.timken.com/adfs/services/trust</Issuer>    <samlp:Status>        <samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:Success" />    </samlp:Status>    <Assertion ID="_82f82c5c-2653-4e18-9308-349ebeb67743"               IssueInstant="2013-02-04T13:29:29.748Z"               Version="2.0"               xmlns="urn:oasis:names:tc:SAML:2.0:assertion"               >        <Issuer>http://fs.timken.com/adfs/services/trust</Issuer>        <ds:Signature xmlns:ds="http://www.w3.org/2000/09/xmldsig#">            <ds:SignedInfo>                <ds:CanonicalizationMethod Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#" />                <ds:SignatureMethod Algorithm="http://www.w3.org/2000/09/xmldsig#rsa-sha1" />                <ds:Reference URI="#_82f82c5c-2653-4e18-9308-349ebeb67743">                    <ds:Transforms>                        <ds:Transform Algorithm="http://www.w3.org/2000/09/xmldsig#enveloped-signature" />                        <ds:Transform Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#" />                    </ds:Transforms>                    <ds:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1" />                    <ds:DigestValue>RxZZLlbdh5eD6Ht4+aVna3Rtbnc=</ds:DigestValue>                </ds:Reference>            </ds:SignedInfo>            <ds:SignatureValue>Es8LAN9noqGIJEbgZe/...XW8LAv5Mgr3tOXpHRlcsJNss/A==</ds:SignatureValue>            <KeyInfo xmlns="http://www.w3.org/2000/09/xmldsig#">                <ds:X509Data>                    <ds:X509Certificate>MIIFDDCCA/SgAwIB...</ds:X509Certificate>                </ds:X509Data>           </KeyInfo>        </ds:Signature>        <Subject>            <NameID>mooreta</NameID>            <SubjectConfirmation Method="urn:oasis:names:tc:SAML:2.0:cm:bearer">                <SubjectConfirmationData NotOnOrAfter="2013-02-04T13:34:29.748Z"                                         Recipient="https://test-sso.salesdemand.com/fed/sp/authnResponse20"                                         />            </SubjectConfirmation>        </Subject>        <Conditions NotBefore="2013-02-04T13:29:29.732Z"                    NotOnOrAfter="2013-02-04T14:29:29.732Z"                    >            <AudienceRestriction>                <Audience>https://test-sso.salesdemand.com/fed/sp</Audience>            </AudienceRestriction>        </Conditions>       <AuthnStatement AuthnInstant="2013-02-04T13:29:29.545Z"                        SessionIndex="_82f82c5c-2653-4e18-9308-349ebeb67743"                        >            <AuthnContext>                <AuthnContextClassRef>urn:federation:authentication:windows</AuthnContextClassRef>            </AuthnContext>        </AuthnStatement>    </Assertion></samlp:Response>The LogoutRequest<samlp:LogoutRequest xmlns:samlp="urn:oasis:names:tc:SAML:2.0:protocol"                     Destination="https://fs.timken.com/adfs/ls/"                     ID="id-uvoTioVCLdMycE88o-6CU5RrSNM-"                     IssueInstant="2013-02-04T13:29:57Z"                     Version="2.0"                     >    <saml:Issuer xmlns:saml="urn:oasis:names:tc:SAML:2.0:assertion"                 Format="urn:oasis:names:tc:SAML:2.0:nameid-format:entity"                 >https://test-sso.salesdemand.com/fed/sp</saml:Issuer>    <dsig:Signature xmlns:dsig="http://www.w3.org/2000/09/xmldsig#">        <dsig:SignedInfo>            <dsig:CanonicalizationMethod Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#" />            <dsig:SignatureMethod Algorithm="http://www.w3.org/2000/09/xmldsig#rsa-sha1" />            <dsig:Reference URI="#id-uvoTioVCLdMycE88o-6CU5RrSNM-">                <dsig:Transforms>                    <dsig:Transform Algorithm="http://www.w3.org/2000/09/xmldsig#enveloped-signature" />                    <dsig:Transform Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#" />                </dsig:Transforms>                <dsig:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1" />                <dsig:DigestValue>ZT0yQqiaL2dD2a7rt6ywJ9EoM1I=</dsig:DigestValue>            </dsig:Reference>        </dsig:SignedInfo>        <dsig:SignatureValue>Z7F7zYS31y1K48FbUHevJT86+txOlPM9awlHiMNj1TiMxRAEVz1rOj2uG0oVMd7NkblkneCrE8aVtJuebdUY4Q0DAcXR8lSTuNEFocT2R6eCIwQb48xQqQMs8ZE6siPsPFMS+QAhpgDom/IY61L/.../NNxVg==</dsig:SignatureValue>        <dsig:KeyInfo>            <dsig:X509Data>                <dsig:X509Certificate>MIIFxTCCBK2gAwIBAgIQAN+.../G6p95pNm1ZAqroUjufLeHO4q34Mx3xNyw0tmyjmWgkxY11Pa+M0gCeLOdLzxafIOXUFXOhKfOUg4Jp4S+/sCVcd9fBDPvfEHSr8uMmQC2IdQaRE7IvZdRF0OUP+l1MpRBkMsy98hPXTBK6n1ivklOxzmWie88jav8gzjWhwQC5Ia2/JNYxVBkPsNkRw86n8KBnlsumU9EV0dAeXTOaehKtG+RNnD1Gt4Y34TQccaIbf7OTLisY4kMkjZbRu3sJnX9KjM=</dsig:X509Certificate>            </dsig:X509Data>        </dsig:KeyInfo>    </dsig:Signature>    <saml:NameID xmlns:saml="urn:oasis:names:tc:SAML:2.0:assertion"                 Format="urn:oasis:names:tc:SAML:2.0:nameid-format:persistent"                 NameQualifier="http://fs.timken.com/adfs/services/trust"                 SPNameQualifier="https://test-sso.salesdemand.com/fed/sp"                 >mooreta</saml:NameID>    <samlp:SessionIndex>_82f82c5c-2653-4e18-9308-349ebeb67743</samlp:SessionIndex></samlp:LogoutRequest>The LogoutRequest Response<samlp:LogoutResponse ID="_bf7199a8-3248-4201-9ca4-609bec5404d6"                      Version="2.0"                      IssueInstant="2013-02-04T13:29:59.076Z"                      Destination="https://test-sso.salesdemand.com/fed/sp/samlv20"                      Consent="urn:oasis:names:tc:SAML:2.0:consent:unspecified"                      InResponseTo="id-uvoTioVCLdMycE88o-6CU5RrSNM-"                      xmlns:samlp="urn:oasis:names:tc:SAML:2.0:protocol"                      >    <Issuer xmlns="urn:oasis:names:tc:SAML:2.0:assertion">http://fs.timken.com/adfs/services/trust</Issuer>    <samlp:Status>        <samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:Requester" />    </samlp:Status></samlp:LogoutResponse>The ADFS Error Log EntryThe SAML Single Logout request does not correspond to the logged-in session participant. Requestor: https://test-sso.salesdemand.com/fed/sp Request name identifier: Format: urn:oasis:names:tc:SAML:2.0:nameid-format:persistent, NameQualifier: http://fs.timken.com/adfs/services/trust SPNameQualifier: https://test-sso.salesdemand.com/fed/sp, SPProvidedId: Logged-in session participants: Count: 1, [Issuer: https://test-sso.salesdemand.com/fed/sp, NameID: (Format: , NameQualifier: SPNameQualifier: , SPProvidedId: )] This request failed. User Action Verify that the claim provider trust or the relying party trust configuration is up to date. If the name identifier in the request is different from the name identifier in the session only by NameQualifier or SPNameQualifier, check and correct the name identifier policy issuance rule using the AD FS 2.0 Management snap-in.

