Unable to clear "Check Paper" light PSC 1350xi

Unable to clear "Check Paper" light
1) Upgraded from XP to Win7 x32
2) Installed HP PSC 1350xi Win7 driver software using Printer Install Wizard
3)After many Print attempts, unable to clear "Check Paper" error message
4) After several uninstall/reinstalls using several HP approved methods, all software diagnostics checked normal except for the blinking "Check Paper' light.
5) And, yes, I tried adding, removing, adding paper to the tray which appeared normal.
My guess is a hardware problem.
Any suggestions?
Thanks in advance.
Bill

Hi @wflint,
Welcome to the HP Forums!
I see that you are unable to clear the "Check Paper" light on your HP PSC 1350xi. I am happy to help!
Please take a look through this guide, Blinking Lights on the HP PSC 1200, 1310, 1340, and 1350 All-in-One Printer Series. Scroll until you see, Issue: The Check Paper light blinks, then click on, Solutions, under Figure 19: The Check Paper light is blinking, and follow the steps.
Hope this will resolve your issue, and have a wonderful day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Similar Messages

  • How can I fix a check paper error on the HP psc 1210 all in one printer?

    Product name/number:  HP PSC 1210 all-in-one
    OS:  Windows 7
    Error Msg:  Check Paper light flashes
    I have verified there are no paper jams, paper is loaded, print cartridges move freely and rollers are clean.  Is there a a paper out switch that can fail?

    Hi there,
    This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Verifica carta - check paper

    Hi! I have a problem with my psc 1315. Sorry that I don't speak english ( I speak italian), I will tray to explain the problem: on my printer there is a light in "verifica carta" (check paper). The printer did not have problem with paper since now and there is a lot of papers into the printer in this moment.
    What can I do to? The printer does no more check per exsisting paper?
    Thank you for a replay! 

    Hi @burner04 
    Welcome to the HP Forums!
    I see that your check paper light is on your HP Photosmart C3180 printer, and that you can scan but not print. I am sorry to hear this, but I am happy to help!
    Please go to this guide, Blinking Lights on the HP PSC 1500 and Photosmart C3100 All-in-One Printer Series, scroll down untill you see the section Issue: The Check Paper light is blinking, then click on Solutions and follow the steps there.
    Hope this works out, and have a great day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Unable to clear Vendor f-44

    Hi All,
    Unable to clear vendor F-44, after selecting item and when simulating getting error as Posting is only possible with a zero balance; correct document.
    The posted documents are old fiscal year document and the Clearing date is current date.
    with regards,
    Moderator: Please, avoid asking basic qeustions

    Hi,
    Just check whether the Debit amount and Credit amounts are tallying or not.
    Debit should be equal to Credit
    Just check once again
    Thanks
    Edited by: nkonnipati on Feb 27, 2012 3:47 PM

  • Unable to clear file upload fields in web pages.

    When visiting any site which has the option to upload a file, I am unable to clear the field if I change my mind about uploading a file.
    A website has a BROWSE or UPLOAD field and button. Pressing the button brings up the open file dialog. I select a file and select open in the dialog. If I then click on the field containing the path/file, I am presented with the open file dialog. I cannot clear or edit the field on the web page.
    I originally thought it was something with the web page I visited, but then found another page did the same thing.

    For instance if you go to this page again in Safari,
    http://www.apple.com/quicktime/qtv/mwsf06/
    and then select "View Source" from the View menu, then press command-f to "find" within the page and search for ".mov"
    You will find this, which shows the url of the movie itself.
    <param name="href" value="http://stream.qtv.apple.com/events/jan/mw2006/mmw_2006_650ref.mov">
    If you copy just this part:
    http://stream.qtv.apple.com/events/jan/mw2006/mmw_2006_650ref.mov
    And open QuickTime Player, go to the File menu, select "Open URL" the movie will play.
    If you try the same technique on the page at the link provided by your client, it will allow you to bypass the html code that may be doing an outdated compatibility check and the movie may play. Or it may tell you that you are missing components (codecs, compressors etc.) in which case, post here again.

  • Unable to clear out the stock in SAP

    Hi Expert!
    Need your help. I have an issue, my user wants to clear out the stock in SAP because they are the old stock and there's no stock in actual warehouse for those materials actually. it is just in the system taht showing those materials have stock in warehouse. but however, she's unable to clear out the stock. So when i check in the system, the materials are batch managed and still have open POs dated on 2003 which has already old.  Is it the reason why she can't clear the stock? Do i need to ask her to off the batch management for those materials,then delete the POs and then only she able to clear the stock? Please advise on the solution..
    Thanks.

    hi
    do the physical inventory and adhust stock
    1) Create physical inventory doc using MI01
    2) Post the Physical Inventory stock Using MI04 ( Mark Tick if the stock is Zero)
    3) Post the doc in Using MI07
    Note : Give the batch no if the material is activated the batch

  • Unable to clear vendor with different currency being posted

    Dear Experts,
    One of our vendor's Invoice billed in currency USD, several payments has been posted with different currency according to our Bank currencies. Full payment has been made to the balance of ZERO, but we still unable to clear this vendor account. Any expert can help me how to clear the above mentioned vendor.
    Regards/Lisa

    Hi,
    Please check whether the customisation for exchange difference accounting has been done.  If so then
    T Code is F-44 or F-04
    Either use Local Currency. : In this case if there is any exchange rate difference between the invoice and payment date the difference will be posted to exchange diff account.
    Or Use the Doc Currency : In this case you can provide the exchange rate in the transaction so that you will not get any exchange rate difference.
    Hope this solves your issue.
    Regards
    MPI

  • Unable to clear a GR document via f.13

    Hi,
    My user is unable to clear a GR document via F.13 since the IR document had been clear with other document.
    It was noted that GR document do not have a matching document.
    User try to clear the GR document manually via F-03 by manual entering the clearing to offset but this leaves the clearing document as open.
    Please advise.

