Error upgrading to 2012 R2 - SQL Server Certificate problems

We are experiencing some strange errors during the installation of Config Mgr 2012 R2. The installer does not provide any errors, it just exits during the final steps. The c:\configmgrsetup.log file shows:
INFO: Testing SQL Server [SQL01.ad.edu] connection ... $$<Configuration Manager Setup><11-21-2013 13:47:25.427+360><thread=1984 (0x7C0)>
INFO: SQL Connection succeeded. Connection: SQL01.AD.EDU MASTER, Type: Unsecure $$<Configuration Manager Setup><11-21-2013 13:47:25.433+360><thread=1984 (0x7C0)>
INFO: Tested SQL Server [SQL01.ad.edu] connection successfully. Any preceding SQL connection errors may be safely ignored. $$<Configuration Manager Setup><11-21-2013 13:47:25.438+360><thread=1984 (0x7C0)>
INFO: Certificate: 3082022B38D<!Removed characters for readability!>C1D9C921A058D19F $$<Configuration Manager Setup><11-21-2013 13:47:25.443+360><thread=1984 (0x7C0)>
ERROR: Failed to open certificate store (HRESULT=0x5) $$<Configuration Manager Setup><11-21-2013 13:47:25.451+360><thread=1984 (0x7C0)>
Failed to write sql server certificate to store (TrustedPeople) on site server (SCCM.ad.edu). $$<Configuration Manager Setup><11-21-2013 13:47:25.457+360><thread=1984 (0x7C0)>
ERROR: Failed to configure SQL Server Certificate. $$<Configuration Manager Setup><11-21-2013 13:47:25.462+360><thread=1984 (0x7C0)>
Failed to create SQL Server Certificate, ConfigMgr installation cannot be completed. $$<Configuration Manager Setup><11-21-2013 13:47:25.468+360><thread=1984 (0x7C0)>
<11-21-2013 13:47:25> Failed to create process of SetupWpf.exe.
We are running SQL on our enterprise 2008R2 SQL server and SCCM runs on a dedicated 2012 Server. Certificates are generally signed by our CA but the SQL certificate for ConfigMgr is self signed and appears to be trusted by the SCCM server (it appears in
the TrustedPeople store). We have been running properly using HTTPS and the only errors prior to attempting the upgrade were with a secondary distribution point that had been removed prior to install. A new SQL certificate has been generated and tested but
yields the same error messages. All suggestions are appreciated. Thanks,
-Brandon

Hi,
I found a similar article for your reference.
Fail to create SQL Server Certificate" during installation
http://henkhoogendoorn.blogspot.nl/2013/01/fail-to-create-sql-server-certificate.html
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Difference between database features - SQL Server 2008 R2 navtive vs SQL Server 2012 with SQL Server 2008 compatibility set?

I am investigating the impact of upgrading from SQL Server 2008 R2 to SQL Server 2012. To reduce the impact of the upgrade, I am planning to restore / create our application database onto SQL Server 2012 with compatibility level 100 (SQL Server 2008 and
SQL Server 2008 R2).
Are there any differences in feature support for database running in native mode on SQL Server 2008 R2 vs a database installed on SQL Server 2012 with compatibility level 100 set?

Are there any differences in feature support for database running in native mode on SQL Server 2008 R2 vs a database installed on SQL Server 2012 with compatibility level 100 set?
Yes there can be difference and impact there are few features deprecated in SQL Server 2012 you must be aware about that. Please see
Deprecated Database Features in SQL Server 2012
Deprecated SQL Server features in SQL Server 2012
After you migrate database to 2012 please don't move ahead with production unless you have tested your application to new created database
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