Similar Messages

Object in import-file header does not correspond to the migration object

Hi Forum,
I have loaded Business partner successfully with the file created in Workbench with test data.
Now I want to load the data from Application server. But i am getting the error
"Object in import-file header does not correspond to the migration object".
I have read that the import file should have 3 types of record
1. Header record corrs to the structure TEMINFO
2. Actual data records
3. Final record for individual object.
I am not sure where I am making a mistake
my files header looks like
<004F><Space><&INFO><Company><Migration Object><User><Date><Time>
Please help.
Thanks in advance

I am assuming you are in transaction EMIGIMP loading a converted migration file for import, correct?
If so, you should be able to read the company, mig. object, user name, etc. in the import file tab overview. If conversion did not work correctly, this info will not display here.
It is possible you are missing some data in the header, or spacing is not correct. Are you converting the input file with program REMIG_FILE_TRANSFORM or are you trying to create the migration file yourself?

Connect-SPOService : The Application ID (AppID) for which the service ticket is requested does not exist on the system.

I am trying to connect to SharePoint in my Office 365 environment by following https://support.office.com/article/Set-up-the-SharePoint-Online-Management-Shell-environment-7b931221-63e2-45cc-9ebc-30e042f17e2c and I am getting:
Connect-SPOService : The Application ID (AppID) for which the service ticket is requested does not exist on the system.
Is there some setting I need to change on the O365 side? Thanks.

Hi,
Based on your description, my understanding is that you want connect SharePoint Online using PowerShell.
Please make sure that the following software is installed.
Windows Management Framework 3.0
SharePoint Online Management Shell
And then, open the SharePoint Online Management Shell and use the Script below to test
whether it works.
$User = "[username]@[tenant].onmicrosoft.com"
$Pass = "[password]"
$creds = New-Object System.Management.Automation.PSCredential($User,(ConvertTo-SecureString $Pass -AsPlainText -Force));
Connect-SPOService -Url https://[tenant]-admin.sharepoint.com -Credential $creds
Get-SPOSite
More information:
http://blog.falchionconsulting.com/index.php/2013/01/using-powershell-to-manage-sharepoint-2013-online/
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support

Error: Imported bank file format does not correspond to selected format

Hi All,
I am trying to execute FF.5 transaction - Import Electronic Bank Statement - for brazilian bank (Banco do Brasil) but I got an error message no. 8B795 (Imported bank file format does not correspond to selected format), I tried format B (Cobrança/pagar itau) and 1 (Cobrança/pagar bradesco).
The file that I am trying to upload has 400 positions.
Does anyone know which format I should to use?
Regards,
Daniel

Hello,
In my case our bank was sending us a file using the version 085, while we were waiting for one of those: 030, 040, 050, 084 or 087.
Now they will send these files using the version 087.
Thank you!
Caio.

Server Error in '/' Application. Value does not fall within the expected range

Hi,
I am getting this error when i am publishing my custom webpart in the UAT site, it is created in Visual studio 2008 and i have deployed it in MOSS 2007 site.
I appreciate any help on this. Please see the below error.
Source Error:
Line 20: protected void getDivision(SPWeb web, string strList)
Line 21: {
Line 22: SPList list = web.Lists[strList];
Line 23: ddlDivision.DataSource = list.Items;
Line 24: ddlDivision.DataValueField = "Title"; // List field holding value - first column is called Title anyway!
Thanks,
Prachi

Hi,
I am receiving this error when i am publishing the web-part page. Web part was developed in visual studio 2008 and deployed in SharePoint 2007 site.
While deployment i am getting any error, this error is occurring only when i am publishing the web-part page.
I checked all the help links and made changes in the web.config file, restarted IIS, add n deleted web-part from the web-part Gallery, added n removed wsp files 2-3 times, everything i did.
If anyone can help me resolving this issue then please send across solution.
Thanks,
Prachi

How can I fixed an app that says An Error Has Occurred and it does not reinstall because the download was damaged?

