Error :The user cannot be enabled because the end date is passed.

Hi
While running eBusiness HRMS Terminated Reconciliation, OIM picks the Users End Date and if that End Date is passed, the user is Disabled. I think the connector should behave this way. Pls correct me if I am wrong.
But, what's happening is, when I run the eBusiness HRMS Terminated Reconciliation, I am getting the below error and in the recon manager I can see the End Date as earlier date but the user is still Active. It is not changing to Disabled.
ERROR [ACTIVE] ExecuteThread: '12' for queue: 'weblogic.kernel.Default (self-tuning)' XELLERATE.SERVER - Class/Method: tcUSR/validateProvDates Error :The user cannot be enabled because the end date is passed.
ERROR [ACTIVE] ExecuteThread: '12' for queue: 'weblogic.kernel.Default (self-tuning)' XELLERATE.SERVER - Class/Method: tcDataObj/save Error :Data Update Failed
ERROR [ACTIVE] ExecuteThread: '12' for queue: 'weblogic.kernel.Default (self-tuning)' XELLERATE.DATABASE - Class/Method: tcDataBase/rollbackTransaction encounter some problems: Rollback Executed From
java.lang.Exception: Rollback Executed From
     at com.thortech.xl.dataaccess.tcDataBase.rollbackTransaction(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.rollback(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.doRollback(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
     at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
     at com.thortech.xl.dataobj.tcRCE.modifyUserStatus(Unknown Source)
     at com.thortech.xl.dataobj.tcRCE.linkToUser(Unknown Source)
     at com.thortech.xl.dataobj.tcRCE.applyActionRules(Unknown Source)
     at com.thortech.xl.dataobj.tcRCE.checkDataSorted(Unknown Source)
     at com.thortech.xl.dataobj.tcRCE.eventPostUpdate(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
     at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
     at com.thortech.xl.dataobj.tcRCE.reapplyRules(Unknown Source)
     at com.thortech.xl.ejb.databeansimpl.tcRCEBean.reapplyRules(Unknown Source)
     at com.thortech.xl.ejb.beans.tcRCE_4tknfu_EOImpl.reapplyRules(tcRCE_4tknfu_EOImpl.java:200)
     at com.thortech.xl.ejb.beans.tcRCE_4tknfu_EOImpl_WLSkel.invoke(Unknown Source)
     at weblogic.rmi.internal.activation.ActivatableServerRef.invoke(ActivatableServerRef.java:85)
     at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:477)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:473)
     at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
ERROR [ACTIVE] ExecuteThread: '12' for queue: 'weblogic.kernel.Default (self-tuning)' XELLERATE.SERVER - Class/Method: tcDataObj/save Error :Data Update Failed
ERROR [ACTIVE] ExecuteThread: '12' for queue: 'weblogic.kernel.Default (self-tuning)' XELLERATE.DATABASE - Class/Method: tcDataBase/rollbackTransaction encounter some problems: Rollback Executed From
java.lang.Exception: Rollback Executed From
     at com.thortech.xl.dataaccess.tcDataBase.rollbackTransaction(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.rollback(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.doRollback(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
     at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
     at com.thortech.xl.dataobj.tcRCE.reapplyRules(Unknown Source)
     at com.thortech.xl.ejb.databeansimpl.tcRCEBean.reapplyRules(Unknown Source)
     at com.thortech.xl.ejb.beans.tcRCE_4tknfu_EOImpl.reapplyRules(tcRCE_4tknfu_EOImpl.java:200)
     at com.thortech.xl.ejb.beans.tcRCE_4tknfu_EOImpl_WLSkel.invoke(Unknown Source)
     at weblogic.rmi.internal.activation.ActivatableServerRef.invoke(ActivatableServerRef.java:85)
     at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:477)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:473)
     at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
I dont know why OIM is trying to Enable User.
Pls Help
Edited by: AAG on 25 Jan, 2011 4:12 AM
Edited by: AAG on Feb 3, 2011 12:43 AM

I am getting the same error. Any idea which field OIM considers as signal of disabling the user? Status or Termination date?

