Error Valuation & is not maintained for material & in IDOC
Hi Experts!
I'm currently having a difficult problem here.
This is an idoc issue. The scenario is: An idoc is created from WEB and an error appears "Valuation & is not maintained for material &" in SAP. But when we reporcess again usign the same data through WE19 everything seems to be okay. The status is green. Do you have any idea regarding this?
The error must not appear because the material that is being process is a non-stock material which does not need valuation.
I hope somebody can help me on this.
Thanks in advance!
Hi,
Please see that error ME124 ir raised because view "plant stock /
storage location stock" is not maintained in material master for plant.
if the material is not available in stock then no delivery and no
transfer is possible. It is not possible for non-stock
materials to make an stock transfer.
If you are using ME21* to create stock transfer order,
Please make sure the view "plant stock / storage location stock"
have maintained for the relevant plant in the material master
record.
Please also make sure the quantity flag have switched on in Ta OMS2
for both the delivery and receiving plant for the material type
that you are using. Otherwise, the error message ME 124 will be
issued.
But if you get the error error ME124 only for a vendor is the
assignment in Vendor Master (MK03) to plant. This assignment is
used in case of STO, in which plant must be assigned to vendor.
In order to not get the error, please remove plant in the
following path:
XK03 > Extras > Add. purchasing Data > Plant assignment.
BR
Nadia Orlandi
Similar Messages
-
Valuation type Not Exist for Material
Dear Experts
Whenever i Doing Manual posting of GR/IR through MR11 And In that case some of them Material is Showing the Error No Valuatiuon Type Exist for the Material.
No valuation type exists for material
Rgds
Pankaj AgarwalCKMLGRIR024
Short Text
No valuation type exists for material &
Diagnosis
You are trying to post to material (). This material is subject to split valuation according to valuation type (valuation type = ). It was not possible to determine a valuation type for the posted operations.
System Response
The posting will not be accepted as a valuation type can not be found.
Procedure
Check which valuation type the GR/IR clearing account maintenance should post the balance to. The valuation type must be created before the GR/IR clearing account maintenance posting is made.
You can either:
*Post the goods receipt with reference to this order, enter the valuation type and then execute the GR/IR clearing account maintenance again.
or
Reverse the Invoice(s) that have led to this balance in the GR/IR account.* -
Modvat accounts not maintained for CEIV
Dear Experts,
We are getting error Modvat accounts not maintained for CEIV for excise group while cancelling excise invoice thru J1IH, cancel excise invoice. The same error is not appearing in production system. its happening in development & acceptance system only. we have upgraded dev & acc system to support pack 16. please comment on thisdone
-
Archiving control not maintained for CIR document .T-code MD82
Hi All,
I have archived sales order till 31/12/09 in the production system, but the Customer Independent Requirement that is
CIR documents (MD82) are also there in vbak table ,now i have closed all the open document by putting rejection reason.
When i am trying to archive the document it is giving the error "Archiving control not maintained for the document" .please
suggest where to maintain these archiving control and what is to be maintained.
Thanks and Regards
Abhilash NayakHi,
Check your entries in tcode VORA.
Regards,
Eduardo -
Number group not maintained for CO code while executing J1INCHLN and J1INCH
Hi,
While creating remittance challan through J1INCHLN ,particulary for Section 194H and J1INCHLC for Section 194H&194C the system showing an error "Number group not maintained for CO code XXXXSection 194C and business place 194C.
This is a regular transaction we do every month.Recently we have upgraded from 4.7e to ECC 6.0 version.
Please suggest.
Regards,
Nageswar Rao JHi,
In ECC 6.0 Real Time Integration is present between FI and CO i hope due to this it might throwing error.