I don't know why but I can't download Borderlands GOTY. I tried and it says this product is damaged please reinstall borderlands GOTY. I tried once again and it said the same thing. Then I tried a third time and now it won't install. It just says reinstall app in the Purchases list.

Restore it with a TimeMachine backup if you have used it previously.
If not delete all references to it, empty the trash, clear browser history, try a different browser.
Maybe try a faster internet connection to successfully download.

BDCDATA error-Field INVFO-ZUONR does not exist in the screen SAPLMR1M 6000

Hi
I am trying to call transaction MIR7 from ABAP code and passing values to the same.
I am able to pass data to first tab using code (as recorded in SHDB) :
    DATA BEGIN OF BDCDATA OCCURS 1.
    INCLUDE STRUCTURE BDCDATA.
    DATA END OF BDCDATA.
    CLEAR BDCDATA.
    BDCDATA-PROGRAM = 'SAPLACHD'.
    BDCDATA-DYNPRO   = '1000'.
    BDCDATA-DYNBEGIN = 'X'.
    APPEND BDCDATA.
    CLEAR BDCDATA.
    BDCDATA-FNAM     = 'BKPF-BUKRS'.
    BDCDATA-FVAL     = CompCode.
    APPEND BDCDATA.
    CLEAR BDCDATA.
    BDCDATA-PROGRAM = 'SAPLMR1M'.
    BDCDATA-DYNPRO   = '6000'.
    BDCDATA-DYNBEGIN = 'X'.
    APPEND BDCDATA.
    CLEAR BDCDATA.
    BDCDATA-FNAM     = 'INVFO-BLDAT'.
    BDCDATA-FVAL     = InvoiceDate.
    APPEND BDCDATA.
    CLEAR BDCDATA.
    BDCDATA-FNAM     = 'INVFO-WRBTR'.
    BDCDATA-FVAL     = InvoiceAmount.
    APPEND BDCDATA.
    Call Transaction 'MIR7' USING BDCDATA MODE 'A'.
But when I add fields
    CLEAR BDCDATA.
    BDCDATA-FNAM     = 'INVFO-ZUONR'.
    BDCDATA-FVAL     = 'HELLO !!!!!'.
    APPEND BDCDATA.
    CLEAR BDCDATA.
    BDCDATA-FNAM     = 'INVFO-BKTXT'.
    BDCDATA-FVAL     = 'MY DATA .........'.
    APPEND BDCDATA.
I get an error message :
Field INVFO-ZUONR does not exist in the screen SAPLMR1M 6000
But when I add
    CLEAR BDCDATA.
    BDCDATA-PROGRAM = 'SAPLFDCB'.
    BDCDATA-DYNPRO   = '0150'.
    BDCDATA-DYNBEGIN = 'X'.
    APPEND BDCDATA.
before setting INVFO-ZUONR, the error disappears, still I don't get values in HeaderText and Assignment fields on GUI
Can anybody help.
Thanks a lot
Ruhi Hira

I had used the exact recording as in SHDB but no success.
Is it OK to create a parameter map this screen field to the parameter.
Where I can set the parameter outside the screen..
Ruhi Hira

API error: Element link does not exist for the duration of the entry

I am trying to create an element using the API_PAY_ELEMENT_ENTRY.CREATE_ELEMENT_ENTRY API
While I am able to create many elements for years this way, for one particular non-recurring element I get the following error
ORA-20001: Element link does not exist for the duration of the entry
Cause: The link has been purged or date effectively deleted.
Action: Check the effective start and end dates on the link definitions for this element.
I have checked evertything and the Link is defined far before my element entry starts and with no end date. The assignment I want to attach this element entry is perfectly eligible.
The weirdest is that I am able to create this element entry with the values I want and the dates I want through standard User interface...
Any idea?
Message was edited by:
briard