    Hi,
    Above credit entry in GR/IR account is at the time of GRN, and 2nd debit entry in GR/IR  account will be at the time of Invoice. see below entry.
    Debit GR/IR  690
         Cr. A/P(vendor) 690
    Therefore in GR/IR account is open item manage account, and you can see the debit 690 and credit 690, in GR/IR account, and this you have to clear in F.13 please check and confirm.
    You can also view the PO history in ME23N, to verify that the invoice is posted or not, and if invoice is posted, then click on invoice doc, then go on followup FI document, which will show you what account has been debit.(this should be GR/IR with 690).
    Your vendor invoice will be cleared once you it pay it through F110/F-53/F-58.
    Regards
    Javed

  • ForgeComponent.cleanDirs unable to clear "processing"

    Hi,
    We're using MDEX 6.2.2 with PlatformServices 6.1.2 on a Red Hat Enterprise Linux Server v5.7.
    We've started facing a strange problem lately. While executing a baseline, it fails at Forge.getIncomingData. It fails while trying to move a sub-folder folder from data/incoming to data/processing. On further analysis we realized that the problem is being caused by the Forge.cleanDirs method. This method is meant to clear out the input-dir, output-dir and temp-dir configured for the Forge component. However, in this case, it is unable to clear the contents of the input-dir (data\processing). When this method is called, it simply skips cleaning this directory as if it is already empty.
    We checked the permissions on this folder didn't find any issues. The 'endeca' user is the owner and even with a 777 access, this method is unable to clear it out. However, we are able to clean it manually with the same user.
    We were able to fix this problem temporarily by deleting the 'processing' folder itself and then re-creating it. It worked fine for a couple of days and then the same error resurfaced.
    This problem is present is only on one specific ITL server in our environment.
    Any pointers would be greatly appreciated.
    Thanks.
    Warm regards,
    -Adi

    Hi Rohan,
    Welcome to SDN!
    This error means that you're trying to duplicate a record on the DB... check the IDOC  number ranges... it might help
    Regards
    Juan
    Please reward with points if helpful

  • Unable to clear change records

    Hi ,
    We are facing an issue where the there are few 261 records in COGI from previous period and a different storage location , but unable to clear inspite of changing the storage location with sufficient quantity of stocks . It is still displaying the message ' Deficit of stocks in that storage location'. Please provide your suggestions.

    Hi Crazy,
         Please make sure that you have had enough stock at sloc on specific period.You can analyse the stock by posting date in MB5B. Please check any existing reservation blocked the stock, then clear the reservation and post.
    Thanks

  • Unable to clear the cache content

    Hi
    messages are stuck in queue, so i went smq1 & smq2 and clear the queue. again i processed it while putting the file in ftp.
    In sxi_cache i went and seen it is showing - Unable to clear the cache content. traffic light is in red mode. I know that it should be green....
    thanks

    Hi,
    Please gothrough the same disscussion
    Error in Cache Refresh(Unable to refresh cache contents)
    SXI_CACHE Error:  Unable to refresh cache contents
    Regards
    Seshagiri

  • UD ICCO SPCO STUP- unable to clear the stock in Quality View.

    Hi!
                    In a QM -Module for a particular material status is showing as "UD ICCO SPCO STUP" in QA32. Usage Decision is done for this particular item. But it is showing the stock in MMBE Tcode. Its unable to clear in QA32.
    I tried QA12 and also QVM2 for this stock moving from Quality Inspection to Unrestricted stock. but i am unable to do so.
    Could any body plz help me to clear the stock from the Quality View.
    Thank you!
    -M.Suba

    Hi,
    Since lot status is "UD ICCO SPCO STUP", the stock posting against that lot is already done.
    Is batch management active ? is so then check whether you are getting  stock of that batch in Quality in MMBE.
    Chances of some other lot for same material  having status SPRQ are more, go to QA32 put specific material  and select all lots, then apply the filter to status field  and search for SPRQ status availability. You will find some lots of same material  for which UD given but stock posting not made.
    Please check and revert.
    Best Regards,
    Shekhar

  • Unable to clear in T-code FEBA

    Hi Gurus,
    please anyone help him  below issue
    NZ-02GRAFT  unable to clear in T-code FEBA
    Thanks&regards
    yugandhar

    Hi,
    What is NZ-02GRAFT? Is it a user name, then check the access issue in transaction SU53 from this user id and ask your BASIS team to provide it.
    Otherwise provide the message number and other details which you are facing.
    Regards,
    Gaurav

  • Unable to clear Stock from Inventory

    Hi All,
    We have a issue where in user is unable to clear stock from inventory , basically these stocks are sales order stocks. When we check for sales orders they are not available in the system now.
    When we try to do MB1B using movement type 413E, we get the error message saying the sales order does not exist.
    Kindly reply  is there is any way to clear this stock as the sales order is not existing in the system.
    Regards,
    Gopal

    Please check this answered link:
    Re: Material showing in system.
    how to scrap sales order stock if the referenced sales order is deleted.
    Remove Sales Order Stock from MMBE.
    Re: deleted sales order
    Edited by: Afshad Irani on Jun 1, 2010 2:41 PM

  • I am unable to clear memory.  Usage, in Settings, just spins.  I have erased pics and that did nothing.

    I Am unable to clear memory.

    If you deleted photos from the Camera Roll album they may still be on your iPad. Check the Photos app and look for the Recently Deleted album. Photos reside there for 30 days in case you want them back. If you are sure that you want to delete the photos deleted them from the Recently Deleted album.

Maybe you are looking for