Error: USer request cancel of current operatin

Hi,
My database is in 10.2.0 and OS is Windows 2003. We are having some inhouse MIS reports. One report was running earlier without any error. But past few days I am getting the following error:
Can any one help me.
Microsoft OLE DB Provider for ODBC Drivers error '80040e31'
[Oracle][ODBC][Ora]ORA-01013: user requested cancel of current operation
/mis/procedures.asp, line 291
thankyou
satyanag

ORA-01013 user requested cancel of current operation
Cause: The user interrupted an Oracle operation by entering CTRL-C, Control-C, or another canceling operation. This forces the current operation to end. This is an informational message only.
Action: Continue with the next operation.
So it means that you need to check back with the application. If its coming from the MIS than check back what's happening in the file that is given in the error.
Aman....

Similar Messages

Hi, i am getting oracle error ora-01013 user requested cancel of current operation.

I know this is timeout error however my select query simply returns count from 2-3 tables.. any help would be appritiated, please help me.

Hi Ramin,
Thanks for reply. Below is the query i am running,
SELECT COUNT(TRN.TRANSACTIONID)
FROM TRANSACTIONDATA TRN,
CONTENTDATA CND,
ACTIVITY AC,
ACTIVINVOL AVL,
PARTY PR
WHERE TRN.T_ID=CND.T_ID
AND CND.CD=AC.CD
AND AC.AD=AVL.AD,
AND AVL.PRD=PR.PRD
AND PR.SPRI=42345
AND TRN.LUT > '16-JUN-2013'
AND UPPER(TRN.T_ID) LIKE 'ONE AND DONE COM%' ;
WHICH OCCURS ERROR ora-01013 user requested cancel of current operation.
THANKS
DESHMUKH

ORA-01013: User requested cancel of current operation (#1013)

Hi Guys,
I have an application and in particular an append query that inserts rows into a linked table. I keep on getting this error, (although the code works fine in enterprise manager, and code-imports ok).
I did not cancel the query but it seems to think it has. The insert/append query starts and prompts me for the username and password, this works fine, it just stops half way or beggining etc...
This is the error:
ORA-01013: User requested cancel of current operation (#1013)
And this is the error on Help file:
ODBC – call failed. (Error 3146)
Using an ODBC connection, you tried to perform an operation on data in an ODBC data source. This error may occur when the ODBC data source is on a network drive and you are not connected to the network. Make sure the network is available, and then try the operation again.
Cheers
Champinco

Does "linked table" imply that you're using Access as a front-end for Oracle? I know that Access sets a query timeout value when it works with ODBC connections and this error generally occurs when you have a query that exceeds that timeout. I don't know whether Access lets you adjust that timeout, but assuming you're using the Oracle ODBC driver, you should be able to disable query timeout in the DSN configuration.
Justin

