Error to Print Form Appraisal

Hi,
I need help to solve a problem. When I try to print an appraisal form, through PHAP_ADMIN_PA transaction, I get the following error:
Error when printing: INTERNAL ERROR
Message no. HRHAP00_DOCUMENT160
Can anyone help me, please?
Thanks in advance for any help.

Hello Nuno,
If you have defined in the layout of your templates to use the standard print layout. However this has changed with ECC 600 from Smartform to PDF. That means that the setting 'STANDARD' in your templates will result in trying to run PDF instead of Smartform as the print layout in ECC 600.
Changing the setting in the system to 'SMARTFORM' may solves the issue. Also, you can read the SAP note 1169947.
Cheers,
Jaime

Similar Messages

Error when printing reports from forms in Linux

Im having an error when printing a report from a form. The problem is, only with certain forms. when printing a report (to PDF) from other forms, it prints with no problems. The oracle is 10g AS and operating system is Redhat AS 3.
The error, in the log from the reports server is:
[2004/9/7 7:14:59:599] Exception 62204 (): Internal error writing the image BandCombine: a row of the matrix does not have the correct number o
f entries, should be OpImage.getExpandedNumBands(source0.getSampleModel(), source0.getColorModel()) + 1..
exception oracle.reports.RWException {
oracle.reports.RWError[] errorChain={struct oracle.reports.RWError {
int errorCode=62204,
java.lang.String errorString="Internal error writing the image BandCombine: a row of the matrix does not have the correct number of entries, sh
ould be OpImage.getExpandedNumBands(source0.getSampleModel(), source0.getColorModel()) + 1..",
java.lang.String moduleName="REP"
at oracle.reports.utility.Utility.newRWException(Utility.java:604)
at oracle.reports.toolkit.image.writer.JPEGImageWriter.writeImage(JPEGImageWriter.java:130)
at oracle.reports.toolkit.image.ImageManager.writeJPEGImage(ImageManager.java:524)
at oracle.reports.engine.EngineImpl.CRunReport(Native Method)
at oracle.reports.engine.EngineImpl.run(EngineImpl.java:353)
at oracle.reports.engine.EngineClassPOATie.run(EngineClassPOATie.java:84)
at oracle.reports.engine.EngineClassPOA._invoke(EngineClassPOA.java:117)
at oracle.reports.engine.EngineClassPOA._invoke(EngineClassPOA.java:62)
at com.inprise.vbroker.poa.POAImpl.invoke(POAImpl.java:2355)
at com.inprise.vbroker.poa.ActivationRecord.invoke(ActivationRecord.java:104)
at com.inprise.vbroker.GIOP.GiopProtocolAdapter.doRequest(GiopProtocolAdapter.java:492)
at com.inprise.vbroker.IIOP.ServerProtocolAdapter.doRequest(ServerProtocolAdapter.java:64)
at com.inprise.vbroker.GIOP.GiopProtocolAdapter.dispatchMessage(GiopProtocolAdapter.java:653)
at com.inprise.vbroker.orb.TPDispatcherImpl$TPDispatcher.run(TPDispatcherImpl.java:99)
at com.inprise.vbroker.orb.ThreadPool$PoolWorker.run(ThreadPool.java:76)
[2004/9/7 7:14:59:599] Error 50103 (C Engine): 19:14:59 ERR REP-0069: Internal error
REP-62204: Internal error writing the image BandCombine: a row of the matrix does not have the correct number of entries, should be OpImage.get
ExpandedNumBands(source0.getSampleModel(), source0.getColorModel()) + 1..
[2004/9/7 7:14:59:600] Error 50103 (C Engine): Error Writing Image, ID 2
[2004/9/7 7:14:59:601] Error 50103 (rwtic:rwticga): Look up for image attributes for image 2
[2004/9/7 7:14:59:602] Error 50103 (rwtic:rwticgi): Looking up for Image, ID 2 in the cache
[2004/9/7 7:14:59:603] Error 50103 (rwtic:rwticgi): Loading the Image into the cache
[2004/9/7 7:14:59:603] Debug 50103 (ImageManager:getImageSource): Retrieving the Image object for ID : 2
[2004/9/7 7:14:59:603] Error 50103 (rwtic:rwticgi): Image successfully loaded into the cache
[2004/9/7 7:14:59:604] Debug 50103 (ImageSource:getImageHeight ): Start Height : 155
[2004/9/7 7:14:59:604] Debug 50103 (ImageSource:getImageWidth ): Start : width : 138
[2004/9/7 7:14:59:604] Debug 50103 (ImageSource:getImageColorSpace ): Start
[2004/9/7 7:14:59:608] Exception 50125 (): Caught exception: java.lang.NullPointerException
exception oracle.reports.RWException {
oracle.reports.RWError[] errorChain={struct oracle.reports.RWError {
int errorCode=50125,
If anyone could help me, is important !
Thx in advance
Bruno Santos