Please go to KANK and try to assign as per the error.
regards
srikanth. -
Number group not maintained for CO code section and business place
Hi Experts,
I am Facing this error 'Number group not maintained for CO code section and business place' while posting TDS entry ,
I have maintained the number groups for internal challan numbers and i have also checked the table 'J_1IEWTNUMGR_1' , the entry exists, I am not able to track the problem.?
the below mentioned are the example of the entry which is maintained inspite of which am facing the error.
company code - 4001
Business Place 4384
Section 194I
Thanks in Advance,Dear,
Please check whether you have maintained entry in SPRO>IMG>Financial Accounting>****>Withholding Tax>Extended Withholding Tax>Posting>Certificate Numbering for Withholding Tax>Numbering Concenpt4 :Assign Numbering Group
If not then please maintain the same.
Regards.
Vivek -
Assessable value not maintained for the material X
Dear all,
i have maintained material chapter ID,Plant and materialchapter id combination ,assessable value , cenvat determination, and vendor excise details in the transaction J1ID .
Even after maintaining all these conditions , i am not able to save the po,while saving the po i got a error message that assessable value not maintained for the material X..
Points will be rewarded for useful suggestions.
Thanks in Advance.
velu+91-9789991357Hi,
Search using approriate keywords in SDN, u get most of the details, i have now done the same searched and have pasted below .
Try ME2N.
Click on the "dynamic selections" icon and add the release indicator as an additional selection. Enter the release indicators that you class as "awaiting approval" and you will then have your list.
The ME2* series of transactions are not that much use prior to 4.7, the layout is poor. But if you have 4.7 or later you can get the screen to use the ALV format and this transforms the ME2* (i.e. ME2L, ME2M, ME2N etc.) transactions into VERY useful reports. -
Accounting data not yet maintained for material 2010 R-1130-40
Hi Guys
I was trying to post a goods issue, but having a error that says -
accounting data not yet maintained for material 2010 R-1130-40
I then tried MM02 to maintain the accounting view, but also having an error that says -
accounting 1 not active for the organizational level.
Any ideas please as to what to do.
Chears
KofiyahyaExtend the Accounting view with Tcode :MM50
Go to MM50 , select Maintenance status as "B" and enter Material number and click on execute (F8), then select the Material line item and click on Maintain Materials tab.
Regards,
Ramesh -
Serialization not possible for material number (SHPCON IDOC error )
Hello,
Can any one shed some light on following inbound PGI IDOC (SHPCON) Error from 3PL.
"Serialization not possible for material number XYZ"
Message no. IO205
Diagnosis
The serial number profile of the material does not allow serialization for the operation you have chosen.
Procedure
Maintain the serial number profile.
Additional info
1) Serial number profile is maintained in the material master
2) Serial number populated in the idoc E1EDL11 is not used in any delivery or assigned and it is valid serial number and has equipment master record
3) If i use the same serial number from the IDOC and post PGI manually via VL02N , I am able to post the PGI without any problems and I don;t get the above error
4) IDOC has all the info required , Delivery number,Valid material # , qty,UOM and Line item number of the delivery .
Thanks in advance for your help
GJDear Jalwadi
I got exact same problem. How did you solve it? -
Hi Team,
We have a requirement to "Populate Error Message(Supervisor not Maintained) while submitting Travel Request if Supervisor(A002) relationship is not maintained for employee in ESS.
We are using standard WDA application - FITV_REQUEST and standard travel request workfow - WS20000050.
Please suggest how to do this.
Thanks,
RaviHi Rajesh,
Thanks for the reply...
We created enhancement for FM HRTRV_IF_GET_CUSTOMIZING and written code in that.
So by this if Logged in Employee is not assgned with Line Manager , it will throw error while accessing "Create Travel Request application".
Thanks,
Ravi. -
SAP BW DTP error: Fiscal year variant is not maintained for calendar year
Hi experts,
Running DTP for loading 2LIS_12_VCITM results in following error "Fiscal year variant A2 is not maintained for calendar year 2012".
I have already done following checks:
- the fiscal variant A2 exists for the fiscal year 2012 in the BW system (T009 tables)
- the DTP does only give this error for 2 company codes, and works fine for other company codes
- in our R3 system, the fiscal year variant A2 is assigned to all the company codes, how or where can I check this assignment in the BW system ?
