Office 2010 App-V on machine with Office 2013 installed

Hi,
After a migration to locally installed Office 2013 I need to restore access to Access 2010 to some users for a legacy app. Ideally I want to use App-V. I have made an App-V package of Access 2010 following the MS guidance. It runs correctly
but every time after running it, the next time you run an Office 2013 app it causes Office 2013 to perform a repair operation, this succeeds but has to be done every time the 2010 Access is run. I can't find any reasons in the log files or in the event
viewer, any ideas?
Thanks

Thanks, I couldn't really find anything but it looks as though this could be just the way it is.
from http://support.microsoft.com/kb/2784668
When you start a version of Access on a computer that has multiple versions of Access installed, the Windows Installer may start, and
a message that states that the Windows Installer is preparing to install Access may be displayed before Access starts.
Every time that you start Access 2003, Access 2007, or Access 2010 after you use Access 2013, the Windows Installer repair operation registers
that version of Access. Similarly, the Windows Installer repair operation registers Access 2010 every time that you start it after you use an earlier version of Access. This does not occur when you start Access 2002, nor does it occur when you start the same
version of Access again.
Is this likely to also apply even when running App-V?

Similar Messages

Should I have installed Microsoft Office 2010 Filter Pack 64 bit with Ex 2013 SP1?

I have installed Exchange 2013 SP1 on a 2012R2 server, and all went well (I am at early stages of migration).
Following the pre-reqs listed here: https://technet.microsoft.com/en-us/library/bb691354%28v=exchg.150%29.aspx#WS2012
I installed Microsoft Unified Communications Managed API 4.0, Core Runtime 64-bit only.
Since then I have seen other articles suggesting that I install:
Microsoft Office 2010 Filter Pack 64 bit
Microsoft Office 2010 Filter Pack SP1 64 bit
Given I didn't notice any errors in the install, do I need to install those filter packs or is that outdated advice?
regards
Roga

Thanks for taking the time to post Ed
I did a bit more research and it appears that there is more than one view on this.
E.G. this blog
Why Exchange 2013 doesn’t need the Microsoft Office Filter Pack says:
"Exchange 2013 swaps MSSearch for the Search Foundation, a component shared with SharePoint 2013. The Search Foundation has no need of the Office Filter Pack because it includes its own filters. Unfortunately, until SP1 came along,
the Exchange 2013 Setup program overlooked this fact and stated that the Office Filter Pack was a prerequisite. Setup would install if the Office Filter Pack was missing, but who’s going to ignore a warning issued by Setup. In any case, that warning seems
to have finally been suppressed."
This blog
Planning and migrating a small organization from Exchange 2007 to 2013 (Part 10) has:
"After choosing the relevant setting needed to begin installation, the Exchange 2013 setup program will now perform readiness checks. Assuming these complete successfully, we'll expect to see just one warning.
This warning relates to the lack of the Office 2010 Filter Packs, which are not required for installation, and are only required to create Transport Rules for OneNote or Publisher files"
And this one
Exchange Server 2013 FAQ: Is the Office Filter Pack Required?
"The Exchange 2013 pre-requisites page on
TechNet, at the time of this writing, does include the Office Filter Packs as a step in the preparation of a server for Exchange 2013. What it doesn’t make clear is that they are not required.
The new Exchange Search already has support for indexing/searching Office file types, as well as a series of other file types including some third party formats such as PDF. You can see a full list
here.
So should you install the Office Filter Pack? If you want to stop seeing that warning message, then yes. If you want to take the approach of only installing required software on your servers, then no. Consider also that installing it means potentially having
to update it later on if there is a bug fix or a security issue."
The final para above is the approach that I have now taken, but if someone can give me a good reason to install office 2010 filter packs on Ex 2013 sp1 I'll revise my view
regards
roga

