Error: "This version of the application is not configured for billing through Google Play."
We are preparing update of app for Google Play and during testing of new version (just downloaded as APK from ftp to device) we've encountered this error. In short it means, that we can't buy new issues, nor download previously bought one.
I'm not able to find in Adobe docs any info about this so far, so i would like to ask for some comment.
What i've found on internet is, that this is some kind of Google Play thing, that after app will uploaded to Google Play and correctly set-up. But would like to hear from Adobe, that this will just work after publishing on Google Play.
Thanks
Martin
Hi Martin,
you do not have to publish the app to test and whatever result you have during testing will be what you have once the app is published.
On that basis we cannot guarantee the correct functionality if your current tests are not satisfactory. However, this issue is clearly a Google console setup ...
In the Android developer console, Can you check that you have the 'Licensing & in-ap billing' section completed with publick key (should be there automatically though)
.. as well as the correct test accounts?
I would also check that the APK 'product details' page is complete (including 'Consent' at the bottom of the page).
Similar Messages
-
InApp Error on Android: This version of the application is not configured for billing
Hi,
My App runs on Android. Free publications can download, but when I publish a folio to sell, it appears on the Android device and it gives the message: "This version of the application is not configured for billing"
I used the (long) app license code at the API section and pasted it into the android Public Key aria in the DPS Admin.
Then I logged out and logged in again.
Any Ideas what could be wrong?On google console check merchant account and see if all the bank and tax information settings are filled correctly.
-
Error while SO Invoice 'The Item Is Not Relevant For Billing'
Hi Colleagues,
I have created a Time and Material Project and when I am trying to Invoice the SO related to particular Project request getting below Error.
Errro Description :-
"The item is not relevant for billing"
Schedule Line Number 0044
Counter in Control Tables 00
Message Identification VF
System Message Number 044
Output Type I
Message Variable 01
Message Variable 02
Message Variable 03
Message Variable 04
Group Type F
Background :-
I created a Project
Entered the time sheet
Run CATS :- Transfer to Project system
Display actual cost line items
Run RRB and created billing request
In the time of Invoicing SO getting error.
I have checked all the configuration but unable to sort out the problem.
Please suggest me if I missed something or need to change the configuration.
Thanks in Advance
Regards
Manoj BansalHi Venu,
Thanks for you reply..
1. I have maintained Billing Relevance "C"
2. Copy Control Setting is sound good.
3. There is no billing block on SO.
4. We have CndType line item :- EKO2 and Billing Type :- 02.
Please let me know if any further setting is required.
Regards
Amitesh -
Message no. VF032 : The document is not relevant for billing
Hi,
I'm creating SO with 7 line item with using same item category type ZABC. I could able to do outbound delivery to all line item via VL01N. Then I wanted to perform billing via VF01, unlikely one of line item doesnt appear & getting error. Processing status shows as "incorrect".
Error:
No billing documents were generated. See log
Message no. VF032
Then I went VF01 --> Key-in SD Doc No. and Execute --> Edit (Menu-bar) --> Log to see the complete system error-log
Error Log
0080000050 000000 The document is not relevant for billing
Technical data
Tech. data details
Client 888
Group Number
Sales Document Number 0080000050
Item Number of the SD Document 000000
Schedule Line Number 0016
Counter in Control Tables 00
Message Identification VF
System Message Number 016
Output Type I
Message Variable 01
Message Variable 02
Message Variable 03
Message Variable 04
Group Type F
Can anyone help me out. TQ
rgds,
nemaDear Yadav,
scenario 1
SO : 65
MID : 3100010480
item category : ZABC
- outbound delivery & billing done
scenario 2
SO : 66
MID : 3100120160
item category : ZABC
- outbound delivery done
- error : No billing documents were generated. See log
Message no. VF032
- error during billing creation via VF01
- SD document category - delivery & processing status - incorrect shows in billing
- billing - edit - log - 0080000050 000000 The document is not relevant for billing
Technical data
Tech. data details
Client 888
Group Number
Sales Document Number 0080000050
Item Number of the SD Document 000000
Schedule Line Number 0016
Counter in Control Tables 00
Message Identification VF
System Message Number 016
Output Type I
Message Variable 01
Message Variable 02
Message Variable 03
Message Variable 04
Group Type F
*I'm wondering this may happen only this particular MID coz other MID able to generate billing. Plz guide me. TQ
rgds,
nema -
Hi friends.