Raise a TAR I reckon

Text Object Error in Pdf based print forms

Hello Friends,
I am trying to include a text object in Adobe PDF-based print form.
In the context, I have created a node for the text. I chose the Text Type as Include Text. I am able to choose the required Text Object and Text ID from the respective search helps. When trying to activate the form, I am getting an error saying that I did not specify a text name. I tried to rectify this error but could not do so.
Please help me out on how to rectify this error.
Points will be rewarded for useful answers.
Thanks,
John.

There is no need of activation for standard text... save will do...
Also note: standard text is client dependent... you need to attach to your transport request manually to move between clients...
Close the thread once your question is answered.
Regards,
Sairam

An error occurred as form "ZSF_LE_PASS_EMP_COPY" was printed

hi All,
one user is getting following error when he executes LECI and ZLECI while there is not showing any authorization object in SU53
An error occurred as form "ZSF_LE_PASS_EMP_COPY" was printed
Message no. LECI038
Diagnosis
Form "ZSF_LE_PASS_EMP_COPY" cannot be printed because of an error.
Procedure
Inform your system administrator.
Procedure for System Administration
Check the "ZSF_LE_PASS_EMP_COPY" form and correct any errors. Then reactivate form "ZSF_LE_PASS_EMP_COPY".
Check for graphics inserted in the system.
when i discussed this issue with ABAPER then he said that user is getting this issue due to missing authorization. if there is missing authorizations then why these authorization are not showing in SU53.
your guidance is required?
Regards,
majamil

Hi M
In that case you have to check the Spool server or Host spool server?
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/78/4d22426adddf2ce10000000a1550b0/content.htm
and you may need to check you system kernel and Patch levels based on you business requirements
Regards
S

Error in printing pdf based forms

Hi friends,
Error in printing pdf based forms
When we are trying to print pdf based forms.we get below error
Cannot find PDL type for output device frontend printer
Call contained error(s): ADS(2)
Message No: FPRUNX003
Thanks in advance.
Please help

Hi,
launch following in INTERNET explorer.
http://sapjavahost:50<instance_nr>0
where sapjavahost = hostname of you SAP java stack host
<instance_nr> = instance number of Java system
this open sap j2ee engine start page.
click on system information, login with administrator user and password
under Software Components you will find version and patch level.
regards,
kaushal