An error occurred attempting to install SQL Server 2008 Express Service Pack 1

i have Setup application with complete prerequisite requirement package create from Visual Studio 2010 setup application.And yes this setup working fine in windows 7 and windows vista but not working in windows xp service pack 3.and getting error when install "An error occurred attempting to install SQL Server 2008 Express Service Pack 1"Give me solution as soon as possible.I have listed summery.txt and log.txt. please refer it.Summery.txt
===============================================================Component SQL Server 2008 Express has failed to install with the
following error message:
"An error occurred attempting to install SQL Server
2008 Express Service Pack 1."
The following components were successfully
installed:
- Microsoft .NET Framework 4 Client Profile (x86 and
x64)
The following components failed to install:
- SQL Server 2008
Express
See the setup log file located at
'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\install.log' for more
information.Install.log
==========================================================================The following properties have been set:
Property: [AdminUser]
= true {boolean}
Property: [InstallMode] = HomeSite {string}
Property:
[ProcessorArchitecture] = Intel {string}
Property: [VersionNT] = 5.1.3
{version}
Running checks for package 'Windows Installer 3.1', phase
BuildList
The following properties have been set for package 'Windows
Installer 3.1':
Running checks for command
'WindowsInstaller3_1\WindowsInstaller-KB893803-v2-x86.exe'
Result of running
operator 'VersionGreaterThanOrEqualTo' on property 'VersionMsi' and value '3.1':
true
Result of checks for command
'WindowsInstaller3_1\WindowsInstaller-KB893803-v2-x86.exe' is
'Bypass'
'Windows Installer 3.1' RunCheck result: No Install
Needed
Running checks for package 'Microsoft .NET Framework 4 Client Profile
(x86 and x64)', phase BuildList
Reading value 'Version' of registry key
'HKLM\Software\Microsoft\NET Framework Setup\NDP\v4\Client'
Unable to read
registry value
Not setting value for property
'DotNet40Client_TargetVersion'
The following properties have been set for
package 'Microsoft .NET Framework 4 Client Profile (x86 and x64)':
Running
checks for command 'DotNetFX40Client\dotNetFx40_Client_x86_x64.exe'
Result of
running operator 'ValueEqualTo' on property 'InstallMode' and value 'HomeSite':
true
Result of checks for command
'DotNetFX40Client\dotNetFx40_Client_x86_x64.exe' is 'Bypass'
Running checks
for command 'DotNetFX40Client\dotNetFx40_Client_setup.exe'
Result of running
operator 'ValueNotEqualTo' on property 'InstallMode' and value 'HomeSite':
false
Skipping ByPassIf because Property 'DotNet40Client_TargetVersion' was
not defined
Result of running operator 'ValueEqualTo' on property 'AdminUser'
and value 'false': false
Result of running operator 'VersionLessThan' on
property 'VersionNT' and value '5.1.2': false
Result of running operator
'ValueEqualTo' on property 'ProcessorArchitecture' and value 'IA64':
false
Result of checks for command
'DotNetFX40Client\dotNetFx40_Client_setup.exe' is 'Install'
'Microsoft .NET
Framework 4 Client Profile (x86 and x64)' RunCheck result: Install
Needed
Running checks for package 'SQL Server 2008 Express', phase
BuildList
Running external check with command
'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\SqlExpress2008\SqlExpressChk.exe' and
parameters '10.0.1600 1033'
Process exited with code 2
Setting value '2
{int}' for property 'SQLExpressChk'
The following properties have been set
for package 'SQL Server 2008 Express':
Property: [SQLExpressChk] = 2
{int}
Running checks for command
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE'
Result of running operator
'ValueNotExists' on property 'VersionNT': false
Result of running operator
'VersionLessThan' on property 'VersionNT' and value '5.1.2': false
Result of
running operator 'VersionEqualTo' on property 'VersionNT' and value '5.2.0':
false
Result of running operator 'VersionEqualTo' on property 'VersionNT' and
value '5.2.1': false
Result of running operator 'ValueEqualTo' on property
'AdminUser' and value 'false': false
Result of running operator
'ValueEqualTo' on property 'SQLExpressChk' and value '-1': false
Result of
running operator 'ValueEqualTo' on property 'SQLExpressChk' and value '-2':
false
Result of running operator 'ValueEqualTo' on property 'SQLExpressChk'
and value '-3': false
Result of running operator 'ValueEqualTo' on property
'SQLExpressChk' and value '-4': false
Result of running operator
'ValueLessThan' on property 'SQLExpressChk' and value '-4': false
Result of
running operator 'ValueNotEqualTo' on property 'ProcessorArchitecture' and value
'Intel': false
Result of running operator 'ValueNotEqualTo' on property
'SQLExpressChk' and value '1': true
Result of checks for command
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE' is 'Bypass'
Running checks for command
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE'
Result of running operator
'ValueNotEqualTo' on property 'ProcessorArchitecture' and value 'Intel':
false
Result of running operator 'ValueNotEqualTo' on property
'SQLExpressChk' and value '2': false
Result of checks for command
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE' is 'Install'
Running checks for
command 'SqlExpress2008\SQLEXPR_x64_ENU.EXE'
Result of running operator
'ValueNotEqualTo' on property 'ProcessorArchitecture' and value 'amd64':
true