Similar Messages

  • How do I resolve itunes error message " ipod cannot be used because the apple mobile device service is not started"?

    After I had Best Buy restore my ipod to factory settings,  went to itunes from computer to restore my music. Getting the error message " Ipod cannot be used because the apple mobile device service is not started". Ipod is connected to Wi-Fi, connecting to itunes o.k. on ipod

    http://support.apple.com/kb/TS1567
    There have been some problems accessing pages on the Apple web site.  If the hyperlink gives you a "We're sorry" message, try again.

  • When trying to sync my iphone in itunes i keep getting the error message "itunes cannot sync apps because the apps installed on the iphone could not be determined." can anyone explain what this means?

    when trying to sync my iphone in itunes i keep getting the error message "itunes cannot sync apps because the apps installed on the iphone could not be determined." can anyone explain what this means?

    I received the same error message after I had recently updated iTunes to 10.5.1 and I had wirelessly updated 13 apps.  I had to go into iTunes and select Apps, on the bottom right it said I needed to update 13 apps.  I updated the apps via iTunes and then synced again without an issue.
    iPhone 4S / OSX 10.6.8 / iTunes 10.5.1

  • Calendar syncing cannot be enabled because there are no calendars available.

    I have iCloud calendars and a google calendar, but iTunes says I have no calendars. Endless loop. How do I break out of this?

    I tried this but when I go back to check Sync Calenders I get this message:
    "No calendars available.  Calendar syncing cannot be enabled because there are no calendars available. Do you want to open Calendar and create a calendar now?"
    When I open calenders it show I have two calender On My Mac.
    The same applies to Sync Contacts.
    I have tired Restore iPod but that did not make any difference.  This problem occurs across all logins on my Mac.
    I've Reistalled OS X but that did not help either.
    Thank you for your  suggestion.

  • Accidentally copied microsoft word icon  to desk top.   Now program will not work. Error message says cannot be opened because of problem. How do I re-install ?

    Accidentally copied microsoft word icon  to desk top.   Now program will not work. Error message says cannot be opened because of problem. How do I re-install ?

    Drag the Word icon back to where it belongs.
    Applications > Microsoft Office 2011 > Put Word there.
    I'm assuming you have Office 2011. If you have 2008 there should be a similar location to put Word.

  • When i install latest itunes gives an error the configuration data for this product is corrupt.how can i i fix it

    hi there
    i was trying to install latest itunes it gives error
    the configuration data for this product is corrupt contact your personal support
    how can i fix it and what is the reason for this error

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • Bonjour64 error: "The configuration data for this product is corrupt.  Contact your support personnel."

    Have use WinRAR to pull out only Bonjour64 from iTunes 11.1.5 (and prior releases) to do an install of only Bonjour, as all other iTunes-related software loads fine (have used 11.1.4 and new 11.1.5).  I get the error: "The configuration data for this product is corrupt.  Contact your support personnel."  Have tried everything suggested on net and this forum, including uninstalling everything, cleaning registry, disabling firewall, etc.  Not worthwhile to reinstal Windows 7.  What do I do? 

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page). Here's a screenshot showing the particular links on the page that you should be clicking:
    After clicking one of the circled links, you should be taken to another page, and after a few seconds you should see a download dialog appear for the msicuu2.exe file. Here's a screenshot of what it looks like for me in Firefox:
    Choose to Save the file. If the dialog box does not appear for you, click the link on the page that says "CLICK HERE IF IT DOES NOT". Here's a screenshot of the page with the relevant link circled:
    When the dialog appears, choose to save the file.
    (2) Go to the Downloads area for your Web browser. Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    4) In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • The end date entered occurs before the start date

    Error when setting outlook2010 OK =>
    "The end date entered occurs before the start date "
    BleuOisou

    Hi,
    Just like <Dinae> said above, this behavior occurs because Outlook does not allow you to define a calendar work day that spans midnight.
    As a supplement, please refer to this KB article:
    http://support.microsoft.com/kb/196804/en-us
    Regards,
    Ethan Hua
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Urgent-change the end date for a existing wage type.