Adobe Livecycle Form Printing Error for One Form

Only for this particular form, I am receiving the following error; all other forms are printing fine. Please assist us in understanding the error? <Sep 16, 2008 2:26:16 PM EDT> <Info> <WebService> <BEA-220024> <Handler weblogic.webservice.core.handler.InvokeHandler threw an exception from its handleRequest method. The exception was: javax.xml.rpc.JAXRPCException: weblogic.webservice.TargetInvocationException: Failed to invoke the target:com.adobe.formServer.ws.AdobeFSServiceImpl@1cf630a operation name:XMLGetForm method:public java.lang.String com.adobe.formServer.ws.AdobeFSServiceImpl.XMLGetForm(java.lang.String) throws java.rmi.RemoteException exception:java.rmi.RemoteException: com.adobe.formServer.interfaces.FormServerException: java.util.MissingResourceException: Can't find bundle for base name com.adobe.formServer.fsLogging, locale en_US; nested exception is: com.adobe.formServer.interfaces.RenderFormException: com.adobe.formServer.interfaces.FormServerException: java.util.MissingResourceException: Can't find bundle for base name com.adobe.formServer.fsLogging, locale en_US; nested exception is: java.rmi.RemoteException: com.adobe.formServer.interfaces.FormServerException: java.util.MissingResourceException: Can't find bundle for base name com.adobe.formServer.fsLogging, locale en_US; nested exception is: com.adobe.formServer.interfaces.RenderFormException: com.adobe.formServer.interfaces.FormServerException: java.util.MissingResourceException: Can't find bundle for base name com.adobe.formServer.fsLogging, locale en_US.>

Hi Donna,
the plug-in you are referring to is, as you correctly state, an Adobe plug-in for Adobe's LiveCycle product family.
The ISR integration of Interactive Forms in SAP is based on Adobe components in Interactive Forms (Designer and ADS) that are 'related' to LiveCycle, but in essence a separate development for SAP. In addition, the ISR integration was built on top of the originally implemented integration on both the ABAP and Java side.
Within NetWeaver, there is no support for using Adobe plug-ins for forms development in .NET. This would be something that Adobe might be able to assist you with, but I assume that this would be a professional service by Adobe.
Kind regards,
Markus Meisl
SAP NetWeaver Product Management

Error while printing smart form..

Hi all,
I am getting an error while printing the invoice(smartform)
"Error in spool C call: Error from TemSe..."
it gives one pop also saying... Work process restarted; Session terminated.
How to solve it?
Thanks,
Darshana

Hi,
Please refer to this link might help you.
http://help.sap.com/saphelp_45b/helpdata/en/d9/4a8f9c51ea11d189570000e829fbbd/frameset.htm

Error while generating form 16 in portal - Screen output without connection

Dear Gurus,
We are facing error while generating form 16 through portal and getting the below error in portal.
Screen output without connection to user. error key: RFC_ERROR_SYSTEM_FAILURE
When we checked for dumps in R/3 the following dump is coming:
DYNPRO_SEND_IN_BACKGROUND with error message :
Message class : FPRUNX
Message number: 102: No job started.
Then we tried to execute the form 16 through R/3 itself using tcode PC00_M40_F16 after putting in the relevant values in the selection screen and then press on PRINT FORM button, but surprisingly the system logs out without giving any error or dump.
We tried doing it repeatedly and once in these attempts we got an error saying Initialization of font server module failed.
We are not getting clue as to why this is happening. <<Text removed>>
Regards
Edited by: Matt on Jul 27, 2011 9:50 AM

Dear,
This might be the problem of Adobe Acrobat Reader. what is the version of Adobe you are using ?? If it 9.0, then uninstall it and reinstall 8.0 and then check .
Could you please check your installed SAPGUI component? If component 'Engineering Client Viewer' is installed, please uninstall
it. And try to call same transaction again.
BR, Deepak

MDG- Material CR PDF print form

Hello Friends,
I am facing a problem while printing adobe forms. I searched the forums before posting but none of the discussions were satisfying.
My issue is as below:
I am getting an error while printing material CR's, the form gets called from WDA portal.The strange problem is this error happens only while printing certain materials CR ( for few materials it prints fine )
Error Message:
“com.adobe.ProcessingException: com.adobe.ProcessingException: 0 : InvalidDataException: Xml parsing error: not well-formed (invalid token) (error code 4), line 24, column 272 of file”
“Processing exception during a "Render" operation.#Request start time: Thu Nov 21 05:09:06 GMT 2013#com.adobe.ProcessingException: com.adobe.ProcessingException: 0 : InvalidDataException: Xml parsing error: not well-formed (invalid token) (error code 4), l”
Please find attached the image for reference.
Regards
Kesav

