Error Viewing the Execution option of a Report
I select the option execution from a report (it's in properties option) and then raise an error which says An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help
EXECUTE permission denied on object 'xp_sqlagent_notify', database 'mssqlsystemresource', schema 'sys'.
I have full privileges in the DB and I think the report server is well configured. This is happening since I reinstalled all the system (including windows). Any ideas?
I think you would need to grant permissions to SQL Agent stored procedures that Reporting services use. Here is the list from our installation script:
USE master GO
GRANT EXECUTE ON master.dbo.xp_sqlagent_notify TO RSExecRole GO GRANT EXECUTE ON master.dbo.xp_sqlagent_enum_jobs TO RSExecRole GO GRANT EXECUTE ON master.dbo.xp_sqlagent_is_starting TO RSExecRole GO USE msdb GO -- Permissions for SQL Agent SP's GRANT EXECUTE ON msdb.dbo.sp_help_category TO RSExecRole GO GRANT EXECUTE ON msdb.dbo.sp_add_category TO RSExecRole GO GRANT EXECUTE ON msdb.dbo.sp_add_job TO RSExecRole GO GRANT EXECUTE ON msdb.dbo.sp_add_jobserver TO RSExecRole GO GRANT EXECUTE ON msdb.dbo.sp_add_jobstep TO RSExecRole GO GRANT EXECUTE ON msdb.dbo.sp_add_jobschedule TO RSExecRole GO GRANT EXECUTE ON msdb.dbo.sp_help_job TO RSExecRole GO GRANT EXECUTE ON msdb.dbo.sp_delete_job TO RSExecRole GO GRANT EXECUTE ON msdb.dbo.sp_help_jobschedule TO RSExecRole GO GRANT EXECUTE ON msdb.dbo.sp_verify_job_identifiers TO RSExecRole GO GRANT SELECT ON msdb.dbo.sysjobs TO RSExecRole GO GRANT SELECT ON msdb.dbo.syscategories TO RSExecRole GO
Similar Messages
-
SMQ2: SYSFAIL Comparison error during the execution of a simple
Hi folks, I have an operation mapping interface determination with exactly 1 target message of occurence 0..1, that means the mapping output can be nothing for some input messages, that means a target message is not produced so that the output looks like this:
<?xml version="1.0" encoding="UTF-8"?>
<Messages><Message1/></Messages>
In services builder the test finishes successfully when no output message is produced. Also in integration builder i can test the configuration and it works without errors.
But in runtime the message status is set to "Recorded for Outbound Processing" in SXI_MONITOR and the queue status of the message to "Message has errors". The message stops in SMQ2 with "SYSFAIL" as status and statusText "Comparison error during the execution of a simple" (truncated).
Anybody experienced the same? How has the output of an operation mapping to look like when no target message is produced?
I also tested with an output like this when no target is produced, but this results in System error "Split mapping created no messages" in SXI_MONITOR:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1></ns0:Message1></ns0:Messages>
Thanks for your help, best regards, MartinYou seem to be having a multi-mapping involved.
The operation mapping has to produce at least the start and end tag.....even if the entire message is not present
Ex:
<SRC>
<First>
<Middle>
<Last>
</SRC>
If above is the structure, then it should be ensured that at least <SRC></SRC> is created by your mapping program....however in your case this is not happening....the tags that you see Messages and Message1 are due to the multi-mapping program and your message should be more than this.
if you say that occurence is 0..1 then what you can do is map this 0..1 node (root) with at least a blank Constant.
Unless you create a message (even though empty) you will continue to receive the error message.
Regards,
Abhishek. -
Populating multiple entries in the select option of a Report
Hi,
Ineed to populate multiple entries in the select option of a report where the bdctab has more entries than the number of rows in the select option. I have tried the transaction LINS ( Insert row) but it works intermittently based on the RSSEL-LOW(xx) value. Looking forward to any inputs.
cheers
AveekHi,
Here is my code dump:
**Version 0005
*CTS D7AK900899 New Version code fixed for testaveek28 case.
*MOD-1887120: Code that is changed after the release of transport.
