Error testing webservice using ESB with Oracle apps adapter services

When creating a simple ESB project with Oracle Applications adapter service, i get the following error when testing the webservice via EM.
SOA suite 10.1.3.3
oracle EBS 11.5.10
Any pointer on how to fix this is very much appreciated.
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"><env:Header/><env:Body><env:Fault xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"><faultcode>env:ESBMessageProcessingFailed</faultcode><detail><EventName>DefaultSystem.GetOrderRS.executeprocedure</EventName><Cause>An unhandled exception has been thrown in the ESB system. The exception reported is: "oracle.tip.esb.server.common.exceptions.BusinessEventRejectionException: An unhandled exception has been thrown in the ESB system. The exception reported is: "org.collaxa.thirdparty.apache.wsif.WSIFException: esb:///ESB_Projects/LoadCustomer_orappdorders/orappd11i.wsdl [ orappd11i_ptt::orappd11i(InputParameters,OutputParameters) ] - WSIF JCA Execute of operation 'orappd11i' failed due to: Could not instantiate InteractionSpec oracle.tip.adapter.apps.AppsStoredProcedureInteractionSpec due to: Error while setting JCA WSDL Property.
Property setIRepInternalName is not defined for oracle.tip.adapter.apps.AppsStoredProcedureInteractionSpec
Please verify the spelling of the property.
; nested exception is:
     ORABPEL-12532
Error while setting JCA WSDL Property.
Property setIRepInternalName is not defined for oracle.tip.adapter.apps.AppsStoredProcedureInteractionSpec
Please verify the spelling of the property.
; nested exception is:
     org.collaxa.thirdparty.apache.wsif.WSIFException: Could not instantiate InteractionSpec oracle.tip.adapter.apps.AppsStoredProcedureInteractionSpec due to: Error while setting JCA WSDL Property.
Property setIRepInternalName is not defined for oracle.tip.adapter.apps.AppsStoredProcedureInteractionSpec
Please verify the spelling of the property.
; nested exception is:
     ORABPEL-12532
Error while setting JCA WSDL Property.
Property setIRepInternalName is not defined for oracle.tip.adapter.apps.AppsStoredProcedureInteractionSpec

Fix is as pointed in Error reported during AP Invoice concurrent program.

Similar Messages

Error while running BPEL Process with Oracle Apps Adapter.

Hi All,
I am trying to configure the oracle apps adapter in JDeveloper.
Here my EBS is running on different database where as SOA is installed on different database.
I am able to properly configure the adapter & deploy the process to weblogic server.
But when I am trying to run the process I am getting following errorr.
<p>
The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510\nJCA Resource Adapter location error.\nUnable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/>\nThe JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='*<JNDI Name passed in Oracle apps Adapter.>*'.\nThe reason for this is most likely that either \n 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or \n 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to <JNDI Name passed in Oracle apps Adapter.>
</p>
Please suggest the solution for the same.
its really urgent . waiting for reply.
Edited by: aumathe on Dec 16, 2010 2:33 PM

Have you created a connection pool with the JNDI specified while configuring adapter in Oracle Apps adapter on weblogic admin console. You should create it at Deployments --> OracleAppsAdapter --> Configuration--> Outbound Connection pools
Make sure to update the adapter after creating a connection pool so that changes can take effect.
Regards,
Anuj

Using Discoverer with Oracle Apps

Hi,
I have Oracle Apps vision instance on my laptop. I installed Discoverer Administrator and Desktop. But when I connect through Desktop, it only recognizes database users. When I check Application User check box still it did not recognize the Oracle Apps user 'SYSADMIN', the error message is 'Invalid username/password' which is a valid user and I could login to Oracle Apps using it and it has many responsibilities.
Is there a step I am missing to synchronize Apps users with database or Discoverer Administrator/Desktop so that I can login to Desktop using Apps user to create workbooks.
Thanks,
Suresh

Hi Rod,
Thanks for the reply. At the time of creation of EUL it gives two options
1. Grant Access to Public
2. New EUL is for use by Oracle Applications users only
When I selected the second one I am not able to access it by any user from desktop tool but when I used the first option I can only login from Desktop using database users only not Appliations users, it gives error message 'Invalid username/password'. I dont see anywhere else I need to do something while creating EUL.
Please give me the insight into this.
Thanks,
Suresh