Office Web Apps Server Name issue with Sharepoint 2013

I have a POC Lab setup for SharePoint/OfficeWebApps with SSL offloading. I am using IIS reverse proxy for my SSL offloader. Most systems can connect to SharePoint and OWA through the Loadbalancer and create documents as desired. The
configuration is as follows:
DNS points:
sharepoint.contoso.com to the reverse proxy address that handles sharepoint.
owa.contoso.com to the reverse proxy address that handles owa.
My OfficeWebApps farm uses an internal and external url of
https://owa.contoso.com and uses ssloffload.
My SPWOPIBinging connects to owa.sharepoint.com (through the reverse proxy) and is configured with the external-https zone.
The name of the OWA server is nyc-owa1.contoso.com.
The issue is as follows:
If I flush my dnscache before connecting to
https://sharepoint.contoso.com, and then use OWA in sharepoint, my client DNS cache will list sharepoint.contoso.com, owa.contoso.com AND nyc-owa1.contoso.com!
Where is is getting the name of the actual owa server?
If I simulate an Internet client that cannot resolve the internal name nyc-owa1.contoso.com, but only the public names of sharepoint.contoso.com and owa.contoso.com, the client cannot successfully edit a new or existing file with OWA, the browser hangs with
Java errors ('SYS' is undefined etc.)
When I add either the real IP address of the server nyc-owa1.contoso.com OR the reverse proxy address for nyc-owa1.contoso.com to a hosts file, the client works normally.
I would like to know how the client is getting the OWA server's name and how to control that behavior.
Thanks for reading this!!
-Scott

I'm glad to here that the problem has been fixed. Thank you for sharing your experience here, it will be helpful to other community members who have similar questions.
Cheers,
Steve Fan
TechNet Community Support

Unable to print multiple copies of documents on Win7 machine with Office 2010

Since upgrading to Windows 7, I have been unable to print multiple copies of documents in any MS Office 2007, 2010, Word Pad or Adobe Reader 9. I also experience the same problem if I print from Word Pad. The issue appears to be associated with the Collate Option in the Print Dialog box. If the Collate box is checked, I only get one copy of the document. If I uncheck the Collate box I get as many copies as I choose. The problem is that with the Collate box unchecked, I have to collate multiple copies by hand, and with 10 – 20 copies of multi-page documents that can be quite a chore.
The ironic thing is that MS Visio 2003, on the same machine, prints and collates as many copies as I choose, with the Collate box checked.
I can print multiple copies of Word 2003 documents from my wife’s Win XP machine to the same printer, but not from my Win 7 machine with Office 2010.
My printer is an HP LaserJet 1320nw and I have downloaded and installed the latest printer drivers from the HP Web site.
Has anyone experienced this problem, and if so, are you aware of a solution other than unchecking the Collate box?

I have the same issues with my LJ1320. I have Office 2010 and Windows 7 Ultimate 64 bit. However, my printing problem is more widespread since I have been unsuccessful at printing multiple copies of all types of documents, not just from Office 2010. For example, I have the same problem trying to print multiple copies from Internet Explorer.
I also have other problems printing from Office 2010 that you may not have discovered yet. I cannot print Excel spreadsheet grid lines from Office 2010 if those documents were originally created in an earlier version of Office. I tried saving them as Office 2010 documents and also using compatibility mode but nothing worked. These same documents print fine on the same printer from my laptop which uses Windows Vista and Office 2007. Also Excel spreadsheets originated in Office 2010 print nicely.
Looks like HP has a few bugs in their printer drivers.
I note that HP released a new Universal Print Driver for Windows PCL5x64 on Feb 18, 2011 (Version 5.2.6). Have you tried it yet?