Result of checks for command 'SqlExpress2008\SQLEXPR_x64_ENU.EXE' is
'Bypass'
Running checks for command
'SqlExpress2008\SQLEXPR_x64_ENU.EXE'
Result of running operator
'ValueNotEqualTo' on property 'ProcessorArchitecture' and value 'amd64':
true
Result of checks for command 'SqlExpress2008\SQLEXPR_x64_ENU.EXE' is
'Bypass'
'SQL Server 2008 Express' RunCheck result: Install Needed
EULA
for components 'Microsoft .NET Framework 4 Client Profile (x86 and x64)' was
accepted.
EULA for components 'SQL Server 2008 Express' was
accepted.
Copying files to temporary directory
"C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\"
Downloading files to
"C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\"
(11/15/2014 3:59:51 PM)
Downloading 'DotNetFX40Client\dotNetFx40_Client_setup.exe' from 'http://go.microsoft.com/fwlink/?linkid=182804'
to 'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\'
Download completed at
11/15/2014 3:59:53 PM
Verifying file integrity of
C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\DotNetFX40Client\dotNetFx40_Client_setup.exe
WinVerifyTrust
returned 0
File trusted
(11/15/2014 3:59:53 PM) Downloading
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE' from 'http://go.microsoft.com/fwlink/?LinkID=153228&clcid=0x409'
to 'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\'
Download completed at
11/15/2014 4:00:22 PM
Verifying file integrity of
C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\SqlExpress2008\SQLEXPR32_x86_ENU.EXE
WinVerifyTrust
returned 0
File trusted
Running checks for package 'Microsoft .NET
Framework 4 Client Profile (x86 and x64)', phase BeforePackage
Reading value
'Version' of registry key 'HKLM\Software\Microsoft\NET Framework
Setup\NDP\v4\Client'
Unable to read registry value
Not setting value for
property 'DotNet40Client_TargetVersion'
The following properties have been
set for package 'Microsoft .NET Framework 4 Client Profile (x86 and
x64)':
Running checks for command
'DotNetFX40Client\dotNetFx40_Client_setup.exe'
Result of running operator
'ValueNotEqualTo' on property 'InstallMode' and value 'HomeSite':
false
Skipping ByPassIf because Property 'DotNet40Client_TargetVersion' was
not defined
Result of running operator 'ValueEqualTo' on property 'AdminUser'
and value 'false': false
Result of running operator 'VersionLessThan' on
property 'VersionNT' and value '5.1.2': false
Result of running operator
'ValueEqualTo' on property 'ProcessorArchitecture' and value 'IA64':
false
Result of checks for command
'DotNetFX40Client\dotNetFx40_Client_setup.exe' is 'Install'
'Microsoft .NET
Framework 4 Client Profile (x86 and x64)' RunCheck result: Install
Needed
Verifying file integrity of
C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\DotNetFX40Client\dotNetFx40_Client_setup.exe
WinVerifyTrust
returned 0
File trusted
Installing using command
'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\DotNetFX40Client\dotNetFx40_Client_setup.exe'
and parameters ' /q /norestart /ChainingPackage ClientX64ClickOnce /lcid
1033'
Process exited with code 0
Running checks for package 'Microsoft
.NET Framework 4 Client Profile (x86 and x64)', phase AfterPackage
Reading
value 'Version' of registry key 'HKLM\Software\Microsoft\NET Framework
Setup\NDP\v4\Client'
Read string value '4.0.30319'
Setting value
'4.0.30319 {string}' for property 'DotNet40Client_TargetVersion'
The
following properties have been set for package 'Microsoft .NET Framework 4
Client Profile (x86 and x64)':
Property: [DotNet40Client_TargetVersion] =
4.0.30319 {string}
Running checks for command
'DotNetFX40Client\dotNetFx40_Client_setup.exe'
Result of running operator
'ValueNotEqualTo' on property 'InstallMode' and value 'HomeSite':
false
Result of running operator 'VersionGreaterThanOrEqualTo' on property
'DotNet40Client_TargetVersion' and value '4.0.30129': true
Result of checks
for command 'DotNetFX40Client\dotNetFx40_Client_setup.exe' is
'Bypass'
'Microsoft .NET Framework 4 Client Profile (x86 and x64)' RunCheck
result: Install Succeeded
Running checks for package 'SQL Server 2008
Express', phase BeforePackage
Running external check with command
'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\SqlExpress2008\SqlExpressChk.exe' and
parameters '10.0.1600 1033'
Process exited with code 2
Setting value '2
{int}' for property 'SQLExpressChk'
The following properties have been set
for package 'SQL Server 2008 Express':
Property: [SQLExpressChk] = 2
{int}
Running checks for command
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE'
Result of running operator
'ValueNotEqualTo' on property 'ProcessorArchitecture' and value 'Intel':
false
Result of running operator 'ValueNotEqualTo' on property
'SQLExpressChk' and value '2': false
Result of checks for command
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE' is 'Install'
'SQL Server 2008 Express'
RunCheck result: Install Needed
Verifying file integrity of
C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\SqlExpress2008\SQLEXPR32_x86_ENU.EXE
WinVerifyTrust
returned 0
File trusted
Installing using command
'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\SqlExpress2008\SQLEXPR32_x86_ENU.EXE'
and parameters '/q /hideconsole /action=Upgrade /instancename=SQLEXPRESS
/skiprules=RebootRequiredCheck'
Process exited with code
-2068578302
Status of package 'Microsoft .NET Framework 4 Client Profile (x86
and x64)' after install is 'InstallSucceeded'
Status of package 'SQL Server
2008 Express' after install is 'InstallFailed'
S S Manne