Schema Error with Oracle Apps Adapter

Hi folks,
I'm trying to create a simple BPEL process to call the CREATE_LOCATION API in eBus 11.5.10.2 on a 10g Oracle Database. I'm using jdeveloper 10.1.3.4.
I create the partner link with success, creating the wrapper package due to the record types. I create an invoke and create the variables based on the partner link.
The problem appears when I try to assign data to the Invoke variables, I expand the Invoke Input variable but I only get as far as the payload. If I try a Transform activity I get the message 'Unable to get schema information for target'.
If I open the xsd file it appears to be fine (I'm no expert).
Am I missing a step?
Cheers,
Jason

Kaldiss,
Thanks for your reply.
The XSD file is in the schemas section of the project, it's the one that gets generated when I created the apps adapter.
I've tried remapping the variable to the message type but get the same problem, when I expand it out it I get:
(x) Invoke_OA_C_ERP_L_InputVariable
InputParameters
It won't go any further.
If I open the generated xsd in jdeveloper it looks correct, I see the input and output elements with their sub-compunents along with the record type definitions.
Any more thoughts?
Cheers,
Jason

Using XDB with Oracle Apps

Oracle Apps 11.5.9 installs a 9.2 database without XDB. XDB can be installed in these databases by running catqm.sql and catxdbj.sql. The questions is, if I only have a license to run Oracle Apps am I also licensed to install XDB into that Apps database?

OK, I know this is a cop-out but Oracle Licencing is a very complex area that I try my best not to understand...... :)
The only way to get a definitive answer to this question is to discuss it with the Oracle Account Manager who is responsible for Oracle's relationship with your organization.

Not able to integrate SOA Suite with EBS using Oracle APPS Adapter

Hi,
We need to listen to outbound business events of Oracle EBS using BES via Oracle APPS Adapter.
We have created a composite containing Oracle Application Adapter and BPEL Process.
In Apps adapter when configured Outbound Business events "oracle.apps.bom.component.modified" using Dequeue Operation,a corresponding subscriber is created in WF_BPEL_Q for respective event selected.
In Oracle EBS
for "oracle.apps.bom.component.modified" status is enabled and in subscription WF_BPEL_QAGENT is there.
When we are changing any BOM component in Oracle EBS Designer and saving it, a record is being created in "WF_BPEL_QTAB".
BPEL Process( Oracle Apps Adapter Partner Link---> Recieve Actvity ) instances are not being created when any BOM component is being changed.
Oracle Apps Adapter is not able to dequeue the data from WF_BPEL_QTAB.
There is not any error/exception in oracle soa suite server logs for Oracle APPS adapter.
SOA Diagnostics Logs are :
[2012-07-04T08:55:51.304+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.bpel.engine] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] CubeServiceEngine=> initing default/Testr!4.0*soa_f1fe3bbc-1269-437c-a75f-1239da743fea/BPELProcess1
[2012-07-04T08:55:51.304+05:30] [AdminServer] [NOTIFICATION] [] [oracle.integration.platform.blocks.deploy] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] Publishing deploy event for default/Testr!4.0*soa_f1fe3bbc-1269-437c-a75f-1239da743fea
[2012-07-04T08:55:51.382+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] JCABinding=> [Testr.bom_cm/4.0] :load Loading bom_cm_apps.jca ..
[2012-07-04T08:55:51.390+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] JCABinding=> bom_cm Performing JCAEndpointActivation::prepareActivation for {AppsEventSchema=ANY_SCHEMA, MessageSelectorRule=tab.user_data.event_name = 'oracle.apps.bom.component.modified', Consumer=ORA_8cpkad9l88sj0c9n8kq42ghm85, QueueName=WF_BPEL_Q, DatabaseSchema=APPS}
[2012-07-04T08:55:51.391+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] JCABinding=> bom_cm JCAEndpointActivation::prepareActivation - Locating JCA Binding Component instance: SCA_AS11R1
[2012-07-04T08:55:51.397+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] JCABinding=> JCABinding=> Instantiating inbound part of JCA Binding Component instance: SCA_AS11R1
[2012-07-04T08:55:51.397+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] JCABinding=> bom_cm JCAEndpointActivation::initiateInboundJcaEndpoint - Creating and initializing inbound JCA endpoint for:[[
endpoint='bom_cm'
WSDL location='oramds:/deployed-composites/default/Testr_rev4.0/bom_cm.wsdl'
portType='DEQUEUE_ptt'
operation='DEQUEUE'
*activation properties={AppsEventSchema=ANY_SCHEMA, MessageSelectorRule=tab.user_data.event_name = 'oracle.apps.bom.component.modified', Consumer=ORA_8cpkad9l88sj0c9n8kq42ghm85, QueueName=WF_BPEL_Q, DatabaseSchema=APPS}*
[2012-07-04T08:55:51.398+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] JCABinding=> bom_cm JCAEndpointActivation::initiateInboundJcaEndpoint - Creating endpoint (0) for bom_cm
[2012-07-04T08:55:51.407+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] JCABinding=> bom_cm JCAEndpointActivation::prepareActivation - Done preparing JCAEndpointActivation for Service 'bom_cm'
[2012-07-04T08:55:51.409+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] JCABinding=> [Testr.bom_cm/4.0] :load Successfully loaded bom_cm_apps.jca
[2012-07-04T08:55:51.410+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] JCABinding=> [Testr.bom_cm/4.0] :init Initializing bom_cm_apps.jca
[2012-07-04T08:55:51.410+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] JCABinding=> bom_cm JCAEndpointActivation::performActivation - Performing JCA Endpoint Activation, Endpoint Id='bom_cm'
[2012-07-04T08:55:51.410+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] JCABinding=> bom_cm Performing endpoint activation (1) for bom_cm
[2012-07-04T08:55:51.411+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] JCABinding=> Testr JCA Binding Component instance: SCA_AS11R1 - endpointActivation for portType=DEQUEUE_ptt, operation=DEQUEUE
[2012-07-04T08:55:51.416+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] JCABinding=> Testr Creating new instance of Resource Adapter oracle.tip.adapter.apps.AppsResourceAdapter
[2012-07-04T08:55:51.417+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] JCABinding=> Testr JCA Binding Component instance: SCA_AS11R1 - starting Resource Adapter oracle.tip.adapter.apps.AppsResourceAdapter
[2012-07-04T08:55:51.471+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] Oracle Applications Adapter Starting...AQResourceAdapter
[2012-07-04T08:55:51.474+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] Oracle Applications Adapter Creating Endpoint...
*[2012-07-04T08:55:51.482+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] Oracle Applications Adapter Activating Endpoint...*
*[2012-07-04T08:55:53.782+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] JCABinding=> Testr JCA Binding Component instance: SCA_AS11R1 - successfully completed endpointActivation for portType=DEQUEUE_ptt, operation=DEQUEUE*
*[2012-07-04T08:55:53.783+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] JCABinding=> [Testr.bom_cm/4.0] :init Successfully initialized bom_cm_apps.jca*
*[2012-07-04T08:55:53.783+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@c8ccf1] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,1:30342] [APP: soa-infra] Dequeue Agent activated....*
Regards,
Abhinav Gupta
Edited by: Abhinav on Jul 5, 2012 9:56 AM