Lync 2013 OCT deployment on machines with Office 2010. Installation Failure

Hi,
In our environment, we have Win7, Office 2010 x86. (no plans to upgrade all of Office to 2013 as yet)
I'm trying to deploy Lync 2013 x86, and have packaged an MSP using "setup /admin" for later deployment via SCCM.
Now I know there are no problems running Lync 2013 with Office 2010 as it works fine if you manually install.
Strange thing is, when I try running the setup with MSP for silent install, it runs silent and all looks well although all the Office Tools shortcuts are created and there are files under the Program Files folders for Office\15.0 as expected
but not Lync itself. ie: no lync.exe file or shortcuts.
Reviewing the setup log doesn't show any obvious errors that I can tell.
Also after this, if I go through the "Add/Remove Components" under Uninstall Programs\Lync 2013, and I can see in there that it DOES already show Lync as being installed, if I just click continue, it runs through the setup process and
then Lync will be installed
I've also tried this same process using the Full "Office Pro Plus 2013" and only select Lync to install and the same thing happens.
Has anyone else come across this issue or could point me in the right direction.
For the OCT (setup.exe /admin) the only settings I've changed from defaults are:
- Filled in the Organisation name
- Set KMS licensing, display level to none and suppress modal
- some regkeys for some default settings for GalDownloadInitialDelay, ShownFirstRunOptin
- Force on Lync (Run from My Computer)
I'm running "setup.exe /adminfile Lync_x86.MSP" in my case to test this MSP.

I had the same issue. As soon as I updated to the latest Admin admx/opal files, it worked great.
Cheers,
JeffCSP
This issue was introduced when SP1 was released, and is detailed here:
http://blogs.technet.com/b/odsupport/archive/2014/03/21/lync-2013-and-onedrive-for-business-are-not-installed-when-installing-office-2013-with-service-pack-1.aspx
(it remains uncorrected by MSFT :(
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

I have a new PC laptop with Windows 7 and Office 2010. I have an Airport Extreme, and installed Bonjour on my laptop. Bonjour "sees" my printer. When I try to print, the printer lights up -- but doesn't print. anyone have an idea? Thanks Gregg

I have a new PC laptop with Windows 7 and Office 2010. I have an Airport Extreme, and installed Bonjour on my laptop. Bonjour "sees" my printer. When I try to print, the printer lights up -- but doesn't print. anyone have an idea? Thanks Gregg

Hi Kelly,
As someone who has to print from my Mac to a networked printer at home all the time, I can certainly understand how frustrating it must be to have that fail to perform as expected. Let's see if we can get you up and running.
I would suggest that you troubleshoot using the steps in this article -
OS X Yosemite: Printing troubleshooting
Start with the section titled Check the network.
Thanks for using Apple Support Communities.
Sincerely,
Brett L

None of the Office 2010 apps will open, any suggestions. Worked fine until about 3 days ago

None of the Office 2010 apps will open, any suggestions. Worked fine until about 3 days ago

as it turns out - I think it might be Ram related... crash log has this..
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000000

Windows 8 Mail App - Not setting up with Office 365 Account

Hi - I'm trying to get an Office 365 Exchange account set-up with the Windows 8 Mail app. It's giving me an error stating the following:
To sync this account, you first need to: Make your Windows user account an administrator.
I do not want to give admin privileges to the individual user account on Windows (as the error is stating that it wants me to give admin privileges to the local Windows 8 account - not on Office 365) and I cannot find any restriction set-up in the admin
console/settings on Office 365 (or in Widows 8) that would require this privilege.
This same account (on Office 365) can connect fine via Outlook 2010 and a Windows Phone 7 mail app.
How can I solve this?..

Derek,
Can you please share the UAC setting or GPO settings you used to fix this in Windows 8? I've gone to the lowest available setting in the UI (there appears to be a lower limit that a NON-admin user can manually set UAC to and to get any other levels,
you need to use GPO) and still no luck.
Thx,
DML
DLovitt

Sorry, something went wrong - Open Office File from Search Results Page with Office Web Apps

Hi,
I'm getting "Sorry, something went wrong" error when I'm trying to open any office document from inside Search Results Page with Office Web Apps, the same error is appearing in the document preview as well.
The error in SharePoint logs says that the file cannot be found.
Please note that this error is coming only when the "Filename" of the document is not written in English (in my case its written with Arabic characters).
If I try to open it from the document library, its opening properly with no errors.
The only difference between two URLs (document URL in Search Results and in Document Library) is the value for "sourcedoc" attribute;
In the case of Search Results page, the filename in "sourcedoc" attribute is kept as is with Arabic characters.
While in the Document Library, the filename in "sourcedoc" attribute is converted into different characters (something like: "B9%D9%85%D9%8").
Anybody have an idea on how to overcome this issue, implement a workaround or modify the "sourcedoc" behavior?
Thanks in Advance.
Hamza AlSughier