    Hi,
    Can u pls let us know how to change the end date for a existing wage type.
    The current end date is 30.8.2008  and we would like to change to 31.12.9999.
    Rgds,

    Use This report RPCLGV00
    The Wage Type Distribution report enables you to display wage types for several payroll periods. It does not take into consideration differences resulting from retroactive payroll. The report shows the current values (number and amount) for each wage type. The report evaluates the payroll records that are marked with update indicator ‘A’ when the report is run. Subsequent reporting runs may not give the same result if - in the intervening period - retroactive payroll has taken place for the evaluation period. The wage type distribution uses the data from the results table RT for the relevant payroll result. The employee’s organizational assignment is also evaluated from the payroll result. This data is taken from the Work Center Basic Pay table (WPBP).
    The wage type distribution offers you the following options for evaluation:
    Individual reporting for a specific personnel number or name.
    Totals evaluation without specifying a personnel number or name.
    You cannot use wage type distribution to run a report for several countries. You can only select payroll areas from one country for reporting.
    Scope of Function
    You use the following parameters to determine how the appearance of the wage type statement:
    Wage type for evaluation
    Enter all wage types that are to be evaluated. If you do not make an entry here, the system selects all wage types. Note that you can only select wage types that occur in the RT table.
    Evaluation start date
    Evaluation start date and evaluation end date define the evaluation period. Enter the year and payroll period for the start of the evaluation.
    Evaluation end date
    This parameter delimits the evaluation period. If you do not make an entry here, only the period from the period from the parameter Evaluation start date is evaluated.

  • Short dump while changing the end date of infotype 0167 through PA30

    Hi all,
    I am getting short dump while changing the end date of infotype 0167(Health Plans) through Tcode PA30.
    dump descript is as below
    An exception occurred that was not caught.
    Runtime Errors         UNCAUGHT_EXCEPTION
    Except.                CX_HRPA_VIOLATED_POSTCOND
    Date and Time          11.03.2010 07:06:26
    What happened?
        The exception 'CX_HRPA_VIOLATED_POSTCONDITION' was raised, but it was not
         caught anywhere along
        the call hierarchy.
        Since exceptions represent error situations and this error was not
        adequately responded to, the running ABAP program
         'CL_HRPA_SAPUP50R_ADAPTER======CP' has to be
        terminated.
    thanks
    shahid

    Search OSS Notes for that.

  • Extending the End Date of Relationship Org. Unit and Position

    Hi All,
    Please help me below.
    Problem: The end date for the relationship between org. unit and position should be set back to 31.12.9999. It was accidentally been set to 31.03.9999 and results to two records in infotype 0001, which the wrong record should be deleted.
    This can only be deleted by changing the relationship end date in PO13 but unfortunately, the user doesn't have any access to this transaction.
    Request: Can you explain to me on how the end date can be change in transaction PPOME or PPOM_OLD as these are the only transactions the user has an access. I'd already explored these transactions but I can't find on how it should be deleted here.
    Thanks!

    Hi Raju,
    Thanks for this information. This was a very helpful answer. But I only need to extend the end date of a particular infotype 0001 record of a particular employee. I think the report will extend all of the records of all the employees in the system. I can't find any parameter in the report wherein I can set the employee number I wish to extend the end date.
    Thanks!

  • How to get the End date of the dynamic period in Financial Reports

    Dear All,
    I have a issue with the Financial Report, I want to show the text under the Heading in the Balance Sheet like 31 DEC 2008 but in this date should be the end date of the dynamic period what user select in the POV.
    Can any one have any idea about this.
    Regards
    rao.

    There are 2 options:
    1. Use the POVAlias text function:
    e.g. <<POVAlias ("Grid1", DimName)>>
    (you could also use POVMember if the items you want is the member and not the alias).
    2. Have a hidden column on the report referencing the POV selection, then reference this in the header.