Populate the general selection criteria on first screen
PERFORM f_populate_bdc_tab USING:
'X' 'APO_BAPI_DEL_TRANS_OBJECTS' '1000',
' ' 'BDC_CURSOR' 'EXT_PROD-LOW',
' ' 'BDC_OKCODE' '=%011',
' ' 'BDC_OKCODE' '=DUMMY',
' ' 'PLVERS' '000',
' ' 'MD_SYS' p_log,
' ' 'EXTRB' 'X',
' ' 'MO_DEL' 'X',
' ' 'SIM' space,
' ' 'P_LOGDEL' '5'.
sort it_core_prod by pcode.
delete adjacent duplicates from it_core_prod
comparing pcode.
describe table it_core_prod lines lv_line.
CLEAR lv_count.
LOOP AT it_core_prod ASSIGNING <lfs_data>.
lv_count = 1.
CONCATENATE gc_rscsel gc_l_brac lv_count gc_r_brac INTO lv_fname.
if lv_line > 1.
PERFORM f_populate_bdc_tab USING:
'X' 'SAPLALDB' '3000',
' ' lv_fname <lfs_data>-pcode,
' ' 'BDC_OKCODE' '=LINS'.
CLEAR lv_fname.
ENDLOOP.
*Populate the select options screen for product
PERFORM f_populate_bdc_tab USING:
'X' 'SAPLALDB' '3000',
' ' 'BDC_SUBSCR' 'SAPLALDB 3010SCREEN_HEADER',
' ' 'BDC_OKCODE' '=ACPT'.
sort it_prod_var by pcode prvar.
delete adjacent duplicates from it_core_prod
comparing pcode prvar.
PERFORM f_populate_bdc_tab USING:
'X' 'SAPLALDB' '3000'.
LOOP AT it_core_prod ASSIGNING <lfs_data>.
lv_pcode = <lfs_data>-pcode.
*lv_count = lv_count + 1.
lv_count = 1.
CONCATENATE gc_rscsel gc_l_brac lv_count gc_r_brac INTO lv_fname.
if lv_line > 1.
PERFORM f_populate_bdc_tab USING:
'X' 'SAPLALDB' '3000',
' ' lv_fname <lfs_data>-pcode,
' ' 'BDC_OKCODE' '=LINS'.
CLEAR lv_fname.
describe table it_prod_var lines lv_line.
sort <lfs_data> by locno pcode prvar.
LOOP AT it_prod_var ASSIGNING <lfs_data1> where pcode = lv_pcode.
lv_count = lv_count + 1.
lv_count = 1.
CONCATENATE gc_rscsel gc_l_brac lv_count gc_r_brac INTO lv_fname.
if lv_line > 1.
PERFORM f_populate_bdc_tab USING:
'X' 'SAPLALDB' '3000',
' ' lv_fname <lfs_data1>-prvar,
' ' 'BDC_OKCODE' '=LINS'.
else.
PERFORM f_populate_bdc_tab USING:
' ' lv_fname <lfs_data>-prvar,
' ' 'BDC_OKCODE' '=LINS'.
endif.
CLEAR lv_fname.
ENDLOOP.
ENDLOOP.
Populate the select options screen for product
PERFORM f_populate_bdc_tab USING:
'X' 'SAPLALDB' '3000',
' ' 'BDC_SUBSCR' 'SAPLALDB 3010SCREEN_HEADER',
' ' 'BDC_OKCODE' '=ACPT'.
Populate the select options for the Locations
PERFORM f_populate_bdc_tab USING:
'X' 'APO_BAPI_DEL_TRANS_OBJECTS' '1000',
' ' 'BDC_CURSOR' 'EXT_PRD-LOW',
' ' 'BDC_OKCODE' '=%012',
' ' 'PLVERS' '000',
' ' 'MD_SYS' p_log,
' ' 'EXTRB' 'X',
' ' 'MO_DEL' 'X',
' ' 'SIM' space,
' ' 'P_LOGDEL' '5'.
Populate the select options screen for product
PERFORM f_populate_bdc_tab USING:
'X' 'SAPLALDB' '3000',
' ' 'BDC_SUBSCR' 'SAPLALDB 3010SCREEN_HEADER',
' ' 'BDC_OKCODE' '=ACPT'.