Hi Manne,
As your description, you come across an error when trying to install SQL Server 2008 express Service Pack 1 on windows XP Service Pack 3 machine. From your error log, I get the error(unable to read registry value). As my analysis, the issue could be due
to that your account doesn't have access to registry. Below are the recommendations for troubleshooting the issue.
1. Make sure that you log in as an administrator of the machine.
2. Please follow the steps below to make sure that you have granted the right permission to registry.
a. Located HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server in registry.
b. Right click and go to Permission, then you could see user accounts or groups. If your user account is not in the list, you could click Add to add your account there.
c. Select your account and Click on Advance.
d. Check on both check box ('Include inheritable permissions from this object's parent'.
and 'Replace all child object permissions with inheritable permissions from this object'), click OK.
e. Click OK again.
Regards,
Michelle Li

Install fails at "Generating public key and SQL Server certificate"

I'm attempting to install a Child Primary Site and am running into an issue.
Currently there is a CAS and another Child Primary Site already deployed and running fine.
I've re-installed the SQL instance for the Site I'm having an issue with as well as re-installed Server 2008 R2 for this site.
During install I'm getting the following:
Failed to retrieve SCCM-SQL.domain.local SQL Server SerializedEncodedCertificate. $$<Configuration Manager Setup><02-11-2014 08:47:54.180+480><thread=4572 (0x11DC)>
ERROR: Failed to read CAS SQL Server information, store CAS SQL Sever certificate or register connection to the CAS database. $$<Configuration Manager Setup><02-11-2014 08:47:54.180+480><thread=4572 (0x11DC)>
Invalid certificate $$<Configuration Manager Setup><02-11-2014 08:47:54.212+480><thread=4572 (0x11DC)>
WARNING: Failed to remove SCCM-SQL.domain.local SQL Server certificate from store (TrustedPeople) on site server (FS1.domain.local). $$<Configuration Manager Setup><02-11-2014 08:47:54.212+480><thread=4572 (0x11DC)>
The SQL instance has permissions added for the Computer account as well as the username that is being used to install the Site. Any leads on what is giving me this headache?