  • Extend End date after the end date has reached

    Hi gurus,
        We are using SRM5.0 on ECS with backend ECC5.0.
        We notice that after the end date of bid has reached even though there is a bid submitted by supplier , the purchaser still can extend the end date to a later date as long as he has not made the accept or reject choice.
        If it is the case, the purchaser can view the price after the end date reached and then extend the end date and maybe tell other supplier what the price the opponent has submitted. This is not allowed and should be penaltied.
        We just want to know how to avoid this in the term of system. Can we make the
    end date field unchangeable after the end date has reached? or any other solutions?
    Thank you in advance.
    Message was edited by:
            YE Wang

    Hi,
    As Teja and SAndeep mentioned,you can go for either the Approval or BADI approach.
    In case you are implementing the BADI,you can make the concerned fields grayed out so no changes are made but then this would mean that <b>no changes
    </b> can be done at all after the END date has been reached.
    In case of workflow,you can have you starting conditions in which you will compare the end date and the system date .If same,you can trigger  a Workflow for approval of any changes to be done further.So even if the changes are made,the chnages are approved by a higher authority.
    Another way would be to implement the "BBP_DOC_CHECK_BADI" to check whether the end date has been reached and then allow the user to do any changes.You can use the FM "BBP_PD_BID_GETDETAIL" to get the details of the BI and then check.In this case,you can additionally check for other parameters of the User like role,authorisation based on which he can make changes in exceptional cases.
    BR,
    Disha.
    <b>Pls reward points for useful answers.</b>

  • "The end date can't be set to occur before the start date" issue

    I have a subscribed calendar that draws from data in a Filemaker database. In all of these records, the start date & end date are the same. When I try to refresh the description, it fails with a "NSCocoaErrorDomain / error 1560" error, and the console log shows "The end date can't be set to occur before the start date."
    Well, it doesn't occur before the start date. It's the same as the start date. I can work around this by setting my Filemaker database to add a day to the end date, but that's a clunky solution.
    Anyone else run into anything like this?
    (iCal 4.0.3 and OS X 10.6.4, btw)

    It may not be the same problem, but the message was the same (end date...etc). I tore my hair out at the time trying to solve it. It was on my fathers computer. Everything appeared to be correct and consistent. What solved it was logging into MobileMe/account/personal info/time zone, where I found the time zone was wrong. I can't remember the detail now but at the time it seemed like a third place where time had to be correct. Worth your checking there anyway.

  • CRM-ISU: Need to change the END date and Start Date for contract items

    Hi,
    There is an old contract item for which  I need to change the end date
    and there is a new contract item for which I need to change the start date.
    I need to change the contract item end date and start date using some function module in IS-U system (may be as RFC to CRM).Pleaselet me know if any body is ware of this functionality?
    I am aware of a FM EECRM_CONTRACT_DATE_CHANGE which may be used for changing End Date
    but how to change the start date of a new contract item?
    Please let me know if any body is aware of this?
    Thanks

    Hi,
    Hope you can solve it by this [Link1|Re: Function modules; [link2|CRM material;.
    Regards,
    Surjith

Maybe you are looking for

  • HT201272 how many devices can i download an app to?

    I am just wondering how many devices I can install an app on beofre having to purchase it again? Thank you

  • Events in internal tables

    what are the events in internal tables...

  • Mega BPM & Oracle BPM Integration

    is it possible to integrate Mega BPM Process into Oracle BPM? Can we have any connectors or xmg file import function in Oracle BPM?

  • Execute Storage Procedures Parallely

    Hi, I have a list of procedure's name in database table ProcList. ProcList Table Contents are given below. SrNo. ProcName 1 FetchData 2 ProcessData 3 InsertData This all the procedures name I have to fetch from the table & execute all the procedure p

  • 10.4.9 and ipods

    Hello world I have recently purchased old emac for my mum and have tried to connect her ipod nano to her emac ,however it looks like the version of iTunes cant mount the nano....does this mean that I have to update her computer to 10.4.11 for the Nan