CsDbUnableToStartTransaction() ORA-01013: user requested cancel of current

Hello Guru's,
We are getting this error once in a while(may be once in 20 check-in's). Please through some lights why this error occurs? Thanks in advance.
Error Log :
sscproducmap02.ph.rc: Event generated by user 'fmwadmin' at host 'xxxxxxxxxxxx:7151'. csDbUnableToStartTransaction() ORA-01013: user requested cancel of current operation
csDbUnableToStartTransaction() ORA-01013: user requested cancel of current operation
java.sql.SQLException: ORA-01013: user requested cancel of current operation [ Details ]
An error has occurred. The stack trace below shows more information.
!$sscproducmap02.ph.rc: !csUserEventMessage,fmwadmin,xxxxxxxxxxx:7151!$!csDbUnableToStartTransaction,!$ORA-01013: user requested cancel of current operation<br>!csDbUnableToStartTransaction,!$ORA-01013: user requested cancel of current operation<br>!syExceptionType2,java.sql.SQLException,ORA-01013: user requested cancel of current operation<br>
intradoc.common.ServiceException: !csDbUnableToStartTransaction,!$ORA-01013: user requested cancel of current operation
     at intradoc.data.WorkspaceTransactionWrapper.beginTransaction(WorkspaceTransactionWrapper.java:52)
     at intradoc.server.ServiceRequestImplementor.beginTransaction(ServiceRequestImplementor.java:285)
     at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1186)
     at intradoc.server.Service.doActions(Service.java:447)
     at intradoc.server.ServiceRequestImplementor.executeActions(ServiceRequestImplementor.java:1121)
     at intradoc.server.Service.executeActions(Service.java:433)
     at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:635)
     at intradoc.server.Service.doRequest(Service.java:1707)
     at intradoc.server.ServiceManager.processCommand(ServiceManager.java:359)
     at intradoc.server.IdcServerThread.run(IdcServerThread.java:197)
Caused by: intradoc.data.DataException: !csDbUnableToStartTransaction,!$ORA-01013: user requested cancel of current operation
     at intradoc.jdbc.JdbcWorkspace.handleSQLException(JdbcWorkspace.java:2371)
     at intradoc.jdbc.JdbcWorkspace.beginTranEx(JdbcWorkspace.java:1059)
     at intradoc.data.WorkspaceTransactionWrapper.beginTransaction(WorkspaceTransactionWrapper.java:47)
     ... 9 more
Caused by: java.sql.SQLException: ORA-01013: user requested cancel of current operation
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:331)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:288)
     at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:745)
     at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:210)
     at oracle.jdbc.driver.T4CStatement.executeForRows(T4CStatement.java:961)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1190)
     at oracle.jdbc.driver.OracleStatement.doScrollExecuteCommon(OracleStatement.java:4086)
     at oracle.jdbc.driver.OracleStatement.doScrollStmtExecuteQuery(OracleStatement.java:4234)
     at oracle.jdbc.driver.OracleStatement.executeUpdateInternal(OracleStatement.java:1661)
     at oracle.jdbc.driver.OracleStatement.executeUpdate(OracleStatement.java:1626)
     at intradoc.jdbc.JdbcWorkspace.beginTranEx(JdbcWorkspace.java:1038)
     ... 10 more

The ORA-01013 error is a database error. The error is thrown when an activity is cancelled by the requested user before it was completed.
In this case UCM is the application that is cancelling a database query/update/etc. UCM does this automatically if a database action takes
longer then a treshold value (I think by default it's 30 seconds, but I am not completely sure).
If you are suffering from ORA-01013 it might be good to contact your DBA and ask if there are any queries from your UCM application that
take a long time. Or trace the systemdatabase event and look for queries that take a long time.

Message: ORA-01013: user requested cancel of current operation

Hi,
I have been working an issue involving an application that is receiving "Message: ORA-01013: user requested cancel of current operation" errors. These errors are seen in the Application servers which are 6, w2k3 Standard sp2.
My problem is the users are not the ones requesting the cancel. I have worked with my application support dept and they have informed me the timeout settign is 2 seconds. As you can see in my list below these transactions are taking longer then 2 seconds. A good transaction should take less then 3ms.
Here is a short log of bad times this has occurred:
Duration
(in ms) Error Time
2226       2013-01-22 12:30:11.023
2006       2013-01-22 12:30:10.827
2833       2013-01-22 11:38:56.813
2026       2013-01-22 11:15:28.490
2026       2013-01-18 15:00:24.930
2990       2013-01-21 04:47:10.317
2026       2013-01-18 11:14:45.370
10910    2013-01-18 11:14:33.673
2026       2013-01-18 11:08:39.970
2140       2013-01-18 11:08:33.310
2140       2013-01-18 11:08:31.620
2230       2013-01-18 11:08:30.330
2130       2013-01-18 11:08:25.737
3506       2013-01-18 09:00:15.453
4390     2013-01-17 11:44:55.243
9793     2013-01-17 11:44:55.233
6216     2013-01-17 11:44:54.317
4800     2013-01-17 11:44:54.313
8443     2013-01-17 11:44:54.313
2006     2013-01-17 11:44:52.980
3143     2013-01-17 11:44:50.850
3760    2013-01-17 11:44:47.697
3406      2013-01-17 11:44:47.693
Example's of good
Duration
(in ms) Event_Time
3 2013-01-17 11:44:50.560
0 2013-01-17 11:44:50.410
3 2013-01-17 11:44:50.233
0 2013-01-17 11:44:50.213
0 2013-01-17 11:44:50.013
3 2013-01-17 11:44:49.813
0 2013-01-17 11:44:49.793
3 2013-01-17 11:44:49.627
0 2013-01-17 11:44:49.537
0 2013-01-17 11:44:49.363
0 2013-01-17 11:44:49.140
3 2013-01-17 11:44:48.097
3 2013-01-17 11:44:46.723
3 2013-01-17 11:44:46.117
3 2013-01-17 11:44:46.000
We can't up the timeout setting in the application, We've already looked into it and theres to much red tape for us to cut in order to implement that setting.
Recently our DB's were upgraded from Oracle 11.2.0.2 to Oracle 11.2.0.3. The very next day is when we started receiving these alerts.
Any thoughts?