Here are the parameters I use in my call.
DECLARE
L_EFFECTIVE_START_DATE DATE;
L_EFFECTIVE_END_DATE DATE;
L_ELEMENT_ENTRY_ID NUMBER;
L_OBJECT_VERSION_NUMBER NUMBER;
L_WARNING BOOLEAN;
BEGIN
APPS.PAY_ELEMENT_ENTRY_API.CREATE_ELEMENT_ENTRY(
P_EFFECTIVE_DATE => TO_DATE('01-JUL-2008','DD-MON-YYYY'),
P_BUSINESS_GROUP_ID => 1,
P_ASSIGNMENT_ID => 122147
P_ELEMENT_LINK_ID => 233,
P_ENTRY_TYPE => 'E',
P_INPUT_VALUE_ID1 => 313,
P_ENTRY_VALUE1 => 'T',
P_INPUT_VALUE_ID2 => 314,
P_ENTRY_VALUE2 => '5',
-- out params
P_EFFECTIVE_START_DATE => L_EFFECTIVE_START_DATE,
P_EFFECTIVE_END_DATE => L_EFFECTIVE_END_DATE,
P_ELEMENT_ENTRY_ID => L_ELEMENT_ENTRY_ID,
P_OBJECT_VERSION_NUMBER => L_OBJECT_VERSION_NUMBER,
P_CREATE_WARNING => L_WARNING);
END;
François

Trip type does not exist in the system (T702G)

Hi,
In HR - Module - Travel Management.
I am trying to create a travel request for an employee.
i am getting the error message :
Statutory trip type does not exist in the system (T702G)
how to assign the trip type to a particular employee.
regards
sam

If you are applying as employee you need to configure trip schema and single field control for webdynpro provided you are using webdynpro application as employee.
there in the tri provision variant you need to enter the variant you have created.
Under that select the travel planning trip schema PL.
on right hand side you have a field trip schema: statutory where you need to select appropriate schema from drop-down.

Tax code V1 does not exist in the system (T007A)

Hi all,
Need some expert help here. I'm testing this travel management solution provided by SAP. I have configured all so that the functionalities are apparent in the ESS Business package. Unfortunately, when i tried to create a 'travel request' via SAP Portal, i'm getting the error message "Tax code V1 does not exist in the system (T007A)". The error message appears once on review page.
Since this is a Sandpit environment, i believe taht there might be numerous missing config. Can anyone point me to the right direction? Thanks
Regards

Hi All,
Thanks for the quic reply. That solved the problem for travel request. I maintained tax type V1 and N1 and all is good. However, i got another new error now when i try to create my travel expense. After filling up all the necessary info (tested for accomodation booking), i got the following error:
"Entry not found in table T706V. Argument: 14P EUR L 0191520080909"
I went to that table but couldn't make sense out of it. Any pointers please? Thanks
Regards

Field VIQMSM-MATXT(14) does not exist in the screen SAPLIQS0 7204

Hi experts,
I have a BDC calls QM02 Tcode in a custom report as follow:
PERFORM bdc_dynpro      USING 'SAPLIQS0' '7204'.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '=REAK'.
PERFORM bdc_field       USING 'BDC_CURSOR'
                                'VIQMEL-QMNUM'.
CLEAR txline.
CONCATENATE 'VIQMSM-MATXT(' lnindex ')' INTO txline.
" txline = VIQMSM-MATXT(0014)
CONCATENATE 'PO #: ' alv_qmel-ponum INTO matxt SEPARATED BY space.
PERFORM bdc_field       USING txline
                                  matxt.
PERFORM bdc_transaction USING 'QM02'.
When debugging I found that the input bdcdata table contains a field VIQMSM-MATXT(14) in screen SAPLIQS0 7204.
Number 14 is the number of task of the notification which was not marked as deleted.
This field caused the error: Field VIQMSM-MATXT(14) does not exist in the screen SAPLIQS0 7204 after that.
I would like to know what does VIQMSM-MATXT(14) mean? How BDC can transfer VIQMSM-MATXT(14) to QM02? And How does it work?
Thanks,
Khanh