Yes, each instance is currently running SQL Server 2008 R2 10.50.2811. Also, they all are on the same collation of SQL_Latin1_General_CP1_Cl_AS.

A database error occurred. Source: Microsoft SQL Server Native Client 10.0 Code: 1205 occurred

Hi
i am getting these errors in sharepoint server event viewer, and when i see the sql server the log files disk is full memory only some mbs left out of 1 TB
Log Name:      Application
Source:        Microsoft-SharePoint Products-SharePoint Server Search
Date:          7/12/2014 9:56:04 PM
Event ID:      57
Task Category: Search service
Level:         Warning
Keywords:
User:          XYZ\svc-mc-sps3eServsear
Computer:      SPFIND01.xyz.gov.local
Description:
A database error occurred. Source: Microsoft SQL Server Native Client 10.0 Code: 1205 occurred 1 time(s) Description: Transaction (Process ID 193) was deadlocked on lock
resources with another process and has been chosen as the deadlock victim. Rerun the transaction.
Context: Application 'XYZSP_SearchApp'
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-SharePoint Products-SharePoint Server Search" Guid="{C8263AFE-83A5-448C-878C-1E5F5D1C4252}" />
    <EventID>57</EventID>
    <Version>14</Version>
    <Level>3</Level>
    <Task>136</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000000</Keywords>
    <TimeCreated SystemTime="2014-07-12T18:56:04.665684900Z" />
    <EventRecordID>225666</EventRecordID>
    <Correlation />
    <Execution ProcessID="3408" ThreadID="2932" />
    <Channel>Application</Channel>
    <Computer>SPFIND01.xyz.gov.local</Computer>
    <Security UserID="S-1-5-21-1537596049-1164153464-4201862467-47315" />
</System>
<EventData>
    <Data Name="string0">Microsoft SQL Server Native Client 10.0</Data>
    <Data Name="string1">1205</Data>
    <Data Name="string2">1</Data>
    <Data Name="string3">Transaction (Process ID 193) was deadlocked on lock resources with another process and has been chosen as the deadlock
victim. Rerun the transaction.</Data>
    <Data Name="string4">
Context: Application 'XYZSP_SearchApp'</Data>
</EventData>
</Event>
A database error occurred. Source: Microsoft SQL Server Native Client 10.0 Code: 9002 occurred 1 time(s) Description: The transaction log for database 'tempdb' is full due to 'ACTIVE_TRANSACTION'.
Context: Application 'XYZSP_SearchApp'
adil

If you've run out of disk space for your SQL databases then of course you'll get errors. Fix SQL then look to see if you're still getting errors.

Logon Error:[DBNETLIB][ConnectionOpen(Connect()).]SQL Server does not exist

Hi,
Getting following error while trying to connect MySQL server to the MDM Import manager.
logon Error:[DBNETLIB][ConnectionOpen(Connect()).]SQL Server does not exist or access denied
i have supplied the following paramter values.
Type : SQL server
Remote System : MDM
DBMS server : localhost
Database Name : testing
user: < MySQL user name>
password : < MySQL password>
pls let me know how can i solve this problem.
thanks

Refer the blog
/people/rupesh.kumar4/blog/2008/08/20/how-to-integrate-mdm-with-mysql-server-50
thanks
Rupesh