CLEAR lv_count.
LOOP AT it_loc_data ASSIGNING <lfs_data>.
lv_count = lv_count + 1.
lv_count = 1.
CONCATENATE gc_rscsel gc_l_brac lv_count gc_r_brac INTO lv_fname.
PERFORM f_populate_bdc_tab USING:
' ' lv_fname <lfs_data>-locno.
' ' 'BDC_OKCODE' '=LINS'.
CLEAR lv_fname.
PERFORM f_populate_bdc_tab USING:
'X' 'SAPLALDB' '3000',
' ' lv_fname <lfs_data>-locno,
' ' 'BDC_OKCODE' '=LINS'.
CLEAR lv_fname.
ENDLOOP.
CLEAR lv_count.
LOOP AT it_loc_data ASSIGNING <lfs_data>.
lv_count = 1.
CONCATENATE gc_rscsel gc_l_brac lv_count gc_r_brac INTO lv_fname.
PERFORM f_populate_bdc_tab USING:
'X' 'SAPLALDB' '3000',
' ' lv_fname <lfs_data>-locno,
' ' 'BDC_OKCODE' '=LINS'.
CLEAR lv_fname.
ENDLOOP.
Populate the objects to be deleted on first screen
PERFORM f_populate_bdc_tab USING:
'X' 'APO_BAPI_DEL_TRANS_OBJECTS' '1000',
' ' 'BDC_OKCODE' '=DUMMY',
' ' 'PLVERS' '000',
' ' 'MD_SYS' p_log,
' ' 'EXTRB' 'X',
' ' 'MO_DEL' 'X',
' ' 'MO_STAT' 'X',
' ' 'PO_DEL' 'X',
' ' 'SL_DEL' 'X',
' ' 'ST_DEL' 'X',
' ' 'PIR_DEL' 'X',
' ' 'SIM' space,
PERFORM f_populate_bdc_tab USING:
'X' 'SAPLSPO1' '0500',
' ' 'BDC_OKCODE' '=OPT1'.
**Version 0005
*CTS D7AK900899 New Version code fixed for testaveek28 case.
*MOD-1887120: Code that is changed after the release of transport.
Populate the general selection criteria on first screen
PERFORM f_populate_bdc_tab USING:
'X' 'APO_BAPI_DEL_TRANS_OBJECTS' '1000',
' ' 'BDC_CURSOR' 'EXT_PROD-LOW',
' ' 'BDC_OKCODE' '=%011',
' ' 'BDC_OKCODE' '=DUMMY',
' ' 'PLVERS' '000',
' ' 'MD_SYS' p_log,
' ' 'EXTRB' 'X',
' ' 'MO_DEL' 'X',
' ' 'SIM' space,
' ' 'P_LOGDEL' '5'.
sort it_core_prod by pcode.
delete adjacent duplicates from it_core_prod
comparing pcode.
describe table it_core_prod lines lv_line.
CLEAR lv_count.
LOOP AT it_core_prod ASSIGNING <lfs_data>.
lv_count = 1.
CONCATENATE gc_rscsel gc_l_brac lv_count gc_r_brac INTO lv_fname.
if lv_line > 1.
PERFORM f_populate_bdc_tab USING:
'X' 'SAPLALDB' '3000',
' ' lv_fname <lfs_data>-pcode,
' ' 'BDC_OKCODE' '=LINS'.
CLEAR lv_fname.
ENDLOOP.
*Populate the select options screen for product
PERFORM f_populate_bdc_tab USING:
'X' 'SAPLALDB' '3000',
' ' 'BDC_SUBSCR' 'SAPLALDB 3010SCREEN_HEADER',
' ' 'BDC_OKCODE' '=ACPT'.
sort it_prod_var by pcode prvar.
delete adjacent duplicates from it_core_prod
comparing pcode prvar.
PERFORM f_populate_bdc_tab USING:
'X' 'SAPLALDB' '3000'.
LOOP AT it_core_prod ASSIGNING <lfs_data>.
lv_pcode = <lfs_data>-pcode.
*lv_count = lv_count + 1.
lv_count = 1.