Dear Kesav,
I can't say 100%. I haven't done Adobe forms for long months. But I think I know what that could be.
One of the things I used to hate about the forms is the fact that it is an integration of two completely different technologies (ABAP and Adobe) and that means that the "alien" technology does not support everything we are used to. Namely the "syntax check" in this case.
In your case it is probably the fact that your interface structure and your form layout don't match. That often happens when multiple people work on the same thing or when you change your interface and forget to change the form. The system then goes and tries to put the table data into a date time field or something crazy/ incompatible like that.
The problem with this error is that it does not tell you where to go looking. You will have to check the whole form against the interface and look for anything suspicious. This error does not come from ABAP, it comes from the Adobe site, so there is nothing you can do outside of the Livecycle designer to fix this AFAIK.
I would love to help you more, but there is no trace or log you can send for me to get more information. You must find it, fix it, then use the versioning of your objects (that saved my *** several times) and be more disciplined (with your team).
May you don't feel too much pain looking for the problem
cheers Otto

Error while printing RG1 register

Dear All,
the following error is cuming while printing excise register J2I6 -register RG1
"SAP script layout not maintained for company code XXXX - register RG1"
But same I have configured in
SPRO/Tax on Goods Movement/India/Business Transaction/Excise Register/Specify SAPScript forms
Best Regards
Sainath

PowerPC Mac 10.4.11, Print with Safari with: Error while printing.
Others AP: Printer Setting Utility can't pop up, no effective.

REP-3002: Error initializing printer

Hello,
This is my configuraton:
Computer 1 : nt4, sp3, installed: Oracledatabase 7.3.4
Computer 2 : nt4, sp3, installed: Oracle WebDb, forms 6i, formserver 6i and reports 6i.
Services WebDb and Listener are running.
I've connected an HP LaserJet III to the parallel port of computer 2. In the printer
control panel of NT4, this printer is set as the 'default' printer.
'myform.fmx' is a simple form.
The code consists only of a 'when-button-pressed' trigger as follows:
declare
pl paramlist;Ln varchar(15) :='Elsa';
BEGIN
pl :=get_parameter_list(Ln);
if not id_null(pl) then destroy_parameter_list(pl);end if;
pl :=create_parameter_list('Elsa');
add_parameter(pl,'DESTYPE', text_parameter,'PRINTER');
run_product(REPORTS,'C:\ORANT\REPORT60\myrep.rep',1,BATCH,FILESYSTEM,pl);
destroy_parameter_list(pl);
END;
'myrep.rep' is a simple report, consisting of:
select user from dual;
generated by the wizard.
When I run the form in preview for the web in formbuilder 6i, then it works very well,
it prints my report.
But when I run it from the cgi 'ifcgi60.exe' by the command
start -> programs -> oracle forms 6i -> run a form on the web
it returns
http://pent2.easyware.be/dev60cgi/ifcgi60.exe?
form=myform.fmx&userid=&otherparams=useSDI=yes&
lookAndFeel=generic&colorScheme=teal
then the error returned in the webbrowser is
'REP-3002: Error initializing printer. Please make sure a printer is installed.'
if parameter 'DESTYPE' is set to 'SCREEN' then it works very well, I can print by clicking the print icon.
Please can someone help me.
Best Regards,
Carl Willems.
[email protected]