OLE DB or ODBC error: [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied

Hi,
I have one client and one server. In both hosts I created an OS-user named User1.
The user have been given various role under the prefix SQLServer2005.
The default instance of SQL Server and instance (background-process) of
Analysis Service are also run under User1.
I connected via Management Studio to Analysis Service directly in the
server. I set the permission to access Analysis Service to Everyone.
This means everyone should be able to use Analysis Service. I have set
ODBC data source to the server. Testing was successful.
I created a project to create a cube. The tables are fairly small (total 300 MB, biggest one 290).
On project setting (created at client) I set the server host as
deployment target. I managed to deploy project when all I have are Data
Source and Data Source Views.
But on deployment I always failed. The errors remain the same, begins with
OLE DB error: OLE DB or ODBC error: [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.; 08001.
I have tried 4 combinations of Impersonation :
(A) Use a specific username and password
* in which I supply User1 and the password of User1
(B) Use the service account
(C) Use the credentials of the current user
(D) Default
Why is this? The server does certainly exist. I think the error message is wrong.
I have seen 3 posting that seems related. One of them say the solution is giving the right impersonation, but gave no detail. About the privilege, User1 are granted the role of
SQLServer2005MSOLAP. What is the solution?
Thank you,
Bernaridho

I just had this problem and solved it by creating an alias in SQL Server Configuration Manager, as below:
Scenario: My SQL server is accessible from the internet under my.domain.com, and from itself at ServerName. But the local network can't see itself through the router at my.domain.com, so the deployed project is unable to process the cube, since that would
require Analysis Services to be able to see the SQL Server at my.domain.com, which it can't do.
So I changed the server in my project from my.domain.com to ServerName, and I created a local alias to ServerName in SQL Server Configuration Manager, under SQL Native Client 11.0 Configuration, Aliases. In my case, I pointed it to localhost port 1333, and
used SSH -L 1333:my.domain.com:1433, but I could have pointed the alias directly to the server, just as well. (Verifying... yes, that worked too, so you can forget SSH if you have no interest in it.)

It is compatible Obi 11g with Windows Server 2012 and Sql Server 2012?

Hi every
Please help with two questions.
1. - Obi 11g is supported on Windows Server 2012 and SQL Server 2012?
There a compatibility matrix which mention compatibility with versions 2012?
2. - is feasible to install Obi 11g in separate server and install weblogic on another server?
I appreciate the prompt response
Regards
Pedro

Hi Pedro,
As of November 2012 Compatibility Matrix released by Oracle for OBI 11.1.1.x Windows 2012 and SQL Server 2012 were not supported. It was supported on 2008 Windows and SQL Server.
We can have weblogic and OBI server's on 2 different machines. The approach is to opt software only install. the link below will give more details:
http://obieeelegant.blogspot.com/2012/07/obiee111160-software-only-installation.html
Let me know if this helped.
Regards,
Jay

Is it possible to transfer a database from SQL Server 2012 to SQL Server Express 2012?

Is it possible to transfer a database from SQL Server 2012 to
SQL Server Express 2012? Ideally I would like to backup the database from SQL Server 2012 and restore it on SQL Server Express 2012. Is that possible?

Is it possible to transfer a database from SQL Server 2012 to
SQL Server Express 2012? Ideally I would like to backup the database from SQL Server 2012 and restore it on SQL Server Express 2012. Is that possible?
Yes it is possible but database size should not be greater than 10 G as max databse size supported for Express 2012 is 10 G
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

How to install sp2 for sql server 2012 , where sql server 2012 instnce is installed in cluster mode

Hi Everyone,
I want to install sp2 for sql server 2012, My sql server 2012 instance is installed in cluster mode.
Please suggest the best practice to install sp2 , what are prerequisite and recommendation.
Please share installation guide for sp2 in cluster instance, if any one have.
Thanks All
Aditya

Did you searched a bit before posting question.
Please read
https://support.microsoft.com/kb/958734?wa=wsignin1.0
http://blogs.msdn.com/b/john_daskalakis/archive/2014/09/05/how-to-install-a-service-pack-at-a-sql-server-2012-failover-instance-best-practices.aspx
http://blogs.msdn.com/b/jason_howell/archive/2012/08/28/how-to-patch-sql-server-2012-setup-with-an-updated-setup-package-using-updatesource-to-get-a-smart-setup.aspx
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