Dear Wendy,
Thanks for your efforts, I already tried your last suggestion before, but this didn't solve my problem.
Actually my end users are accessing this portal using ADFS and HTTPS.
Finally I got this solved, I have done below to get my overall solution working perfectly:
- First I have configured Windows Authentication and ADFS Authentication on the same zone which is the default zone.
- The issue when opening office documents with Arabic file name has disappeared as a result of first change.
- Then I have faced an issue where we are not able to crawl content under Default zone, however we have to do so, after too many efforts, I found that its related to the Load-balancer/proxy, I have made the crawler server
to crawl himself (http://CrawlServerName:PortNumber).
- Also a change on Alternate Access Mapping was needed, I have set one of the extended zones (which is running Windows Authentication only) as Internal URL for the Default Zone, and this is was the URL I used for Crawling.
I have configured Server Name Mappings to make sure we got proper URLs in Search Results.
- Then we faced another issue, which is Authentication selection on login page (How to bypass this page, and authenticate using ADFS auto), I used this solution (Set Custom Sign In Page):
http://0ut0ftheb0x.wordpress.com/2014/01/04/skip-the-authentication-selection-page-at-_logindefault-aspx-in-a-mixed-authentication-environment/.
- I faced one more issue as a result of above workaround; Sign Out functionality wasn't working well; users get logged in automatically whenever I click on Sign Out. I solved this by modifying the "Sign Out" Control under _layouts;
I made it to redirect users to ADFS Sign Out Page instead of SharePoint Sign Out Page (I know its not recommended, but I don't have any other option).
Hamza AlSughier

Outlook office 2010 of 64 bits Integration with Sap 8.8 PL 17

Dear Experts:
Has anyOne had experience with outlook Integration office 2010?
I have a customer with one client running 8.8. and office 2010 of 64Bits, i make instalation the addon ( outlook ) , and this running ok, but a log in outlook does not appear the icon sap business one, when search it on the complement of outlook i dont find.
You know if this OI running on office 2010 of 64bits?.
Thanks for you help
Regards,
Ma.Cristina Gonzalez

Hi Maria,
I have SBO 8.8 PL18 and MS Outlook 2010 and the SBO Icon is available in the Add-ins and the Log settings are also available.
Please check if you outlook add-in has not been enabled or blocked.
In MS Outlook 2010 File --> Options --> Add-ins --> in the Active application add-in's do you find SAP available. if not see in the disabled if its still not available
You will find manage in the last --> selct COM -Addins --> check if you have SAP business One flagged.
Ensure that you Macro settings are set to be enabled.
File --> Options > Trust Centre> Trust centre settings --> macro settings --> Enable all macro's and flag apply macros to all Add-ins.
Do you have the Outlook integration server installed in the server or outlook integration standalone installed on the Client
Regards,
Rakesh N

Office 2010 post SP2 updates deploy with MDT

So I'm looking forward to deploy my office 2010 pro plus (VLK media, activating via KMS host) with MDT, and I have some configs setup using Office Customization Tool to install it. I have the SP2 installer that installs after Office 2010 is installed.
Everything works well, however until i realize that are still a few hundred MB's of update (security patches etc) after the SP2 install. So allowing MDT to install the update on run time is not ideal ( consumes more time and bandwidth) so my question is where
can I get all the post SP2 updates for office pro 2010? (I'm assuming they're all .msp files where i can dump it all into the update folder in office).
Thank you for your feedback!