CONCATENATE gc_rscsel gc_l_brac lv_count gc_r_brac INTO lv_fname.
if lv_line > 1.
PERFORM f_populate_bdc_tab USING:
'X' 'SAPLALDB' '3000',
' ' lv_fname <lfs_data>-pcode,
' ' 'BDC_OKCODE' '=LINS'.
CLEAR lv_fname.
describe table it_prod_var lines lv_line.
sort <lfs_data> by locno pcode prvar.
LOOP AT it_prod_var ASSIGNING <lfs_data1> where pcode = lv_pcode.
lv_count = lv_count + 1.
lv_count = 1.
CONCATENATE gc_rscsel gc_l_brac lv_count gc_r_brac INTO lv_fname.
if lv_line > 1.
PERFORM f_populate_bdc_tab USING:
'X' 'SAPLALDB' '3000',
' ' lv_fname <lfs_data1>-prvar,
' ' 'BDC_OKCODE' '=LINS'.
else.
PERFORM f_populate_bdc_tab USING:
' ' lv_fname <lfs_data>-prvar,
' ' 'BDC_OKCODE' '=LINS'.
endif.
CLEAR lv_fname.
ENDLOOP.
ENDLOOP.
Populate the select options screen for product
PERFORM f_populate_bdc_tab USING:
'X' 'SAPLALDB' '3000',
' ' 'BDC_SUBSCR' 'SAPLALDB 3010SCREEN_HEADER',
' ' 'BDC_OKCODE' '=ACPT'.
Populate the select options for the Locations
PERFORM f_populate_bdc_tab USING:
'X' 'APO_BAPI_DEL_TRANS_OBJECTS' '1000',
' ' 'BDC_CURSOR' 'EXT_PRD-LOW',
' ' 'BDC_OKCODE' '=%012',
' ' 'PLVERS' '000',
' ' 'MD_SYS' p_log,
' ' 'EXTRB' 'X',
' ' 'MO_DEL' 'X',
' ' 'SIM' space,
' ' 'P_LOGDEL' '5'.
Populate the select options screen for product
PERFORM f_populate_bdc_tab USING:
'X' 'SAPLALDB' '3000',
' ' 'BDC_SUBSCR' 'SAPLALDB 3010SCREEN_HEADER',
' ' 'BDC_OKCODE' '=ACPT'.
CLEAR lv_count.
LOOP AT it_loc_data ASSIGNING <lfs_data>.
lv_count = lv_count + 1.
lv_count = 1.
CONCATENATE gc_rscsel gc_l_brac lv_count gc_r_brac INTO lv_fname.
PERFORM f_populate_bdc_tab USING:
' ' lv_fname <lfs_data>-locno.
' ' 'BDC_OKCODE' '=LINS'.
CLEAR lv_fname.
PERFORM f_populate_bdc_tab USING:
'X' 'SAPLALDB' '3000',
' ' lv_fname <lfs_data>-locno,
' ' 'BDC_OKCODE' '=LINS'.
CLEAR lv_fname.
ENDLOOP.
CLEAR lv_count.
LOOP AT it_loc_data ASSIGNING <lfs_data>.
lv_count = 1.
CONCATENATE gc_rscsel gc_l_brac lv_count gc_r_brac INTO lv_fname.
PERFORM f_populate_bdc_tab USING:
'X' 'SAPLALDB' '3000',
' ' lv_fname <lfs_data>-locno,
' ' 'BDC_OKCODE' '=LINS'.
CLEAR lv_fname.
ENDLOOP.
Populate the objects to be deleted on first screen
PERFORM f_populate_bdc_tab USING:
'X' 'APO_BAPI_DEL_TRANS_OBJECTS' '1000',
' ' 'BDC_OKCODE' '=DUMMY',
' ' 'PLVERS' '000',
' ' 'MD_SYS' p_log,
' ' 'EXTRB' 'X',
' ' 'MO_DEL' 'X',
' ' 'MO_STAT' 'X',
' ' 'PO_DEL' 'X',
' ' 'SL_DEL' 'X',
' ' 'ST_DEL' 'X',
' ' 'PIR_DEL' 'X',
' ' 'SIM' space,
PERFORM f_populate_bdc_tab USING:
'X' 'SAPLSPO1' '0500',
' ' 'BDC_OKCODE' '=OPT1'.