Installing SSMS 2012 after SQL Server 2008 R2 Express was installed (without tools)

Hi everybody,
This is a question in another forum I am frequent. Someone installed SQL Server Express 2008 R2 and he used the wrong exe, so he installed it without tools. Now he wants to install SSMS.
It looks like SSMS 2012 wants to have SQL Server 2012 Express installed first.
Can someone please confirm if it's possible to install just SSMS 2012 after SQL Server 2008 R2 Express was already installed and if possible, guide through the installation steps?
Thanks a lot in advance.
For every expert, there is an equal and opposite expert. - Becker's Law
My blog
My TechNet articles

Hi Naomi,
Agree with Shanky.
I have tested the scenario you described. Everything works well, I successfully install SQL Server Management studio 2012 after SQL Server 2008 R2 Express (without tools) was already installed.
Please note that we don’t need to install SQL Server 2012 Express first when installing SSMS 2012. For detailed installation steps of SQL Server 2008 R2 Express and SSMS 2012, you can review below blogs.
How to Install SQL Server 2008 R2 (Express Edition)
SQL Server Management Studio – A step-by-step installation guide
In addition, we can use SSMS 2012 to manage SQL Server Express 2005 /2008 /2008 R2, the tool is backward compatible.
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.
Lydia Zhang
TechNet Community Support

BAM Deployment error - Microsoft.BizTalk.Bam.Management.BamManagerException: The BAM deployment failed. --- Microsoft.BizTalk.Bam.Management.BamManagerException: Encountered error while executing command on SQL Server "ServerName".

HI,
I am getting below error while deploying BAM activity ...Pls help me resolve this issue.
Microsoft.BizTalk.Bam.Management.BamManagerException: The BAM deployment failed. ---> Microsoft.BizTalk.Bam.Management.BamManagerException: Encountered error while executing command on SQL Server
"ServerName". ---> System.Data.SqlClient.SqlException: An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or
[] are not allowed. Change the alias to a valid name.An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed.
Change the alias to a valid name.An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias
to a valid name.An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An
object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column
name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column name is missing
or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column name is missing or empty. For
SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column name is missing or empty. For SELECT INTO statements,
verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column name is missing or empty. For SELECT INTO statements, verify each column
has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For
other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements,
look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock,
Boolean asyncClose) at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady) at
System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async, Int32 timeout, Boolean asyncWrite) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean
sendToPipe, Int32 timeout, Boolean asyncWrite) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at Microsoft.BizTalk.Bam.Management.SqlHelper.ExecuteBatches(String cmdText) at Microsoft.BizTalk.Bam.Management.SqlHelper.ExecuteNonQuery(String
cmdText, CommandType cmdType, Boolean inTransaction, Transaction transaction) --- End of inner exception stack trace --- at Microsoft.BizTalk.Bam.Management.SqlHelper.ExecuteNonQuery(String cmdText, CommandType cmdType, Boolean inTransaction,
Transaction transaction) at Microsoft.BizTalk.Bam.Management.ViewModule.Create(XmlDocument defXmlDoc) at Microsoft.BizTalk.Bam.Management.WorkerModule.DispatchOperation(OperationType operation, XmlDocument defXmlDoc) at
Microsoft.BizTalk.Bam.Management.BamManager.ProcessOneBamArtifactType(BamArtifactType bamArtifact, OperationType operation) at Microsoft.BizTalk.Bam.Management.BamManager.ManageInfrastructure(OperationType operation) at Microsoft.BizTalk.Bam.Management.BamManager.Deploy()
--- End of inner exception stack trace --- at Microsoft.BizTalk.Bam.Management.BamManager.Deploy() at Microsoft.BizTalk.Bam.Management.BamManagementUtility.BamManagementUtility.HandleDeployAll() at Microsoft.BizTalk.Bam.Management.BamManagementUtility.BamManagementUtility.DispatchCommand()
at Microsoft.BizTalk.Bam.Management.BamManagementUtility.BamManagementUtility.Run() at Microsoft.BizTalk.Bam.Management.BamManagementUtility.BamManagementUtility.Main(String[] args)

Your View Name, OLAP Cube Name and certain other restrictions listed @http://msdn.microsoft.com/en-us/library/aa561577.aspx
Please review your BAM Definitons.
Regards.

