Error using sender ws adapter

Hi,
I am getting the following error while using the WS adapter at the sender side.
the SOAP response indicates that an error occurred:
System Error
<detail><s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0"><context></context><code>INTERNAL.IN_BIND_WRONG_ADPT</code><text>Sender agreement found belongs to adapter WS, however the current adapter is XI</text></s:SystemError></detail>
Please help me in resolving this issue.
Thanks & Regards,
Hamsa Shree

Hi Prateek,
Thanks for ur reply.
I have used WS adapter at the sender side. And the communication channel provided in the sender agreement is correct.
Thanks & Regards,
Hamsa Shree

Similar Messages

Error using Sender SOAP adapter over HTTPS

Hi experts,
Few weeks ago, i developed an interface as follows: SOAP <-> XI <-> RFC.
I tested the functionality using Altova and everything went well, with HTTP.
However, when i use HTTPS it fails throwing these error messages (pop ups):
<i>"HTTP error: could not post file"......
"Error sending the soap data"</i>
I have reviewed the SSL certificates installation and everything seems to be ok, but currently i am stuck and do not know how to fix this.
I have also change the ID comm channel from HTTP to HTTPS with client aut.
Is there any special service i have to activate? (XI services and SPIGATE are already done)
Could you please assist?
Thanks in advance and best regards,
David

David,
have a look @ these threads...u may get some help!!!
Sender Soap with HTTPS
https Soap Adapter
Regards
Biplab

IOException: invalid content type for SOAP: TEXT/ using Sender SOAP adapter

Hi all,
When I am using Sender SOAP adapter, i am getting (MessagingException: Could not parse XMBMessage. Reason: java.io.IOException: invalid content type for SOAP: TEXT/HTML using connection SOAP_http://sap.com/xi/XI/System) exception.
From my RWB I can see:
2009-05-25 16:18:39 Information The message was successfully retrieved from the call queue.
2009-05-25 16:18:39 Information The message status was set to DLNG.
2009-05-25 16:18:39 Error Failed to parse the XI system response.
2009-05-25 16:18:39 Error The message was successfully transmitted to endpoint com.sap.engine.interfaces.messaging.api.exception.MessagingException: XIMessage creation failed (inbound). Reason: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Could not parse XMBMessage. Reason: java.io.IOException: invalid content type for SOAP: TEXT/HTML using connection SOAP_http://sap.com/xi/XI/System.
2009-05-25 16:18:39 Error The message status was set to FAIL.
2009-05-25 16:18:39 Error Returning to application. Exception: com.sap.engine.interfaces.messaging.api.exception.MessagingException: XIMessage creation failed (inbound). Reason: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Could not parse XMBMessage. Reason: java.io.IOException: invalid content type for SOAP: TEXT/HTML
Please help if possible! Thanks!
Mayank

Hi,
Check in SLD your integration engine business system have the following
pipeline url : http://server:httpport/sap/xi/engine?type=entry
check Http port also
After that go to TCODE - SXMB_ADM - integrationn engine configuration and check if your server is configured as HUB with the same url or not.
Thanks
Kasturika Phukan

How to get the filename in mapping when using sender File adapter?

hi Experts,
   I have scenario where XI reads the input file using Sender file adapter.
   The file name is configured in the communication channel.
   In my message mapping it is possible to read this file name?
Thanks
gopal

Hi Gpoal,
Use Dynamic Configuration - /people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
Regards,
Geetha

How to filter emails using sender email adapter

Hi,
Does any one know how to filter emails of mail server using Sender email adapter(POP3 protocol ) in PI .
To make it more clear let us assume that there are 10 emails in the email server then 3 emails should be fetched for Interface A , 3 emails Should be fetched for Interface B and remaining 4 emails should be ignored and left in the email server as it is , the reason for this is that it is not related with the Interface A or Interface B. Any suggestion or solution will be much appreciated.
Thanks & Regards
Prabhat

Hi,
I guess you didnt get my requirement clearly. My requirement is how to filter emails from email server using sender Email adapter in POP3 protocl and pass it to relevant Interface.
For ex: suppose email no.1 is related to Interface A then it should go to Interface A
or email no. 2 is related to Interface B then it should go to Interface B
or if email no. 3 is junk mail then it should avoid deleting that email and leave that email as it is
The problem/challenge here is that email adapter of Interface A or B reads it first and deletes the email message so it is not available for the Interface A or B.
So I just want that sender email adapter should filter it before deleting email from the email server.
Can you provide some solution for this?
Thanks & Regards
Prabhat