CLEAR gv_msg_error.
lv_ctu_params-nobinpt = space.
lv_ctu_params-dismode = gc_mode_e.
lv_ctu_params-dismode = 'A'.
lv_ctu_params-updmode = 'S'.
lv_ctu_params-racommit = 'X'.
Call Transaction /SAPAPO/BP2
CALL TRANSACTION gc_bp2 USING ct_bdc_data
OPTIONS FROM lv_ctu_params
MESSAGES INTO lt_msg_tab. -
Not able to view the journal options in HFM
Hi Experts
1. Journal posted but am not able to view the journal option in the left handside. What would be the reason?
regards
SmileeHi,
Can you check once access rights of your login credentials.
Regards,
Sasi -
How to view the History of a Crystal Reports iView in EP6?
How to view the History of a Crystal Reports iView in EP6?
Our Crystal reports are viewed via Crystal Enterprise and are both BW and non-BW Crystal reports.
I have looked at the three supplied iViews from Business Objects (alert, folder and thumbnail) but I have only been able to access the last instance or run on demand a CR.
Our users would prefer to see a listing of the past runs of the report and choose which report to view. What parameters need set in the EP6 iView to see the history of a report?Hi Heather,
it is correct that there is no sample iView that shows the History of Crystal Reports that are stored in Crystal Enterprise but there a sample codes on our web site and there are sample codes as part of the SDK documentation that show how to call the history and you should be able to take the code and create your own Java or ASP iView based on that.
the link to our developer library :
http://www.businessobjects.com/products/dev_zone/default.asp?intcmp=products12
hope this helps
Ingo -
The problem occur when using BEx excel and running any report. I'm unable to use "Change Query (local view)", when clicking on this, I receive the following error message :
Error in execution '339':
Component 'richtx32.ocx' or one of its dependencies not correctly registered: a file is missing or invalid
What has gone bad ? Is it my SAP GUI ??
thanks
D BretIt is the front end that is gone bad. You can check this by opening up BEX analyzer. From the menu option
Business Explorer --> installation check.
This will open up a spread sheet, hit the start tab, this will run a macro to check the front end installation and will tell you which file has gone bad.
Hope this helps
Cheers
Amol -
Issue in pulling the execution plan from awrsqrpt report.
Hi All,
In my production database , recently we faced some performance issue in daily job and i like to pull the old execution plan of that particular job from awrsqrpt.sql report but i got below error.
Interesting information is i can able to generate the addm reports & awr reports between the same SNAP id's Why not AWRSQRPT report ???.
Version : Oracle 11gR2
Error :
+++++++++
Specify the SQL Id
~~~~~~~~~~~~~~~~~~
Enter value for sql_id: b9shw6uakgbdt
SQL ID specified: b9shw6uakgbdt
declare
ERROR at line 1:
ORA-20025: SQL ID b9shw6uakgbdt does not exist for this database/instance
ORA-06512: at line 22
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
Old history of SQL id :
++++++++++++++++++++
SQL> select distinct SNAP_ID,SESSION_ID,SESSION_SERIAL#,USER_ID, SQL_EXEC_START from dba_hist_active_sess_history where sql_id='b9shw6uakgbdt' order by SQL_EXEC_START;
SNAP_ID SESSION_ID SESSION_SERIAL# USER_ID SQL_EXEC_
13095 1026 23869 86 29-AUG-12
13096 1026 23869 86 29-AUG-12
13118 582 14603 95 30-AUG-12
13119 582 14603 95 30-AUG-12
13139 708 51763 95 30-AUG-12
13140 708 51763 95 30-AUG-12
13142 900 2897 86 31-AUG-12
13143 900 2897 86 31-AUG-12
13215 1285 62559 86 03-SEP-12
13216 1285 62559 86 03-SEP-12
13238 1283 9057 86 04-SEP-12
13239 1283 9057 86 04-SEP-12
ThanksHi,
Are you using a cluster database (RAC), and running this report on the wrong instance?