<BLOCKQUOTE>quote:<HR>Originally posted by aapmens ():
Hello,
This is my configuraton:
Computer 1 : nt4, sp3, installed: Oracledatabase 7.3.4
Computer 2 : nt4, sp3, installed: Oracle WebDb, forms 6i 6.0.8.8.0, formserver 6i and reports 6i 6.0.8.8.3.
Services WebDb and Listener are running.
I've connected an HP LaserJet III to the parallel port of computer 2. In the printer
control panel of NT4, this printer is set as the 'default' printer.
'myform.fmx' is a simple form.
The code consists only of a 'when-button-pressed' trigger as follows:
declare
pl paramlist;Ln varchar(15) :='Elsa';
BEGIN
pl :=get_parameter_list(Ln);
if not id_null(pl) then destroy_parameter_list(pl);end if;
pl :=create_parameter_list('Elsa');
add_parameter(pl,'DESTYPE', text_parameter,'PRINTER');
run_product(REPORTS,'C:\ORANT\REPORT60\myrep.rep',1,BATCH,FILESYSTEM,pl);
destroy_parameter_list(pl);
END;
'myrep.rep' is a simple report, consisting of:
select user from dual;
generated by the wizard.
When I run the form in preview for the web in formbuilder 6i, then it works very well,
it prints my report.
But when I run it from the cgi 'ifcgi60.exe' by the command
start -> programs -> oracle forms 6i -> run a form on the web
it returns
http://pent2.easyware.be/dev60cgi/ifcgi60.exe?
form=myform.fmx&userid=&otherparams=useSDI=yes&
lookAndFeel=generic&colorScheme=teal
then the error returned in the webbrowser is
'REP-3002: Error initializing printer. Please make sure a printer is installed.'
if parameter 'DESTYPE' is set to 'SCREEN' then it works very well, I can print by clicking the print icon.
Please can someone help me.
Best Regards,
Carl Willems.
[email protected]<HR></BLOCKQUOTE>
null

Installing and Configuring Adobe Document Services For Print Forms

Hi,
I want to use Adobe Document Services,for Print Forms Scenario,on ABAP side.
I installed the Adobe document Services following the steps in the Installation Guide.I obtained the Credentials file and supplied it during installation.
Then i followed the steps in the configuration Guide,except for the SSL connection part, as i have chosen Basic Authentication .
The Web Service is running and on opening the home page,when i test the method rpData,it asks for Username and password,when i supply my username password it says, user does not have rights to method rpData.
I even tried using J2ee Admin rights,user with SAP_ALL rights, and ADS_AGENT.
When i test the service from ABAP side,using the RFC destination i created on Client 400,from where i want to use it, the test shows status code OK.
When i test a form through transaction SFP,it asks for USERNAME and password,which i tried as my USERID,ADMIN ID with SAP_ALL rights, even with the users i created during Configuration like ADS_AGENT, ADSUser etc.
Our J2ee Engine is installed on Client 200,i installed the ADS on Client 200 and created the users ADS_AGENt(service user with role SAP_BC_FP_ICF) and ADSuser on Client 200.
I also activated the ICF services and created the destination for the destination service using Visual Administrator.
My Issues:
1)To test the Webservice,what USER ID password needs to be supplied?Do i need some Special role or rights?
2)During Configuration ,when i create a USer in SAP Web AS ABAP for Basic Authetication,after creating ADSCallers Role and assigning to ADSUSer ,in Visual Administrator,after selecting com.adobe/AdobeDocumentServices*AdobeDocumentServicesAssembly.jar ,under ADSCallers,i ama ble to see the both the users ADSUser(user in j2ee Engine for basic authentication ), and ADSUSER (user type system in ABAP),are visible,
When try to add ADSUSEr by choosing ADD,from USER Tree , it doesn't do so.So i Added the ADScallers group instead,thus indirectly both users added.Can this be a Problem?
3)What else do i need to do?Am i missing something?
Please help.
Regards,
Siddhartha

Hi all,
I am having an issue in which my ecc could not use properly the ADS on the EP.
I could properly execute FP_PDF_TEST_00 from se38 transaction which gives the correct version no of ADS. Also I am able to get the correct version no by giving username and password at http://<J2EE_host>:<J2EE_port>/AdobeDocumentServices/Config which seems like the ADS is working properly in EP.
However when the abaper is trying to run his form using spf like ZFORM_VENDOR it is showing error like
" Error during activation Message no. EU837 "
Can you please shed some light on what all steps I need to check to ensure that ADS is working properly ?