Hi Kostek,
I did not have the solution for this exact problem because our FA canceled this bug.
Check your test case carefully whether the screen of the TCode called by BDC has that field OR NOT. If that screen does not have that field in your special case, just ignore it.
Regards,
Khanh

Extract structure does not exist at the time of transport

HI ,
i am facing an shortdump error while transporting customized copa data source from r/3 dev to r/3 qua. The error analysis is
Extract structure does not exist at the time of transport
Long text of error message:
Technical information about the message:
Message class....... "RD"
Number.............. 041
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
please provide the solution asap

Hi Bharath,
Goto SE11, put the name of your extract structure in Data type and click display, check the version of the structure. if it is inactive then goto RSA6 and activate your DS.
After activation try to retransport.
Regards,
Durgesh.
Edited by: Durgesh Gandewar on Jul 25, 2011 3:13 PM

Field BSEG-SKFBT does not exist in the screen SAPMF05A 0302

Hi
while posting parked documents using FBV0 i am getting following error.
Field BSEG-SKFBT does not exist in the screen SAPMF05A 0302
What can be the solution to above error.
regards
Rajesh

To eliminate this problem please use transactions OB14, OB41 and set for posting key and G/L account
field status for field BSEG-SKFBT 'Optional entry':
transaction OB14 AND OB41 -> Select group 'Payment transactions' -> 'Payment terms' -> set 'Optional'.
I think the SAP note 1073234 could correct this issue.
Thanks,
Daniel

Field COBL-FKBER. does not exist in the screen SAPLKACB 0002

HI ALL,
I am facing problem when execute a BATCH JOB (sm35) for depreciation run(AFAB). It is giving an error:
349
Field COBL-FKBER. does not exist in the screen SAPLKACB 0002.
In the batch job, I noticed that there are 13 transactions have been processed successfully. Only 1 failed with above error message.
Please advise how to solve this problem.
Thanks in advance.

Hi ,
Go to the field status tcode OBC4 for the GL accounts you are trying to post to and set GSBER as optional.
It should work, refer to COBL-GSBER does not exist in the screen SAPLKACB 0002
Regards,
Fernando

SharePoint Receive Location: Value does not fall within the expected range

Hi,
I setup a wss receive location in BizTalk 2013 (CU2 applied) to get documents from a SharePoint 2013 infoPath Form Library, the documents were checked out but not processed by WSS adapter and BizTalk logs following error in event log
The host instance user has 'Full Control' permission on this form library
(the same configuration is working in another environment with different BizTalk and SP instances)
any help would be highly appreciated
Usman Shaheen MCTS BizTalk Server http://usmanshaheen.wordpress.com

Hi,
I would recommend to create a new InfoPath form and publish it to SharePoint library to see
if the issue still occurs.
Here is a similar thread for you to take a look:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/07438b97-2b25-431a-b94a-1ea8e08992d5/upgrade-sharepoint-2007-to-sharepoint-2010-info-path-pages-issues?forum=sharepointadminprevious
If that doesnt fix the issue, you should go with this hotfix.
Description of the SharePoint Foundation 2010 hotfix package (Wss-x-none.msp): July 2, 2012
Description reads:
Assume that you use the metadata navigation and filter feature to filter a view of a document library. When you check in or check out a document through the menu on the ribbon, you receive the following error exception:
System.ArgumentException: Value does not fall within the expected range. at Microsoft.SharePoint.SPWeb.GetFile(String strUrl) at Microsoft.SharePoint.ApplicationPages.Checkin.get_File() at Microsoft.SharePoint.ApplicationPages.Checkin.OnPreInit(EventArgs
e) at System.Web.UI.Page.PerformPreInit() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Rachit

Error – SAML Single Logout request does not correspond to the logged-in session participant

Similar Messages

Maybe you are looking for