This report validates the SQL ID you specify against the dba_hist_sqlstat view, so check there if you have that SQL ID:
select dbid, instance_number, snap_id
from dba_hist_sqlstat
where sql_id='b9shw6uakgbdt';Regards.
Nelson -
Error when used GOTO option in Web Report which is published in EP
Hi All,
I ran the report Process Chain Status report in EP and I got the data for that.When I right click on the one process chain and clicked GOTO option ->clicked on Process Chain Log and its giving the following error.Pls help me out regarding this.
---Error when processing your request -
What has happened?
The URL .... was not called due to an error.
Note
The following error text was processed in the system XXX: Template interpretation cancelled, syntax error.
The error occurred on the application server xxx_yyy and in the work process 1 .
The termination type was: RABAX_STATE
The ABAP call stack was:
SYSTEM-EXIT of program SAPLRSRR_WEB
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system xxx in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server xxx_yyy in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 1 in transaction ST11 on the application server xxx_yyy . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-https -c: 500 -u: XBW -l: E -s: xxx -i: xxx_yyy -w: 1 -d: 20091208 -t: 113254 -v: RABAX_STATE -e: ITS_CANT_LOAD_INCLUDE
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Your answers will be very much helpful for ontime delivery.
Thanks in advance,
BI UserHi,
I guess you can refer this SDN thread
Error running SOAMANAGER
Rgds,
Murali -
SAP Trans.Code-To view the previous month's OSP Report
Pl.mention the SAP trans.code for view the OSP status as on previous month.For an example,I want to see the status of OSP stocks as on 30.11.2010.How can I see?From MBLB,we can see the current OSP stock status.Is there any trans.Code for view the previous month OSP stock status?
Regardshi,
there is no t code specific to your requirement, but you can get the details through MB51, by metioning repective date and movement types like 541,543 etc..
hope this will help..
Regards
Manohar -
Error at the time of opening XL reports
Hi All,
I am facing error when i am opening XL reporter reports.
The error is "Security setting in microsoft excel prohibit XL reporter from running"
which options i have to update from microsoft excel?
Pls help me.
Thanks.
Nilay ShahHi Nilay.......
Please check this Link......
http://www.dummies.com/how-to/content/how-to-set-the-macro-security-level-in-excel-2007.html
In the above link look at the first Screen Shot where you have to Select Last Option of Macro Setting that is Enable Macros and also Tick on VBA Projects under Developer Macro Setting
Regards,
Rahul -
Attempting to print multiple copies of a report using duplex printing
Selecting paper size in the first sreen tellis iPhoto what papery you are going to use - it does not tell the printer what paper to use - printer specific options on on the last (second or third if you customize the print) screen where you tell the print any specifics like paper source (typically printers need to you tell them where a specific paper is loaded - they do not really know the sizes in each paper tray)
LN -
JSPM DIR_EPS_ROOT error during the execution of the JSPM_PROCESS phase
dear sap experts
I tried to use JSPM in order to update kernel and support packages.
unfortunately i got errors..
"Cannot initialize application data. could not extract value with key DIR_EPS_ROOT from file
c:/usr/sap/SM4/SYS/profile/SM4_DVEBMGS01_solman40. "
I linked some screenshots document.
<a href="http://itedu24.net/solman/5.8 Applying the Latest Kernel and Support Packages.doc">5.8 Applying the Latest Kernel and Support Packages.doc</a>
as you can see, txn RZ11, i can see the value of DIR_EPS_ROOT.
*. it's another question.
I found j2ee/dbdriver value
it looks like this.
C:/usr/sap/SM4/SYS/exe/uc/NTI386/mssjdbc/base.jar;~~~bulabula..
Is it okay if the format of path is "C:/usr/sap/" rather than "C:\usr\sap\"
thanks.
david
Message was edited by: David Kang (.) SAP@HomeHi David,
It seams that you have not run JPSM as <sid>adm.Please try to run it as <sid>adm
Best Regards
Nina Petrova
NW LM SL SDT JS (BG)
Sap Labs Bulgaria Ltd.