We would like to capture a few business events in oracle BOM and PO that are of interest to us. In order to do this,
we deploy oracle SOA composite with BEPL in the Oracle Fusion Middleware Control. The oracle SOA composite is configured for a particular outbound business event. It should listens on a specific queue WF_BPEL_Q or WF_BPEL_QTAB and de-queues the messages from that Oracle Queue or Oracle AQ Table. In jDeveloper 11g we created a SOA project with oracle applications adapter partner link and a receive.
Specifically we are trying to capture the business outbound event oracle.apps.bom.component.modified just to get the event data in this receive.
Partner link configuration: We added the database connection to the oracle EBS instance. Tested it and we
succeded. Chose ANY_SCHEMA in partner link configuration.
We ensured that the JNDI Name here( eis/Apps/Apps ) match the JNDI name provided in the weblogic-->Deployments--
OracleAppsAdapter -->Configuration --> Outbound Connection Pools. For this outbound resource pool, Connection factory interface was javax.resource.cci.ConnectionFactory. Property name xADataSourceName was mapped to JNDI name of the configured JDBC datasource in the weblogic. When we created the connection pool. We tested and it worked fine. This data source had the connection pool configured to the oracle applications schema with APPS user.
After adding the partner link with the above configuration, we added a receive. We deployed this configuration to the middleware. We went to the oracle EBS modified a BOM component and we expected to having running BPEL instances against the deloyed composite. However, the problem is we are not having any running instance for the composite.
We found that there are entries in the view AQ$WF_BPEL_QTAB with an ENQ_TIME and ENQ_TIMESTAMP but with no DEQ_TIME or DEQ_TIMESTAMP. The ENQ_TIMESTAMP corresponds to the time we modified BOM in oracle BOM forms/Designer
The data is being written in WF_BPEL_QTAB for the BOM changes but not being dequeued by oracle applications adapter/composites deployed in soa server.
Please help me it quite urgent.
Is there anything we are missing on EBS side to be activited. for the events to be dequeued
Any Help is appreciated.
Abhinav