What's it doing during these bad transactions? Is there a difference between what those are doing and what the fast ones are doing?
Off the top of my head with so little information, the only thing I can come up with is that a lock is being held which is delaying some of the transactions from completing until after the timeout hits.

ORA-01013: user requested cancel of current operation Disconnected from Ora

Hi Hussein;
When i run my script for cold backup in r11.5.10.2 solaris 9.2.0.8 database it gives me:
ORA-01013: user requested cancel of current operation Disconnected from Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit Production With the Partitioning, OLAP and Oracle Data Mining options JServer Release 9.2.0.8.0 - Production
What is matter?

Hi,
Run this query to determine the session details of the OS PID:
SQL> select s.sid, s.serial#, s.username, s.osuser, p.spid, p.terminal, s.program
from v$session s, v$process p
where paddr=addr
and spid='<OS PID>';Regards,
Hussein

ORA-01013 User requested cancel of current operation

Hi
I'm stuck with ORA-01013 on RDBMS 7.3.2.3.0 on OpenVMS 7.1. Yes, I know the product is long time desupported by Oracle, but some systems are built to last ... (!)
My client application is built with Forms 4.5; the application has a trigger running a longlasting database maintenance job.
Depending on overall system load ORA-01013 may show up more often, causing the application to fail, and job must be re-started. Setting the SQLNET.EXPIRE_TIME=0 (on server and client) apparently has no effect (I restarted the client only after changed settings).
I found bug no 590961 on metalink, and there should exist a patch held by global support, but no direct link. And there is no way that I may register issues for 7.3 using Metalik.
Upgrading Oracle to a supported version is unfortunately no option. Any suggestion for corrective actions that can be taken; it surely would be appreciated?

ORA-01013 is not an error message, it says someone/something (mostly a human) has interrupted the running application. You cannot avoid this by changing parameters or settings. Maybe users are too impatient and hit the interruption keys, if they think the application is stuck.
Werner

ORA-01013: user requested cancel...........

Hi,
I've an application on Oracle 10.2.0.3.0 that run a basic script but I get always this error:
ORA-01013: user requested cancel of current operation
I was thinking to solve the problem by changing the ODBC settings in ODBC sources, I'd like to uncheck the "Enable Query Timeout" option, BUT when I trying to do the following with the Oracle ODBC Driver version 10.2.0.3.0 I get the error:
"An unsupported operation was attempted"
Have someone any idea How can I fix my ORA-01013 error and ODBC error?
Thanks in advance!

Sqlnet.expire_time=0 which is a way to eable DCD wil not help here.
Please try to set the sqlnet. inbound_connect_timeout . But I doubt this will help because these parameters solves the timeout error.. the error we are getting here is like pressing ctl C while something is running.
The best way will be to enable a client trace and see the network error.
Also you can run the script locally to the server (if possible) to narrow down the issue.

Solved printer installation problem – "error-user-request-value-too-long"

A discussion in July 2006 left the problem of printer installation unsolved. My contacts with Apple Support have also led to frustration for everyone.
Whenever I have tried to install any printer I end up with the error message:
"error-user-request-value-too-long".
Luckily I discovered the shareware program "Printer set up repair" on Versiontracker. It worked wonders in 5 minutes. Now everything is fully functioning. It also provides an extremely useful log-file telling you which (often hidden) files that are missing or damaged.
Address: www.fixamacsoftware.com/software
Phew!

Well, I tried all of that and I'm still getting the error message. I've also repaired disk permissions and run Disk Warrior. When I repaired disk permissions, many HP printer items showed up in the list.

Report Job was cancelled upon user request???

Hi,
My reports take more than 10 minutes to complete, most times I get
"Report Job was cancelled upon user request".
error, how to fix this problem? Is there any time limit inside the report I can set.
Thanks

hi ,
There is no limit on the report run time. The most probable reason why you are getting the 'Report cancelled upon user request' message is the users might have hit the "cancel Report" button which is displayed when it is running in 'SYNCHRONOUS MODE'. do not hit that button as it will terminate the report. to increase the speed of returning the results by the report, try improving the sql that you use in the report, or if you have DBA rights try adding in INDEXES on the columns of the tables used by the report.
Hope this helps
Manoj

Oracle Reports Server CGI - Report Job was cancelled upon user request.