Error reports: CSS component BC-UPG-OCS-SPJ -
Error in the execution of custom billing extension in PA module
Hi All ,
We had a requiremnet for creating the custom billing extension similar to the standard Revenue calculation billing extension . The change required in the formula for calculating the revenue was the Actual total burdened cost will be the Actual total burdened hours and Budgeted baselined burdened cost will be the Budgeted baselined burdened hours .Rest of the entity in the standard revenue calculation program will be as per the standard revenue billing extension.
The standard formula is as follows :
(1) revenue amount = Lesser of (Remaining Funding Available if hard limit used) and ((AC / BC (BR – ER) – AR)
I created a package which will get the value of AC and BC as per the client requirement . Defined the Extension using PROJECT BILLING SUPERUSER >> SETUP>> Billing >> Extension screen .
This extension was then assigned to a project type . WE created a project using the same project type . When we fire PRC: Generate Draft Revenue for single project and pass the project number it first calls the Standard billing extension and then the custom one becoz of this there is error in calculating the revenue through it .
We are not sure where we are going wrong . The standard extension has been end dated too ..still everytime it executes the standard and then the custom one .
Has one faced such issue ? Request for some pointers to solve the issue.
Thanks and Regards
MNHi,
My issue got solved. It was beacause there was a method in a Bean Interface which did not have an implementation in the Bean EJB.
appc just gave a NPE.
The issue came out when i did a weblogic.ejbc.
Thanks. -
The Manager Requests competitors encountered an error during the execution
Hi
Once i try to execute the conucrrent program i got this error , can u plz help what is this error in log file also i did not get any error message.
How to check where is this error is occured in program.
Thank'sHi
Now also it is working to day 50 percent programs got errored and remaining 50 percents got completed normal and just now i checkcode also
in the code it self they worte one insert program to insert the data from requisitin headers table with approved data.in this created by column is selected requisition created by column,my doubut in the error it is showing requisition header_id,i query based on this requisition header id i got created by as value.but it is showing error.
Thank's -
Error during the execution of a planning function in BI 7
Dear All,
I created an input ready query and took it into a workbook.
I have to execute a planning function (by a button) which calculates some new data but I get the following error after I clicked on the button message:
Error when inserting or changing in a sorted table
And the BW server closes the connection.
Any help?
Thanks in Advance,
DezsoYou seem to be having a multi-mapping involved.
The operation mapping has to produce at least the start and end tag.....even if the entire message is not present
Ex:
<SRC>
<First>
<Middle>
<Last>
</SRC>
If above is the structure, then it should be ensured that at least <SRC></SRC> is created by your mapping program....however in your case this is not happening....the tags that you see Messages and Message1 are due to the multi-mapping program and your message should be more than this.
if you say that occurence is 0..1 then what you can do is map this 0..1 node (root) with at least a blank Constant.
Unless you create a message (even though empty) you will continue to receive the error message.
Regards,
Abhishek.
Maybe you are looking for
-
Map does not work on my iPad air 32?
I downloaded flightradar24 app and the maps do not show in any detail and satellite is not working at all. Despite multiple downloads it still won't work. I now see my apple Maps app that came loaded with my new iPad Air 32 does not work. My friend
-
Error while upgrading 11.5.10.2 to R12.1.1
Hey Friends, Im trying to upgrade a 11.5.10.2-10gr2 DB on Solaris SPARC to R12.1.1. I am getting the following error in the log work. Table Name is POS_EXASN_LPNS Table exists in the target database Checking for differences Number of columns for the
-
MSI DVD stuck.... any ideas please?
Hi..... my MSI DVD player in my pc has died! Any ideas how to bring it back..... nothing happens.... no lights... nuffin! Cheers.... Tim
-
Convert sql select statement to oracle
Hi All, Can anyone help me converting this Sql select statement to oracle .... -----------------------------------------Query-------------------------------------------------------------- select emp_master.emp_code , emp_master.dept_cd , attendance_m
-
Xcelsiues 2008, working with live data help!!!
Ok, so i have flynet designer for web services. All this is working correctly. i have setup a test query just to check everything is working so i just pulled out some customer info name, account number etc. I generated the webservice succesfully and