What is the difference between SQL Server 2012 R2 & SQL Server 2014

Hi all,
I am using SQL Server from last 3 years. I started SQL Server 2008 R2. Now I am using SQL Server 2012. I want to change my development environment to SQL Server 2012 R2. But suddenly I saw that SQL Server 2014 is released. I want to know what are the
differences between SQL Server 2012 R2 & SQL Server 2014. Are both those are the same or different products?
I searched through the Internet but I didn't find any article regarding that. So could someone help me to solve this matter?
Thanks,
Regards,
Chiranthaka

differences between SQL Server 2012 R2 & SQL Server 2014.
We don't have a Version "SQL Server 2012 R2", only 2005, 2008, 2008R2, 2012 and 2014.
See MSDN What's New in SQL Server 2014
Olaf Helper
[ Blog] [ Xing] [ MVP]

RE: Database (SQL-SERVER) access problem

Have you used NT Control Panel/ ODBC to set up the ODBC data source name?
You have to define the data source (database) SecTrade as well as the
driver to be used (SQL Server). This can be done by selecting the Add
button on the Data Sources screen in Control Panel/ ODBC.
Hope this helps.
Sanjay Murthi
Indus Consultancy Services, Inc.
From: Administrator
Sent: Wednesday, August 13, 1997 6:49 PM
To: "'[email protected]'"
Cc: murthis; thyagarajm; thyagarm; vasasm; chandraa
Subject: Database (SQL-SERVER) access problems
MCI Mail date/time: Mon Aug 11, 1997 10:28 pm EST
Source date/time: Mon, 11 Aug 1997 19:25:34 +0530
Hi Forte-Users,
We have a setup a Sql-Server database on a NT server. In the Forte
EConsole,
we have
setup a ODBC-type Resource for this server, named SERVER2_ODBC. This NT
server
is configured as a Client Node in the active Forte environment. Note
that
Server2 is not
the Forte server, but has Forte installed. There is another NT server
which
acts as the
Forte server. NODEMGR and Sql-Server are running on SERVER2.
In our application, we have a DBSession SO with the database source
as SERVER2_ODBC, Userid=ForteInstructor. When running the application,
Forte
throws an exception, the gist of it being as follows:
USER ERROR: (This error was converted)
Failed to connect to database: SecTrade, username: ForteInstructor.
[Microsoft][ODBC Driver Manager] Data source name not found and no
default
driver specified
We have tried
1) Installing ODBC drivers on the NT server (Server2)
2) Accessing local databases from Forte clients which works fine
3) Accessing the Sql-Server database through Isqlw (Sql-Server Client
s/w) -
It works.
Could someone suggest what we should try to get rid of this problem?
Thanks for any help,
Kishore Puvvada

Rajsarawat wrote:
Dear sir/mam,
I have installed sql server 2005 (server) and on another computer installed client. It installed successfully but on client side it does not seen, from where should i start it. so please send me procedure to install sql server 2005 on both side(client and server).You have to turn on network (external to your computer) access.
Under programs->sql server look for "surface"

I am getting an error message "Adobe_unable to download, license server communications problem, e_act_not_ready". I have downloaded Adobe Digital Editions and have authenticated the computer, but cannot download a book from the library. What should I do

I am getting an error message "Adobe_unable to download, license server communications problem, e_act_not_ready". I have downloaded Adobe Digital Editions and have authenticated the computer, but cannot download a book from the library. What should I do?

Having exact same problem, only it's with a book I've paid for, so it hurts more . Any ideas?

Error upgrading to 2012 R2 - SQL Server Certificate problems

Similar Messages

Maybe you are looking for