XI scenarios using Sender RFC Adapter

Hi Forum,
I am eager to know what kind of XI scenarios use sender RFC Adapter, can u give an example,
does this mean........executing a RFC in a R/3 system and the result of the execution goes to XI.....or,
does this means, like a sender JDBC Adpter, from XI, triggering execution of a RFC on a R/3, and getting back the result into XI............
can i have a step by step blog to create such a scenario....
thanks and regards

Hi Sudeep,
Sorry for late reply.
Yes the 2nd reply was for receiver RFC.
1. As i mentioned To configure Sender RFC you need TCP\IP connection. in that connection you will use the option registered server program and will mention a program ID there.
2. Sudeep just remember, please configure RFC sender on XI side first and give a Program ID there, gateway service, host and login of your R3 system. Program id can be any string your name also. and please dont forget to activate the channel before going to R3 side.
3. Then configure RFC in R3 side, and mention that same program id. mention your gateway host as R3 name or IP and you can get the gateway service from Tcode smgw. it must be something like smgw<xx>.
and for ur information the program id is nothing but an identity on which basis the R3 system will search that which server object is active using that program id.
4. when you will write a report to execute that RFC in background, use Commit work as last statement.
Please let me know if you want any further information.
Rewrds if found helpful,
Regrds,
Alok

Archive file with errors in sender file adapter not working! please help!

Hi Experts,
I have a file to RFC scenario. the input is a XML file. I have setup the flag in sender file adapter channel for archiving the input files with errors. But it is not working.
For testing I have used an invalid xML file for example without the main XML tag. I have also tested with a MSWORD file saved with.xml extension. But in both the cases the files are not getting archived.
My archive location permissions are fine and in fact normal archive operation is happening. That is, if I select the processing mode as "Archive" and gave the Archive directory then files are getting archived. The problem is only with the "Archive faulty source files" option.
What am I missing? DO I need to do some more configurations?
What are the prerequisites if any for this option?
How to test this?
Please help me! I will be greatfull to you all!
Thanks & Regards
Gopal

and go thru this links
Creating a Single Archive of the Version Files
http://help.sap.com/saphelp_nw04/helpdata/en/79/1e7aecc315004fb4966d1548447675/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/31/8aed3ea86d3d67e10000000a114084/frameset.htm
Note: reward points if solution found helpfull
Regards
Chandrakanth.k

Error in sender file adapter: source directory does not exist

Hi,
The PI system is 7.11
I've created sender file adapter with following details:
Transport Protocol : File System
Source directory: /interfaces/In
I checked in AL11 that this path really exists and it does. (I can even see the .txt file that should be processed.)
But still i get in Communication Channel Monitoring the following error:
"Configured Source directory "/interfaces/In" does not exist.
(i also tried to give the source directory as "interfaces/In" and as "//interfaces/In" but still the same error.
Any suggestions as to what is wrong?
kr
Robert

Actually, Need to use forward slash (/) to separate directory names in accordance with the Java specification.
But wanted to try if that works..
Also check directory name , path again as this is case sensitive...
--Divyesh

File to SOAP,error in sender file adapter

Hi,
I am doing a scenario FILE to SOAP where In file adapter I am using Quality od service as Exactly once in order.I am getting the below error.It works fine when I use QOS=Exactly once.Not sure why,can you guys please help me.Can we really use QOS-EOIO for sender file adapter,where exacly do we use it.
Thanks
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: invalid content type for SOAP: TEXT/HTML</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Edited by: guest xi on Apr 16, 2008 11:55 AM

Hi,
Thanks for your replies guys.I diid give the queue name ,I dont know what is causing the error.Now even QOS=EO which was working fine before is throwing an error.I am using the same file name for both
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: invalid content type for SOAP: TEXT/HTML</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Error in Sender AS2 adapter

Hi Expert,
I have configured sender AS2 adapter as per the sap guide. and share our url and AS2 name.Now when the partner is trying to send the file from their side they are gettting the following error message and in SAP PO we have not received any file via AS2 sender adapter.
We have checked the fire walls and its working fine.
2014.04.09
01:15:03:128 0326030999 PHDR OK HTTP Response-Line = (HTTP/1.1 302 Found)
2014.04.09 01:15:03:128
0326030999 PHDR ERR Trading Partner rejected the transaction
2014.04.09 01:15:03:128 0326030999 HPOS ERR Requested synchronous receipt not
returned
2014.04.09 01:15:03:128 0326030999 HPOS ERR One or more errors occurred with
this transaction. m_nErr=(2103)
Regards
Kasturika

Hi Harish,
I have change the as2 url from http://<host>:<port>/AS2 to http://<host>:<port>/AS2/B2B and now are partner is facing differnt error
2014.04.22
03:06:04:400 0637647174 PHDR OK HTTP Response-Line = (HTTP/1.1 401
Unauthorized)
2014.04.22 03:06:04:400 0637647174 PHDR ERR Trading
Partner rejected the transaction
I had checked with my partner to use the http authentication and share our user id and password. but they said that they are not using http authentication.
we also shared our public key certificate and import theirs in our nwa- certificates and keys .
Please share if anything more i need to configure.