Error when trying to use LogMiner with Oracle 8.1.6.0.0

Hi everybody,
I'm trying to use LogMiner with Oracle 8.1.6.0.0. When I execute the following code with SQL*Plus, I have an error.
BEGIN
DBMS_LOGMNR.START_LOGMNR
(options =>
dbms_logmnr.dict_from_online_catalog);
END;
The error displayed by SQL*Plus is:
PLS-00302: 'DICT_FROM_ONLINE_CATALOG' must be declared.
Please, how to solve this problem?
Thanks you in advance for your answers.

user639304 wrote:
Hi everybody,
I'm trying to use LogMiner with Oracle 8.1.6.0.0. When I execute the following code with SQL*Plus, I have an error.
BEGIN
DBMS_LOGMNR.START_LOGMNR
(options =>
dbms_logmnr.dict_from_online_catalog);
END;
The error displayed by SQL*Plus is:
PLS-00302: 'DICT_FROM_ONLINE_CATALOG' must be declared.
Please, how to solve this problem?
Thanks you in advance for your answers.Looking at the 8.1.7 doc set (the oldest available on tahiti) I get no hits when searching for 'dict_from_online_catalog'. Searching the 9.2 doc set turns up a reference. Looks like you are trying to use an option that isn't available in your version of Oracle.

Capturing error messages from Oracle EBS APIs when using Oracle Apps Adapter

We are using Oracle applications adapter to call Oracle EBS (both R11.5 and R12) APIs. I want to understand the best practice around error handling when using Oracle Apps Adapter to call Oracle EBS.
Here are some observations:
1. Most of the APIs return X_RETURN_STATUS and X_MSG_DATA containing the status and messages if any.
2. If the MSG COUNT is 1 then X_MSG_DATA contains the message, if MSG COUNT is > 1. X_MSG_DATA is empty.
We know that when calling the API directly from PL/SQL, we need to loop through FND_MSG_PUB to fetch all messages when there are more than 1. How do we achieve the same using Apps Adapter as Apps Adapter generates the PL/SQL block to call the API dynamically at runtime.
In some APIs, which have table/rec types as input or output parameters, Apps Adapter generates a wrapper package to do conversion from SQL--> PL/SQL and viceversa. In this case the adapter calls the custom package generated which internally calls the API. For these APIs we were able to put the logic to loop through FND_MSG_PUB and return a concatenated string as value of X_MSG_DATA.
But what should we do for the APIs which do NOT have a rec/table type as input or output, in which case the Apps Adapter directly calls the API and there is no intermediate custom package?
How are others handling this?

Please see the section "Handling Functional Errors" in the below link
Oracle Fusion Middleware Adapter for Oracle Applications User's Guide

Best practice when using Tangosol with an app server

Hi,
I'm wondering what is the best practice when using Tangosol with an app server (Websphere 6.1 in this case). I've been able to set it up using the resource adapter, tried using distributed transactions and it appears to work as expected - I've also been able to see cache data from another app server instance.
However, it appears that cache data vanishes after a while. I've not yet been able to put my finger on when, but garbage collection is a possibility I've come to suspect.
Data in the cache survives the removal of the EJB, but somewhere later down the line it appear to vanish. I'm not aware of any expiry settings for the cache that would explain this (to the best of my understanding the default is "no expiry"), so GC came to mind. Would this be the explanation?
If that would be the explanation, what would be a better way to keep the cache from being subject to GC - to have a "startup class" in the app server that holds on to the cache object, or would there be other ways? Currently the EJB calls getCacheAdapter, so I guess Bad Things may happen when the EJB is removed...
Best regards,
/Per

Hi Gene,
I found the configuration file embedded in coherence.jar. Am I supposed to replace it and re-package coherence.jar?
If I put it elsewhere (in the "classpath") - is there a way I can be sure that it has been found by Coherence (like a message in the standard output stream)? My experience with Websphere is that "classpath" is a rather ...vague concept, we use the J2CA adapter which most probably has a different class loader than the EAR that contains the EJB, and I would rather avoid to do a lot of trial/error corrections to a file just to find that it's not actually been used.
Anyway, at this stage my tests are still focused on distributed transactions/2PC/commit/rollback/recovery, and we're nowhere near 10,000 objects. As a matter of fact, we haven't had more than 1024 objects in these app servers. In the typical scenario where I've seen objects "fade away", there has been only one or two objects in the test data. And they both disappear...
Still confused,
/Per