Kind regards, Guy VerschuerenHi
Please check the following threads
"Fiscal year variant V3 is not maintained for calendar year 2011" (OAOB)
Error FGV002: Fiscal year variant & is not maintained for calendar year &
Hope it helps.
Thanks,
Rajesh.
Please assign points to answers if you find them heplful -
Error FGV002: Fiscal year variant & is not maintained for calendar year &
Hi all,
I am facing a unique problem in BW production. This is not happeneing in my Development.
Whenever I goto table "/BI0/SFISCPER" or do F4 on any Fiscal Year / Peiod field, I get the message " Error FGV002: Fiscal year variant R1 is not maintained for calendar year 2005" . In my client R1 is Shortened Fiscal Year. But we are not using this for year 2005 and most years. And the message is Type Error. I tried to debug but the code enters in 100 odd Function Modules and does not give any answer.
My Finance Person has checked the settings in transaction SPRO > SAP Reference IMG > BW Customizing Implementation Guide > Business Information Warehouse > General BW Settings > Maintain Fiscal Year Variant). They are exactly identical to R/3 production setting.
I have already done rebuild of Fiscal Year Variant from Source System by right clicking and loading data again.
I am using BW 3.0B with Bi Content 3.1 . Please advise urgently.Hi TCS
Please check these SAP notes in advance:
1619823
1835628
Please advice if this helps.
Regards
PC -
Hi Gurus,
When I try to capture deemed export license from J1ILIC01 I get this error
The number range is not maintained for Object/Year: J_1ILIC/
I tried to maintain number ranges in SNRO & SNUM there the changes are saved but I am not able to capture the license and receive the same error again. Please help.Hi
Just check if you have maintained number range for the correct year as shown in error.
Goto SNRO/SNUM enter the object ID and click on number range .Maintain there for that particular year. -
Error in bdc (Background processing not possible for material)
Background processing not possible for material with serial number reqmt
Message no. M7419
Diagnosis
You tried to enter the count for a material managed with serial numbers using background processing. This function is not supported.
Procedure
Use the transaction 'Enter inventory count' (MI04) to enter the count for materials managed with serial numbers.Can You Run this BDC in Foreground Mode
I am doubtfull for that.
please check
Gaurav Sood -
Valuation Type is missing for Material and Batch
Hi Experts,
I am facing issue related to delivery.
While creating Order to cash cycle for one sales area, there is no error at all, but when I am trying to repeat the same cycle with same customer and material, different sales area and document type, I am not able to save delivery document. and receive error as "Valuation Type is missing for Material X and Batch Y".
Kindly suggest possible errors.
Regards,
HimmanshuCheck whether the required Valuation type is maintained in material master. Also, update the error message number.
G. Lakshmipathi
Maybe you are looking for
-
My internet was down for over 24hrs after a storm. During that time, my IPad completely shut down and I can't get it going again. I studied the manual but couldn't find a similar topic. I reset it and now it is totally goofed up. Does anyone h
-
Can't connect to the internet with my iPod touch 4th gen.
So I have an iPod touch 4th gen. and have been able to get wifi from my computer with no problem but now it's not working. When I choose the network I've always used I see the 3 lines on top of the screen that show when it's connected to the internet
-
Hi All, Can anyone help me restore all my old contacts please? I bought a new phone for my Daughter, set it up to my iTunes account as she is only 11 and all of my contacts synced to her phone, so we went in and deleted them all, problem was, they de
-
Unable to clear "Check Paper" light PSC 1350xi
Unable to clear "Check Paper" light 1) Upgraded from XP to Win7 x32 2) Installed HP PSC 1350xi Win7 driver software using Printer Install Wizard 3)After many Print attempts, unable to clear "Check Paper" error message 4) After several uninstall/reins
-
Stored Procedure calling from EJB
Can i call a stored procedure from a EJB. First time attempt. IF some details available will help me a lot