I am running reports on the web through Forms using Run_Report_Object built in. I am using Oracle 9iAS Enterprise Edition Release 1(1.2.2.2.2), Forms 6i Patch 9 (6.0.8.18.3) and Reports 6i Patch 9 (6.0.8.18) using CGI implementation. Most reports are running fine, but I have one that produces 125 pages and we are getting the following messages in the browser:
Error: The requested URL was not found, or cannot be served at this time.
Oracle Reports Server CGI - Report Job was cancelled upon user request.
However if you look at the Reports Server Queue Status thru the browser it shows that the report did finish, but it took 16 minutes. But the user gets the above message in their browser window.
Is there a way to get the first page of the report to display, while the rest of the report finishes, so the browser window doesn't timeout and display the above error?
Any help would be greatly appreciated.

hi ,
There is no limit on the report run time. The most probable reason why you are getting the 'Report cancelled upon user request' message is the users might have hit the "cancel Report" button which is displayed when it is running in 'SYNCHRONOUS MODE'. do not hit that button as it will terminate the report. to increase the speed of returning the results by the report, try improving the sql that you use in the report, or if you have DBA rights try adding in INDEXES on the columns of the tables used by the report.
Hope this helps
Manoj

Error occuring when submitting Active Users request in R12 on Solaris 5.10

Hi,
For a cloned environment, while submitting the active Users request it is completing with error. Below is the log file. Please help
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
There was an error trying to initialize the HPI library.
Please check your installation, HotSpot does not work correctly
when installed in the JDK 1.2 Solaris Production Release, or
with any JDK 1.1.x release.
Error occurred during initialization of VM
Signal chaining not allowed for VM interrupt signal, try -XX:+UseAltSigs.
Program exited with status 1
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 720610.
Review your concurrent request log and/or report output file for more detailed information.
Thanks,
Anand

Hi Anand;
Please check below metalink note:
There Was An Error Trying To Initialize The Hpi Library When Running Any Concurrent Reports [ID 836237.1]
Regard
Helios

"the item you've requested is not currently available in the indian store" error while trying to open App Store/iTunes on iPhone

Hi All,
Whenever i try to open the App Store/iTunes store on the iphone, i get the error "the item you've requested is not currently available in the indian store".
This happens whenever there is link for an App that i want to download and it happens for each and every app which is easily available on iTunes from PC. I dnt know what the problem is because of my friends who has an iPhone is able to access it, so its even more weird.The only difference is that she has an legally unlocked iPhone and i have the "other one". Please help...because it is very frustrating to everytime go on to the PC to download an App.

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

Error when user hits Cancel in File Dialog Box

Error 43 occurs when the user hits cancel about saving a file. I have a simple state machine, and when the user hits "RUN", the dialog box comes up. What if they change their mind? I have tried to use the "exception code" in the General Error Handler for Error 43 but I still end up with an error message or my VI stopping.
Are there any templates for VIs that save your data only when you press a "SAVE" button, or either that don't freak out if you hit Cancel?
p.s. I have LabVIEW 6.1.
THANK YOU
Lauren

Hey, I got the same problem, Error 43 when cancel button is clicked, as I was going through one of the examples from "LabView for Everyone" book. I downloaded the Cancelled.vi example and constructed a case structure for it. However, the problem still occurs. When i ran highlight execution for the cancelled.vi example, as the cancel button is pressed the file dialog goes through and sends out boolean value of the cancel status. But for the file I'm working with, the boolean value is not send when cancel button is entered. File dialog sends out an error before the values are send out... Can someone explain? Thanks.
Attachments:
test.gif ‏14 KB
test1.vi ‏48 KB

A error message pops up when I try to click top singles "see all" saying "Your request could not be completed the item you've requested is not currently available in the US store" when a few minutes ago it allowed me to do so.

A error message pops up when I try to click top singles "see all" saying "Your request could not be completed the item you've requested is not currently available in the US store" when a few minutes ago it allowed me to do so.

When I open the store in general (from my PC - Windows Vista), I get a message saying "Your request could not be completed. The item you've requested is not currently available in the Canadian Store."
On my iPad, Apps opens, but I can't browse new apps listings, but not their details.
Help?

Error: USer request cancel of current operatin

Similar Messages

Maybe you are looking for