'Source Directory doesn't exist' error in sender file adapter

Hi All,
I m getting the error 'Source Directory doesn't exist' in sender file adapter.
The source file directory doesn't exist in XI Server. Its in a different system.
gone through other sdn t hreads.
the options seems to be
1. either to mount the Source Directory on the XI Server.
2. Install a FTP server and use FTP protocol.
My doubt is that, could nt we give necessary access rights to the XIAFUSER whihc will access the Source Directory?
Wont it be sufficient?

Hi Aarthi,
If you are using system other than XI, then you have to use FTP server
else check you have proper authorization of read/write to the source directory...
and check the name of it as well, as it is case sensetive and you have provided the proper details of server.
check these blog as well...
/people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi
/people/shabarish.vijayakumar/blog/2006/08/01/along-came-a-file-adapter-mr-ftp-and-rest-of-the-gang
Sachin
Edited by: Sachin Dhingra on Mar 24, 2009 12:16 PM

Error in Sender AXIS adapter with UsernameToken

Hello,
I'm trying to implement a web service with UsernameToken authentication (legacy >PO>ECC), after research in this forum, some blogs and notes, I've found this approach: Axis Adapter Sender Comm Channel with usernameToken .
I did all steps, but everytime I try to consume the web service, it doesn't work and I get the following error in default trace:
No application classloader can load login module class: com.sap.engine.services.security.server.jaas.DigestLoginModule. Probably application that deployed the login module is stopped and cannot be started.
My system is PO 7.4 SP5.
Do you have any idea?

Hi,
May be below links will help you
1. /people/michal.krawczyk2/blog/2005/12/18/xi-sender-mail-adapter--payloadswapbean--step-by-step
2. Have you used method of ConnectionFactory also??
3. 804102
xi 3.0 mail adapter with pop3 user authentication problem
4. 810238
XI 3.0 Mail Adapter for POP3 may not report some errors
Thanks
Swarup

Vaildating File name with the data in the file using sender file adapter

Hi,
Below is the scenario
1)       Pick up files from a FTP server, the file name is dynamic, how do I put dynamic name in sender file adapter?
2)       Determine if the user correctly named the file based on data in the file.
a.       File naming structure that we will be concerned with is <company_code><accounting_time_period>.<extension>
b.      The company code and the time period in the file name have to match the data in the file.
i.      For example. If the file name is 1001_200712.csv and the data in the file is for company code 1005, time period 200712, the file is incorrectly named. Both values must be correct.
How do we do this?

Hi Sachin,
                As Rightly said by Krishna, You can not put Dynamic name in sender File Adapter .You have to provide the name of the file like "*.txt" in Sender Adapter and at runtime you can access this file name by using following UDF:
DynamicConfiguration conf = (DynamicConfiguration) container
.getTransformationParameters()
.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String valueOld = conf.get(key);
return (valueOld);
As now you have picked up the file name at runtime.
Now concatenate source file fields Company_code and Accounting_timeperiod using "_" as delimiter in properties.Also concat the extension .Now you have required file name.
So using EQUALS standard function ,compare it with File Name fetched at runtime using above given UDF, and pass result as you desire to process further or not or to raise Alert to resend the file.
Thanks & Regards,
Anurag Garg
You can validate this file name in Mapping itself.

Using sender file adapter to read the most current file

Hi,
in my sender file adapter , i have to read the latest file- all files in the source directory are named as <filename><timestamp>.txt . I need to read the file with the latest timestamp (i.e. the most current file )
How do i configure this using file adapter.
thanks

Hi Sreeram,
thanks for the answer- but i found that the option can only be used with NFS transport protocol. what if i am using FTP ?
alos, by date option means- files are processed according to their time stamp in the file system, starting with the oldest file.
However in my case i only want to read the latest file and ignore the older files.
Thanks

How to process files one by one using sender file adapter

Hi,
I have to process file one by one using my file adapter (sender), because while doing the G/R materials get locked, if the same materal exist in other files.
I have maintained QOS as "Exactly Once in Order" & processing Sequence as "by date".
Processing sequence come in which tab? What will be the Queue name?
Thanks,
krishna

It will come under Processing tab
Here you need to select the first parameter QOS as EOIO
Then QUEUE name and processing sequence will be enabled.
NOTE: This will work only for NFS protocol not for FTP.

Error using sender ws adapter

Similar Messages

Maybe you are looking for