Ive downloaded the free trial version of Final cut pro x and its not working, an error message comes up saying: You can't use this version of the application ''final cut pro trial'' with this version of OS X You have OS X 10.8.5. it requires 10.9 or later, please can anyone Help.Just download Mavericks (10.9) its free and installed it (Mac App Store)
-
How do you solve error "You can't use this version of the application Install Mac OS X.app with this version of Mac OS X" when trying to go back to leopard from lion?
Local Mac shop said to hold down "c" after inserting disk to get "disk utility" to come up in order to wipe hard drive. I can't seem to get it to do this.This W7 was purchased for using Fusion, as others did - per reviews from amazon. The technician today called their contact at VMWare - Fusion not officially for use with Lion - even though I read at the VMWare support site that others have made it work. Apparently my setup doesn't work.
Do you know how to do the proceedure for bringing up the disk utility when starting the disk?
BTW, some of the windows applications I want to continue using are Incredimail, Calendarscope, Stamps.com and a few others I have used over many years. What do you use for email and calendar?
Wow, sounds like another reason to not use MS Windows.
Regarding your Disk Utility question, please elablorate I'm not sure what you're trying to do. Disk Utilty is just that...a utility, it's something most users never have to use especially on a new computer. Let me know what you're trying to do there before I give you some instructions.
As for as your Windows apps I would recommend using Mail and iCal, both come as part of OS X and are very robust tools. Don't discount the software built right into OS X it's very robust and powerful not all like the bloatware most Windows boxes ship with. Stamps.com well I'd look for another alternative. It's clear they don't support OS X which makes me a little suspicious that they're so behind the times.
Also if you have not been exposed to these links before I'd strongly recommend bookmarking them and using them. They're extermely useful!
Switch 101
Mac 101
Find Out How Video tutorials -
Reinstalled software - error message file too new to support this version of the application
program was not rendering files in the timeline so i reinstalled the program.
reinstalled software, tried to open project i was working on and error message read: file to new to support this version of the application.
reading the maunual in advance, had recommended updating software prior to installing the program....
what to do??? need to continue working on the project...You can't get it to upgrade to 4.01 (the latest/last version)?
Should be doable through Software Update, unless you have either moved or renamed the FCE app from its original installed position.
Also try using disk utility to fix permissions on your system drive and try the update again.
Often times when you re-install the software there are legacy files left over from the previous installation. this might be the problem.
Consider downloading FCS remover (free) from Digital Rebellion:
http://www.digitalrebellion.com/fcsremover/
and the re-installing your FCE software from disc and then trying the update.
MtD -
After installing Yosmite, The following message is stopping me accessing my disk utility. 'You can't use this version of the application “Disk Utility” with this version of OS X.' you have “Disk Utility” 12.1.1.
not only that my Mac pro keeps dropping my internet connection and logs on to BT Open.
HelpFor whatever reason you don't have the Yosemite version of Disk Utility which is 13. I suggest you reinstall Yosemite.
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Download and install the 10.10.1 update.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Check that you have the current version of Disk Utility. -
File's format is too new for this version of the application
A project that was edited in FCE on an iMac will not open in FCE on a MacBook Pro. When I try to open it, I receive the error: File's format is too new for this version of the application.
The FCE that was installed on the MacBook Pro is exactly same copy as the one loaded onto the above mentioned iMac -- they were each were installed from the same, Apple Store purchased disk.
Thanks for any help.
-MikeHi(Bonjour)!
Did you apply the FCE 4.0.1 update on both machines?
Michel Boissonneault -
When I try to open iPhoto (9.2.1) it says 'You can't use this version of the application iPhoto with this version of OS X. All my photos are on there. Please help. Thank you.
Did you upgrade to a new MacOS X version? Then you need to update iPhoto as well.
Only iPhoto 9.6 is compatible with MacOS X 10.10 Yosemite. Update from the Mac App Store.
Backup your iPhoto library, if you do not have a current backup.
Launch the App Store, click the "Store" menu, and sign in with your current AppleID.
Check the "Updates" tab of the App Store for an iPhoto update and run the update.
When you laugh iPhoto after the update, it will warn you, that the library needs upgrading, That may take a while.
Just in case that you see a warning, that the update is not possible because of an error message: "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled."
Uninstall iPhoto by deleting it from the Applications folder, but do not empty the Trash, so you can put iPhoto back, if need be.
Launch the App Store, click the "Store" menu, and sign in with your current AppleID.