Adobe print form - Purchase order MEDRUCK_PO

Hi,
Today I tried to make use of the MEDRUCK_PO adobe print form.
This form is defined by SAP. They also updated the print program, which is SAPFM06P with entry ADOBE_ENTRY_NEU.
The first problem I encountered was that the print program didn't find the PDF function module name. In stead it was looking for the FM of the smartform. I did a modification to this part so now the logic looks first at the type (Smartform, PDF of SapScript). This works but now I get an update termination.
This error says that ULINE is not recognised.
Did someone already this? I thinks its impossible to have the ULINE statement in a PDF form?!
Thanks
Bert

Hi,
I have sorted my problem out. If you do not have transaction SAPLWMC you can use sm30 on view V_TNAPR.
Now I am getting error messages when SAP generates the FM for the form. It is complaining about currency fields that do not exist in the HEADER stucture of the interface. Specifically it is complaining about WRF_POTB_CURRENCY-OTB_CURR which is referred to as the currency key for a couple of other fields. The structure WRF_POTB_CURRENCY is included in the table EKKO and EKKO is included in the MMPUR_PRINT_EKKO which is used for the HEADER structure for the interface (both MEDRUCK and MEDRUCK_PDF). Any ideas how to fix this? I am probably going to have to create a new structure(s) to get this working.
Regards,
Dion

Text Object Error in Adobe forms

Hello Friends,
I am trying to include a text object in Adobe PDF-based print form.
In the context, I have created a node for the text. I chose the Text Type as Include Text. I am able to choose the required Text Object and Text ID from the respective search helps. When trying to activate the form, I am getting an error saying that I did not specify a text name. I tried to rectify this error but could not do so.
Please help me out on how to rectify this error.
Points will be rewarded for useful answers.
Thanks,
John.

Are you giving the text name in single quotes.

Issue in Print Form

Hi,
I have created a print form using Adobe LiveCycle designer 7.1 on SAP ECC 6.0 version. The requirement is to mask first 5 characters of a text field (SSN) on the form while displaying but when printed it should print whole SSN.I have used Javascript option to run at client. In the initialize event, I am changing the value(rawValue) to the masked one(for eg. XXXXX9999).In the prePrint event I am passing the correct value of SSN and again in the postPrint event I am changing the value of SSN to the masked one.The form type is set to Print form and Dynamic PDF.I have created a custom program in SAP to creae PDF and download on to the local machine.
Now the issue is...
1)When I opened the downloaded PDF and pressed the print button, the whole document goes blank. This is happening in Adobe Reader 7.0.9.
2) It works as expected with Adobe Reader 8.1.1 but when I close the document it gives error message like - instruction 0XX.. could not be written to memory.
I have also tried to hide to set the presence attribute to "visible" in prePrint event and to "invisible" in postPrint event instead of changing the value of the field but same issue is happening with Adobe Reader version 7.0.9.
I need this to work on any version(7.x or 8.x) of Adobe Reader. Please help.
Thanks,
Raghu

Dear,
print preview and physical printout are two different things.
PrintPreview:
The data stream will be sent to the frontend and rendered with windows-fonts etc (for backend prints a simulation).
Printout:
Frontend: You need a printer, that maps the character, you have to use SAPWIN or SAPWINCF when using cascading fonts. The rendering will be done in the windows spooler.
Backend: Your printer needs also a mapping (look like something with UTF8). Also the printer needs the fonts installed because the rendering will be done in the printer!
If you use the pdf-printer in SAP, you need to upload all necessary fonts (TTF) for the pdf-composer. Also you need a unicode pdf printer for that.
Regards,
Christian

Error to Print Form Appraisal

Similar Messages

Maybe you are looking for