Using Mts With Oracle Database

I m building Com using Visual basic.I have made them transactional using MTS.first i have firstly user Sql Server database.the components are working properly.but when i
have made back end as Oracle the Trasactions
fails. if i make them not Mts object then it will function properly. I have read article from microsoft site "Using Mts with Oracle".acc to them a file named XA80.dll should be on ur system on which mts is runing.I have made a database server and a client on which Mts is installed.But XA80.dll
was not found. whats the problem .tell me solution if anyone can.
i have installed OEM GUI which installs XA80.dll on ur system.but when i tested microsoft test program which checks weather ur Oracle supports Mts or not fails at the end. When calling XA_Open_Entry it gives error with return code -3
Plz tell me Solution
Thankx in advance
null

Hi,
Oracle JVM in 11gR2 (the latest release) supports Java 1.5 only. So no, you won't be able to load classes compiled with target class level 1.6 into DB. But you surely may explicitly set target class level of 1.5 in javac and then load compiled classes. Or you may not use 1.6 features in your code and then CREATE JAVA SOURCE from it.

Error - Oracle Apps Adapter

Hi,
I am getting the following error when I invoke oracle Apps Adapter.
The same working pretty well in DEV and when we moved the code to SIT its behaving this way.
Another issue is even though in the flow trace, it says faulted, but I can still see the record in the db and on top it adds as many duplicate records as no of faults in the flow trace.
<fault>
<bpelFault>
<faultType>0</faultType>
<remoteFault>
<part name="summary">
<summary>Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'invoke_ar_inbound_st_proc' failed due to: DBWriteInteractionSpec Execute Failed Exception. unknown failed. Descriptor name: [unknown]. Caused by java.sql.SQLException: Cannot call Connection.commit in distributed transaction. Transaction Manager will commit the resource manager when the distributed transaction is committed.. Please see the logs for the full DBAdapter logging output prior to this exception. This exception is considered retriable, likely due to a communication failure. To classify it as non-retriable instead add property nonRetriableErrorCodes with value "0" to your deployment descriptor (i.e. weblogic-ra.xml). To auto retry a retriable fault set these composite.xml properties for this invoke: jca.retry.interval, jca.retry.count, and jca.retry.backoff. All properties are integers. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. </summary>
</part>
<part name="detail">
<detail>Cannot call Connection.commit in distributed transaction. Transaction Manager will commit the resource manager when the distributed transaction is committed.</detail>
</part>
<part name="code">
<code>0</code>
</part>
</remoteFault>
</bpelFault>
</fault>
___________________________________________________________________

Either remove the hard commit statements from your PL/SQL procedure/package or use non-XA data-source.
Regards,
Anuj

Having problem in using RUN_PRODUCT in oracle apps 11.0.3

I am having problem in using RUN_PRODUCT in oracle apps 11.0.3. Error in oracle apps is
FRM-40733 PL/SQL built-in RUN_PRODUCT failed
What could be the possible cause for this error ?

Hi again;
I found this please also check this:
Price List Migration from 11.0.3 to 11.5.10/R12.
Regard
Helios

Using XA with Oracle ERP application

Hi,
We have two Tuxedo Domains that we need to establish global transaction:
First Domain - Tuxedo 6.4 with Oracle 8.0.6 database.
Second Domain - Tuxedo 6.4 with Oracle ERP application (Oracel version 8.0.5)
A Client that calls a Tuxedo server in the first domain this service doing some work
on the database and then calls another service in the second domain (using Domain
connection).
The service in the second Domain activate a Oracle API (package) from the ERP application.
The Rollback works but we problem with the commit. We recieve the following Oracle
Error - ORA-06574: Function "VIEW_ALL" references package state can not execute remotly.
Revital Bloom
[email protected]