Open the main page "Featured" of the App Store and search for iPhoto.
If iPhoto is listed as "Free", click the "Free" button to buy it with your current AppleID.
If it is not showing as free, there is no help but contacting the App Store Support to sort out the AppleID. Use this link: http://www.apple.com/support/mac/app-store/contact/ -
I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries).
Thank you for your help! - I did try looking for all available specs about Keynote on the Apple iTunes website, and found nothing that could help me. HELP!1
Close all iWork applications
2
Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
3
empty the trash
4
shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
5
Reinstall Keynote by logging into the Mac App Store using download / install -
"You cannot use this version of the application Mail with this version...
I recently needed to replace my hard drive and now when I try to open the Mail application I get the following message: "You cannot use this version of the application Mail with this version of Mac OS X."
Any help is appreciated.ANSWERING MY OWN POST:
I have tried reinstalling Mail from my Snow Leopard upgrade disk directly and tried it using Pacifist. Neither worked because both simply reinstalled version 4.0. Fortunately, I have a MacBook Pro and it has version 4.1. I copied this directly, which was not ideal (it was quite confused about my mailboxes), but it worked.
The problem is that +Software Update+ did not detect the old version of Mail and Apple does not provide a direct way (that I could find) of downloading the latest version. Each time I downloaded Mail from Apple, it was version 4.0. -
I have just updated to OS X 10.9 and now find that I can't open Aperture to access photos etc, message reads : You can't use this version of the application "Aperture" with this version of OS X. You have "Aperture" 3.2.3... whichj is not a lot of help, i have limited technical ability and all i need to know is how to get Aperture to work again...help !
Software Update?
-
I downloaded the OS X version 10.9 and my Iphoto version 9.2.3 will not open. I get a message that I can't use this version of the application I photo with this version of OS X. How do I upgrade to a i photo that will run on 10.9. Do I purchase a new program or can I do just an download?
Check the "Purchases" page in the Mac App Store and see if there is a more recent version there already waiting for you.
-
Hello-
I have an air application that is distributed via CDROM, the app is signed by a code signing certificate and timestamped. In mid-August when my certicate expired my users started calling stating that they couldn't install our product due to the following error: "Sorry, an error has occured. The application could not be installed because the AIR file is damaged. Try obtaining a new AIR file from the application author." From my understanding a timestamped application is taken at a point in time when it's generated so why would it matter if the certificate was still valid? I have since replaced the certificate and will need to redistribute to my (thousands of) users however when I test it out using a future date and time the same error occurs. Any information to help resolve this would be grately appreciated.my command:
C:\Users\HOME USE\Desktop\AIR Development\HelloWorld>adl
application.xml
C:\Users\HOME USE\Desktop\AIR Development\HelloWorld>adt
-certificate -cn HelloW
orld 1024-RSA certHelloWorld.pfx password
C:\Users\HOME USE\Desktop\AIR Development\HelloWorld>adt
-package -storetype pkc
s12 -keystore certHelloWorld.pfx HelloWorld.air
application.xml HelloWorld.html
password: password
C:\Users\HOME USE\Desktop\AIR Development\HelloWorld>
And here is another link to download my code
http://www.megaupload.com/?d=JS3X2IVC
Thank you.
Maybe you are looking for
-
Outbound Proxy - No XML message seen !!!!!!!!!!
Hi All I am trying to use outbound ABAP proxy from an R/3 system . I have written a Z program to triger the execute_asynchronous method of the proxy generated. Now when i go to see the SXMB_MONI txn to see any XML message flow i dont see anything .
-
Is Ardence RTX required when I use PCI-7831R with labview real-time module for RTX target
I am new in the labview real-time field. I want to use labview real-time module for RTX target on only one desktop. My card is PCI-78331R. Is Ardence RTX necessary? Why I cannot find my card in the MAX after I configured the RTX? Thank you very much
-
Stock Transfer, Between Plants
Dear friends, MM guys are tramsfering finished goods from one profit center to another (plant to plant). in this case the price diffrence amount is posting to Dummy profit center but stock at actual cost is posting to currect profit center. my questi
-
HT2188 How to find the software version in my unlock iphone 4?
How to find the software version in my unlock iphone 4?
-
Video Card is broken HP Pavillion g6 1320ed
Hello, more that Two years ago I bought the laptop and one day the laptop couldnt start any more and only blinked next to caps lock in three times iteration. Was suspected Memory card but then once taken to a lab was determined that the Video card i