Hi Jack,
Microsoft Office sustained Engineering team publish news about security updates, public updates, service packs for Office in this site:
http://blogs.technet.com/b/office_sustained_engineering/archive/tags/office+2010/default.aspx
You can find all the Office updates that released each month in this site. However, the updates that applicable to your computer are really depend on your setup environment, not all that released are applicable.
I would suggest you to go to Windows Update, and Check for updates. Windows Update will automatically search updates that are applicable to your computer. You can choose to download the updates manually and save it
to your computer.
Thanks,
Ethan Hua CHN
TechNet Community Support

Cannot open Office 2010 apps in Windows 8

I have had my Windows 8 computer for one year. I have installed the Windows 8 update and have Windows updates coming in automatically. In the past few weeks I cannot open any of the Office apps.. they start to open and then stall out. If I restart the computer
and immediately try to open Word or Excel, they will open. Any ideas on how to fix this?

Hi,
As far as I know, Windows 8 has new feature "Fast Startup" start when we shut down the PC. It stores some data, like kernel session, device drivers, system information, in a file in the system level memory and when you switch it back on, Windows
uses data stored in this file to resume your system and since reading this file and re-initializing of device drivers is much faster.
I notice that restarted the computer, and Office worked fine. I think the Office programs closed the Office completely.
Please try to disable the "Fast Startup" to test.
http://nvidia.custhelp.com/app/answers/detail/a_id/3152/~/disable-windows-8-fast-startup-%28hibernate-file%29
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information
Regards,
George Zhao
TechNet Community Support

Office 2010 - "Word cannot print, there is no printer installed"

Hi All,
Been having a problem recently on many PC's at a site where they run Windows 7 x64 with Office 2010 x86.
Printing usually happens with no issue, however sometimes when they click the print icon, (in the 'file-->print' section) it will display 'word cannot print, there is no printer installed'.
The client tells me they can go to control panel and print a test page successfully, but word/excel will not print. In order to resolve the issue they close the program, reopen it and printing works straight away. Today I asked them to restart the print
spooler, instead of closing/reopening word, this did not resolve the issue. closing and reopening did fix the issue.
So far they have experienced the issue with Word and Excel only, however they don't use the other programs a great deal.
The printers are distributed with group policy. In addition to network printers they use PDF Factory (which is like PDF Creator).
I have been unable to reproduce the issue.
Any thoughts would be greatly appreciated, thank you!

Hi,
From your description , I understand that you got message ”word cannot print, there is no printer installed” when clicked the print icon.
If you do not have a default printer, use the Add Printer Wizard to install one.
Follow these steps:
Click Start and then click Devices and Printers.
Under Printer Tasks, click Add a printer, and then follow the instructions to install your default printer driver.
Note If your printer model is not listed in the Manufacturers and Printers lists, see the Hardware
Compatibility List (HCL) for an updated driver. To do this, visit the following Microsoft Web site:
http://www.microsoft.com/whdc/hcl/default.mspx
If your printer is not on the HCL, contact the printer manufacturer for drivers and instructions.
Sincerely,
Harry

Will office web apps preview msg files in Sharepoint 2013

We are filing Outlook msg files into sharepoint and want to be able to preview the files without opening them one by one.
Will office web apps do the work?
Thanks

No, OWA does not support msg file types.
SharePoint - Nauplius Applications
Microsoft SharePoint Server MVP
MCITP: SharePoint Administrator 2010
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Cannot open word documents without it asking me to purchase Office 2010 buy I do have Microsoft Office.

I have been using Word Starter 2010 for almost 2 years now but a few days ago I went to open a document and it said "The Microsoft Office product necessary to open this file is not installed on your computer." I click activate and it asks for
a product key which I don't have because I am just using the copy that was installed into my computer when I bought it almost 2 years ago. If I go to Word Starter 2010 itself I can open these documents however I cannot just click on the icons. Can someone
help please! Thanks.

Hi
There might be file association problem with your Office program, we recommend you right click on the file>Open with and select Office Starter as the default program to open these files.
We might also do a repair for Office Starter: Control panel>Program and features>Office Starter>Change>Repair
Regards
Tylor Wang
TechNet Community Support

Office 2010 App-V on machine with Office 2013 installed

Similar Messages

Maybe you are looking for