Subbu,
As I mentioned earlier in this thread, support for Oracle RAC has been
implemented in Tuxedo 9.1 and in the Tuxedo 8.1 and Tuxedo 9.0 rolling patch
streams. There are no plans to backport this feature to Tuxedo 8.0. If you
plan to use RAC transactionally and if it is possible for multiple services
that could be located on different RAC instances to be accessed in a single
transaction (which will be true for most applications), then you should
upgrade to a version of Tuxedo with support for Oracle RAC. The
documentation at http://e-docs.bea.com/tuxedo/tux91/ads/adorac.htm#248431
gives an overview of RAC support in Tuxedo.
Ed
<Subramonian Arumugom> wrote in message news:[email protected]..
Hello Nadeer, Hello Ed,
Has the implementation of Tuxedo8.0 with Oracle RAC was completed
successfully ?.
If it is done , I have few doubts. Could you please help me ?.
1) I hope your Tuxedo middleware connects to the oracle Database using
Oracle XA resource manager and the TMS server built using buildtms with
oracle as RM .As per the mail from Ed, migration of Tuxedo9.1 should be done
before moving to Oracle RAC.
Also from BEA documentation, Oracle RAC support was given as new feature in
Tuxedo9.1.
Our Application uses Oracle RM to connect to Oracle DB[ Oracle 10g] from
Tuxedo8.0. So do we need to upgrade to Tuxedo9.1. for using Oracle RAC ?.
Thanks for your help
Best Regards
Subbu
#9880278452
Edited by subramonian.a at 04/16/2007 12:15 AM
Edited by subramonian.a at 04/16/2007 12:19 AM
Edited by subramonian.a at 04/16/2007 1:37 AM
Edited by subramonian.a at 04/16/2007 8:20 AM

Integrating mod_plsql reports with Oracle Apps. A maddening dilemma.

I'm hoping there is some guru out there that has the perfect solution to this maddening dilemma I'm facing.
The crux of the issue is this.
I've created mod_plsql reports that can accept a session_id with which they can set a user context based on global application contexts set in Oracle applications by users as they log in.
At this juncture, I have not figured out a way to call those mod_plsql reports from Oracle apps using a variable session_id as defined for the user when they logged into apps.
My client want to be able to log into Oracle apps and then go to the mod_plsql reports from the Oracle Apps menu and maintain the user session, so that the mod_plsql reports are run using VPD to constrain access to the data they are displaying to that specific user.
The client does not have Single Sign On installed nor OID.
I had hoped to pass a variable parameter session_id from the defined menu function that would call the mod_plsql url, but I don't see any way to pass a variable there and am becoming convinced that doing so is not an option. Can anyone confirm this?
An alternate option I'm considering that seems like it would work is to create a JSP page that gets called from a menu function. In that JSP page, I would retrieve the session_id set in apps based on the context for the user_id that I could retrieve from fnd_global.user_id and assemble a URL with the session_id that the page would then re-route to the mod_plsql page.
Unfortunately, I'm not versed in JSP.
How hard would it be to create the sort of page that I'm talking about?
Would the JSP need to part of OAF?
Can anyone think of any other options that would take care of the issue I'm dealing with?
Thanks.
Kurt

See answer on other forum: Integrating mod_plsql reports with Oracle apps. Maddening dilemma.

Binding Error while calling Oracle Apps Adapter

Hi,
I have configured an oracle apps adapter to be called from the a BPEL Process in Jdev. The operation is to insert data in an oracle interface table.
I m getting the following error when the BPEL process is invoked from Console. Please suggest where could be the problem.
<bindingFault xmlns="http://schemas.oracle.com/bpel/extension">
-<part name="code">
<code>null
</code>
</part>
-<part name="summary">
<summary>
file:/C:/SOA/product/10.1.3.1/OracleAS_1/bpel/domains/default/tmp/.bpel_BPELProcess1_2.0_70717543df91cf3e80346845ccf64937.tmp/OraAppAdp.wsdl [ OraAppAdp_ptt::insert(RaCustomersInterfaceAllCollection) ] - WSIF JCA Execute of operation 'insert' failed due to: DBWriteInteractionSpec Execute Failed Exception.
insert failed. Descriptor name: [OraAppAdp.RaCustomersInterfaceAll].
; nested exception is:
ORABPEL-11616
DBWriteInteractionSpec Execute Failed Exception.
insert failed. Descriptor name: [OraAppAdp.RaCustomersInterfaceAll].
Caused by java.lang.NullPointerException.
</summary>
</part>
-<part name="detail">
<detail>null
</detail>
</part>
</bindingFault>
I have checked the oc4j-ra.xml , data-sources.xml and the connection factory on the enterprice manager.
Thanks
varun

Hi all,
i have exactly the same error and use the same applications and adapters.
i don't know what's wrong.
i thing the connection pool can open the connection to the database, but cannot write anythin in the database. maybe the Table cannot be found, but it's only a guess.
Any other idea or maybe a solution?
regrads

Error testing webservice using ESB with Oracle apps adapter services

Similar Messages

Maybe you are looking for